CBBE 3BBB Advanced

[Adeladen]

12 minutes ago, Altaïr-Qu-Ten said:

Yes, in bodyslide all looks normal and I uneqipped everything, which shouldn't even be an issue in the first place, since CBBE does work with my things equipped. And yes, I have built outfits for both bodies, which also worked perfectly with CBBE...

1. Check to make sure 3BBB is enabled and on the very bottom of your mod list.
2. Use bodyslide again to build the body, then search for femalebody_0.nif and see what the date modified is, make sure all of them were modified when you ran bodyslide. I still think this is what's happening. If you're using mod manager it has a override for the body, it's possible your bodyslide is only saving to the skyrim directory and not the override. Save to both to be safe.

[pikarooh]

Hey, do you have any plans for the anus for future releases? (to make it to react on physics).

[Varithina]

13 hours ago, Altaïr-Qu-Ten said:

I just converted to 3BBB A and the boobs are way too big in the game, even with 3BBB overwriting all mods, SGO morphs shut off, Sliders all on 0 and Bodyslide looking how it should... Any solutions?

From what I remember SGO pretty much says the only morphs it sees are cbbe and tbd, or at least I do have the vague memories of it poping up in a notice box the first time it was run.

[D4ni]

5 hours ago, koz0r said:

Hello first it´s a very nice work and look good. I have a little Problem i can Build the 3BBB Body Amazing in Bodyslide Studio with my CBEE Preset and  ingame it´s show and work on the Character but i can not Build the 3BB Amazing Body SMP ON Player. When i select it all my CBEE Presets are invisible in Studio and i cant Build it. So the Physics are  Build on the Standard Prest in this Mod. 

 

Has anyone an idea? Thank you.

+1

[Acro748]

8 hours ago, koz0r said:

Hello first it´s a very nice work and look good. I have a little Problem i can Build the 3BBB Body Amazing in Bodyslide Studio with my CBEE Preset and  ingame it´s show and work on the Character but i can not Build the 3BB Amazing Body SMP ON Player. When i select it all my CBEE Presets are invisible in Studio and i cant Build it. So the Physics are  Build on the Standard Prest in this Mod. 

 

Has anyone an idea? Thank you.

 

2 hours ago, D4ni said:

+1

 

Add 3BBB group by saving the preset file again.

In the next version, will be able to choose whether to use the 3BBB group.

 

[chevalierx]

1 hour ago, Acro748 said:

 

 

Add 3BBB group by saving the preset file again.

In the next version, will be able to choose whether to use the 3BBB group.

 

xpmse slider in  racmenu  not work breasts and butt but work for arms and other stuff

[Adeladen]

I'm having some trouble converting an outfit. I select new project, select SE 3BBB Amazing.osp, select the outfit.nif, delete the CBBE body, delete the bones I'm supposed to, fix the clipping, click the outfit and press copy bone weights, unselect every slider except labia puffiness and CBPC, press CTRL C and then save the project by overwriting the old outfit. When I open up bodystudio the body uses the default 3BBB or CBBE body, I'm not sure which, and none of the sliders do anything, and the vagina is see through.

Please help

 

Another thing, is belly bulge supposed to be on by default or? It's not working for me, vagina collision and belly physics work fine though.
Edit: nvm it does work but the collision is wonky, sometimes it won't trigger even tho it should, it just depends on the position of the dick.

[JTesfer]

I have something sticking out of my back when I move. I read that it was because I was using a skeleton that doesn't have an anus, but I'm using XPMSSE and nothing is overwriting? Did I miss a requisite patch or something?

[Twycross448]

Anybody happen to know if there is a conversion for 3BA of the Tera Rogue Armor (https://www.nexusmods.com/skyrimspecialedition/mods/18171) already?

[greenmango12]

Q8. Are you planning vanilla armor and clothes for CBBE 3BBB Advanced?
A. Yes,  it was completed here : CBBE 3BBB Advanced Bodyslide Conversion of the BD Armor and Clothes replacer.

 

Congrarulate,, and and,,, many thanks you  ?

 

Then I shame me, why I could not help conversion,,at all,,  I assume  you convert all one by one,, by your self,,

 ,, anyway I can not find good word to Thanks you to  take a many time as one  3bbb user. ☺️?

 

 

[Adeladen]

6 hours ago, JTesfer said:

I have something sticking out of my back when I move. I read that it was because I was using a skeleton that doesn't have an anus, but I'm using XPMSSE and nothing is overwriting? Did I miss a requisite patch or something?

Is 3BBB and XPMSSE on the bottom of your mod order? Do you have the required mods CBPC & normal CBBE? Did you build the body in bodyslide? 

[General Neondaze]

7 hours ago, JTesfer said:

I have something sticking out of my back when I move. I read that it was because I was using a skeleton that doesn't have an anus, but I'm using XPMSSE and nothing is overwriting? Did I miss a requisite patch or something?

Are you using FNIS Sexy Move with 360 animation? If so turn off 360 or use a sexy move anim of 4 or lower. 

[JTesfer]

5 hours ago, General Neondaze said:

Are you using FNIS Sexy Move with 360 animation? If so turn off 360 or use a sexy move anim of 4 or lower. 

That was it, thank you.

[Psycho_Bill]

@Acro748 hey that issue where the anal sack protrudes the back when walking i had mention a while back, is there an easy fix for that or would the walk animation have to be edited? 

[Acro748]

28 minutes ago, Psycho_Bill said:

@Acro748 hey that issue where the anal sack protrudes the back when walking i had mention a while back, is there an easy fix for that or would the walk animation have to be edited? 

 

It has to edit the animation and use current version of XPMSE's rig file.

Usually, issues related to anus and belly, which are only seen in certain animations, are all using the wrong rig file of XPMSE.

 

Because all the animations using Vanilla's rig files are fine, this shows how ignorant the XPMSE team was before Baka joined the XPMSE team.

 

If you want to know more, you can ask him yourself.

@factoryclose

 

[Acro748]

On 2/10/2020 at 11:08 AM, wpg97541 said:

So I did end up needing the CTD VR fix to completely get rid of CTD's in VR, it is completely stable. If that doesn't cause any other problems, can you simply add that to the base mod?

 

Yeah, it's going to be merge in the next version.
Already checked the cause of VR CTD.

 

On 2/11/2020 at 3:06 AM, chevalierx said:

xpmse slider in  racmenu  not work breasts and butt but work for arms and other stuff

 

Boobs are normal to not work, but butt have to work.

 

On 2/11/2020 at 5:49 AM, Adeladen said:

I'm having some trouble converting an outfit. I select new project, select SE 3BBB Amazing.osp, select the outfit.nif, delete the CBBE body, delete the bones I'm supposed to, fix the clipping, click the outfit and press copy bone weights, unselect every slider except labia puffiness and CBPC, press CTRL C and then save the project by overwriting the old outfit. When I open up bodystudio the body uses the default 3BBB or CBBE body, I'm not sure which, and none of the sliders do anything, and the vagina is see through.

Please help

 

Another thing, is belly bulge supposed to be on by default or? It's not working for me, vagina collision and belly physics work fine though.
Edit: nvm it does work but the collision is wonky, sometimes it won't trigger even tho it should, it just depends on the position of the dick.

 

If you have added a nif file rather than an add project, you must conform all the sliders.

But recommended to don't conform the innie outie slider. It often messes up the panties.

 

[Twycross448]

So, I've tried converting the Tera Rogue outfit myself since I couldn't find an exisiting conversion. Ran into a problem though.

 

Outfit Studio is complaining about unweighted vertices when I try to safe, even when setting the search radius to 9 as mentioned in the short guide in the FAQ.

How high can I safely set the radius without fuckign things up?

[Adeladen]

3 hours ago, Twycross448 said:

So, I've tried converting the Tera Rogue outfit myself since I couldn't find an exisiting conversion. Ran into a problem though.

 

Outfit Studio is complaining about unweighted vertices when I try to safe, even when setting the search radius to 9 as mentioned in the short guide in the FAQ.

How high can I safely set the radius without fuckign things up?

Did you copy weights and conform sliders?

 

9 hours ago, Acro748 said:

If you have added a nif file rather than an add project, you must conform all the sliders.

But recommended to don't conform the innie outie slider. It often messes up the panties.

 

Ah ok thanks I'll give it a shot.

Question for the author: The other day I was annoyed that I had to go into the body of the guy to get a good view of the action, what if there was an x ray mode that always shows the penis and vagina on top of the girl's body? So there's the illusion of it being see through exactly where they are. You might have already thought about this and decided it's not doable, but just in case you haven't

And how do I change the belly bulge so it triggers easier and with a bigger bulge?

Love the mod btw

[OnceALeader]

Help.  The body is not adjusting with the sliders in bodyslide studio or outfit studio

 

[Twycross448]

4 hours ago, Adeladen said:

Did you copy weights and conform sliders?

Yep. Sure did. ?

[Acro748]

4 hours ago, Adeladen said:

Did you copy weights and conform sliders?

 

Ah ok thanks I'll give it a shot.

Question for the author: The other day I was annoyed that I had to go into the body of the guy to get a good view of the action, what if there was an x ray mode that always shows the penis and vagina on top of the girl's body? So there's the illusion of it being see through exactly where they are. You might have already thought about this and decided it's not doable, but just in case you haven't

And how do I change the belly bulge so it triggers easier and with a bigger bulge?

Love the mod btw

 

There were times when folks thought of such an x-ray mod, but no one thought of a way to can it. ?

But there's a way to make the actors look similar by making it translucent. 

 

 

There are 2 ways to make the belly bulge look better than before.

 

1.modify BellyBulgeMax, BellyBulgePosLowest, BellyBulgeReturnTime by opening the CBPCollisionConfig.txt file (The trigger keep, belly shape modified)

You can adjust this to modify the shape of the belly bulge to suit your liking. In this case, you can make it bigger by increasing the BellyBulgeMax.

 

2.Find the node corresponding to BellyBulgeNodes and increase that nodes Radius value (The trigger modified, belly shape keep)

When CDPeniscol 2 node is defined to BellyBulgeNodes, find it and modify it as follows:

 - Open the file that the node (CDPeniscol 2) is defined in. (CBPCollisionConfig_ABC_Canine.txt)

 - Look for a that node of the same name defined in # Collider Nodes

    [CDPeniscol 2]
    0,0,0,3 | 0,0,0,3

 - This means x,y,z,r | x,y,z,r so increase the r value.

 - If increased, it would be more visible even if the belly bulge inserted less Penis than before.

 

You can do both or only one.

 

 

Later, if CBPC v1.4 is updated, I planning to touch it all and make it look better and better than before.

 

[Adeladen]

Sweet thanks, I turned up BellyBulge by 20% and BellyBulgeMax by 40%, will test later to see how that looks.

I also see VaginaOpeningMultiplier & Limit, what does the multiplier do exactly? I've noticed in a few animations it doesn't open because of the position, when it really should, would the multiplier help with that?

 

And sometimes it opens in the wrong direction because of the position, like this:

But there's nothing you could do about that I'm guessing. You'd have to rotate the whole crotch or something.

 

 

1 hour ago, Acro748 said:

Later, if CBPC v1.4 is updated, I planning to touch it all and make it look better and better than before.

 

Great
Thanks for the mod & reply!

[nogoe]

Has anyone else had the issue where the breast physics go crazy during sexlab animations? Not for my character but npcs. Basically at the start of an animation the breasts will seem to be pulled upward by the nipples, then things only git worse from there eventually the breasts turn into a stretched out helicopter rotor.

 

Some testing has revealed the following:

 

Not a framerate issue (tried installing havok fix, nada) and my game runs at solid 60fps.

Everything is up to date.

seems to only affect NPCs with SMP enabled.

Not a load order issue.

 

As stated before, it only affects npc's, player is fine.

 

Ok I fixed it, you have to enable the scaling CTD fix in the sexlab MCM. 

If there is a way to not have to do this I'd appreciate being told how. I really like the even actor height option.

[no_way]

Might be too late for a fix, but it seems that the majority of animations were made with a uunp body in mind, so when this one gets into the action the groin/vagina opening is fairly consistently too far forward on the pelvis to line up with the schlong.

 

Also, how do you get the belly bulge collision to be so smooth up and down? Mine seems to react more as an on/off instead of smooth up and down.

[kalikka]

Started Skyrim SE again after a year long break.

 

I'm trying to get the 3BBB SMP physics to work with Sexy Idle mod. Year ago with plain SMP I managed to get it working decently but with 3BBB I can't seem to get the jiggle back (specifically pushing the bewbs closer together during the animation, and releasing them at the end).

 

3BBB-Amazing.xml should have all the editable settings to get everything working, right? But which settings I should be tinkering with?

The linearUpperLimit/linearLowerLimit (x) should be the ones for editing horizontal movement but they don't seem to work as I intended...

 

EDIT: and now in the middle of installing other mods the collision and physics started working. Need to check if they are working properly, the physics are present even when 3BBB is not activated for the character... 

EDIT2: Oooh... so that's why things were wonky, I didn't have all the stuff installed properly AND I didn't realize that the physics were always enabled with the toggle-spell only affecting if full SMP or CBPC was used.