SexLab SE - Sex Animation Framework v1.66b - 01/18/2024

[Martok73]

34 minutes ago, OsmelMC said:

Your log basically said that you have to clean your Save with the ReSaver.

 

Also you don't need to execute the Clean System when you update the SexLab at lease something be wrong with the SexLab automatic update procedure that was wrong on the BETA 9 but should be fine on this version and should do just the required updates.

 

Always make sure of manually save the game before close it because the automatic saves are bad for load the game.

 

Read this instructions...

 

That's strange because I did clean my save with resaver and I followed those instructions. I also manually hard saved before updating, cleaned with resaver, loaded that save after updating via modmanager, waited til it said ready, then hit the CLEAN button per the instructions on that page.

 

Also your SexLab Utility Plus mod in the install instructions says to execute the CLEAN SYSTEM option, so I was following instructions twice. I want to use your SLUP mod but if it crashes everytime I use Clean System I won't be able to according to your install instructions.

 

I'm thoroughly confused now, I will try cleaning the save again in resaver and see if it throws any errors, and try again to use Clean System and will post logs of what happens.

[Martok73]

@OsmelMC After double checking my save file in resaver and finding 0 errors, I again tried following the instructions on your SexLab Utility Plus mod page and click the CLEAN SYSTEM button after loading the verified clean save file and exactly 8 seconds after getting the SexLab v1.63 Ready message in the top left of my screen the game CTD. I have tried this on 3 different characters on 3 different verified clean save files and all 3 times I get a CTD right after the "ready" message. I can't use SexLab Utility Plus if the damn game keeps CTD everytime I use the Clean System button per the install instructions, how can I make it work without using the Clean System button?

 

Here are the logs

 

Crash_2021_12_2_20-17-24.txtPapyrus.0.logCrash_2021_12_2_22-6-44.txtPapyrus.0.log

Crash_2021_12_2_22-19-33.txtPapyrus.0.log

 

 

Edit: Teleported to qasmoke just to try a "safe" place, still crashes 8 seconds after saying "Ready" crash is always occurring when it starts the "Clean Actor Stage", so something about that is causing the crash, thus if I absolutely have to "Clean System" after installing SexLab Utilitly Plus, then I can't use it, cause nothing I do or try will stop it from CTD every single time regardless of character and regardless of save file. More log files added.

Edited December 3, 2021 by Martok73

[coldu91]

So i have the AE update, I've updated SKSE and Sexlabs Framwork to the newest versions, but no matter what i do it keeps saying the Sexlab Util.dll is outdated or missing. i use MO and can see the dll is their from the new framework.

Papyrus.0.log Mod Order from loot.txt

[OsmelMC]

2 hours ago, Martok73 said:

SexLab Utility Plus mod page and click the CLEAN SYSTEM

In my SLU+ I recommend the Clean System option because some times I do changes on the Scripts that require some type of update process but I don't change the version number so the SexLab can't know what update.

 

Since you said that you are updating from some BETA to the new version, even if you are also updating the SLU+ still you don't need the Clean System because of update process of the SexLab cover the SLU+ required update.

 

The problem is that when you use the Clean System option since you also did the update of the SexLab Framework, is possible that still Mods like the SexLab Animation Load be installing Animation or other things that usually don't end long after the SexLab installation process.

 

Hit the Clean System while the SexLab Animation Load or the SLATE are still working put too much stress on the Papyrus beside the lot of errors that cause.

 

By the way on SE the Sexlab Animations Load take more than 20 minutes after the SexLab is installed to end registering all his Animations. If you also have SLATE you can't start to Reapply his ActionLog until the SexLab Animation Load Registry process be done and my more than 2000 ActionLog on the SLATE can take easley 2 hours to finish that means you should wait almost 3 hours before start the first SexLab scene or the Papyrus will be too busy to do it.

Edited December 3, 2021 by OsmelMC

[OsmelMC]

46 minutes ago, coldu91 said:

So i have the AE update, I've updated SKSE and Sexlabs Framwork to the newest versions, but no matter what i do it keeps saying the Sexlab Util.dll is outdated or missing. i use MO and can see the dll is their from the new framework.

Papyrus.0.log 189.69 kB · 1 download Mod Order from loot.txt 3.61 kB · 0 downloads

The SexLab Framework v1.64 for AE need another Mod from Nexus and that mod need to be updated. Check the download page for the link.

[IamGreatBoy]

I was wondering the schlong hotkey to angle it upwards or downwards which is C only angles it up, how do I angle it down?

[OsmelMC]

3 minutes ago, IamGreatBoy said:

I was wondering the schlong hotkey to angle it upwards or downwards which is C only angles it up, how do I angle it down?

 

 

Shift+C

 

 

But better use the "Animation Editor" page on the SexLab MCM

[GuruSR]

On 11/22/2021 at 11:54 PM, dePog said:

Just my opinion

If you want to use adult mods in Skyrim, don't install AE. It doesn't have enough supporting mods yet. You are just asking for a life of pain.

 

If you have AE already, then revert it back to SE with the free backport mod on Nexus. Then you can access hundreds of adult mods that we know will work.

 

Or, if you still have Skyrim LE, it is even more stable with Sexlab modlists.

 

To be clear, I am not part of the Sexlab mod team. I am just someone who has played Skyrim for 10 years and thought I'd put in my 2 cents.

 

Been modding since Oblivion, though workload doesn't afford me time to play SE much (now it's AE), so for me to worry about stuff working on it, I don't, as I don't think I've played it in the past 3 months.  So, I can easily wait.

 

GuruSR.

[chris312]

Found a new glitch tho admittedly it might be circumstantial. If you gift any clothing and then you have sex with npc. Any item that was toggled to remove will reappear after sex but if you return they will strip out of outfit.

[Martok73]

1 hour ago, OsmelMC said:

In my SLU+ I recommend the Clean System option because some times I do changes on the Scripts that require some type of update process but I don't change the version number so the SexLab can't know what update.

 

Since you said that you are updating from some BETA to the new version, even if you are also updating the SLU+ still you don't need the Clean System because of update process of the SexLab cover the SLU+ required update.

 

The problem is that when you use the Clean System option since you also did the update of the SexLab Framework, is possible that still Mods like the SexLab Animation Load be installing Animation or other things that usually don't end long after the SexLab installation process.

 

Hit the Clean System while the SexLab Animation Load or the SLATE are still working put too much stress on the Papyrus beside the lot of errors that cause.

 

By the way on SE the Sexlab Animations Load take more than 20 minutes after the SexLab is installed to end registering all his Animations. If you also have SLATE you can't start to Reapply his ActionLog until the SexLab Animation Load Registry process be done and my more than 2000 ActionLog on the SLATE can take easley 2 hours to finish that means you should wait almost 3 hours before start the first SexLab scene or the Papyrus will be too busy to do it.

 

Ok, so I don't need to use Clean System then since I updated from SexLab Framework 1.6.3Beta8 to 1.63. So I assume you are talking about the SexLab Animation Loader that loads the animations packs right? Should I have disabled that before trying to clean system? I don't have SLATE, should I get that and your SLATE Tweak? Will it improve the animation selection process during scenes?

 

From my own experience and not disabling the SLAL prior to updating/cleaning it took about 5-6 minutes before I would get the "SexLab v1.63 Ready" message, definitely didn't take 20 mins, guess it all depends on how beefy the PC is?

[Martok73]

So on another note right after having sex after I updated to v.163 the Total Time Spent Having Sex was wiped out and now shows ----- and does not increase at all. Neither does the individual counters for Vaginal/Anal/Oral, they don't increase either. Also what/why does it now show Most Active Partner 3 times? See below screenshots for clarification.

 

Before having sex right after update:

 

Right after having sex after update:

 

Anyway to fix this and recover my total time spent having sex?

[Sinrelm]

2 hours ago, IamGreatBoy said:

I was wondering the schlong hotkey to angle it upwards or downwards which is C only angles it up, how do I angle it down?

 

SHIFT + PAGEUP and SHIFT + PAGEDOWN

[Ashal]

1 hour ago, Martok73 said:

So on another note right after having sex after I updated to v.163 the Total Time Spent Having Sex was wiped out and now shows ----- and does not increase at all. Neither does the individual counters for Vaginal/Anal/Oral, they don't increase either. Also what/why does it now show Most Active Partner 3 times? See below screenshots for clarification.

 

Before having sex right after update:

<snip> 

Right after having sex after update:

<snip>

Anyway to fix this and recover my total time spent having sex?

 

Probably has something to do with the new stats and changed timer that were added during the betas. I'm not entirely sure the final 1.63 SE build shipped with all the changes that were made to sexlabutil.dll, will have to double check.

[Ashal]

6 minutes ago, Sinrelm said:

 

SHIFT + PAGEUP and SHIFT + PAGEDOWN

 

Better to use sexlab's hotkeys for it, since changes to the schlong angle will be saved to the adjustments profile and reused in future scenes.

[Ashal]

5 hours ago, Martok73 said:

@OsmelMC After double checking my save file in resaver and finding 0 errors, I again tried following the instructions on your SexLab Utility Plus mod page and click the CLEAN SYSTEM button after loading the verified clean save file and exactly 8 seconds after getting the SexLab v1.63 Ready message in the top left of my screen the game CTD. I have tried this on 3 different characters on 3 different verified clean save files and all 3 times I get a CTD right after the "ready" message. I can't use SexLab Utility Plus if the damn game keeps CTD everytime I use the Clean System button per the install instructions, how can I make it work without using the Clean System button?

 

Here are the logs

 

Crash_2021_12_2_20-17-24.txt 51.11 kB · 1 download Papyrus.0.log 836.21 kB · 0 downloads Crash_2021_12_2_22-6-44.txt 51.7 kB · 0 downloads Papyrus.0.log 811.26 kB · 0 downloads

Crash_2021_12_2_22-19-33.txt 48.43 kB · 0 downloads Papyrus.0.log 849.83 kB · 0 downloads

 

 

Edit: Teleported to qasmoke just to try a "safe" place, still crashes 8 seconds after saying "Ready" crash is always occurring when it starts the "Clean Actor Stage", so something about that is causing the crash, thus if I absolutely have to "Clean System" after installing SexLab Utilitly Plus, then I can't use it, cause nothing I do or try will stop it from CTD every single time regardless of character and regardless of save file. More log files added.

 

 

 

From looking at your logs, you have a LOT wrong with your installed mods to the point that it's hard to know where to start and I doubt it's SexLab related.

 

From your crash log though, it's crashing while papyrusutil checks if a form is valid, which could be tons of different mods. Check the log file, \Documents\My Games\Skyrim Special Edition\SKSE\PapyrusUtilDev.log, that should tell what form it was trying to validate last.

[coldu91]

3 hours ago, OsmelMC said:

The SexLab Framework v1.64 for AE need another Mod from Nexus and that mod need to be updated. Check the download page for the link.

i have everything updated that is on the page for version 1.64 and it keeps doing the same thing

Papyrus.0.log

[Ashal]

49 minutes ago, coldu91 said:

i have everything updated that is on the page for version 1.64 and it keeps doing the same thing

 

 

The log just confirms what the error message is already telling you, you are missing the dll plugin. You're either missing files from your install, your mod manager is overwriting it or only partially loading the files for whatever reason, your skse install is messed up, or your computer is blocking the dll from properly loading.

 

First step regardless should be to check the skse log to see if the plugin is loading correctly. And the SexLabUtil log as well.

 

Check these 2 logs:

Documents\My Games\Skyrim Special Edition\SKSE\skse64.log

Documents\My Games\Skyrim Special Edition\SKSE\SexLabUtil.log

 

Also check skse64_loader.log and skse64_steam_loader.log as well, just in case, but they are unlikely to say anything important.

 

 

[Martok73]

1 hour ago, Ashal said:

 

 

From looking at your logs, you have a LOT wrong with your installed mods to the point that it's hard to know where to start and I doubt it's SexLab related.

 

From your crash log though, it's crashing while papyrusutil checks if a form is valid, which could be tons of different mods. Check the log file, \Documents\My Games\Skyrim Special Edition\SKSE\PapyrusUtilDev.log, that should tell what form it was trying to validate last.

 

Ok, so I made a new character and here are the logs for her shortly after leaving the starting cell in LAL. I got everything setup and configured then saved and exited. I did not touch the Clean System button, wanted to let you have a look at these logs and see if they are as bad as the 300hr save file logs that is crashing on me when I Clean System in SexLab.

 

skee64.logSexLabUtil.logPapyrusUtilDev.logPapyrus.0.log

 

I think that's all the logs I've seen you mention looking at on here. Keep in mind while looking over these that the 300hr save file that crashed every time I touched the "Clean System" button has been running fine with 0 crashes even after updating to SL v1.63 just as long as I didn't mess with the "Clean System" button. Also Resaver does not show any errors for the 300hr save file either. Hopefully these logs will shed some light on what's going on as I didn't have the PapyrusUtilDev.log available immediately following the last crash. Did not know to look at it or link it so I have no reference for what form it was trying to validate last, sorry .

 

Thanks for checking these and your help, much appreciated .

[Martok73]

2 hours ago, Ashal said:

 

Probably has something to do with the new stats and changed timer that were added during the betas. I'm not entirely sure the final 1.63 SE build shipped with all the changes that were made to sexlabutil.dll, will have to double check.

 

Cool, will you let me know what you find please? Really would like to have my stats working again like they did prior to updating. Thanks .

[Ashal]

35 minutes ago, Martok73 said:

 

Ok, so I made a new character and here are the logs for her shortly after leaving the starting cell in LAL. I got everything setup and configured then saved and exited. I did not touch the Clean System button, wanted to let you have a look at these logs and see if they are as bad as the 300hr save file logs that is crashing on me when I Clean System in S

 

I think that's all the logs I've seen you mention looking at on here. Keep in mind while looking over these that the 300hr save file that crashed every time I touched the "Clean System" button has been running fine with 0 crashes even after updating to SL v1.63 just as long as I didn't mess with the "Clean System" button. Also Resaver does not show any errors for the 300hr save file either. Hopefully these logs will shed some light on what's going on as I didn't have the PapyrusUtilDev.log available immediately following the last crash. Did not know to look at it or link it so I have no reference for what form it was trying to validate last, sorry .

 

Thanks for checking these and your help, much appreciated .

 

 

That's skee64.log, NOT what I asked for. You need skse64.log.

 

 

Also, BOTH your papyruysutildev.log and sexlabutil.log are NOT from 1.64b, they look like older logs and not current ones from the current AE build. Which continues what I've said previously about you not having the mod installed properly. EDIT: forgot you were supposedly on 1.63 not 1.64b, so ignore. But still really need to see the skse64.log

[coldu91]

2 hours ago, Ashal said:

 

 

The log just confirms what the error message is already telling you, you are missing the dll plugin. You're either missing files from your install, your mod manager is overwriting it or only partially loading the files for whatever reason, your skse install is messed up, or your computer is blocking the dll from properly loading.

 

First step regardless should be to check the skse log to see if the plugin is loading correctly. And the SexLabUtil log as well.

 

Check these 2 logs:

Documents\My Games\Skyrim Special Edition\SKSE\skse64.log

Documents\My Games\Skyrim Special Edition\SKSE\SexLabUtil.log

 

Also check skse64_loader.log and skse64_steam_loader.log as well, just in case, but they are unlikely to say anything important.

 

 

i figured it out, the mod Fuz Ro D-oh was messing it up thanks for the help guys.

[IamGreatBoy]

6 hours ago, Sinrelm said:

 

SHIFT + PAGEUP and SHIFT + PAGEDOWN

Yeah I already knew about that, I was referring to the hotkey to change it in the animation, I know that Shift + Pageup/Pagedown also changes it in the animation, but I was referring to c and Shift + c because I thought it would save the alignment so that way I didn't need to go back into the MCM for that same animation later. SOS is Shift + Pageup/Pagedown as for the alignment hotkey which is c/shift+c is in the sexlab MCM.

Anyway thanks @OsmelMC I should've known it was Shift+c, kinda stupid of me

Edited December 3, 2021 by IamGreatBoy

[Martok73]

6 hours ago, Ashal said:

 

 

That's skee64.log, NOT what I asked for. You need skse64.log.

 

 

Also, BOTH your papyruysutildev.log and sexlabutil.log are NOT from 1.64b, they look like older logs and not current ones from the current AE build. Which continues what I've said previously about you not having the mod installed properly. EDIT: forgot you were supposedly on 1.63 not 1.64b, so ignore. But still really need to see the skse64.log

 

Sorry, grabbed the wrong file, my eyesight isn't what it used to be. Haven't played since post those logs so this one should be the right skse.log file.

skse64.log

[mouloudelevendeurdekebab]

My game says "Sexlab error: Unsupported version rollback detected. Proceed at your own risk" and it fucks up my animations too (everyone is T posing even tho i don't have any problem on FNIS.

 

I re installed the new version again but it still does the same thing

 

(not AE,i don't have that,and yes i installed the 1.63)

Edited December 3, 2021 by mouloudelevendeurdekebab

[Gledania]

There are 6 different sexlab files to download 

 

 

Wich one I'm supposed to take ???