Charlie501 Posted August 2, 2018 Posted August 2, 2018 7 minutes ago, Psalam said: Reveal hidden contents So if I understand correctly you have spoken to Bellamy and he wants you to get a slave follower (okay, forget everything I said about Mundus he is not in the game yet). You have managed to get a vanilla follower at this point (Lydia, Jenassa, etc.). You should have a dialogue option of "what do you think about slavery." If that does not exist something has gone wrong with your SlaveRun game. Try it one more time and if it fails you will either have to advance the game via the console or start over. tried with jenasa, got the dialog, advanced to the point where I have to talk to bellamy and... same thing as before, niether I lost her or if I have doubts about being a slaver
Psalam Posted August 2, 2018 Posted August 2, 2018 Spoiler 19 minutes ago, Charlie501 said: tried with jenasa, got the dialog, advanced to the point where I have to talk to bellamy and... same thing as before, niether I lost her or if I have doubts about being a slaver First, is she physically there with you. I did this once with Carlotta Valentia and she stayed inside Whiterun while I went to talk to Bellamy. Make certain that you can also talk to her. Finally, make certain that she is in reasonable proximity to Bellamy. This last is a constant issue playing as a slaver. It is not unusual for the person to whom you are speaking to not "see" the slave. I have Carlotta in Markarth now. She just had sex with Moth and now he thinks I don't have a slave with me. (Of course I just took the advice I gave you and finished the quest). If all that is acting correctly, as I previously posted, you will have to decide if you want to start again or if you want to advance by console command. Doing the latter shouldn't cause the least bit of problem (especially since you could have skipped this whole scenario anyway).
Charlie501 Posted August 2, 2018 Posted August 2, 2018 8 minutes ago, Psalam said: Reveal hidden contents First, is she physically there with you. I did this once with Carlotta Valentia and she stayed inside Whiterun while I went to talk to Bellamy. Make certain that you can also talk to her. Finally, make certain that she is in reasonable proximity to Bellamy. This last is a constant issue playing as a slaver. It is not unusual for the person to whom you are speaking to not "see" the slave. I have Carlotta in Markarth now. She just had sex with Moth and now he thinks I don't have a slave with me. (Of course I just took the advice I gave you and finished the quest). If all that is acting correctly, as I previously posted, you will have to decide if you want to start again or if you want to advance by console command. Doing the latter shouldn't cause the least bit of problem (especially since you could have skipped this whole scenario anyway). ok I'll try to get her closer to bellamy, the odd thing is that she is there physically and I can also talk to her, but just in case, what's the full console command to skip this part?
Psalam Posted August 2, 2018 Posted August 2, 2018 Spoiler 2 minutes ago, Charlie501 said: ok I'll try to get her closer to bellamy, the odd thing is that she is there physically and I can also talk to her, but just in case, what's the full console command to skip this part? One part question. Multipart answer (is there any other kind with Skyrim)? Open the console ("~" key on an English keyboard)-to avoid confusion I will be using this format: type "sqt" means type the letters sqt (without quotation marks) 1) Type "sqt" and hit enter (bet you didn't see that coming)? 2) This returns a list of all active quest targets. Although you will likely not see them all they are there. To see more than what is currently showing hit the PageUp key. As you scroll through these you will find one that says "SLV_xxxxxx" where the xxxxxx is the number of the actual quest that Kenjoka has sent you on. If your memory is as bad as mine make a note of the entire thing. 3) Type "player.sqs SLV_xxxxxx" and hit enter. Of course put the numbers in for the x's. 4) This will return a list of things that say 10 1; 20 1; 30 1; 40 0; 50 0 or something similar in a column. The larger number on the left represents the stage of the quest. A 1 in the right column means that stage is complete and a 0 means it is not. Make a note of what stage has the first 0 (instead of 1). I will call this stage yy. 5) type "setstage SLV_xxxxxx yy" and hit enter. Even before you close the console you should receive the completed stage notification and then just follow the dialogue steps. If Bellamy genuinely can't see your slave you may have to repeat this step several times. Alternatively at step 3 you can type "completequest SLV_xxxxxx". Although this appears simpler I don't recommend it. Oftentimes the NPCs don't recognize that the quest is over even though your journal says it is. If you want to try it make a hard save before using it to go back to if it doesn't work as advertised. Good luck.
Ernest Lemmingway Posted August 2, 2018 Posted August 2, 2018 Well, after nearly six hours over several weeks of picking through more things than I care to count, I'm throwing in the towel on my attempts to proofread and enhance the dialogue. Not only is there so much I can barely see straight now, some of it I can't quite figure out what is meant. Then there are the empty journal entries which I can't do anything about. If I knew what stage of the training they were referring to, that would help immensely. But my game starts getting really unstable the longer I play. That may not be an issue with Slaverun itself but with another mod since it happens even without SR installed.
Psalam Posted August 2, 2018 Posted August 2, 2018 Spoiler 17 minutes ago, Ernest Lemmingway said: Well, after nearly six hours over several weeks of picking through more things than I care to count, I'm throwing in the towel on my attempts to proofread and enhance the dialogue. Not only is there so much I can barely see straight now, some of it I can't quite figure out what is meant. Then there are the empty journal entries which I can't do anything about. If I knew what stage of the training they were referring to, that would help immensely. But my game starts getting really unstable the longer I play. That may not be an issue with Slaverun itself but with another mod since it happens even without SR installed. Yeah I started over with the dialogue with the newest update. I'm probably about 10% of the way through. I haven't found anything I couldn't interpret yet (but 90% to go)! BTW, any luck with the cake?
Charlie501 Posted August 2, 2018 Posted August 2, 2018 1 hour ago, Psalam said: Reveal hidden contents One part question. Multipart answer (is there any other kind with Skyrim)? Open the console ("~" key on an English keyboard)-to avoid confusion I will be using this format: type "sqt" means type the letters sqt (without quotation marks) 1) Type "sqt" and hit enter (bet you didn't see that coming)? 2) This returns a list of all active quest targets. Although you will likely not see them all they are there. To see more than what is currently showing hit the PageUp key. As you scroll through these you will find one that says "SLV_xxxxxx" where the xxxxxx is the number of the actual quest that Kenjoka has sent you on. If your memory is as bad as mine make a note of the entire thing. 3) Type "player.sqs SLV_xxxxxx" and hit enter. Of course put the numbers in for the x's. 4) This will return a list of things that say 10 1; 20 1; 30 1; 40 0; 50 0 or something similar in a column. The larger number on the left represents the stage of the quest. A 1 in the right column means that stage is complete and a 0 means it is not. Make a note of what stage has the first 0 (instead of 1). I will call this stage yy. 5) type "setstage SLV_xxxxxx yy" and hit enter. Even before you close the console you should receive the completed stage notification and then just follow the dialogue steps. If Bellamy genuinely can't see your slave you may have to repeat this step several times. Alternatively at step 3 you can type "completequest SLV_xxxxxx". Although this appears simpler I don't recommend it. Oftentimes the NPCs don't recognize that the quest is over even though your journal says it is. If you want to try it make a hard save before using it to go back to if it doesn't work as advertised. Good luck. UPDATE: tried the command, the quest is SlaverTraining1, the stage that had the first 0 is numbered 2000, after doing the commands, the following objective is to show the follower that other women have accepted slavery, the thing is that the objective that I'm stuck at still doesn't appear as completed. Also in other news, the sex scenes still don't work (but this comes later)
Psalam Posted August 2, 2018 Posted August 2, 2018 Spoiler Just now, Charlie501 said: UPDATE: tried the command, the quest is SlaverTraining1, the stage that had the first 0 is numbered 2000, after doing the commands, the following objective is to show the follower that other women have accepted slavery, the thing is that the objective that I'm stuck at still doesn't appear as completed. Also in other news, the sex scenes still don't work (but this comes later) Don't worry about the numbers. If you can get Bellamy to play along you can go forward. If not advance the quest manually, stage by stage, until you can either make it work or it is completed. Stage by stage means turning the next one, apparently after 2000, on and see if you can speak with Bellamy. It is probably in your best interest to liberate this slave once you're done with this quest and are in Whiterun (err..Slaverun). Looking forward to news on the animations.
Charlie501 Posted August 2, 2018 Posted August 2, 2018 11 minutes ago, Psalam said: Reveal hidden contents Don't worry about the numbers. If you can get Bellamy to play along you can go forward. If not advance the quest manually, stage by stage, until you can either make it work or it is completed. Stage by stage means turning the next one, apparently after 2000, on and see if you can speak with Bellamy. It is probably in your best interest to liberate this slave once you're done with this quest and are in Whiterun (err..Slaverun). Looking forward to news on the animations. ok so I just keep on going until it works also I forgot to mention that this time around I did it with uthgerd and when I got out to speak to bellamy she changed her armor to regular clothes?
Psalam Posted August 2, 2018 Posted August 2, 2018 Spoiler 27 minutes ago, Charlie501 said: ok so I just keep on going until it works also I forgot to mention that this time around I did it with uthgerd and when I got out to speak to bellamy she changed her armor to regular clothes? I've had Uthgerd as a follower and she will do that sometimes (not in combat thankfully).
Ernest Lemmingway Posted August 2, 2018 Posted August 2, 2018 1 hour ago, Psalam said: Reveal hidden contents Yeah I started over with the dialogue with the newest update. I'm probably about 10% of the way through. I haven't found anything I couldn't interpret yet (but 90% to go)! BTW, any luck with the cake? More power to you if you can get through all the dialogue. And no, no luck. Not that I'm that worried about it. If necessary I'll use another mod that has a cake slice and Jaxonz Positioner to assemble something as a stand-in. 1
Kalenz Posted August 2, 2018 Posted August 2, 2018 Soo Just did a clean install and new game with this mod and installed everything etc etc (although devious devices is still buggy) When I first talk to Bellamy, regardless of what answers I give he fails to actually take my items. Is this supposed to be like that or is something not working properly?
Psalam Posted August 3, 2018 Posted August 3, 2018 Spoiler 10 hours ago, Kalenz said: Soo Just did a clean install and new game with this mod and installed everything etc etc (although devious devices is still buggy) When I first talk to Bellamy, regardless of what answers I give he fails to actually take my items. Is this supposed to be like that or is something not working properly? Something is not working properly. If you are enslaved or released as a free woman (not a potential slaver) your property should be confiscated.
Psalam Posted August 3, 2018 Posted August 3, 2018 @Kenjoka I know you have not fully implemented the slaver side of your mod. I did want to point out an issue you will likely want to address prior to releasing it. I just did the enslave Markarth quest. Pike agreed to give me 50.000 septims to take to Markarth. However, he never gave me a single pfennig. It wasn't a problem in my playthrough since I just went to Jarl Igmund and told him I had the money and he was entirely satisfied. So, when you fully implement the slaver side of this you may want to make a point of giving the slaver the money and making certain that they take it to Markarth.
Arcturus7777 Posted August 3, 2018 Posted August 3, 2018 I am running version, 2.13. talking to LOD as a female Futa slaver, he tells me to bring a test subject. I have two female followers with me and a third follower that was made a slave, but I can not get any dialog to get any further with LOD.
Psalam Posted August 3, 2018 Posted August 3, 2018 Spoiler 27 minutes ago, Arcturus7777 said: I am running version, 2.13. talking to LOD as a female Futa slaver, he tells me to bring a test subject. I have two female followers with me and a third follower that was made a slave, but I can not get any dialog to get any further with LOD. IIRC that is because you need to talk to Nenya (the steward) and use her as his test subject.
afa Posted August 4, 2018 Posted August 4, 2018 The item confiscation is a MCM setting I think. I usually leave it off just to speed things up when testing.
Qbeez999 Posted August 4, 2018 Posted August 4, 2018 Getting CTD when a chastity belt is put on me I enslaving Riverwood and at the part where Pike puts devices on me and I get CTD when chastity belt is equipped.
Psalam Posted August 4, 2018 Posted August 4, 2018 Spoiler 1 hour ago, Qbeez999 said: Getting CTD when a chastity belt is put on me I enslaving Riverwood and at the part where Pike puts devices on me and I get CTD when chastity belt is equipped. That's almost certainly NOT a problem from this mod but you can probably solve it with this one. Just go to the MCM and disable (under "devices") the use of the chastity belt. The problem is likely from whichever mod(s) are supplying the device (probably DD). This sort of thing has been reported before with the use of DD4.1.
asdfa93 Posted August 5, 2018 Posted August 5, 2018 After some of the whipping scenes my camera gets stuck, although a reload can solve this problem but the load option remains greyed out.
Psalam Posted August 5, 2018 Posted August 5, 2018 Spoiler 3 hours ago, asdfa93 said: After some of the whipping scenes my camera gets stuck, although a reload can solve this problem but the load option remains greyed out. First, make certain that the scene is actually over. Sometimes it looks like it's done but it's not. Second, if first isn't the issue, go to the problems page on the MCM menu and press "enable player controls" or something like that. It should give you your control back.
asdfa93 Posted August 5, 2018 Posted August 5, 2018 7 hours ago, Psalam said: Reveal hidden contents First, make certain that the scene is actually over. Sometimes it looks like it's done but it's not. Second, if first isn't the issue, go to the problems page on the MCM menu and press "enable player controls" or something like that. It should give you your control back. The scene was over (I assume), and already tried to reset player controls, but somehow a sex scene rape resolved this problem. Although I might be wrong about the end of the scene. Thanks for the suggestions ^^
Psalam Posted August 5, 2018 Posted August 5, 2018 Spoiler 37 minutes ago, asdfa93 said: The scene was over (I assume), and already tried to reset player controls, but somehow a sex scene rape resolved this problem. Although I might be wrong about the end of the scene. Thanks for the suggestions ^^ You're welcome.
rellay Posted August 5, 2018 Posted August 5, 2018 Hello everyone, i have some strange bugs with my game, just hope anyone can help to figure out what caused this. First bug, when i started Slaverun quest through Simple Slavery it wont started properly, i appeared in Yarl house in Whiterun, i have control on my character, but in original my character had to moving by scripted walk and start talking with slavers. I fixed this by starting quast through MCM-menu (Slaverun > Problems > enslave player), from third attempt. Second bug, after talking with slavers it automatically goes to Whiterun main gates, run through and start dialogue with Bellamy, a lot of dialog is happened, but then i must go to city but like a slave now. So here i stuck, it must go by script, but nothing happening, i can't make any move. Then a little bit of Google search and i finded command which enable character control, but now scripted scenes nearly main gates won't start anymore. I regret for my grammar mistakes, i'm not english fluent and i still need to learn a lot. Thanks.
Flutix Posted August 6, 2018 Posted August 6, 2018 Hi everyone, first of all i have to say that I love this mod. But I found out an annoying bug related to slaverun enforcer calls. In slaverun enslaved towns, i found out that i was constantly kicked to 3rd person even if i was in tfc mode. So after searching a bit for the cause i found out that it happened whenever enforcer checks are made. if I change the enforcer check timer in the mcm options, it changes the frequency at which the game kicks me to 3rd person and if I disable the enforcer checks completely it never happens. Is there a way to prevent this while keeping the enforcer checks on ? I don't recall having this problem before this version. Thanks.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now