LutherX Posted April 4, 2017 Posted April 4, 2017 Every single time I get defeated and after the scene, I am just stuck on the ground. It won't let me get up at all. The struggle bar never appears after the scene. Â I was going to try going back to version 5.3.0, but only the latest version is kept in the downloads section........ Â Any help would be appreciated, even if you just give me a link to version 5.3.0 Â This is the problem I am having. The character just lays there, whimpering. The only way to get out of it is to 'reset character state' via the Death Alternative config. --- Â Downgrading to 5.3.4 seemed to fix it, at least now Death Alt can take over after the rape.
Rasulis Posted April 4, 2017 Posted April 4, 2017 Can someone assist me. I am so close to getting my maxed out mod setup running, but this mod is being the last pain in my ass. I have a weird glitch where it stalls the activation of animations, but if I open the console or open a uiextension menu, the animation plays normally. In the console or the info starts getting pumped out. But if I don't, I just stand there indefinitly. Fnis has no erros, all the animations are registered. It seems like something is snagging up the activation code, maybe to do with the UI extension. Â I also have the 4.6 SLA pack for fuzzy animations. Should I move over to the direct install instead? Â Can you have UIExtension and SexLab tools installed? Could these be causing hanging in anyway?
mmrf Posted April 5, 2017 Posted April 5, 2017 Can you please make it so that in case of a robbing event quest items will not be stolen? I got a lot of broken quests after being defeated multiple times before retrieving the items.
boo Posted April 5, 2017 Posted April 5, 2017  Is there a way for a scene to include 4somes or 5somes? Have the appropriate animations installed and registered. the only ones i've seen are some by FunyBiz, but i tend to use his stuff with caution as there are Necro and Guro anims lumped in there as well.  Have animations installed and registered, but I always get soloed when defeated.
Airianna Posted April 5, 2017 Posted April 5, 2017   Is there a way for a scene to include 4somes or 5somes? Have the appropriate animations installed and registered. the only ones i've seen are some by FunyBiz, but i tend to use his stuff with caution as there are Necro and Guro anims lumped in there as well.  Have animations installed and registered, but I always get soloed when defeated.   You have to increase the chance for multiples (3 somes) as victim. And be sure there is more than 1 aggressor. I personally don't mind them 1 at a time at all. Sometimes, it's rather enjoyable.
boo Posted April 6, 2017 Posted April 6, 2017    Is there a way for a scene to include 4somes or 5somes? Have the appropriate animations installed and registered. the only ones i've seen are some by FunyBiz, but i tend to use his stuff with caution as there are Necro and Guro anims lumped in there as well.  Have animations installed and registered, but I always get soloed when defeated.   You have to increase the chance for multiples (3 somes) as victim. And be sure there is more than 1 aggressor. I personally don't mind them 1 at a time at all. Sometimes, it's rather enjoyable.  I have the percentage rather high.
Gorebain Posted April 6, 2017 Posted April 6, 2017 Can anyone help me out with a problem I'm having regarding defeat Every time I try to edit the tags to ignore or specify with animations used by defeat I get a CTD
Airianna Posted April 6, 2017 Posted April 6, 2017 Can anyone help me out with a problem I'm having regarding defeat Every time I try to edit the tags to ignore or specify with animations used by defeat I get a CTD Â On starting a new game, this is always a problem, I got to where I just ignored that aspect. But others say, after you do your character set-up, and save the game, next load, should be fine.
Airianna Posted April 6, 2017 Posted April 6, 2017     Is there a way for a scene to include 4somes or 5somes? Have the appropriate animations installed and registered. the only ones i've seen are some by FunyBiz, but i tend to use his stuff with caution as there are Necro and Guro anims lumped in there as well.  Have animations installed and registered, but I always get soloed when defeated.   You have to increase the chance for multiples (3 somes) as victim. And be sure there is more than 1 aggressor. I personally don't mind them 1 at a time at all. Sometimes, it's rather enjoyable.  I have the percentage rather high.  Under Player As Victim, 3 some chance, I left that at 30% myself. Not sure if Creature multiples has the same meaning, but I don't think it does. Also, you have to go through your Sexlab registered animations, and make sure they are enabled to be chosen. *might of unchecked them by accident, I've done it before. Had to re-register all animations, then carefully remove the ones that have never looked physically possible.*
kevintheradioguy Posted April 7, 2017 Posted April 7, 2017 So, um, this is an odd one, but... is there a console command to use for certain values? I've accidentally sold the burlap sack and now have no possibility to use this action again, since the last one is not in my inventory, and the shop inventory was reset. I really would like not to loose the small harem I've made with this mod as a result o deinstallation and reinstallation, so can some consoles be used to clean the value needed?
jfraser Posted April 7, 2017 Posted April 7, 2017 So, um, this is an odd one, but... is there a console command to use for certain values? I've accidentally sold the burlap sack and now have no possibility to use this action again, since the last one is not in my inventory, and the shop inventory was reset. I really would like not to loose the small harem I've made with this mod as a result o deinstallation and reinstallation, so can some consoles be used to clean the value needed?type help sack (or some other distinguishing word to find the code for the sack) then type in player.additem and the code for it
Green Tryst Posted April 7, 2017 Posted April 7, 2017 Â Seem to be having an issue with followers being assaulted. Â They get knocked down, but once final follower or PC is knocked down, PC only is targeted, followers just congregate around PC and watch/sandbox. Â I suspect this is an MCM setting issue between Defeat and DA, maybe followers not being handed off properly between mods? Â I use ATF, I only use 3 followers, I believe I have the Defeat settings correct (they have worked in previous iterations). Â I think that's currently a bug or a side effect of one. Â I get that with just a follower and me. The only way I can get a creature to assault a follower is for the follower to be defeated (need proper MCM settings also, like not both down), and for me to be in stealth (not selectable). Â And even then I can see the message 'Follower sees Follower' (follower selected herself) at times and of course the animation doesn't play as can't have sex with yourself heh. Â Other times no selection and no animation. Â Something up with the assaulter selection code picking the incorrect victim. Â Â I don't think it's Lydia-on-Lydia bug...it seems like the followers aren't getting picked up by Defeat.
Gorebain Posted April 7, 2017 Posted April 7, 2017 Â Can anyone help me out with a problem I'm having regarding defeat Every time I try to edit the tags to ignore or specify with animations used by defeat I get a CTD On starting a new game, this is always a problem, I got to where I just ignored that aspect. But others say, after you do your character set-up, and save the game, next load, should be fine. Cheers bud will give it a shot, much love
thexelx Posted April 8, 2017 Posted April 8, 2017 Does Untamed mess with defeat? Cause my wolves or any animal in my pack rape human males *only want females as victims of creatures*.  I then turned off enable creatures to sexually assault a defeated NPC and my pack creatures still rape any defeated enemy or ally no matter the gender.  also, I see that once they start doing the animations the wolf changes into a smaller size model only with males.  my load https://pastebin.com/hFKXdtAk  I'm going to test just disabling creatures in Sexlab and see if it still does it.  Edit: nope they don't do it after I disable creatures in the sexlab menu, well at least I found a workaround....is there a way to disable male race's for creatures?
AnubiSs2167 Posted April 8, 2017 Posted April 8, 2017 Found a bug that if you try to surrender to rekling mounted raider it starts human on human dialog. Rekling always lets you go and imidietly atacks after the dialog has ended.
grasshopper100 Posted April 8, 2017 Posted April 8, 2017 The options I set make no difference. I set all of the sexual assault chance options to 0% but they still start. I tried changing the default tags but I still get the default ones like cowgirl. What did I do wrong
Airianna Posted April 8, 2017 Posted April 8, 2017 Does Untamed mess with defeat? Cause my wolves or any animal in my pack rape human males *only want females as victims of creatures*.  I then turned off enable creatures to sexually assault a defeated NPC and my pack creatures still rape any defeated enemy or ally no matter the gender.  also, I see that once they start doing the animations the wolf changes into a smaller size model only with males.  my load https://pastebin.com/hFKXdtAk  I'm going to test just disabling creatures in Sexlab and see if it still does it.  Edit: nope they don't do it after I disable creatures in the sexlab menu, well at least I found a workaround....is there a way to disable male race's for creatures?   Creature Framework, I believe is where you set the gender preferences for creatures. If you have that set, creature on NPC to female only, it should take care of your problem. If that does not fix it, then it is possible that your wolves are set as female via the mod.
tontoman Posted April 9, 2017 Posted April 9, 2017      Is there a way for a scene to include 4somes or 5somes? Have the appropriate animations installed and registered. the only ones i've seen are some by FunyBiz, but i tend to use his stuff with caution as there are Necro and Guro anims lumped in there as well.  Have animations installed and registered, but I always get soloed when defeated.   You have to increase the chance for multiples (3 somes) as victim. And be sure there is more than 1 aggressor. I personally don't mind them 1 at a time at all. Sometimes, it's rather enjoyable.  I have the percentage rather high.  Under Player As Victim, 3 some chance, I left that at 30% myself. Not sure if Creature multiples has the same meaning, but I don't think it does. Also, you have to go through your Sexlab registered animations, and make sure they are enabled to be chosen. *might of unchecked them by accident, I've done it before. Had to re-register all animations, then carefully remove the ones that have never looked physically possible.*   Yeah, for the OP I'd like to know if you meant creatures or humans, and if you're missing 3somes. Because the wording of only getting solo, and not getting 4-5somes are (or can be) two different issues.  Because I have a feeling that the 'threesome' setting is literal, that's all you get. IIRC the prior version had me having 4-5somes with bandits (non creatures) and funnybiz animations. But don't get them now.  Might be because with the newer animation filtering tools, that threesome option limits you.  As opposed to creature animations that's just multi allowed and allows for multi creatures of any amount. Â
thexelx Posted April 9, 2017 Posted April 9, 2017  Creature Framework, I believe is where you set the gender preferences for creatures. If you have that set, creature on NPC to female only, it should take care of your problem. If that does not fix it, then it is possible that your wolves are set as female via the mod.   Yea I put it on males and only males.....still does it.  also if i select a wolf or any animal, sexlab menu marks them as female and I cannot change them to male....Idk why sexlab takes priority over other mods on the gender..aroused creatures, creature framework, both say male...Sexlab marks my PC as female cause I am but every single creature is marked female..I don't know if sexlab means thats the default or something.  Every single mod other than sexlab marks them as male, also they sexually assault even if I disable NPC vs NPC or follower vs NPC in defeat. I'm starting to think death alternative is doing something so tonight I'm just going on a mod rollback spree.
baga3810 Posted April 9, 2017 Posted April 9, 2017 I have a strange bug when I try kill enemy (bleeding or rope), I'm dying too, maybe someone had this?
Filmwolf Posted April 14, 2017 Posted April 14, 2017 I have recently installed Skyrim on a new computer and have just gotten around to installing back my mods ( i have not played skrim recently also and I have not been following any changes to any sex lab mods) I installed the most recent of all the mods I have used in the past and for some reason SexLab defeat is not showing in MCM ( I have used the console and entered the setstage command which has not solved my issue) I installed SL Defeat v5.3.5.rar does anyone know of a solution it would be a great help.
jfraser Posted April 14, 2017 Posted April 14, 2017 I have recently installed Skyrim on a new computer and have just gotten around to installing back my mods ( i have not played skrim recently also and I have not been following any changes to any sex lab mods) I installed the most recent of all the mods I have used in the past and for some reason SexLab defeat is not showing in MCM ( I have used the console and entered the setstage command which has not solved my issue) I installed SL Defeat v5.3.5.rar does anyone know of a solution it would be a great help.I'm assuming this is on a new game. Sometimes that happens with the mcm (not just for defeat, but for any mod). There is a command to refresh the mcm menus but it doesn't always work (and i don't remember it off the top of my head anyway). Starting a new game usually fixes this issue for me.
Saturnine Posted April 14, 2017 Posted April 14, 2017 Context: So with defeat downloaded, I turned off player as victim and aggressor as I don't want my character to take part in post combat sex. Then in npc vs npc settings, set followers as both aggressors and victims so that in between battles, my character can come to the rescue or just be an observer. I increased the values for how easily a follower can be knocked down and all my followers are essential so that I don't lose them somewhere. I have 3 of them following me at a time and I'm wondering what has to happen in order for a particular scenario to work out perfectly. Currently, when my followers get knocked down or reach bleed out, instead of mounting them, enemies simply focus on targeting me or the other followers with attacks.   Problem: Id like for enemies to simply follow through with a sex scene once they manage to knock down a follower and ignore my character and others. I don't want to change the player as a victim but I did see there was an option for all followers to be forced upon once the player is knocked down. Is there a way to fix this or is this just an ai problem?
Suppacalifragilist Posted April 14, 2017 Posted April 14, 2017 For some reason the sack stopped working on my game. The NPC just doesn't appear when I release. Does someone know twhy this is happening? It worked fine for a long time but now suddenly it doesn't
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now