SexLab SE - Sex Animation Framework v1.66b - 01/18/2024

[WaxenFigure]

4 hours ago, JimKhan said:

I've been wondering, is there a reason why SexLab's Sex Journal remains remains empty? It's been like this since I started using it, I figured it was because I installed it mid playthrough but I'm not so sure of that anymore.

Read back a ways, can't remember the fix and don't have the time right now to hunt it but someone else had the same problem and it shouldn't be too far back in the thread and they did solve it.

[Pfiffy]

4 hours ago, JimKhan said:

I've been wondering, is there a reason why SexLab's Sex Journal remains remains empty? It's been like this since I started using it, I figured it was because I installed it mid playthrough but I'm not so sure of that anymore.

 

7 minutes ago, WaxenFigure said:

Read back a ways, can't remember the fix and don't have the time right now to hunt it but someone else had the same problem and it shouldn't be too far back in the thread and they did solve it.

How you trigger Scenes? If you are using FG, Sceens by FG will not be in the count. That was the problem there. 

[DoubleTrouble999]

6 hours ago, JimKhan said:

I've been wondering, is there a reason why SexLab's Sex Journal remains remains empty? It's been like this since I started using it, I figured it was because I installed it mid playthrough but I'm not so sure of that anymore.

I was able to fix Sex Diary by clicking on "Clean System" on the last MCM page

[JimKhan]

I'm only using 2 mods. Matchmaker and Spouses Enhanced SE. I did think of using the clean system but I'm not sure what it will change so I didn't want to take the chance. I remember this being talked about but when I tried to find it, I couldn't. But I suppose I'll use the clean system option. If nothing else works, I'll check back again.

[DoubleTrouble999]

13 minutes ago, JimKhan said:

I'm only using 2 mods. Matchmaker and Spouses Enhanced SE. I did think of using the clean system but I'm not sure what it will change so I didn't want to take the chance. I remember this being talked about but when I tried to find it, I couldn't.

I have highlighted it for you.

After clicking on it, sexlab would go through re-registration (animations, voices, expressions, etc.).

It would also reset settings to defaults, IIRC

You would have to wait for little bit, until its ready, but after that Sex Diary should be functional

 

 

[Vyxenne]

11 hours ago, JimKhan said:

I've been wondering, is there a reason why SexLab's Sex Journal remains remains empty? It's been like this since I started using it, I figured it was because I installed it mid playthrough but I'm not so sure of that anymore.

I installed SL mid-playthrough and my Sex Diary works fine:

[rushaz]

Apologies if this has been asked/covered already.  I was using SexLab light SE previously, and saw a few mods that asked for this one, so I tried to install this in Mod Organizer, disabled SE light, reran FNIS with no errors... but skyrim starts to load and then fails.

I built a new profile in MO and tried it in case something was borking it there, and same results exactly.  I only have the SexLab.esm mod set for loading, and it starts (initial black loading screen before the bethesda logo) then dumps back to the desktop.

Am I missing something?

[Kaarinah]

7 minutes ago, rushaz said:

Apologies if this has been asked/covered already.  I was using SexLab light SE previously, and saw a few mods that asked for this one, so I tried to install this in Mod Organizer, disabled SE light, reran FNIS with no errors... but skyrim starts to load and then fails.

I built a new profile in MO and tried it in case something was borking it there, and same results exactly.  I only have the SexLab.esm mod set for loading, and it starts (initial black loading screen before the bethesda logo) then dumps back to the desktop.

Am I missing something?

Did you install the hotfix?

[rushaz]

2 hours ago, Kaarinah said:

Did you install the hotfix?

I did not!  I missed that!  Found it, installed, working now!  Thank you very much for the help!

[Thenryb]

Here is an innocuous question-is there any way to make Lydia's bed in Breezehome off limits. It seems like most of the time whenever you choose a "nearby bed" you end up in that bed rather then the master bed. Lydia's bed is next to a slanted ceiling and the participant's head disappears into the roof. To be sure, there are places in Breezehome where you end up in the master bed.

[shebop]

Ok.  I have been having crashes with Sexlab on the beginning of animations on a consistent basis.  I finally have figured out that it has to do with extra, non-sex-act animations.  (At least so far... still running tests).  Both lip sync and expressions settings are causing CTD's.  When they are not activated, everything works fine.  When activated, they cause a CTD at some point during the animation; usually at the beginning. Is this a known issue? 

[fred200]

4 minutes ago, shebop said:

Ok.  I have been having crashes with Sexlab on the beginning of animations on a consistent basis.  I finally have figured out that it has to do with extra, non-sex-act animations.  (At least so far... still running tests).  Both lip sync and expressions settings are causing CTD's.  When they are not activated, everything works fine.  When activated, they cause a CTD at some point during the animation; usually at the beginning. Is this a known issue? 

Are all of your animations converted for SE? The symptoms you describe are consistent with an unconverted .hkx file.

[shebop]

9 hours ago, fred200 said:

Are all of your animations converted for SE? The symptoms you describe are consistent with an unconverted .hkx file.

I am not convinced you know what I am talking about.

1. These are not the symptoms of unconverted animations.  I have already experienced that.  The result is that the player body remains in the "T" shape and doesn't move.  In addition, FNIS has a cross check option I have been using ever since that experience to make sure this isn't the case anymore.
2. I have converted all the scripts  I was having trouble with already.
3. I didn't add animations of this type. I wasn't even aware that you can (if you can).  I am referriing to the check boxes in the Sexlab MCM "Animation Settings".  The "Apply Facial Expressions and ¶"Play Lip Sync Animations" options.  As far as I know, these are built in to SL.  

[elzee]

I can't find the camera shaking when orgasm option. Is there anything I've missed?

[Kaarinah]

18 minutes ago, elzee said:

I can't find the camera shaking when orgasm option. Is there anything I've missed?

It's in Animation Settings, Extra Effects, Play Ending Orgasm Effects.

[shebop]

1 hour ago, Kaarinah said:

It's in Animation Settings, Extra Effects, Play Ending Orgasm Effects.

I have had mixed results with this this so far in this version.  Either way the shaking doesn't occur.  It either doesn't play or on some occasions, it causes a CTD.  Again, the "extra" animations built in to Sexlab seem to be causing issues.  All "regular" (scene/pose) animations that I have seen are working so far.  It is only "effect" animations that cause problems.  Any reason why this would be?

 

EDIT: Does the shaking occur in free camera mode?  Perhaps this is why I don't see it occur. Though I thought it worked that way to in previous versions.  Perhaps I am mis-remembering.

[Vyxenne]

16 minutes ago, shebop said:

I have had mixed results with this this so far in this version.  Either way the shaking doesn't occur.  It either doesn't play or on some occasions, it causes a CTD.  Again, the "extra" animations built in to Sexlab seem to be causing issues.  All "regular" (scene/pose) animations that I have seen are working so far.  It is only "effect" animations that cause problems.  Any reason why this would be?

 

EDIT: Does the shaking occur in free camera mode?  Perhaps this is why I don't see it occur. Though I thought it worked that way to in previous versions.  Perhaps I am mis-remembering.

I'm getting the shaking, and yes it occurs in FreeCam mode. I'm still on Game 1.5.23 and SKSE64 2.0.6, though, so maybe if you're running the latest 'everything' something might have changed in the latest SexLab build.

[ZincTO]

How do I get the animations to start in game? Thank you in advance.

[Kain82]

2 hours ago, logiczinc said:

How do I get the animations to start in game? Thank you in advance.

You need to download a mod like 'SexLab Match Maker' or 'SexLab Romance.'  What you are downloading here is only the framework, you need other mods to access the animations.

[ZincTO]

1 hour ago, Kain82 said:

You need to download a mod like 'SexLab Match Maker' or 'SexLab Romance.'  What you are downloading here is only the framework, you need other mods to access the animations.

I found Matchmaker Light but cannot find the regular for SSE.

[tasairis]

47 minutes ago, logiczinc said:

I found Matchmaker Light but cannot find the regular for SSE.

They haven't been officially ported to SSE yet. You need to grab the original versions and convert them yourself. It's not hard: check Google and this thread.

[fishburger67]

1 hour ago, tasairis said:

They haven't been officially ported to SSE yet. You need to grab the original versions and convert them yourself. It's not hard: check Google and this thread.

Works without converting.

[GaymerBlue]

Does Sexlab Aroused not work with this? Whenever I enable sexlab aroused mod my game won't open. ( load order attached)

[shebop]

21 minutes ago, GaymerBlue said:

Does Sexlab Aroused not work with this? Whenever I enable sexlab aroused mod my game won't open. ( load order attached)

If by "won't open" you mean the game never comes up when launched (not even a window) then I have experienced this as well and have a probable solution.  If your game is launched and then closes before reaching 100 MB of memory (check details in the task manager), then it is likely due to the fact that an old plugin (esp/esm) you have "converted" (or not) are using has the old bsa format.  If this is the case, you must extract all the files from the bsa and then delete the bsa.  There might be a converter you can use as well but I am not aware of one,  You should also use the nif converter for SE for any meshes.  (It there are head parts being converted, these need to be converted separately using the head parts checkbox.  Otherwise you might get the SE black face bug). 

 

EDIT: hopefully you are using MO2 or something similar (such as Vortex).  This is because you cannot keep the extracted files separate from files in other mods without MO or Vortex.  Looks like you are using NMM... so you will have to mix them up I guess.

[GaymerBlue]

2 hours ago, shebop said:

If by "won't open" you mean the game never comes up when launched (not even a window) then I have experienced this as well and have a probable solution.  If your game is launched and then closes before reaching 100 MB of memory (check details in the task manager), then it is likely due to the fact that an old plugin (esp/esm) you have "converted" (or not) are using has the old bsa format.  If this is the case, you must extract all the files from the bsa and then delete the bsa.  There might be a converter you can use as well but I am not aware of one,  You should also use the nif converter for SE for any meshes.  (It there are head parts being converted, these need to be converted separately using the head parts checkbox.  Otherwise you might get the SE black face bug). 

 

EDIT: hopefully you are using MO2 or something similar (such as Vortex).  This is because you cannot keep the extracted files separate from files in other mods without MO or Vortex.  Looks like you are using NMM... so you will have to mix them up I guess.

Thanks, but I figured it out; I just uninstalled  and reinstalled with only the aroused sse loose version.