Sexout New Vegas Pregnancy

[defning089]

How would I remove the body swap armor feature?

 

Edit: It is the "SexoutP5BodySwapTokenF" that's causing the problem. Removing this via Xedit causes the main menu to not load the UI. For now, I'll just use console commands to remove the token.

Edited April 10, 2023 by defning089

[Neutron_rus]

1 hour ago, defning089 said:

How would I remove the body swap armor feature?

 

Edit: It is the "SexoutP5BodySwapTokenF" that's causing the problem. Removing this via Xedit causes the main menu to not load the UI. For now, I'll just use console commands to remove the token.

you can't fully remove it w/o rewriting the whole mod, so just set max belly size to 0 in mcm

[Jade514]

Hey so i might be being a bit of a noob but i am noticing pregnancy was working but after my chracters last pregnancy i waited about 2 days then slept with an npc and waiting a couple days in game and my character has not become pregnant i checked the medical scanner thingy and noticed is said ova - 0 so since i have never really checked the scanner before i just thought i should ask just in case something on my end broke if the ova - is supposed to sometimes be 0 as in is the mod scripted to have a cycle thingy for the ova or is it broken?

sorry again if being a noob just thought i should ask before i assume.

Edited April 17, 2023 by WolfPack51942

[Neutron_rus]

1 hour ago, WolfPack51942 said:

Hey so i might be being a bit of a noob but i am noticing pregnancy was working but after my chracters last pregnancy i waited about 2 days then slept with an npc and waiting a couple days in game and my character has not become pregnant i checked the medical scanner thingy and noticed is said ova - 0 so since i have never really checked the scanner before i just thought i should ask just in case something on my end broke if the ova - is supposed to sometimes be 0 as in is the mod scripted to have a cycle thingy for the ova or is it broken?

sorry again if being a noob just thought i should ask before i assume.

it's cycles, increases from 0 up to 3 over time depending on settings, it might also show negative value sometimes, but just treat it as 0

[Jade514]

Hey thank you for the information that is good to know i was a little worried it was a bug or something good to know that is what it is supossed to do.

 

 

now i have another question and that was do the pregnancy body's use my default body textures or does it use a custom one?

Edited April 18, 2023 by WolfPack51942

[Neutron_rus]

50 minutes ago, WolfPack51942 said:

Hey thank you for the information that is good to know i was a little worried it was a bug or something good to know that is what it is supossed to do.

 

 

now i have another question and that was do the pregnancy body's use my default body textures or does it use a custom one?

almost all bodies uses skin shader instead of default shader, that means that textures from race (custom or not) will overwrite any default textures that this body is using. This might cause a problem with bodies like cbbe, that uses different texture layout compare to everything else that we're using.

if in case you found an outfit that doesn't carry over the race texture and shows default one, just report it here with a name of outfit 

[SquishyX4]

I'm having an issue with this mod making the main menu options and cursor disappear. I've disabled it and the options returned, so it's definitely this mod causing the issue. I've updated all the required mods, have the NX Extender, and have the load order formatted correctly. Any help would be appreciated. 

Edit: I use MO2. I created the plugins folder in the NVSE folder and put nvse_extenderV19 into that. Still no dice.

Edited April 22, 2023 by DeadlyDirt

[Neutron_rus]

12 hours ago, DeadlyDirt said:

I'm having an issue with this mod making the main menu options and cursor disappear. I've disabled it and the options returned, so it's definitely this mod causing the issue. I've updated all the required mods, have the NX Extender, and have the load order formatted correctly. Any help would be appreciated. 

Edit: I use MO2. I created the plugins folder in the NVSE folder and put nvse_extenderV19 into that. Still no dice.

SOPreg is heavily depends on SCR, so if you only updated SOPreg, but not SCR, then it might cause this
also make sure that you don't have very old mods that changes SCR/SOPreg

Edited April 23, 2023 by Neutron_rus

[SquishyX4]

10 hours ago, Neutron_rus said:

SOPreg is heavily depends on SCR, so if you only updated SOPreg, but not SCR, then it might cause this
also make sure that you don't have very old mods that changes SCR/SOPreg

It was SCR! Thanks!

[dhkLover]

Been using you SOFA mod for a while in tandem with Fertile Breeder. I noticed a small issue. My character showed visible signs of pregnancy and they even got the p1 version of the armor they were wearing. But in order to infiltrate NCRCF, I switched armors to one of the powder ganger ones. After that my character lost the pregnancy belly and the armors also reverted to non pregnant ones once I re-equipped them. Using the medical scanner showed me the pregnancy was still in progress but no visible effect was seen after that. Any fix for this?

 

Apologies if this has been addressed before.

[dborg2]

2 hours ago, dhkLover said:

Been using you SOFA mod for a while in tandem with Fertile Breeder. I noticed a small issue. My character showed visible signs of pregnancy and they even got the p1 version of the armor they were wearing. But in order to infiltrate NCRCF, I switched armors to one of the powder ganger ones. After that my character lost the pregnancy belly and the armors also reverted to non pregnant ones once I re-equipped them. Using the medical scanner showed me the pregnancy was still in progress but no visible effect was seen after that. Any fix for this?

 

Apologies if this has been addressed before.

It sounds really weird. Something I can think of, is that perhaps you were seeing P1 as a combination of Cumbloating and pregnancy and perhaps the cum-decreased faster then the pregnancy increasing.

[dhkLover]

23 hours ago, dborg2 said:

It sounds really weird. Something I can think of, is that perhaps you were seeing P1 as a combination of Cumbloating and pregnancy and perhaps the cum-decreased faster then the pregnancy increasing.

 

Hmm. I'll try disabling cum bloat and testing your theory out and then get back to you on that.

 

EDIT : OK. So after some decent testing, I can say that disabling cum bloat stopped the outfits from reverting to the non pregnant versions for the duration of the pregnancy. My character's body after removing all clothing still doesn't show any visible signs of pregnancy though. I'm using "Type 4 Body and Armors" from the nexus for female body and "New Vegas Compatibility Skeleton" for the skeleton. I make sure that I load NVCS last to ensure no overwriting takes place, but I noticed that I'm using the vanilla weights version. Is that the culprit? Should I switch to default? I use MO2 for mod management BTW.

Edited April 28, 2023 by dhkLover

[Neutron_rus]

42 minutes ago, Ketchup_tortex_lagodny69 said:

for some reason i cannot get pregnant even if i turn on "always get pregnant" have anyone else encountered this issue an if yes how to fix it?

 

"always get pregnant" means that you'll get pregnant as soon as all the requirements is met for it, skipping all the rng checks, requirements is: have an ova, have cum inside womb, have fertility of 20-70% or more.
If you have problems with getting cum inside womb, then you need to check your settings in Spunk mod, or there's experimental setting in SOPreg to skip some of cum calculation checks, might not work though

[idunn01]

Is it just me, or has SexoutOffSpring.esm disappeared from the downloads section?

[dborg2]

2 hours ago, idunn01 said:

Is it just me, or has SexoutOffSpring.esm disappeared from the downloads section?

Ooops. I fixed it.

[Machiavelique]

In SexoutP3SUDFPregnancy, can you remove forcing the display of fCurrPregSize in the console and put it in a debugPrint instead? That way, we won't know in advance if we're pregnant (when debug mode is turned OFF).

Edited May 28, 2023 by Machiavelique

[Neutron_rus]

12 minutes ago, Machiavelique said:

In SexoutP3SUDFPregnancy, can you remove forcing the display of fCurrPregSize in the console and put it in a debugPrint instead? That way, we won't know in advance if we're pregnant (when debug mode is turned OFF).

sure, i'll look into it

[doopdoo]

I see its been updated a bunch lately, glad to see it

Since I cant check myself anymore, can anyone tell me if the insect pregnancies work now? their sperm would never take for some reason last I tried

[Neutron_rus]

2 hours ago, doopdoo said:

I see its been updated a bunch lately, glad to see it

Since I cant check myself anymore, can anyone tell me if the insect pregnancies work now? their sperm would never take for some reason last I tried

it's not a problem of SOPreg, that's how Spunk works, with default settings of Spunk it's very hard to get pregnant

[doopdoo]

51 minutes ago, Neutron_rus said:

it's not a problem of SOPreg, that's how Spunk works, with default settings of Spunk it's very hard to get pregnant

How is it spunks fault? Pregnancy is from SOPreg and the bug pregnancies are the ones breaking while everything else works, no matter the settings only bug preg wouldn't work even with super fertile everything and turning on the "cum=pregnant instant" setting

[Neutron_rus]

3 hours ago, doopdoo said:

How is it spunks fault? Pregnancy is from SOPreg and the bug pregnancies are the ones breaking while everything else works, no matter the settings only bug preg wouldn't work even with super fertile everything and turning on the "cum=pregnant instant" setting

SOPreg will work only if Spunk passes the right data to SOPreg, if no data is sent, i.e. no cum in womb, pregnancy have no data to work with, instant pregnancy works only if cum is present in womb and if you have an ova, cum bypass setting is experimental and not fully tested yet. Fertility settings affects Spunk slightly and increasing speed of cum migration, so you have higher chances to get cum in womb, cum migration settings can be changed in Spunk itself. Also make sure that you're using NX19 as older versions have problems with xNVSE and might cause this types of problems where Spunk data is not sent correctly

[Valarien]

I have a similar problem to that of Roadrage512.  I cannot change my pregnancy length in mcm either it will default back to 3% shortly after I close it.  I loaded older saves and found one save a long time ago in which I was able to change that setting without it defaulting back to 3%.  This is not the first time I have had this problem before in past playthroughs I ended up just dealing with it as best as I could.  It does not make the game unplayable but it is simply quite the annoying little detail.

[Neutron_rus]

2 hours ago, Valarien said:

I have a similar problem to that of Roadrage512.  I cannot change my pregnancy length in mcm either it will default back to 3% shortly after I close it.  I loaded older saves and found one save a long time ago in which I was able to change that setting without it defaulting back to 3%.  This is not the first time I have had this problem before in past playthroughs I ended up just dealing with it as best as I could.  It does not make the game unplayable but it is simply quite the annoying little detail.

default is not 3% though, so there's something else is going on, either you doing something wrong or some mods messing it up

[Valarien]

17 hours ago, Neutron_rus said:

default is not 3% though, so there's something else is going on, either you doing something wrong or some mods messing it up

Mmmmhmmmm and it is a problem I have had before in the past and it is always 3%.  I load a old enough save and it is not a problem on that save or earlier.

[Neutron_rus]

7 hours ago, Valarien said:

Mmmmhmmmm and it is a problem I have had before in the past and it is always 3%.  I load a old enough save and it is not a problem on that save or earlier.

Default is 30%, reset on slider is 100%, 3% is only recommended by us for some mods and is not set by default. Check if it works with a fresh new save and what values you get. If it's 30% and you can switch it then it's a problem with your save files. If it's 30% but you can't switch it, then check your nvse plugins. If not 30% then you have mods that overwrites it. I don't really know how else to help here, as w/o extra information and/or proper debug logs, all i can do here is only guess stuff

Edited July 3, 2023 by Neutron_rus