sophiextime Posted February 1, 2019 Posted February 1, 2019 I cant get HDT to work in my game at all! Not even my girls boobies and bottom cheeks will wobble So animal genitals just feels and sounds like a magical mystery tour to me lmao. I have tried everything but always end up with a non wobbly body and sex. I think i need a foolproof walkthrough for a person like me that is pretty clueless and requires to be told like i am a noob.
-alpha- Posted February 1, 2019 Posted February 1, 2019 i think i mentioned this in a another post somewhere. but this is a good place to start. it has pretty much everything you need with all info on how to install and setup as well. cant go wrong here
Guest Posted February 1, 2019 Posted February 1, 2019 57 minutes ago, sophiextime said: I cant get HDT to work in my game at all! Not even my girls boobies and bottom cheeks will wobble So animal genitals just feels and sounds like a magical mystery tour to me lmao. I have tried everything but always end up with a non wobbly body and sex. I think i need a foolproof walkthrough for a person like me that is pretty clueless and requires to be told like i am a noob. This is how I did it and you may use it or not. It is all up to you. Install all the essentials (you know, XPMSE, FNIS, and all that. I'm sure that you are able to do that. Install using NMM/VORTEX or MO, use whichever you like.). Make sure you run FNIS and check if the skeleton is XPMS2HDT. Otherwise, the butt and the boob would be stretched out and that's a boner killer. If HDT's boob and physics are too much for you (meaning, too bouncy, too unrealistic, etc), there is a mod on Nexus called Subtle HDT, I use that quite a long time ago and I can say that I am very satisfied with it. For the body, just build your body using preferred body preset in BodySlide (a tonne of it, too!). Make sure you choose either CBBE HDT, CBBE BBP, or CBBE TBBP (if you're using CBBE). Otherwise, the guide Alpha shared would be beneficial for you, too.
poblivion Posted February 1, 2019 Posted February 1, 2019 Thank you for the update! Really nice work! ??
Monkito Posted February 1, 2019 Posted February 1, 2019 Big thanks for the update Billy . Again an amazing job. Chauris look damn good, and finally some fox animations
Shubal Posted February 1, 2019 Posted February 1, 2019 The horse dongs be danglin as they never have before, great job!
Guest Posted February 1, 2019 Posted February 1, 2019 OOOOO NEW HORSE ANIMATION, THESE ARE SO WELL DONE PLEASE KEEP UP THE GOOD WORK!
fancydoctor Posted February 1, 2019 Posted February 1, 2019 Okay, so I'm having this issue where when I'm doing a falmer or chaurus animation, my pc is just standing while the falmer and bug are doing the animation. Anyone know what might be the problem here?
Grey Cloud Posted February 2, 2019 Posted February 2, 2019 On 12/12/2018 at 10:00 PM, bigglebojiggle said: Atronach and dwemer machine support? Is there a mod that lets you have a machine as a follower? Or otherwise interact with one (like SL Defeat or something)? Untamed probably does. I use it all the time though I'm not into dwemer stuff or atronachs. I've run with hagravens, draugr, spriggans and all sorts of things.
Grey Cloud Posted February 2, 2019 Posted February 2, 2019 12 minutes ago, fancydoctor said: Okay, so I'm having this issue where when I'm doing a falmer or chaurus animation, my pc is just standing while the falmer and bug are doing the animation. Anyone know what might be the problem here? User error generally.
fancydoctor Posted February 2, 2019 Posted February 2, 2019 12 minutes ago, Grey Cloud said: User error generally. Could you elaborate on that? What do you mean? Anything I could do to fix this? Any advice would really help.
jalingon3011 Posted February 2, 2019 Posted February 2, 2019 Hi we have complete forgot about the Albino Spiders. Perhaps they can have a chance of getting some animations as well?
Tuvalu Posted February 2, 2019 Posted February 2, 2019 2 hours ago, fancydoctor said: Could you elaborate on that? What do you mean? Anything I could do to fix this? Any advice would really help. They mean usually it's your load order, not utilizing FNIS after adding new animations, etc. Without any other knowledge than falmers or chauruses aren't moving there's not much anyone can do to help. Have you tried running FNIS? Have you installed a new mod or new animations perhaps? Etc.
MadMansGun Posted February 2, 2019 Posted February 2, 2019 3 hours ago, fancydoctor said: Okay, so I'm having this issue where when I'm doing a falmer or chaurus animation, my pc is just standing while the falmer and bug are doing the animation. Anyone know what might be the problem here? Quote 2. run/rerun the GenerateFNISforUsers.exe, if you don't the animations wont work/run. C:\Games\Steam\SteamApps\Common\Skyrim\Data\tools\GenerateFNIS_for_Users\GenerateFNISforUsers.exe or C:\Program Files (x86)\Steam\SteamApps\Common\Skyrim\Data\tools\GenerateFNIS_for_Users\GenerateFNISforUsers.exe WARNING: Windows (Vista/7/8/10) Security may interfere with updating/overwriting the FNIS behavior files. you may not even get a error message telling you that this has happened. make sure FNIS and your mod manager (if your using one) are running with administrator privileges. NOTE: try deleting "Data\meshes\actors\character\behaviors\0_master.hkx" and re-running it again, that sometimes helps. Quote 8. you may need to reload the animations, go to the Animation Loader's MCM and then: 8.1. click on the "Disable All" button. 8.2. click on "Rebuild Animation Registry", then Wait for the message to pop up*. 8.3. click on "Reload JSON". 8.4. click on "Enable All". 8.5. click on "Count Animations" and make sure nothing is over 500, turn off some animations if they are. 8.6. click on "Register Animations", then Wait for the message to pop up*. *if you like you can press "~" on your keyboard to open the console so you can watch it Register everything, just make sure you close it before you try to click on anything.
FauxFurry Posted February 2, 2019 Posted February 2, 2019 On 9/9/2018 at 5:25 PM, Ernest Lemmingway said: There's no sexualized mesh, if that's what you're asking. Not that I can blame modders. Who wants to bother with mudcrabs? Even if they do taste good with clarified butter? ...Is anyone else hungry? For a belated answer: There is a sexualized texture so someone did bother with mudcrabs, if only for a laugh. https://www.nexusmods.com/skyrim/mods/4389 There still seems to be no one who finds having crabs anywhere near anyone's genitals to be appetizing, though.
Celedhring Posted February 2, 2019 Posted February 2, 2019 Love the Chaurus and spider animations. Nothing really gets me going like seeing a chaurus or spider "cage up" my PC and mate with her. Or two. Or three of them... 1
timothy1022 Posted February 2, 2019 Posted February 2, 2019 someone can solve my problem ? i downloaded this mod and selected the pack that i want then i update the FNIS . there are only 2pack can be loaded... (i almost select all the pack) t thanks a lot..
Reesewow Posted February 2, 2019 Posted February 2, 2019 On 1/31/2019 at 8:14 PM, Billyy said: Of course it's unfortunate old anims wont benefit, but I at least plan on updating a bunch of my past anims, but not the 'old' ones. That sounds like a great way to refresh some of the older animations - honestly the changes you made to those selected horse animations in the latest were very nice subtle changes that IMO really do add to the animations. Plus the brand new animations are looking great, and already showing some of the power of an having creature parts be fully animated. They worked flawlessly for me, thanks for the continued content.
Monkito Posted February 2, 2019 Posted February 2, 2019 Thanks fot the info @MadMansGun about the abc mod. Well, i will wait before testing this. Sound too much like beta with many problems.
innoculate Posted February 2, 2019 Posted February 2, 2019 12 hours ago, Shubal said: The horse dongs be danglin as they never have before, great job! How do I get this new stuff? Nothing is dangling so far
innoculate Posted February 2, 2019 Posted February 2, 2019 2 hours ago, Caenraes said: You need the ABC mod. Only a few animations use it at the moment. Working! Thanks!
Guest Posted February 2, 2019 Posted February 2, 2019 15 hours ago, fancydoctor said: Okay, so I'm having this issue where when I'm doing a falmer or chaurus animation, my pc is just standing while the falmer and bug are doing the animation. Anyone know what might be the problem here? I have the same problem long ago, but it was the creature that was not playing the animations. I think you might have not re-patch your FNIS after installing the animations provided here. Try doing that. Other than that, I don't think I can help you much.
Guest Posted February 2, 2019 Posted February 2, 2019 6 hours ago, timothy1022 said: someone can solve my problem ? i downloaded this mod and selected the pack that i want then i update the FNIS . there are only 2pack can be loaded... (i almost select all the pack) t thanks a lot.. Be sure to clear up some spaces by uninstalling any animations that you don't need. I think the problem might be the animation number that exceeds its limit. Sexlab itself can only hold 500 animations for both human and creature.
dragonoftheendtime Posted February 2, 2019 Posted February 2, 2019 hi ive installed this mod with vortex but when I try to load a save game or start a new game my game just ctd could anyone help me with this please
MadMansGun Posted February 2, 2019 Posted February 2, 2019 9 minutes ago, dragonoftheendtime said: hi ive installed this mod with vortex but when I try to load a save game or start a new game my game just ctd could anyone help me with this please whats your FNIS animation count?
C.thumb.jpg.7413cd59e8fc5ba3399d37172065851a.jpg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now