Devious Devices SE

[dannyel.nm]

anyone knows how to solve the "decodification error" in mega

whenever i try to download anything from mega  i got this error.

[Grimmdal]

1 minute ago, dannyel.nm said:

anyone knows how to solve the "decodification error" in mega

whenever i try to download anything from mega  i got this error.

 

 download the free mega app for your desktop, no more interrupted downloads and no cap on GBytes

[Grimmdal]

41 minutes ago, Grimmdal said:

Hi, im having T-Pose problems i am not able to fix.

 

 

I used DD and co on oldrim and NMM without problems, now switched and am working on a fresh installation of SSE with vortex. After some trouble i got a little bit used to the new modmanager, however after having most basics installed and got to the kinky stuff... i have T pose problems i could isolate towards the Devious Devices Mods.

 

- I did use Fnis, manually and automaticly ( with vortex and ticked patch for DD) before and after installation, multiple times by now

- I did use Bodyslide

- I checked thoroughly if the problem is still there without the mod, its not.

- No known incompabilties with other mods ( i used same mods on oldrim and i am just at the basic mods right now)

- I checked for loot messages but it just tells me its not made for SSE nothing more,  but DD is definetly the SE version and the others have this one as its master so i assume they are as intended too.

 

I dont know what else it could be, it must be FNIS or incompability , i do use prettier fight animations but that worked on oldrim too with DD.

 

Edit:

 

Fnis gives the warning message as vortex, "not made for SSE might not work as intended"

 

 

Anyone can help me in this urgent matter , i cannot continue without the backbone that DD is

[zarantha]

52 minutes ago, Grimmdal said:

 

 

Anyone can help me in this urgent matter , i cannot continue without the backbone that DD is

 

DD is now an all in one installer. Remove DDa, DDi, DDx, DDc, DD for Him, and/or DD BRRF if you have them installed separately. Nothing should be overwriting any of the DD mods.

Make sure you are installing only DD SE from the first post on this thread.

[Grimmdal]

7 minutes ago, zarantha said:

 

DD is now an all in one installer. Remove DDa, DDi, DDx, DDc, DD for Him, and/or DD BRRF if you have them installed separately. Nothing should be overwriting any of the DD mods.

Make sure you are installing only DD SE from the first post on this thread.

 

Oh God, thank you. and respect for coming to that solution so quick with that little information. It does work now and things do make more sense now

[zarantha]

5 hours ago, Grimmdal said:

 

Oh God, thank you. and respect for coming to that solution so quick with that little information. It does work now and things do make more sense now

 

You actually included the one bit needed - "not made for SSE might not work as intended". If you ever see that, it means you installed an unconverted mod that has animations.

 

Cathedral Assets Optimizer CAO will do the conversions for mesh, textures, and animations if the mod doesn't have an SE version. But if there's an SE version it's recommended to use that unless you know what you're doing. For DD, it's not a straight conversion, the CBBE bodyslides and dll still need updated. So the fact you had LE animations meant something was overwriting DD SE, and most times it will be because one or more of the old LE mods was installed.

 

Anyway, just keep that FNIS warning in mind when installing other mods from LL. Unconverted meshes or BSAs can cause CTDs and unconverted animations will Tpose you. The form 43 warning can be ignored for 99% of the conversions, including DD. I don't recommend resaving the DD ESMs to  convert them too, as it will cause new errors when saving.

 

Take a look at the tracking thread too if you haven't found it already.

 

Edited July 10, 2021 by zarantha

[hungvipbcsok]

Look like I build bodyslide wrong, but I don't really know wrong where. Anyone can help me?mod list 1.txt

[hungvipbcsok]

18 minutes ago, hungvipbcsok said:

Look like I build bodyslide wrong, but I don't really know wrong where. Anyone can help me?mod list 1.txt

Fixed! Sorry everyone no need to bother this. It was my bad, I use 3BA body but CBBE DD so it clip. I up all DD to 3BA and the problem is gone. Downloaded SE a week ago and still this is my first try though. Lots of thing to fix.

[hungvipbcsok]

So another problem occur. The nipple piercing is not moving with the motion of the breast. Anyone know how to fix it?

[zarantha]

10 minutes ago, hungvipbcsok said:

So another problem occur. The nipple piercing is not moving with the motion of the breast. Anyone know how to fix it?

 

If you built the 3ba version, it should be moving with it, but won't have physics. None of the piercings has physics yet.

 

If you mean not moving when the breasts bounce, try building these one at a time and check the output paths.

 

soul gem piercing = DDA - 3BA - PiercingsN

nipple clamps = DDX - 3BA - NippleClamps01

ring piercing = DDX - 3BA - Piercing01

 

They should be going to \meshes\devious\Heretic\Piercings

Make sure your preset shows under the outfit name when you try building them. If you use a custom preset, you'll need to add it to your preset group.

[ChandraArgentis]

On 7/9/2021 at 12:16 AM, Elsidia said:

First you must check one message above in this post - there is solution. Also check troubleshooting page with link in the same post, maybe there you found more answers for other problems.

But answer is install Mfgfix mod.

That did it, thanks.

[Bones]

So I installed DD and my character's animations aren't working, within racemenu the character just hovers in an a pose. I use Nemesis and it also says that it can't fix/generate/etc DD's files. I'm wondering if there is a fix or if I'll be going back to FNIS.

 

[Tron91]

6 minutes ago, Bones said:

So I installed DD and my character's animations aren't working, within racemenu the character just hovers in an a pose. I use Nemesis and it also says that it can't fix/generate/etc DD's files. I'm wondering if there is a fix or if I'll be going back to FNIS.

 

Use FNIS for DD for now.

[Bones]

Just now, Tron91 said:

Use FNIS for DD for now.

Ah, goodbye Movement Behavior Overhaul.

[hungvipbcsok]

8 minutes ago, Bones said:

Ah, goodbye Movement Behavior Overhaul.

Well, it is technically can use both FNIS and Nemesis if you set up animation so that nothing overlap. But since DD Fnis edit the moving animation, that mod is definiately not working with DD

[Bones]

So that's the issue, well I'll be honest I want cool movement instead of movement restriction. Thanks for the advice though!

[mikesolo1975]

i hope one day there are DD 5.1 bodyslides for cbbe 3bbb full support.?

[judge007]

+1

[Celedhring]

On 7/4/2021 at 11:15 AM, zarantha said:

 

Just to be clear, in place upgrades aren't supported for major versions, going from 4.x to 5.x requires a new game. If you used Fallrim Tools to clean your save, you may be ok, but it's still not recommended.

Haven't encountered any serious issues to date and I used Fallrim Tools to clean my saves after uninstalling the older version for the latest DCL.  Been supplying my followers with collars so they trigger the "collared only" setting for Aroused Creatures so other female NPC's who are usually uncollared don't get drawn in. 

 

[zarantha]

7 hours ago, Celedhring said:

Haven't encountered any serious issues to date and I used Fallrim Tools to clean my saves after uninstalling the older version for the latest DCL.  Been supplying my followers with collars so they trigger the "collared only" setting for Aroused Creatures so other female NPC's who are usually uncollared don't get drawn in. 

 

 

That was more or less a rephrase of Kimy's policy. She has never supported upgrading on the same save between major versions for DD or DCL. If you're not having issues yet, that's good, but it still won't be supported per her policy.

[ChandraArgentis]

On 6/29/2021 at 3:13 AM, Elsidia said:

I don't found any HDT loading error in your log. Maybe i'm blind. Also your log is more clean as my. But i don't have CTD on that quest.

Test one thing in game - enter in console and type:

  Reveal hidden contents

help "maid chains"

Write down id

player.additem XX0e8084 1 where XX is your DCL hex load order.

Exit from console and put on maid chains. It CTD?

 

And second question: Are you Khalit or Argorian?

 

 

Doing another playthrough as a Khajiit, and getting crashes on the Chloe quest again when I put on the gear for Nazeem.  So, what's specific to Khajiit, and how do I fix it?

[zarantha]

29 minutes ago, ChandraArgentis said:

 

Doing another playthrough as a Khajiit, and getting crashes on the Chloe quest again when I put on the gear for Nazeem.  So, what's specific to Khajiit, and how do I fix it?

 

It's specific to HDT. Build the non HDT prisoner chains in bodyslide.

Edited July 13, 2021 by zarantha

[Elsidia]

3 hours ago, ChandraArgentis said:

So, what's specific to Khajiit, and how do I fix it?

Also for Khajit is specific that those use specifics prisoner chain meshes model. I don't found this meshes into my game. But i don't installed plugin for Beast races and for him.

@zarantha, those model are into Beast races plugin or still not? And model Skyrim use when it's not found for specifics race? Found into Beast races plugin

Edited July 13, 2021 by Elsidia

[zarantha]

7 hours ago, Elsidia said:

Also for Khajit is specific that those use specifics prisoner chain meshes model. I don't found this meshes into my game. But i don't installed plugin for Beast races and for him.

@zarantha, those model are into Beast races plugin or still not? And model Skyrim use when it's not found for specifics race? Found into Beast races plugin

 

Hell, looks like BRRF did change it to a different nif, I forgot about that. There's really no need to do that for those things, but they did...

 

But I've got the argonian and khajiit specific prisoner chains in my loose files that I save for the conversions, so that means I did work on them and should have replaced or fixed them before giving the conversion to kimy, even if I don't remember working on them.

[ChandraArgentis]

11 hours ago, zarantha said:

 

It's specific to HDT. Build the non HDT prisoner chains in bodyslide.

 

I'm still using the build with the non-HDT prisoner chains.  I just confirmed, and it is indeed using that variety.