Manperor Posted September 5, 2021 Posted September 5, 2021 Hi, somehow this mod does not take control of SlaveTats in my game (no body hair growth); is there any fix? 1
Vindos Posted September 7, 2021 Posted September 7, 2021 Well I got it partially working after a day of tinkering around. The hair growth worked well, went from short hair to rapunzel hair(floor length), once it got to the knee length stage it began using the long braid "Traveler" hairstyle(from one of the hair mods like KS Hair or apachii hair) and kept using it through the knee length, calf length, ankle length, and rapunzel length stages(floor length). Are there hairstyles longer than "Traveler" that would work for the rapunzel length(floor length)? I went to the hairstylist and asked for a haircut(and payed) and sat down in the barber chair but the hairdresser never did anything and my hair stayed the same. I ran FNIS and checked a few patches which I believe added a bunch of animations but there were several patches in FNIS that said "no sse version". Has anyone had these issues and does anyone know how to get the hairdresser working? Any help would be greatly appreciated as I feel a bit lost navigating this site. Thanks!
RevanCathal Posted September 7, 2021 Posted September 7, 2021 On 8/21/2021 at 7:15 AM, DarkPancake said: Anyone knows how to get this mod to work with SlaveTats 3.6? It seems that even by following the instructions on OP's post; this SlaveTats version doesn't load any Tats from this mod. Atleast that is the case for me... Â You have to manually "add" in game once. Then it will work. 1
Vindos Posted September 14, 2021 Posted September 14, 2021 I got everything figured out, not exactly sure what made things work. Part of my issues. though not all of them, related to debug mode being automatically turned on in Sexlabs, or maybe sexlabs arousal, I've had to reset it each time I play as it always seems to default to debug mode on. Great mod, thanks to all involved for creating and maintaining it! 1
Zeramik231 Posted September 26, 2021 Posted September 26, 2021 On 7/9/2021 at 3:45 PM, MilanJa said: Can somebody upload Kaws Claws Bodyslide. its disabled on nexus and my bs always miss kaws claws cbbe se black.nif ? thanks Kaw Claws Bodyslide CBBE SE.7z Dunno if you still need it, founded it in my modlist. Hope that what are you looking for. 2
angar3 Posted September 26, 2021 Posted September 26, 2021 Is someone up for making json for https://www.nexusmods.com/skyrimspecialedition/mods/31405 ?
angar3 Posted September 27, 2021 Posted September 27, 2021 I've made json's for to mods: 1 -  https://www.nexusmods.com/skyrimspecialedition/mods/31405 2 - https://www.nexusmods.com/skyrimspecialedition/mods/18566?tab=description I tested some of them with hairstyle catalog and everything works fine.  YunDao_Hdt_hair.esp.json GMsHair aXing.esp.json 4
Sucker343 Posted October 19, 2021 Posted October 19, 2021 Currently using COtR race and face overlays, face piercings are all messed up. Anyone can provide any tutorial to fix them manually?
eicosa Posted October 19, 2021 Posted October 19, 2021 On 6/30/2021 at 9:29 AM, delgathar said: I made a json for the SMP version of saLa found at the linked page. Enjoy. Just overwrite the json sse packet from the download page. saLa SMP hair json.7z 1.42 kB · 36 downloads  edit - for some reason this file breaks yps fashion even though as far as I can tell everything is correct. Could someone look at it and tell me what is wrong? Am I missing another file or what? Thank you,  Missing comma in ypsHairDatabase.json. Keep in mind you might want to merge the jsons manually by adding the .esp names in yourself, rather than copying over the one already there, otherwise hair mods might not merge into yps correctly
foreveraloneguy Posted October 29, 2021 Posted October 29, 2021 Slavetats 1.37 SE... I can manually apply yps tats but when yps itself applies them, they don't show up.
monsta88 Posted November 5, 2021 Posted November 5, 2021 (edited) Hi,  The quest with the Devious Chastity Piercing is not available in SE? I mean, the quest is there, but I can't find the piercing converted to SE.  Edit: I used CAO and it worked fine enough. Edited November 5, 2021 by monsta88
ck2modfan Posted November 8, 2021 Posted November 8, 2021 Using SOS NPC UBE Female Pubics v2.0.4. I am not getting the PC hair to change as stages change.  When starting, should PC (in SOS config) have no SOS or have set as shaved? Would appreciate the correct steps to make visual match popus and notifications. 1
Tlam99 Posted November 8, 2021 Posted November 8, 2021 (edited) 2 minutes ago, ck2modfan said: SOS or have set as shaved? Would No schlong In Yps set slave tats slots as blocked Edited November 8, 2021 by Tlam99 1
lanaya1437 Posted November 15, 2021 Posted November 15, 2021 A word of advice: turn off the "Frequent Hair Check" option. It caused an FPS stutter every 10 seconds, couldn't figure out what was causing it, it turns out it was this. Strange, it never did do this on my previous modlists, and they were quite a bit lighter than my current one. Â Also, a question: is there a way to "reset" this mod? I accidentaly clicked "No" on the first prompt without realizing it, and now I can change my hair style anytime, even if I enable the "Hair Control" option in the MCM. Do I need to do something else as well?
RevanCathal Posted November 15, 2021 Posted November 15, 2021 On 10/28/2021 at 10:15 PM, foreveraloneguy said: Slavetats 1.37 SE... I can manually apply yps tats but when yps itself applies them, they don't show up. Are you running Devious Devices?
RevanCathal Posted November 15, 2021 Posted November 15, 2021 14 minutes ago, lanaya1437 said: A word of advice: turn off the "Frequent Hair Check" option. It caused an FPS stutter every 10 seconds, couldn't figure out what was causing it, it turns out it was this. Strange, it never did do this on my previous modlists, and they were quite a bit lighter than my current one. Â Also, a question: is there a way to "reset" this mod? I accidentaly clicked "No" on the first prompt without realizing it, and now I can change my hair style anytime, even if I enable the "Hair Control" option in the MCM. Do I need to do something else as well? Yes. To Enable Hair growth simply choose to do so in either the MCM setting page for head or body. Doing so will activate the pop up that asks you what you want to control. When I utilize this mod I tend to leave it disabled when I plan on doing the Vanilla Start due to any scripting mod that changes anything to do with your head (this or Sexlab Blushes) screws up that intro. Also, don't use this alongside Sexlab Blushes, as neither are compatible with each other.
RevanCathal Posted November 15, 2021 Posted November 15, 2021 Just going to suggest updating this for the SE version of SOS - Pubic Hair For Females Addon as this mod doesn't seem to properly distribute them after the last stage for the Nordic Warmaidens body hair growth level.
gregaaz Posted November 16, 2021 Posted November 16, 2021 Hi folks, I was doing some testing today and I noticed that the nipple piercings were shifted down slightly on my character. I'm using BHUNP. Is anyone else running into this? I'm assuming that the issue is that the body piercing textures are rigged for a CBBE body, but that's just a guess. I'd be interested in learning what solutions have worked best for folks so I can minimize the amount of trial and error I have to do.
blodtanner Posted November 18, 2021 Posted November 18, 2021 For those using   SOS NPC Female Pubics v2.0.4 I created a small patch. This mod needs to go after every other patch to yps. Make sure to use SOS in yps for the body hair.   yps-sos-fix.7z 4
Necronis74 Posted November 21, 2021 Posted November 21, 2021 got a problem getting an error when trying to reinstall "an error has occurred during the instillation of the script . this is probably due to an incorrect script file (wizard.txt )in the archive Line 1, Column 3: Argument at position 0 has incorrect type for CompareWBVersion, expected string got integer." used this before so have no idea whats wrong now from what i can figure its talking about wrye bash witch I have installed already any ideas or should i just install it manually and if so what goes where thanks for any help in advance
Fuzzy_Fox Posted November 22, 2021 Posted November 22, 2021 21 hours ago, Necronis74 said: got a problem getting an error when trying to reinstall "an error has occurred during the instillation of the script . this is probably due to an incorrect script file (wizard.txt )in the archive Line 1, Column 3: Argument at position 0 has incorrect type for CompareWBVersion, expected string got integer." used this before so have no idea whats wrong now from what i can figure its talking about wrye bash witch I have installed already any ideas or should i just install it manually and if so what goes where thanks for any help in advance Are you using the AE version of Skyrim? If so then it will be the cause. If not then I don't know.Â
Necronis74 Posted November 22, 2021 Posted November 22, 2021 did download the AE version but used the patch to roll it back to the previous version so that might have been the issue. either way I just deciced to switch to AE so no big deal now but good to know thanks for the reply Â
Machev Posted November 23, 2021 Posted November 23, 2021 Anyone have the lite version(no DD, no SL) ported to SE? If not, know how I may go about porting it myself? I dunno it's as easy as using CAO and saving through CK. 1
Michele Magus Posted November 23, 2021 Posted November 23, 2021 On 11/21/2021 at 4:55 PM, Necronis74 said: got a problem getting an error when trying to reinstall "an error has occurred during the instillation of the script . this is probably due to an incorrect script file (wizard.txt )in the archive Line 1, Column 3: Argument at position 0 has incorrect type for CompareWBVersion, expected string got integer." used this before so have no idea whats wrong now from what i can figure its talking about wrye bash witch I have installed already any ideas or should i just install it manually and if so what goes where thanks for any help in advance  The problem is in the first section of Wizard.txt inside of yps-ImmersiveFashion(6.2.1).7z Replace it with this one. It has been buggered for a few years now. The rest of Wizard.txt after it is fine.  If CompareWBVersion("304") < 0   Cancel "Wrye Bash outdated outdated.\nPlease update to the latest version before installing this mod." EndIf ;If CompareGameVersion("1.9.32.0") < 0 ;   Cancel "Skyrim version outdated.\nPlease update to the latest version before installing this mod." ;   FatalError ;EndIf  1
RevanCathal Posted November 24, 2021 Posted November 24, 2021 On 11/23/2021 at 9:23 AM, Machev said: Anyone have the lite version(no DD, no SL) ported to SE? If not, know how I may go about porting it myself? I dunno it's as easy as using CAO and saving through CK. What's the difference between this and the lite version?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now