SexLab SE - Sex Animation Framework v1.66b - 01/18/2024

[Vyxenne]

8 hours ago, magoo5289 said:

I did see a couple questions on this but no answers unfortunately, does anyone know if the journal should work? Mine stays at 0 for count and unskilled no matter what i do, thanks!

Journal works for me too, and I can confirm what JackBiKwik said- it doesn't tally up any sex initiated via Flower Girls dialogs, but seems accurate for all SexLab events including Client Count for TDF.

 

[DoubleTrouble999]

43 minutes ago, Vyxenne said:

Journal works for me too, and I can confirm what JackBiKwik said- it doesn't tally up any sex initiated via Flower Girls dialogs, but seems accurate for all SexLab events including Client Count for TDF.

  Reveal hidden contents

OK. What do I need to do to make it work?

This is the way it shows up to me:

 

Spoiler

 

[Sirlight]

6 hours ago, DoubleTrouble999 said:

Have you installed animation packs?

Have you clicked on Reload JSON Data after installing Animation packs?

Are Animation packs listed on the left side of MCM menu, below "General Options" of SLAL?

Have you ran FNIS after installing Animation packs?

 

 

WTF i don't have all that, just have the general tab and yes to all your answers... I don't have that list of animations and i have several packs.

[Kaarinah]

13 minutes ago, mavvo said:

 

WTF i don't have all that, just have the general tab and yes to all your answers... I don't have that list of animations and i have several packs.

If you use Wrye Bash you need to tick has extra directories for the json files to be installed. Check so you have the json files in the json folder under SLAnims either way.

[Sirlight]

2 hours ago, Kaarinah said:

If you use Wrye Bash you need to tick has extra directories for the json files to be installed. Check so you have the json files in the json folder under SLAnims either way.

 

What is Wrye Bash? I never heard I had to use it andi don't think i have it...

What I did was: install the framework and dependences, install the mods with animations, run FNIS everytime i installed, ent into game, installed Sexlab and that's itas i said the sl animation ladel in MCM is like your it has only general and no Anubs creature etc, even if i am 100% sur ei have them cause FIN when I run it says i have 'em. also when doing the 1on1 animation it says the name of animation like Leito, Arrok etc but I some way miss the FMMM and FMM animations. for this second one i have a couple but should have more i guess. the FMMM only start the 4way gay

[Guest]

7 hours ago, mavvo said:

 

What is Wrye Bash? I never heard I had to use it andi don't think i have it...

What I did was: install the framework and dependences, install the mods with animations, run FNIS everytime i installed, ent into game, installed Sexlab and that's itas i said the sl animation ladel in MCM is like your it has only general and no Anubs creature etc, even if i am 100% sur ei have them cause FIN when I run it says i have 'em. also when doing the 1on1 animation it says the name of animation like Leito, Arrok etc but I some way miss the FMMM and FMM animations. for this second one i have a couple but should have more i guess. the FMMM only start the 4way gay

Out of curiousity, after you installed the mods, and BEFORE you ran FNIS, did you compile the anims? In other words, the "SLAnimGenerateForMNCv11.py" (or whatever python script you see in "...steam\steamapps\common\Skyrim\Data\SLAnims") - did you load it into a python shell and run (by hitting F5) that script? You need to do that when you first install an SLAL pack. Then, AFTER you run that script which compiles the anims, then you can run FNIS. They should show up after that.

 

If this is Greek, let me know. I was confused at first too...

[DoubleTrouble999]

8 hours ago, mavvo said:

 

What is Wrye Bash? I never heard I had to use it andi don't think i have it...

What I did was: install the framework and dependences, install the mods with animations, run FNIS everytime i installed, ent into game, installed Sexlab and that's itas i said the sl animation ladel in MCM is like your it has only general and no Anubs creature etc, even if i am 100% sur ei have them cause FIN when I run it says i have 'em. also when doing the 1on1 animation it says the name of animation like Leito, Arrok etc but I some way miss the FMMM and FMM animations. for this second one i have a couple but should have more i guess. the FMMM only start the 4way gay

Have you installed JContainers? Is it of correct version?

It is the requirement for SLAL.

[DoubleTrouble999]

23 minutes ago, TR0767 said:

Out of curiousity, after you installed the mods, and BEFORE you ran FNIS, did you compile the anims? In other words, the "SLAnimGenerateForMNCv11.py" (or whatever python script you see in "...steam\steamapps\common\Skyrim\Data\SLAnims") - did you load it into a python shell and run (by hitting F5) that script? You need to do that when you first install an SLAL pack. Then, AFTER you run that script which compiles the anims, then you can run FNIS. They should show up after that.

 

If this is Greek, let me know. I was confused at first too...

You don't need to compile animations if they come in the pack for SLAL

[Sirlight]

11 minutes ago, DoubleTrouble999 said:

Have you installed JContainers? Is it of correct version?

It is the requirement for SLAL.

 

Yes I have........................... i am so confused now maybe i should ninstall everything and just forget about seems to me too complicated for a game and i don't know where to start from for not making mess.

If I have to make a fresh install of sexlabs and anim thing what do i do? and the procedure to make it work?

[Guest]

16 minutes ago, DoubleTrouble999 said:

You don't need to compile animations if they come in the pack for SLAL

Maybe it was just my setup then. Sometimes they wouldn't register, so I just started compiling by default (unless I'm updating a pack). I think it's a good step to try at the very least.

[WaxenFigure]

2 hours ago, TR0767 said:

Out of curiousity, after you installed the mods, and BEFORE you ran FNIS, did you compile the anims? In other words, the "SLAnimGenerateForMNCv11.py" (or whatever python script you see in "...steam\steamapps\common\Skyrim\Data\SLAnims") - did you load it into a python shell and run (by hitting F5) that script? You need to do that when you first install an SLAL pack. Then, AFTER you run that script which compiles the anims, then you can run FNIS. They should show up after that.

 

If this is Greek, let me know. I was confused at first too...

WTF?

 

NO!  YOU DO NOT NEED TO COMPILE THOSE SLAL PACKS!

 

 

That is flat out wrong. 

 

You just need to run the FNIS User Generator program.  If you are using Mod Organizer then you must run it using MO.

 

Do NOT follow that advice, it is NOT a good thing to do and it may even break things because some authors tweak the generated results by hand AFTER they create their pack and running that script will remove those tweaks.

 

Repeating: DO NOT DO THIS!  I cannot emphasize it enough.

 

 

[Guest]

3 hours ago, WaxenFigure said:

WTF?

 

NO!  YOU DO NOT NEED TO COMPILE THOSE SLAL PACKS!

 

 

That is flat out wrong. 

 

You just need to run the FNIS User Generator program.  If you are using Mod Organizer then you must run it using MO.

 

Do NOT follow that advice, it is NOT a good thing to do and it may even break things because some authors tweak the generated results by hand AFTER they create their pack and running that script will remove those tweaks.

 

Repeating: DO NOT DO THIS!  I cannot emphasize it enough.

 

 

Good to know - I've never had anything bad happen, maybe I'm just lucky. I'll refrain from giving advice on this in the future....

[Vyxenne]

18 hours ago, DoubleTrouble999 said:

OK. What do I need to do to make it work?

This is the way it shows up to me:

 

  Reveal hidden contents

 

So sorry, but I have no idea- I followed installation insructions to the letter (using NMM) and it just worked.

[Kaarinah]

On 2018-05-18 at 3:59 PM, mavvo said:

I am having a problem I can't happen a a FMMM action in any way... i am pretty sure I have the animations.. in case someone can link me a pack with FMMM animations? =\

Al I get is a zen gay 4way is i use bed otherwise no animation... i don't know what do i tried uninstall the packs i had running FNIS everytime i only left the Anim loader, the framework here and the rest but NO packs. it still says i only have 93 animations everytime.

 

I am terribly confused right now, how can this be? If someone is willing to explain me better how this works :\ maybe i don't have somethign installed... do i have to do somethign particular in game after using FNIS? i tried go on MCM animations sections to register but he said no new animations. For some reason I think that with sexlab light I had MANY more animations....

Did you uninstall the SLAL packs or is that a typo? If you unintalled them without reinstalling them they of course don't show up in MCM.

[Sirlight]

27 minutes ago, Kaarinah said:

Did you uninstall the SLAL packs or is that a typo? If you unintalled them without reinstalling them they of course don't show up in MCM.

OK I found out what was my problem, i had EVRYTHING good but wrong version of JCONTAINERS. I went in their site and downloaded the latest version for SE and now everytime I install a SLAL pack i have it in animation loader to register! all i have to do is to go in that section and do enable all and register right? i don't have to reload and reapply JSON or register from general section? ALSO i have 2 PACKS wich i do not understand if they work together called: SLAL_Billly_Human v1.2, SLAL_Billly_furniture v1.1 WICH i downloaded together but also I downlaoded the  Biilly's_SLAL_animations 1.01 not sure wich ones install or if i can use both?

 

Also I downloaded the Anub Human but it doesn't have the SLAL tag so not sure what do...

[DoubleTrouble999]

28 minutes ago, mavvo said:

OK I found out what was my problem, i had EVRYTHING good but wrong version of JCONTAINERS. I went in their site and downloaded the latest version for SE and now everytime I install a SLAL pack i have it in animation loader to register! all i have to do is to go in that section and do enable all and register right? i don't have to reload and reapply JSON or register from general section? ALSO i have 2 PACKS wich i do not understand if they work together called: SLAL_Billly_Human v1.2, SLAL_Billly_furniture v1.1 WICH i downloaded together but also I downlaoded the  Biilly's_SLAL_animations 1.01 not sure wich ones install or if i can use both?

 

Also I downloaded the Anub Human but it doesn't have the SLAL tag so not sure what do...

I'm reloading JSON Data just in case, after installing new pack or updating old pack.

After that I do "Enable All" and "Register Animations"

 

If you downloaded Biilly's_SLAL_animations 1.01, then you don't need any other Biilly's animation packs, because it contains all of them, and you can chose what to install in FOMOD.

 

Anub Human is SLAL pack even if it doesn't have SLAL tag

[Sirlight]

37 minutes ago, DoubleTrouble999 said:

I'm reloading JSON Data just in case, after installing new pack or updating old pack.

After that I do "Enable All" and "Register Animations"

 

If you downloaded Biilly's_SLAL_animations 1.01, then you don't need any other Biilly's animation packs, because it contains all of them, and you can chose what to install in FOMOD.

 

Anub Human is SLAL pack even if it doesn't have SLAL tag

 

But it never played any Anub for me untill i installed it now i isntalled and worked. so i reload JSON and reapply? then enable all and register. still i do not use creatures packs. should i do RELOAD AND REAPPLY or reload, enable all, register and reapply?

[DoubleTrouble999]

24 minutes ago, mavvo said:

 

But it never played any Anub for me untill i installed it now i isntalled and worked. so i reload JSON and reapply? then enable all and register. still i do not use creatures packs. should i do RELOAD AND REAPPLY or reload, enable all, register and reapply?

If you already registered them, you don't need to reload again.

 

I never tried to use reapply, so don't know about that one

[Sirlight]

1 hour ago, DoubleTrouble999 said:

If you already registered them, you don't need to reload again.

 

I never tried to use reapply, so don't know about that one

 

BTW now seems to work everything! i only miss some animation ihad on SL Lite,  it was  a pack contaning a FMMM kneel BJ if I remember well but can't find it also some non consensual sex :\ do you have idea what can it be?

[Kaarinah]

1 hour ago, mavvo said:

 

BTW now seems to work everything! i only miss some animation ihad on SL Lite,  it was  a pack contaning a FMMM kneel BJ if I remember well but can't find it also some non consensual sex :\ do you have idea what can it be?

There are many more sLAL packs in the Oldrim section, so far all I've tried has worked fine as long as you convert the animations. https://www.nexusmods.com/skyrimspecialedition/mods/2970 is a guide for that, with a helpful bat-file too.

[Sirlight]

Thanks man! One more thing, one an animation with furniture starts and i want change animation, the furniture remains in the middle of animation... is there a way to remove it? =\

[Sirlight]

2 hours ago, Kaarinah said:

There are many more sLAL packs in the Oldrim section, so far all I've tried has worked fine as long as you convert the animations. https://www.nexusmods.com/skyrimspecialedition/mods/2970 is a guide for that, with a helpful bat-file too.

 

Does ZaZ animations for SE and this version works? i can't find them anywhere the SLAZaZ i mean

[Kaarinah]

1 hour ago, mavvo said:

 

Does ZaZ animations for SE and this version works? i can't find them anywhere the SLAZaZ i mean

https://www.loverslab.com/topic/93745-zaz-animation-pack-80-plus-for-skyrim-se/ is a port done, I ported 7 and it seems to be fine, I know several others have ported various ZAZ for themself too.

[Sirlight]

7 minutes ago, Kaarinah said:

https://www.loverslab.com/topic/93745-zaz-animation-pack-80-plus-for-skyrim-se/ is a port done, I ported 7 and it seems to be fine, I know several others have ported various ZAZ for themself too.

 thanks I saw on zaz animation v 7.0 that he got tears on slaves O_O is there really a mod adding tears for pain at people or what?

[Pfiffy]

8 minutes ago, Kaarinah said:

https://www.loverslab.com/topic/93745-zaz-animation-pack-80-plus-for-skyrim-se/ is a port done, I ported 7 and it seems to be fine, I know several others have ported various ZAZ for themself too.

yes... There are so many private ports now, that noone will make a download from an official release....