Conglomerate

Crw0 · September 16, 2018

May be useful. ^_^

Spoiler

http://wiki.step-project.com/Main_Page

donttouchmethere · September 16, 2018

7 minutes ago, Crw said:

May be useful. ^_^

good idea =D

i could quote the STEP guide and look like a smartypants ???

donttouchmethere · September 16, 2018

weeee that spoiler thingy got messy rather quick

there must be some secret behind blogging ?

Psalam · September 16, 2018

You do spoilers here just like on other posts:

Spoiler

Otherwise you would have to spend your time saying, "scheiss" rather than getting your blog done.

donttouchmethere · September 16, 2018

7 minutes ago, Psalam said:

You do spoilers here just like on other posts:

yes, just forgot to have a line below the last spoiler => all spoilers below got pooled to one HUGE spoiler

i guess its best to type it in word before i transfer it to LL

that gives you the chance to look over it before ppl start to suffer ^^

Psalam · September 16, 2018

As always, my friend, whatever works for you.

worik · September 18, 2018

On 9/17/2018 at 12:07 AM, donttouchmethere said:

i guess its best to type it in word before i transfer it to LL

It should suffice to start EVERY SINGLE LL post with 2-3 blank new lines before you start typing anything else at all :classic_rolleyes:

donttouchmethere · September 18, 2018

4 hours ago, worik said:

It should suffice to start EVERY SINGLE LL post with 2-3 blank new lines before you start typing anything else at all

weeh your the right one to ask:

if i copy paste my test from open office or word everything seems to get messed up with blank lines.

1. i copy paste

2. i save the blog

3. LL adds blank lines everywhere

4. i edit the blog again to delete those lines

5. 2nd save of the blog will be right than

is that normal or do i have to use another program to write text without formats?

or is it enough -like you posted- to add 2-3 blank lines? (LL loves to add those anyways like it seems)?

would it be enough to use openoffice/words "blog" formats (i used it but didnt went well, maybe i did something wrong)?

worik · September 18, 2018

? we would better ask @CPU about the finer details of board editor magic.

But since useless linefeeds are added, I guess it's somewhere in the middle of your ctrl-c -> clipboard -> ctrl-v where you could try to get rid of your own linefeeds (if that's possible at all).

That's all on your end, that I could think of.

Psalam · September 18, 2018

Spoiler

32 minutes ago, donttouchmethere said:

weeh your the right one to ask:

if i copy paste my test from open office or word everything seems to get messed up with blank lines.

1. i copy paste

2. i save the blog

3. LL adds blank lines everywhere

4. i edit the blog again to delete those lines

5. 2nd save of the blog will be right than

is that normal or do i have to use another program to write text without formats?

or is it enough -like you posted- to add 2-3 blank lines? (LL loves to add those anyways like it seems)?

would it be enough to use openoffice/words "blog" formats (i used it but didnt went well, maybe i did something wrong)?

My experience with using Notepad is: 1) write what I want without placing things in lines, 2) add a symbol where I want a line break to occur (I like @ but any symbol would work), 3) copy the text and 4) remove the symbol and replace with a new line.

Thus: I think that Worik@ would make an ideal hostess@ since she is gracious, considerate and fun - would then be easily converted to:

I think that Worik

would make an ideal hostess

since she is gracious, considerate and fun

But that may be more work than you want.

worik · September 18, 2018

domo arigato :classic_blush: :classic_angel:

donttouchmethere · September 18, 2018

grrr, out of thumbs again, will be hard to type now

so notepad it is? back to the roots ^^

hmmm if i am on it already, would be interesting to see what happens if i copy paste from word to notepad

September 18, 2018

Hello. Just got a mention here.

I will read the full blog tomorrow. If anybody can tell me what the actual problem is I may give a solution earlier.

donttouchmethere · September 18, 2018

9 minutes ago, CPU said:

Hello. Just got a mention here.

I will read the full blog tomorrow. If anybody can tell me what the actual problem is I may give a solution earlier.

like a ghost out of the bottle =D

the problem is:

if i copy paste text i wrote in word/open office and copy paste it into my blog and save the blog=> LL will add blank lines between every sentence and additionaly some at the top of my created spoilers.

only after editing the blog again and delete those blank lines i get rid of them. No issue in short texts but i think in horror about what happens if i add longer texts with more added formats.

whats the best way to add text from word/excel/open office into my blog

or should i use a completly other program to prepare my texts?

and sure if you are here and want to check what i wrote from the technical aspect that would be great too

(btw no hurry, dont think i will give up on LL in the next few years xD)

September 18, 2018

You can use Ctrl+Shift+V to paste without formatting.

Of couse, you will lose the format, but you get rid of the empty lines.

Just be sure the original text does not contain empty lines at the end, because these will be pasted no matter what.

P.S. Genie in a lamp. And you still have 2 wishes to be fulfilled. But your soul is now mine.

September 18, 2018

Couple of comments on your blog @Psalam

1) No need to clean all the masters. You will only save half a second on load time. The game way to load files will do it automatically. (You save a null time.)

2) If you create or edit mods, better to use the 7zip version of SKSE. Installer one will just add a few registry keys that are useless. Just grab the archive, unpack, and copy ALL in Skyrim directory.

3) LOOT, only if you do not use MO (MO2 does not have it, MO 32 bits has it.)

4) Do not use both LOOT and Wryebash. They will conflict. Prefer Wryebash in case you need to merge mods.

5) On ENBBost config, save 10% o the max possible ram on videomemorysizemb. For some reasons if you have less than 2Gb of Vram goes faster. On 4Gb is about the same. On 8Gb and more makes no difference. Keep in mind that the max real used ram for Oldrim (with ENBBost) is 6.5Gb..

donttouchmethere · September 18, 2018

11 minutes ago, CPU said:

You can use Ctrl+Shift+V to paste without formatting.

Of couse, you will lose the format, but you get rid of the empty lines.

Just be sure the original text does not contain empty lines at the end, because these will be pasted no matter what.

P.S. Genie in a lamp. And you still have 2 wishes to be fulfilled. But your soul is now mine.

thx for the quick info!

wow, okey i gave up one wish for a copy paste issue *facepalm*

about that soul thing, i am on loverslab, you realy think there is still something to harvest ? *browses horse dicks for females*

Psalam · September 18, 2018

Spoiler

43 minutes ago, CPU said:

You can use Ctrl+Shift+V to paste without formatting.

Of couse, you will lose the format, but you get rid of the empty lines.

Just be sure the original text does not contain empty lines at the end, because these will be pasted no matter what.

P.S. Genie in a lamp. And you still have 2 wishes to be fulfilled. But your soul is now mine.

32 minutes ago, CPU said:

Couple of comments on your blog @Psalam

1) No need to clean all the masters. You will only save half a second on load time. The game way to load files will do it automatically. (You save a null time.)

2) If you create or edit mods, better to use the 7zip version of SKSE. Installer one will just add a few registry keys that are useless. Just grab the archive, unpack, and copy ALL in Skyrim directory.

3) LOOT, only if you do not use MO (MO2 does not have it, MO 32 bits has it.)

4) Do not use both LOOT and Wryebash. They will conflict. Prefer Wryebash in case you need to merge mods.

5) On ENBBost config, save 10% o the max possible ram on videomemorysizemb. For some reasons if you have less than 2Gb of Vram goes faster. On 4Gb is about the same. On 8Gb and more makes no difference. Keep in mind that the max real used ram for Oldrim (with ENBBost) is 6.5Gb..

Gee, I'm glad I didn't ask for anything for my birthday! ?

donttouchmethere · October 10, 2018

On 9/18/2018 at 11:10 PM, CPU said:

1) No need to clean all the masters. You will only save half a second on load time. The game way to load files will do it automatically. (You save a null time.)

didnt know cleaning master files had something to do with speed ?

do those issues not matter anymore?: Why clean the master files

donttouchmethere · October 10, 2018

On 9/18/2018 at 11:10 PM, CPU said:

4) Do not use both LOOT and Wryebash. They will conflict. Prefer Wryebash in case you need to merge mods

what exactly is the conflict?

LOOT => for sorting first time (if you dont know the mod positions anyways) and check if mods are dirty (iiik)

Wryebash => manually sort load order, delet esp, create bash patch (no usage of LOOT after creating bash patch, not using them at the same time)

for me LOOT isnt needed anymore, but it helped a lot as I started to add mods to skyrim the first year^^

the more LL mods got added the less useful was LOOT

worik · January 18, 2019

This part

[Display]
iTintTextureResolution=2048

might create problems on weaker machines.

They could go for 1024 or even back to vanilla 256

[Display]
iTintTextureResolution=1024
;iTintTextureResolution=256 // Vanilla

27X · January 18, 2019

On 9/18/2018 at 11:10 PM, CPU said:

Keep in mind that the max real used ram for Oldrim (with ENBBost) is 6.5Gb..

Spoiler

Edited August 25, 2021 by donttouchmethere

January 18, 2019

The OS is using some Ram and VRam memory too.

It is not used by Skyrim. The memory consumed is between 1 and 4 Gb depending on the OS and the settings.

TomTheCline · March 21, 2019

I'd like to point out that without AlignHeapAllocate=1 in CrashFixPlugin.ini the game will crash when you try using RaceMenu's UUNP morphs.

Grey Cloud · July 17, 2019

Just rebuilding Skyrim on my new machine.

Gopher says at the 2 minute mark to NOT clean Skyrim.esm. Apparently this way of doing it is now outdated with the latest versions of TESVEdit which has a 'quickautoclean' option

He also says that dirty edits are not a problem to Skyrim, only to modded Skyrim.

Sign In

128 Comments

Recommended Comments

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Guest

Link to comment

Link to comment

Guest

Link to comment

Guest

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Guest

Link to comment

Link to comment

Link to comment

Important Information