Elsidia Posted March 27, 2021 Posted March 27, 2021 16 minutes ago, tekkkie said: MCM > Deviously Helpless > Maintenance > Reset animation Also seems to fix it, but only works for that one instance. Not sure what there is but can only suggest that maybe you have wrong sexlab installation or new DD sex animations conflict with Deviously helpless. I drop this mod because i was tired of many sex attacks in city. DCL have own sex attacks what can happen in city 1 time per hour if you have condition for it (example - run naked in city, have enough aroused etc). And even i lower chance to 40% for me it's too much. You use nemesis or fnis? With nemesis DD work bad or not work. UPD: Spoiler If you want rape - sleep into inn naked or in dungeon. With DCL you got lot)
shadychild Posted March 27, 2021 Posted March 27, 2021 Hey i need help with some few problems i got recently. Could somebody help me with problems connected to the CL mod. CL worked fine first but suddenly the Cursed loot mcm went blank and now its gone! Why is this happening? Another issue i have are that when i try to restrain people nothing happens, i ask people if they want to be restraint but no dialogues are showing. What could be the problem and how do i solve it? I Also got the "Whore Collar" on my PC and it forcing my pc to be naked all the time. i can't get it off and i tried to google it but found nothing. How do i get it off?. Edit: Should i try to reinstall the mod? load order.txt
Elsidia Posted March 27, 2021 Posted March 27, 2021 43 minutes ago, shadychild said: Also got the "Whore Collar" I suppose you need papirus util mod for SE: https://www.nexusmods.com/skyrimspecialedition/mods/13048 Also i suggest you need install all Skyrim SE engine fixes. You can reinstall mod with caution: you need remember your mod load order and later restore to this original for save not to break anything. I don't know from what mod goes "do you want com" but also i can suggest if you have installed all requirement for DCL (as papyrus util mod) then this mod can break a dialogues. UPD: What is CL? And i don't know why you loose a DCL MCM. Seems there too are problem. Can you offer a papyrus log?
shadychild Posted March 27, 2021 Posted March 27, 2021 1 hour ago, Elsidia said: I suppose you need papirus util mod for SE: https://www.nexusmods.com/skyrimspecialedition/mods/13048 Also i suggest you need install all Skyrim SE engine fixes. You can reinstall mod with caution: you need remember your mod load order and later restore to this original for save not to break anything. I don't know from what mod goes "do you want com" but also i can suggest if you have installed all requirement for DCL (as papyrus util mod) then this mod can break a dialogues. UPD: What is CL? And i don't know why you loose a DCL MCM. Seems there too are problem. Can you offer a papyrus log? I have already installed Papyrusutil for SE and the Engine fixes part 1 and 2. with CL i meant Cursed Loot. Can you explain how i get Papyrus log?
Elsidia Posted March 27, 2021 Posted March 27, 2021 26 minutes ago, shadychild said: Can you explain how i get Papyrus log? https://www.nexusmods.com/skyrim/articles/368/ UPD: about missing mcm menus - you can force reload all mcm with console comand Open console and type setstage SKI_ConfigManagerInstance 1 It must reload all MCM and if CL not damaged it must shows up.
shadychild Posted March 27, 2021 Posted March 27, 2021 14 minutes ago, Elsidia said: https://www.nexusmods.com/skyrim/articles/368/ UPD: about missing mcm menus - you can force reload all mcm with console comand Open console and type setstage SKI_ConfigManagerInstance 1 It must reload all MCM and if CL not damaged it must shows up. Ok i did the setstage SKI_ConfigManagerInstance 1 in console and something happened. the Cursed Loot mcm are now visible but inside it it's blank. norhing shows up. i tried to wait for a couple of minutes but nothing.
lluser1972 Posted March 27, 2021 Posted March 27, 2021 4 hours ago, Elsidia said: Hmm... silly question In your script and quest block you activate dcur_menu: dcur_mcmconfig Property dcumenu Auto Also no errors means you turn off on papyrus logging and there no output errors? Like Unlock operation timed out and failed. Aborting? Not a silly question at all - but yep I have. After I posted I started dissecting the papyrus logs and it shows Spoiler [03/27/2021 - 10:34:07PM] Error: Cannot call GetName() on a None object, aborting function call stack: [zadQuest (1700F624)].zadlibs.LockDevice() - "zadLibs.psc" Line 375 [DTST_TestQuest (A1000D62)].QF_DTST_TestQuest_09000D62.Fragment_0() - "QF_DTST_TestQuest_09000D62.psc" Line 45 [03/27/2021 - 10:34:07PM] Warning: Assigning None to a non-object variable named "::temp2" stack: [zadQuest (1700F624)].zadlibs.LockDevice() - "zadLibs.psc" Line 375 [DTST_TestQuest (A1000D62)].QF_DTST_TestQuest_09000D62.Fragment_0() - "QF_DTST_TestQuest_09000D62.psc" Line 45 Seems like zadlibs is failing on getname (!) which seems to imply it is not getting anything passed into deviceinventory properly for LockDevice fundtion. No idea why - going to recreate a test quest from scratch and give it another go.
shadychild Posted March 27, 2021 Posted March 27, 2021 29 minutes ago, Elsidia said: https://www.nexusmods.com/skyrim/articles/368/ UPD: about missing mcm menus - you can force reload all mcm with console comand Open console and type setstage SKI_ConfigManagerInstance 1 It must reload all MCM and if CL not damaged it must shows up. Here is my papyrus log. Papyrus.0.log
zarantha Posted March 27, 2021 Posted March 27, 2021 3 hours ago, shadychild said: Hey i need help with some few problems i got recently. Could somebody help me with problems connected to the CL mod. CL worked fine first but suddenly the Cursed loot mcm went blank and now its gone! Why is this happening? Another issue i have are that when i try to restrain people nothing happens, i ask people if they want to be restraint but no dialogues are showing. What could be the problem and how do i solve it? I Also got the "Whore Collar" on my PC and it forcing my pc to be naked all the time. i can't get it off and i tried to google it but found nothing. How do i get it off?. Edit: Should i try to reinstall the mod? You didn't upgrade to DCL 9.0 mid game did you? New game only when upgrading to that version, on a game where no previous version of DCL was installed.
Elsidia Posted March 27, 2021 Posted March 27, 2021 57 minutes ago, shadychild said: Here is my papyrus log. Ok i read a log and also empty menu looks bad because i have feeling that dcur quests are stopped working. In papyrus nothing about DCL is running also only a few DCL errors what not seems critical. For better performance, you can delete all logs files, then enter in game and play about 5 min- enter in town, speak with NPC, try some dungeons chests etc. If i see then dcur activitity then maybe all not bad. Also you can try woodo: 1) Start new game in lal cell, check dcl mcm if it active. If active is bad sign for your save. If not wait into cell about 30 - 60 sec while all MCM is loading and then exit to main menu without exit from game to windows. Then start a new game again. If DCL is live now 100% will be MCM. If not then you have some mod conflicts. Anyway if you got working MCM menu with first try in new game or second, then load your save and check menu. if still not, then reload MCM config with console command what i give. Good luck!
Elsidia Posted March 27, 2021 Posted March 27, 2021 1 hour ago, lluser1972 said: which seems to imply it is not getting anything passed into deviceinventory properly for LockDevice fundtion I check the script and can say that getname is called for two variables: libs.playerRef and dcumenu.dcur_slavebelt Inventory device. Maybe something is wrong with player aliases definition. And LockDevice call function getname() only for log operation, that means you have wrong defined libs.playerRef or dcumenu.dcur_slavebelt UPD: I hope in script and in your quest is defined zadlibs Property libs Auto too?
shadychild Posted March 27, 2021 Posted March 27, 2021 40 minutes ago, zarantha said: You didn't upgrade to DCL 9.0 mid game did you? New game only when upgrading to that version, on a game where no previous version of DCL was installed. No i did not upgrade to DCL 9.0
shadychild Posted March 27, 2021 Posted March 27, 2021 1 hour ago, Elsidia said: Ok i read a log and also empty menu looks bad because i have feeling that dcur quests are stopped working. In papyrus nothing about DCL is running also only a few DCL errors what not seems critical. For better performance, you can delete all logs files, then enter in game and play about 5 min- enter in town, speak with NPC, try some dungeons chests etc. If i see then dcur activitity then maybe all not bad. Also you can try woodo: 1) Start new game in lal cell, check dcl mcm if it active. If active is bad sign for your save. If not wait into cell about 30 - 60 sec while all MCM is loading and then exit to main menu without exit from game to windows. Then start a new game again. If DCL is live now 100% will be MCM. If not then you have some mod conflicts. Anyway if you got working MCM menu with first try in new game or second, then load your save and check menu. if still not, then reload MCM config with console command what i give. Good luck! Ok. i havfe deleted all log files and played some more. i attached a new log file for you. what do you mean with "lal cell"? what do you mean with try "woodo"? Papyrus.0.log
zarantha Posted March 27, 2021 Posted March 27, 2021 2 hours ago, shadychild said: Ok. i havfe deleted all log files and played some more. i attached a new log file for you. what do you mean with "lal cell"? what do you mean with try "woodo"? Papyrus.0.log 36.67 MB · 0 downloads LAL cell is the cell you start in with the alternate start mod. It's a good place to let everything load and configure your mcms before starting the game. With a lot of mods, it can take some time for things to settle down from the scripts initializations, this gives them the time in a place where nothing else is going on. I think she meant 'to do'.
shar181 Posted March 27, 2021 Posted March 27, 2021 11 hours ago, zarantha said: Should just be the use vanilla prisons. it's under misc options now instead of it's own section. I tried that one, but unfortunately it doesn't disable the new dialogue. It only causes the "go to prison" event to send you to a normal prison instead of the DCL prison. I still can't make use of any of my guard-related mods or perks.
shadychild Posted March 27, 2021 Posted March 27, 2021 4 hours ago, Elsidia said: Ok i read a log and also empty menu looks bad because i have feeling that dcur quests are stopped working. In papyrus nothing about DCL is running also only a few DCL errors what not seems critical. For better performance, you can delete all logs files, then enter in game and play about 5 min- enter in town, speak with NPC, try some dungeons chests etc. If i see then dcur activitity then maybe all not bad. Also you can try woodo: 1) Start new game in lal cell, check dcl mcm if it active. If active is bad sign for your save. If not wait into cell about 30 - 60 sec while all MCM is loading and then exit to main menu without exit from game to windows. Then start a new game again. If DCL is live now 100% will be MCM. If not then you have some mod conflicts. Anyway if you got working MCM menu with first try in new game or second, then load your save and check menu. if still not, then reload MCM config with console command what i give. Good luck! So I Started a new game. After i created a character i spawn in LAL cell. I opened MCM and i saw DCL activated. i clicked on DCL MCM and DCL MCM was not blank anymore. What does that mean? Papyrus.0.log
Elsidia Posted March 27, 2021 Posted March 27, 2021 3 hours ago, shadychild said: "lal cell"? what do you mean with try "woodo"? I mean Vodoo - african magic. If nothing helps) Spoiler Depend of papyrus seems DCL works but all variables and aliases is cleared. i don't know how to fix it. If after start new game you see DCL MCM, then from this cell try load your save - sometimes skyrim keep variables in memory and it helps. If after load still not DCL MCM, try reload mcm menus with console. If it not help, i don't know what can help . Depend on logs save file is badly damaged. Log file is 36 mb simple text file. usually it's are size no more 1mb. Maybe if was on my computer i can use console to check all running DCL quests but it's hard to explain how to do it and also still no one time i not repair broken DCL) 1
zarantha Posted March 27, 2021 Posted March 27, 2021 35 minutes ago, shadychild said: So I Started a new game. After i created a character i spawn in LAL cell. I opened MCM and i saw DCL activated. i clicked on DCL MCM and DCL MCM was not blank anymore. What does that mean? Papyrus.0.log 550.58 kB · 1 download You may not have waited long enough. there's at least two dcl messages - the one where DCL is done loading will say something like deviously cursed loot initialized. For DCL to work, DD needs to be installed and initialized too. When starting a new game, I wait for all the messages to complete, then go in and configure DD, maybe a few other mods. Save and exit, then reload and wait for the next round of messages to complete. Try accessing the DCL mcm after this point. 1
lluser1972 Posted March 28, 2021 Posted March 28, 2021 14 hours ago, Elsidia said: I check the script and can say that getname is called for two variables: libs.playerRef and dcumenu.dcur_slavebelt Inventory device. Maybe something is wrong with player aliases definition. And LockDevice call function getname() only for log operation, that means you have wrong defined libs.playerRef or dcumenu.dcur_slavebelt UPD: I hope in script and in your quest is defined zadlibs Property libs Auto too? Thanks for you help on this. Recreated a simple quest from scratch and checking the logs i can see [03/28/2021 - 03:04:23PM] Error: Property dcumenu on script TIF__09000D66 attached to topic info A1000D66 on quest TTL_TheCode (A1000D62) cannot be bound because <NULL form> (A10012C4) is not the right type Seems to be the root of all the problems. But no idea what I am doing wrong. Full script is: Spoiler ;BEGIN FRAGMENT CODE - Do not edit anything between this and the end comment ;NEXT FRAGMENT INDEX 1 Scriptname TIF__09000D66 Extends TopicInfo Hidden ;BEGIN FRAGMENT Fragment_0 Function Fragment_0(ObjectReference akSpeakerRef) Actor akSpeaker = akSpeakerRef as Actor ;BEGIN CODE if !Libs.PlayerRef.WornHasKeyword(Libs.zad_DeviousBelt) ;character already wearing - do nothing Libs.notify("Here you go.", messagebox = true) libs.LockDevice(Libs.PlayerRef, dcumenu.dcur_slavebelt, force = true) endif ;END CODE EndFunction ;END FRAGMENT ;END FRAGMENT CODE - Do not edit anything between this and the begin comment zadlibs Property libs Auto zadxLibs Property xlibs Auto dcur_mcmconfig Property dcumenu Auto
Elsidia Posted March 28, 2021 Posted March 28, 2021 3 hours ago, lluser1972 said: But no idea what I am doing wrong. I have idea but still not sure how it fix dcur_mcmconfig is from SKYUI and Scriptname TIF__09000D66 Extends TopicInfo Hidden isn't compatible with SkyUI. As i see compatible is extends quest or extends objectreference First idea: define slavebelt in your quest and call from here. Second idea: From Fallout4 scripting experience Your quest script name kmyQuest = GetOwningQuest() as dcur_mcmconfig libs.LockDevice(Libs.PlayerRef, kmyQuest.dcur_slavebelt, force = true) Third idea: Define new restraint function in quest what is compatible with dcur_mcmconfig and cal this function from here: Your quest script name Property Illuser_libs Auto Illuser_libs.your function name One of idea must work. As i scripting in fallout4 second idea work for me. I hope diference is scripting not so far. Note: kmyQuest is build into Skyrim (Fallout4) default variable and can't be changed. Good luck in scripting!
PegadaSans Posted March 28, 2021 Posted March 28, 2021 Where can i find the changelog for DCL9.0 and DD5.1?
Elsidia Posted March 28, 2021 Posted March 28, 2021 6 minutes ago, PegadaSans said: Where can i find the changelog for DCL9.0 and DD5.1? In LE pages sections
zarantha Posted March 28, 2021 Posted March 28, 2021 5 minutes ago, PegadaSans said: Where can i find the changelog for DCL9.0 and DD5.1? On the LE pages. DD 5.1 DCL 9.0
Robmonster13 Posted March 28, 2021 Posted March 28, 2021 On 3/11/2021 at 3:42 AM, abcdefghilmn said: I know, but I don't know how to find the id of those items. Or, better, I used showinventory to have a list of my current outfits, took note of the id, went into xedit and changed the partitions of the corresponding outfits, but nothing happens in game, so I am not sure if those are the actual correct items. I'll try again later today, and report back. In any case, the issue arises with ropes during "learning the ropes": - during the second stage of the quest, you get tied up in a crotch tie and in an armbinder. Calves and forearms seem ok, but hands are suddently black - during the stage immediately after, you get tied up in a corset harness and a stricter armbinder. Same issue as bofore, calves and forearms seem ok but hands are black - after completing the quest, you get completely tied up. This causes the most problems, as your hands are black due to the armbinder and there are missing calves and forearms. At this point, if you already handed the conversion to Kimi, I might just wait for the updated version and see if you already fixed it. Otherwise I'll dig deeper I am having this exact issue. Being a newb with almost everything related to mods (except for installing them with a mod manager and OCCASSIONALLY doing a manual installation) ... when I see comments about people trying to use CK, partitions, or SSEEdit to restore missing body areas or to fix black meshes ... I really don't understand what is being discussed or suggested. My game seems stable, with practically zero CDTs and all functions/features appear to be working correctly. Although, I do wish the "Dark Fog" blindfold effect in DD 5.1 was able to be made more restrictive. I did a clean install of Devious Devices SE 5.1.7z (2,250,909 KB) and Deviously Cursed Loot SE 9.0.7z (488,884 KB) files on 3/17/2021 and started a new game. I also installed the 3BBB BodySlide files on 3/26/2021. The last thing that I want to do is go in poking around in files trying to stumble through fixing cosmetic problems and end up making a mistake and possibly trashing my installation. I can live with missing body segments for the duration of a short quest, and even with the clipping of some outfits, since I choose to use the CBBE 3BBB body. Is there a likelihood that a patch might be released in the not too distant future to update the files/records in question? Thank you to everyone involved in busting their tails to bring these OUTSTANDING mods to Skyrim SSE! After playing for less than one day using these mods; I could not imagine how mind-numbingly boring vanilla Skyrim would now be!
zoluadru1980 Posted March 28, 2021 Posted March 28, 2021 On 3/26/2021 at 2:40 PM, Elsidia said: The same, quest started after passage was blocked by stone fall in Helgen keep. Yesterday i try to manually start quest but only Chloe quest can be started that way, Bound in skyrim not. On 3/26/2021 at 2:55 PM, zarantha said: Could you maybe try without maids then? Could be the change to unbound is breaking chloe? Well, I've uninstalled Maids II and started new game and, yes... both quests have started. Buuuut XD Now I have that problem with MCM menu not appearing and also this [CRDE] zazKeywordEffectRefresh is not loaded, are you sure you installed zaz? I'm pretty sure the problem is with DCL because if I uninstall it, the error message disappears. ZAZ is installed and working. Also, I've waited to install DCL until all the other mods were charged in game. I've saved, go out of game to vortex, installed DCL, and go to the game to charge the save.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now