Heretical Resources (11-03-2017)

[Hæretic]

no luck so far Haeretic every combination of itiems i equip always wind up unloadable. can only think its something with hdt then. as when u loading a area is noormaly the time hdt likes to go nuts.

Have you tried only the chain attachments for the pear? Also, how about HDT items from other mods? If HDT is causing this they should give the same result.

 

Edit: Have you tried to load a clean save and load your savegame after that save was loaded?.

[sidfu]

well first test was the body chains and the bell. it failed to load. next was nothing but the chan harneses so should have been like clothes and it did same. after i take a break( been tryiing to fix it for 8 hours) ill try some more.

 

i have np with any other hdt stuff.

[Hæretic]

well first test was the body chains and the bell. it failed to load. next was nothing but the chan harneses so should have been like clothes and it did same. after i take a break( been tryiing to fix it for 8 hours) ill try some more.

 

i have np with any other hdt stuff.

 

Wait, so every time you had problems with loading a save you had the chain harness equipped and you still had the problems with only the chain harness? First of all that isn't an HDT item there is nothing moving there. And second that is by far the item with the highest poly count so this might be a hardware issue after all. When I made the chain harness I was bit inexperienced and made the chains more detailed than they needed to be thus the high poly count...

[sidfu]

hmm its possible that my 4.2gh cpu and  8gb 1080 gtx FE would have issues with the high polys. but instead of hardware its probaly software. the high poly chains might be ccauseing ram to spike right when game loads and thats why i get a black screen with sound. ill try it with some of the other stuff in a bit.

 

 

ok looks like i might be the high polygons causeing momentary ram spike causeing the blackscreen with sound. just did a test with a vag and anal chain and it loaded fine. guess for now ima have to avoid useing the chains till u make a lower poly one then.

 

this sounds just like the issue thats with current version of rimworld. on it when loading larger maps ram can momentary spike cuaseing a  OOM crash even thou it has enough ram room

[Hæretic]

hmm its possible that my 4.2gh cpu and  8gb 1080 gtx FE would have issues with the high polys. but instead of hardware its probaly software. the high poly chains might be ccauseing ram to spike right when game loads and thats why i get a black screen with sound. ill try it with some of the other stuff in a bit.

Okay, it's definitely not your hardware ^^ 

But it still might be the engine yes, I would like to know if you are the only one experiencing this. I tried loading the game with the chain harness equipped and it did work.

[sidfu]

well the issue is probaly random. for example i just tested it and long as the person with the chains on isnt in my view say they in breeze home and im outside it load fine.

 

i had already tried before to see if was ram by disableing all my  texxutes and was same.

 

hmm wonder if the zazextentionpack might contribiting to ti?

 

well the black screen with sound can be caused by aloot of things. u ccan google it and see alot of people have had it and there no 1 specific  thing that causes it.

 

ima play a bit with just the bell and sign on and see how everything holds up.

 

just so u know the tri files for the chains are a whoping 24mb  for biggest which is 4 times larger than the acutaly nif

[SexDwarf2250]

Just wanted to say thanks for the decorations. Finally have a good place to put dead slaves. (PaHE) For anyone wondering, you can use Jaxonz to move the chain, if you use TCL the subject won't snap into place at the chain until you turn noclip back off, and lastly, once they are in place, you can use console kill command to free a slave slot. Edit: They seem to fall off of the chain after a day or two if you do this.

 

 

 

 

If I could have a request, I would just ask that corpses can be directly hooked up to chains as well.

 

P.S. You can get them where they don't hang still, but very slowly rotate, which looks great. If they don't move, try kicking them. This won't work after they're dead.

[Funnybizness]

I created these animations just bc of this amazing mod. So many toys to play with! Thank you for bringing so much happiness to my Skyrim.

[Jappa123]

Hello, i usually set Glossiness to 1000 and Specular Strenght to 10 in NifSkope and my body looks oil/wet but for no reason its not working with bb items any idea why ? Thx for help !

[Hæretic]

well the issue is probaly random. for example i just tested it and long as the person with the chains on isnt in my view say they in breeze home and im outside it load fine.

 

i had already tried before to see if was ram by disableing all my  texxutes and was same.

 

hmm wonder if the zazextentionpack might contribiting to ti?

 

well the black screen with sound can be caused by aloot of things. u ccan google it and see alot of people have had it and there no 1 specific  thing that causes it.

 

ima play a bit with just the bell and sign on and see how everything holds up.

 

just so u know the tri files for the chains are a whoping 24mb  for biggest which is 4 times larger than the acutaly nif

Yeah I know this is normal, tri files are always larger than the nif because they include multiple morphed variations of the meshes, no surprise there. And yes the Harness which has a lot of polys creates a large tri file. Like I said this was a mistake I made while creating the harness, and I couldn't reduce the poly amount once it was done...

 

Just wanted to say thanks for the decorations. Finally have a good place to put dead slaves. (PaHE) For anyone wondering, you can use Jaxonz to move the chain, if you use TCL the subject won't snap into place at the chain until you turn noclip back off, and lastly, once they are in place, you can use console kill command to free a slave slot.

 

 

If I could have a request, I would just ask that corpses can be directly hooked up to chains as well.

 

P.S. You can get them where they don't hang still, but very slowly rotate, which looks great. If they don't move, try kicking them. This won't work after they're dead.

I just made an example script for the Havok worldobjects I created. The actual mechanics are in Musje's mod, you have to ask him about that.

 

I created these animations just bc of this amazing mod. So many toys to play with! Thank you for bringing so much happiness to my Skyrim.post-51187-0-70929700-1492317261.gifpost-51187-0-63652300-1492317317.gif

Thanks, I am always happy when I see other modders getting creative with HR assets 

 

 

Hello, i usually set Glossiness to 1000 and Specular Strenght to 10 in NifSkope and my body looks oil/wet but for no reason its not working with bb items any idea why ? Thx for help !

Yes, the BB Items replace your body so the settings of the replacements are used. You can open the bodyslide files of HR, find the BB item nifs in the "ShapeData" folder and change the settings there. After that you just have to generate the items with Bodyslide again and you have an oily body 

[sidfu]

haeretic can u make a list of the ones that are high poly like that?

[caocaothedeciever]

Just a quick question, been enjoying heretical resources with SD+, but I wanted to check- when they kneel, are their breasts supposed to look distorted? I'm assuming there just hasn't been an animation for kneeling yet, or is there a mistake on my end?

[Funnybizness]

Oh my goodness. This mod is sooo immersive. Like the chains clanking as my hostage walks is beyond amazing. You really are a brilliant creator my friend. I was finally able to capture a Storm Cloak General in game. First time ever and thanks to your mod she won't be running away.

 

 

 

[caocaothedeciever]

Oh my goodness. This mod is sooo immersive. Like the chains clanking as my hostage walks is beyond amazing. You really are a brilliant creator my friend. I was finally able to capture a Storm Cloak General in game. First time ever and thanks to your mod she won't be running away.

 

20170418002825_1.jpg20170418002936_1.jpg

 

 

Curious- what mod did you use to capture her? Sexlab Defeat? .

 

Also, how did you get the equipment to add to her? Did you unlock it via the console?

[Funnybizness]

 

Oh my goodness. This mod is sooo immersive. Like the chains clanking as my hostage walks is beyond amazing. You really are a brilliant creator my friend. I was finally able to capture a Storm Cloak General in game. First time ever and thanks to your mod she won't be running away.

 

20170418002825_1.jpg20170418002936_1.jpg

 

Curious- what mod did you use to capture her? Sexlab Defeat? .

 

Also, how did you get the equipment to add to her? Did you unlock it via the console?

Caocao I had them in my inventory using the additemmenu mod and during a battle (immersive patrols) I ran up while she was injured and tied her up using sexlab defeat. THEN I used Display model mod to tell her to come with me and to put the chains on. Now she is ready to be sold AND can be posed.

[Asrienda]

Thanks, by the way.

 

 

 

 

 

[Guest]

 

hmm its possible that my 4.2gh cpu and  8gb 1080 gtx FE would have issues with the high polys. but instead of hardware its probaly software. the high poly chains might be ccauseing ram to spike right when game loads and thats why i get a black screen with sound. ill try it with some of the other stuff in a bit.

Okay, it's definitely not your hardware ^^ 

But it still might be the engine yes, I would like to know if you are the only one experiencing this. I tried loading the game with the chain harness equipped and it did work.

 

 

I have a GTX 970 and a similar hardware as Sidfu and I am also experiencing problems with the Harness and all the things that equip to the player like shoes, gloves, chest armor... The only time I have ever experienced such a bug was when the equipment had a different Slot designated in CK compared to the Slot designated in Nifscope.

 

However I have no problems with items that have Misc. Slots (appear as a shield icon in the inventory), so any mouth gags, manacles, collars and etc... work fine.

[Vincenza]

@Grine : 

 

The problem is not this mod and also not your hardware. The problem may be due to your hdtPhysicsExtensionsDefaultBBP.xml. Try to use a different one. I had the same problem some time ago. After exchanging this file everything ran smoothly. Try it, a try is worth it.

[Guest]

@Grine : 

 

The problem is not this mod and also not your hardware. The problem may be due to your hdtPhysicsExtensionsDefaultBBP.xml. Try to use a different one. I had the same problem some time ago. After exchanging this file everything ran smoothly. Try it, a try is worth it.

 

Could you refer to some options as to where to get one? I just download a skeleton mod and the HDT framework.

Dont know anything else.

[Vincenza]

Use uunp or cbbe?

[Guest]

Use uunp or cbbe?

 

Well I use this mod and I install the UUNP Special.

Are you saying I should select another bodytype when installing that mod? 

 

Sorry your answer was somewhat vague and I dont understand what you are trying to say.

[Vincenza]

You should not use any other bodytype. Uunp is completely ok. I just wanted to say what it could be. Test the file I upload. Please make a backup of your file. Just in case it does not work. 

 

hdtPhysicsExtensionsDefaultBBP.7z

 

What I wanted to say is that a faulty xml file could be to blame. As I said I had the same problems some time ago. Frame Breaks, CtD's, Blackscreens.

[Guest]

You should not use any other bodytype. Uunp is completely ok. I just wanted to say what it could be. Test the file I upload. Please make a backup of your file. Just in case it does not work. 

 

hdtPhysicsExtensionsDefaultBBP.7z

 

What I wanted to say is that a faulty xml file could be to blame. As I said I had the same problems some time ago. Frame Breaks, CtD's, Blackscreens.

 

Still the same issue as before!

Any ideas on what else it could be?

[Vincenza]

With me it brought the solution. Ok, that does not have to mean that it works with all. Sorry

[Guest]

Maybe my problem is not HDT because some other HDT stuff works just fine.

Maybe its has something to do with the high poly of the harness and other items. Is there an option in the ini that would allow my game to see items with much higher poly count?