Devious Devices SE

[zarantha]

4 hours ago, wutpickel said:

BHUNP. Is that what i did wrong?

 

DD 5.2 has the following options:

 

CBBE SE/3BA

UNP

 

DD 5.1 has these options:

 

CBBE SE

UNP

 

There is no BHUNP in the DD installer. BHUNP is a separate mod that is not supported directly here.

 

If you chose CBBE SE/3BA then any mesh that does not have a bodyslide will not fit your body correctly.

If you chose UNP in the DD installer, you should be fine, except when there is an issue with the BHUNP bodyslide.

The BHUNP bodyslides will overwrite the UNP ones,  but you still need to select UNP in the DD installer as the base.

If there is a DD UNP bodyslide that does not have a corresponding BHUNP bodyslide, then you must build the UNP bodyslide.

 

What you should have done:

1. Install DD 5.x and chose UNP for the body.

2. Install the DD BHUNP bodyslides and have them overwrite/load after DD

3. Build the DD UNP bodyslides first,

4. Next, build the BHUNP bodyslides. This will ensure you've built everything with a bodyslide that isn't covered by the DD BHUNP bodyslides.

5. If there's still an issue, then ask in the proper location, which is here:

 

[zarantha]

23 minutes ago, alexsl said:

I got told about batch building but honestly i coudnt understand what it mean. So I know i got to open bodyslide then click on batch build, but there is so many parameter so im at a lost.

 

You might want to consider googling bodyslide videos if you think this is difficult.

 

All you're doing after clicking batch build is selecting which variation you want. Usually it will be between body (CBBE SE vs 3BA) or physics (HDT or no HDT). Sometimes it will be variations on the outfit (amidianborn glass vs default glass).

 

On this, just click build. don't bother going through the list and unchecking things. you want to build something for each piece and if you don't know what you're doing, you will probably disable more than you should.

 

This is the only place you need to make decisions. This shows you where there are two or more bodyslides for the same outfit. all you need to do is pick one.

 

After you've selected what you want, click ok and it will run.

When it's done, just close bodyslide.

[alexsl]

It seem to have work as i played yesterday. The only problem i notice was the armbinder wither texture and that this same armbinder didnt bound the arm. I guess so does the leg cuff are they ment to bound the anckle because mostly they didn't either. Ah and the harness gag didn't really fit in the mouth,

Edited December 30, 2021 by alexsl

[Guest]

13 hours ago, zarantha said:

What you should have done:

1. Install DD 5.x and chose UNP for the body.

2. Install the DD BHUNP bodyslides and have them overwrite/load after DD

3. Build the DD UNP bodyslides first,

4. Next, build the BHUNP bodyslides. This will ensure you've built everything with a bodyslide that isn't covered by the DD BHUNP bodyslides.

5. If there's still an issue, then ask in the proper location, which is here:

 

Cool. So that is where my mistake was. Thanks for clearing that up.

I will try that out and if it does not do it, perhaps switch to a UNP body.

[zarantha]

6 hours ago, alexsl said:

It seem to have work as i played yesterday. The only problem i notice was the armbinder wither texture and that this same armbinder didnt bound the arm. I guess so does the leg cuff are they ment to bound the anckle because mostly they didn't either. Ah and the harness gag didn't really fit in the mouth,

 

Look through the troubleshooting post please. most of this is mentioned in there.

 

gags - you need mfg fix installed.

 

leg cuffs - either you don't have HDT SMP working, or you haven't saved, exited the game completely, and reentered. note - some chains will never connect right. ankle chains will, but need the save/exit/load game every single time you equip them.

 

armbinder -can't tell if you mean missing textures or the animation. animation could be because of nemesis or another animation replacer. use fnis only with DD, and you will need to reinstall DD if you're removing nemesis. If you don't have nemesis, some DAR packs can do this as well, or fnis sexy move. for DAR packs, remove them until it works, i don't know which are compatible and which are not. For fnis sexy move, toggle player 360 move off and back on.

 

for missing textures, install the textures from the troubleshooting post if you don't have DCL. if you have DCL or they are still missing after installing those textures, reinstall DD - your mod manager messed up and did not install all of them.

[alexsl]

4 hours ago, zarantha said:

 

Look through the troubleshooting post please. most of this is mentioned in there.

 

gags - you need mfg fix installed.

 

leg cuffs - either you don't have HDT SMP working, or you haven't saved, exited the game completely, and reentered. note - some chains will never connect right. ankle chains will, but need the save/exit/load game every single time you equip them.

 

armbinder -can't tell if you mean missing textures or the animation. animation could be because of nemesis or another animation replacer. use fnis only with DD, and you will need to reinstall DD if you're removing nemesis. If you don't have nemesis, some DAR packs can do this as well, or fnis sexy move. for DAR packs, remove them until it works, i don't know which are compatible and which are not. For fnis sexy move, toggle player 360 move off and back on.

 

for missing textures, install the textures from the troubleshooting post if you don't have DCL. if you have DCL or they are still missing after installing those textures, reinstall DD - your mod manager messed up and did not install all of them.

 Yes well for the armbinder I ment that my arm were moving normaly unlike they would be if they were in the armbinder and well the armbinder appear as pink, no texture watsoever. Also I applied the fix for the gag, I have yet to see if it work, but i did read furter and the one who ask the question about the gag seem to still have the problem after the fix.

 

Also you were talking about Nemesis but i dont have that at all, i only have the mod that was previously shown.

[alexsl]

but also just to be sure in here she isnt wearing any bondage watsoever and i also redid debug in dcl to be sure of it. But we cant see her body at all.

 

https://i.imgur.com/PkfdqNN.png

[zarantha]

30 minutes ago, alexsl said:

 Yes well for the armbinder I ment that my arm were moving normaly unlike they would be if they were in the armbinder and well the armbinder appear as pink, no texture watsoever. Also I applied the fix for the gag, I have yet to see if it work, but i did read furter and the one who ask the question about the gag seem to still have the problem after the fix.

 

Also you were talking about Nemesis but i dont have that at all, i only have the mod that was previously shown.

 

There is one armbinder that is actually pink. What is the name of your armbinder in game?

Have you reinstalled DD?

 

Mfg fix works for all normal heads. If your preset has a sculpt, you're on your own. That is the only time when Mfg fix doesn't fix the gags. To fix it if your head has a sculpt, you need to adjust your head to fit the gag in racemenu. or edit the gag in outfit studio. I'd recommend changing to a preset that uses the default head instead of a sculpt though, since I'm not going to walk someone through doing those that has trouble with the simple thing of just running bodyslide in the first place.

 

You still haven't said if you have DAR animations or FNIS Sexy Move. Those also cause the arms to not stay in the pose, like i said before.

If you do not have those either, then you have some other mod conflicting or you have not run FNIS. All I can say for conflicts, is remove all your mods and only install DD and it's requirements an make sure you run FNIS. Test on a brand new game by clicking "New Game". Do not test with a save where you have created the character and configured MCMs before.

 

18 minutes ago, alexsl said:

but also just to be sure in here she isnt wearing any bondage watsoever and i also redid debug in dcl to be sure of it. But we cant see her body at all.

 

https://i.imgur.com/PkfdqNN.png

 

As I said before, run bodyslide. This is not a mcm setting, debug will not help you. Running bodyslide is not optional. the meshes for many outfits do not exist until you create them when running bodyslide. This is why the outfit is invisible.

 

 

Expand this section on that link and follow the directions.

[Dante551]

Im having a few problems, and i assume im doing something wrong, but im not quite sure what so was wondering if i could get some help or pointed in the right direction.

 

im running the SE version(5.1 DD and 9.0 DCL respectively), and the issue i am having is three fold:

 

The DCL 3BBB download link in the troubleshooting section is broke, or at least its telling me it is, not sure if i need it or if its contained in something else??

 

Using the safe word from DCL crashes my game during the removal of items, not sure whats causing that, but i found out this morning while trying to clear up issue three below, and its a minor thing to begin with.

 

the most biggest one though is i cannot for the life of me get a few items to appear from both DCL and DD, ive ran body slide several times, and made sure the items im having issues with are selected, but they just dont appear, one makes my hands go transparent. The Pony tail, the Paw Mittens and (I think, i cant actually check) the pony mask thing?

 

Everything else works from what ive seen so far.

[Neonnimbus]

Does anyone know what would cause gags to unequip when starting a SL animation? I had no issues previously but I recently added a few combat mods and now starting animations with gags equipped unequips them for the scene.

 

Edit: Did a reinstall of DD and issue still occurs

Edited December 31, 2021 by Neonnimbus

[alexsl]

On 12/30/2021 at 7:21 PM, zarantha said:

Mfg fix works for all normal heads. If your preset has a sculpt, you're on your own. That is the only time when Mfg fix doesn't fix the gags. To fix it if your head has a sculpt, you need to adjust your head to fit the gag in racemenu. or edit the gag in outfit studio. I'd recommend changing to a preset that uses the default head instead of a sculpt though, since I'm not going to walk someone through doing those that has trouble with the simple thing of just running bodyslide in the first place.

 

You still haven't said if you have DAR animations or FNIS Sexy Move. Those also cause the arms to not stay in the pose, like i said before.

If you do not have those either, then you have some other mod conflicting or you have not run FNIS. All I can say for conflicts, is remove all your mods and only install DD and it's requirements an make sure you run FNIS. Test on a brand new game by clicking "New Game". Do not test with a save where you have created the character and configured MCMs before.

 

 

I will answer some of those question and I have yet to test the bodyslide again since i have been busy. So for the "do you have a sculpt" no I do not i just been using what come up with the game when i was creating a character. So my head is one for wood elf female since i heard the Devious Device wasn't made with man body in mind. 

 

Then you ask if I have DAR animation or Fnis sexy move I do not but I did run FNIS each time time since it does run pretty much everytime you add a mod wich then i have to click on update. Then you said there could be conflict between the mod, but I pretty sure that normaly Vortex (my mod manager) pick up on those conflict because I've seen it when there was conflict but i the moment i do not have any warning.

Edited January 1, 2022 by alexsl
Add another problem

[alexsl]

Well so on the note of Bodyslide i got no preset at all where every video tutorial i seen when they open bodyslide it come with the preset so ive google and found possibily some preset for new race and some, but either way i dont know why their was complete with preset while mine issnt and reinstalling doesnt fix it.

 

Actually....so now i've try installing Remodeled Armor but when done so in Outfit/body there was no more of DDA or DDX or any of the devious stuff. Tried uninstalling bodyslide and the armor but now in doesn't load anything.

Edited January 1, 2022 by alexsl

[Wallthebruce]

On 3/31/2021 at 12:29 AM, zarantha said:

 

You're using an old version of DD or DCL before the script fixes were included, or you're using the LE versions of the old mods.

This is fixed in DD 5.1 and DCL 9.0 - Kimy has incorporated the script fixes so we don't need to convert the scripts to SE compatible checks anymore. The updates to the scripts check for Racemenu SE's skee.dll in addition to LE's nioverride.dll. Skee is the replacement for nioverride in SE.

 

Download and install Racemenu SE, DD SE 5.1 and optionally DCL SE 9.0 and you shouldn't see the nioverride warning.

 

I have the same problem but I have the last version of Racemenu SE (V0-4-16) , DD SE (5.1) and the DCL SE (9.0) can it be a issue with the AE update?

[cloudygremlin]

This mod shows as being Form 43 which is not support in Legendary Edition, Special Edition, OR Anniversary Edition (Form 43 is Windows 32 Oldrim format). This mod will not work correctly till its been fixed

[Elsidia]

1 hour ago, Wallthebruce said:

DD SE (5.1)

Not work with AE version. There is dll what is incompatible with AE and because equip process work slow or not work anymore. You need use DD SE 5.2 beta 3 with dll what is compatible with AE.

[Elsidia]

7 minutes ago, Kisobel said:

This mod shows as being Form 43 which is not support in Legendary Edition, Special Edition, OR Anniversary Edition (Form 43 is Windows 32 Oldrim format). This mod will not work correctly till its been fixed

Bullshit.

As fact that legendary version is 32 bit game)

SE version is 64 bit version

AE is SE version with new C++ run-time library because there not work any dll what is compiled on old C++ run-time library.

 

And SE version work excellent with Form 43.  Also if you want - you can convert DD to form 44, but it can made problems because DD is write for Form 43 LE version.

[Elsidia]

16 hours ago, Neonnimbus said:

Does anyone know what would cause gags to unequip when starting a SL animation?

If you have zaz 8 it can cause remove gags.

Also if you have disable DD animations filter in DD it's unequip any DD item and then start sex scene - Check DD MCM

[viod275657]

After I installed True Directional Movement, I can't move at all when wearing Hobble dress , is there any solution for this?

[Wallthebruce]

46 minutes ago, Elsidia said:

Not work with AE version. There is dll what is incompatible with AE and because equip process work slow or not work anymore. You need use DD SE 5.2 beta 3 with dll what is compatible with AE.

thx for the quick answer! where can I get the 5.2 beta?

[Elsidia]

51 minutes ago, Wallthebruce said:

thx for the quick answer! where can I get the 5.2 beta?

here: https://www.loverslab.com/topic/69936-devious-devices-framework-developmentbeta/?do=findComment&comment=3615759

[gamefan7710]

1 hour ago, viod275657 said:

After I installed True Directional Movement, I can't move at all when wearing Hobble dress , is there any solution for this?

This work for me: install  this  patch  (is not made by me, but  i don't remember the name of the author, damn......) after Devious Device, run Fnis,  then before  wearing a hobble dress reduce the "hobble skirt debuff strenght" to 30 in the MCM settings of "Devious Device" (if you are wearing a hobble dress, remove it, change the setting and then re-equip it); in alternative you can turn off "true directional movement" in the MCM when you  wear a  hobble dress  and then turn it on  after you removed it

Hobble Dress Bunny-Hop Test.7z

Edited January 1, 2022 by gamefan7710

[alexsl]

16 hours ago, alexsl said:

 

 

I will answer some of those question and I have yet to test the bodyslide again since i have been busy. So for the "do you have a sculpt" no I do not i just been using what come up with the game when i was creating a character. So my head is one for wood elf female since i heard the Devious Device wasn't made with man body in mind. 

 

Then you ask if I have DAR animation or Fnis sexy move I do not but I did run FNIS each time time since it does run pretty much everytime you add a mod wich then i have to click on update. Then you said there could be conflict between the mod, but I pretty sure that normaly Vortex (my mod manager) pick up on those conflict because I've seen it when there was conflict but i the moment i do not have any warning.

 

8 hours ago, alexsl said:

Well so on the note of Bodyslide i got no preset at all where every video tutorial i seen when they open bodyslide it come with the preset so ive google and found possibily some preset for new race and some, but either way i dont know why their was complete with preset while mine issnt and reinstalling doesnt fix it.

 I am reposting since ive gone unanswered

Edited January 1, 2022 by alexsl

[ebbluminous]

39 minutes ago, alexsl said:

 

 I am reposting since ive gone unanswered

You are complaining people are not responding fast enough on. New. Years. Day...

[alexsl]

Note that this isn't really the case. There was at least 8 answer after me or so i didn't count but if I would be the one answering to me I would have not seen my answer because people posted after. I dont care that I get answered in few day im just making life simpler.

But sure think what you want.

[Herowynne]

5 hours ago, viod275657 said:

After I installed True Directional Movement, I can't move at all when wearing Hobble dress , is there any solution for this?

 

I have the same issue. I simply increase my movement speed with the console whenever I get a hobble dress equipped on me.

 

player.modav speedmult 100

 

Later, when the hobble dress is removed, I reduce my extra movement speed. This part is optional, if you feel like you are moving too fast.

 

player.modav speedmult -100