Horny Creatures of Skyrim

[Firfot]

I was taking a look at the werewolves part of the mod, looks really good! but does this version also has issues with Moonlight tales? or just H Werewolves?

[MadMansGun]

27 minutes ago, Firfot said:

but does this version also has issues with Moonlight tales?

yes.

[Firfot]

20 hours ago, MadMansGun said:

yes.

Ahh darn! Still, thank you though!

[Feki]

Hey! Slight issue I've had so far - the "species-on-species" don't seem to be working. Whenever I try to set up a fox-on-fox animation, they'll instead play a dominant wolf pose on one while the other stands still. Pressing 0 only lets me choose those wolf animations :s Any ideas what I need to tinker with? I've installed the anims fine, the fox/chicken one plays normally when I set it up. I've done the JSON things in the creature framework. I'm lost ;w;

[MadMansGun]

35 minutes ago, Feki said:

.

update MNC and use a save editor to clean your save file.
 

Spoiler

 

More Nasty Critters v9/v10 to v11 upgrade procedure

 

1. in data delete these esp files:
SexLabNudeCreatures.esp
SexLabNudeCreaturesDG.esp
SexLabNudeCreaturesDB.esp

 

2. in data/creatures.d delete these json files:
slnc.json
slncAlt.json
slnc-db.json
slnc-dbAlt.json
slnc_dg.json
slnc_dgAlt.json

 

3. in Data\meshes\actors\skeever\behaviors delete these hkx files:
skeeverbehavior.hkx
FNIS_MNC_skeever_Behavior.hkx
FNIS_MoreNastyCritters_skeever_Behavior.hkx

 

4. in Data\Scripts delete these files:
slncAbstractAddonScript.pex
slncAddonDBScript.pex
slncAddonDGScript.pex
slncConfigMenu.pex
slncMainQuestScript.pex
slncPlayerAliasScript.pex

 

5. in Data\meshes\actors\skeever\animations delete these folders:
MNC
MoreNastyCritters

 

6. enter "MNC" in a search (that is setup to look in skyrim's meshes folder only) and delete any folders called "MNC" that you see, then rerun the same search and delete any files leftover with "MNC" in there name.

 

7. install More Nasty Critters v11 and rerun FNIS

( https://www.loverslab.com/files/file/3524-sexlab-more-nasty-critters-install-guide/ )

 

8. use a save editor to remove these scripts/script instances from your save file:
(note: not all save tools are the same and i don't know which one works best)
MoreNastyCrittersFactory
MoreNastyCrittersAlias
slncAbstractAddonScript
slncAddonDBScript
slncAddonDGScript
slncConfigMenu
slncMainQuestScript
slncPlayerAliasScript

 

9. in game go to the Creature Framework MCM and click on "Re-register all mods", then unpause the game and Wait a Minute.
note: you may need to wait a minute after the game loads before you can go to the Creature Framework MCM.

 

10. you will need to Rebuild the Animation Registry, go to the Animation Loader's MCM and then:
click on the "Disable All" button.
click on "Rebuild Animation Registry", then Wait for the message to pop up*.
click on "Reload JSON".
click on "Enable All".
click on "Count Animations" and make sure nothing is over 500, turn off some animations if they are.
click on "Register Animations", then Wait for the message to pop up*.
*if you like you can press "~" on your keyboard to open the console so you can watch it Register everything, just make sure you close it before you try to click on anything.

 

 

[Feki]

On 2/11/2019 at 3:30 AM, MadMansGun said:

update MNC and use a save editor to clean your save file.
 

  Hide contents

 

 

I already have the most up to date version of MNC, should I still try and reinstall it?

[MadMansGun]

19 minutes ago, Feki said:

I already have the most up to date version of MNC, should I still try and reinstall it?

yes

https://www.loverslab.com/files/file/4130-more-nasty-critters-slal-edition/

 

[fakelake]

Hey I'm using MNC 11.4C with HCOS 1.8B and for some reason the female werewolf mesh and textures get hijacked by "HornyWerewolves\femalebodywerewolf_1.NIF" which I found out is contained inside Horny Creatures of Skyrim in a BSA file. Closest I've gotten to fix this (or so I thought) was to change the load order for MNC to be after HCoS but that didn't last long. Any hints?

[MadMansGun]

4 hours ago, fakelake said:

Hey I'm using MNC 11.4C with HCOS 1.8B and for some reason the female werewolf mesh and textures get hijacked by "HornyWerewolves\femalebodywerewolf_1.NIF" which I found out is contained inside Horny Creatures of Skyrim in a BSA file. Closest I've gotten to fix this (or so I thought) was to change the load order for MNC to be after HCoS but that didn't last long. Any hints?

it's the same female mesh so it makes no difference (except maybe for the texture file path), i just forgot about it when i merged HWoS, HDoS and the SLAL Pack into one mod, it can be fixed by editing the armoraddons.

 

[fakelake]

5 hours ago, MadMansGun said:

it's the same female mesh so it makes no difference (except maybe for the texture file path), i just forgot about it when i merged HWoS, HDoS and the SLAL Pack into one mod, it can be fixed by editing the armoraddons.

 

I've been mixing textures and meshes from different mods so that's how I've even noticed the switching. About editing armoraddons, do I need the creation kit for that? I haven't gone that deep. Also do I remove it completely or add my textures into it?

[MadMansGun]

8 hours ago, fakelake said:

I've been mixing textures and meshes from different mods so that's how I've even noticed the switching. About editing armoraddons, do I need the creation kit for that? I haven't gone that deep. Also do I remove it completely or add my textures into it?

hell no, use TES5Edit it's much faster for doing small edits like this.

load MNC and HCOS into it (and give it time to fully finish loading) then open the "Armor Addon" section in MNC and/or HCoS and find "NakedTorsoWerewolfBeast" (it's formid is 000CDD87 ), then find the "female world model" line inside 000CDD87 and edit it as needed (the line/s will most likely be red because TES5Edit will see the mod conflict)

 

depending on what your doing you may need to edit some other "Armor Addon"s as well (also depending on what you have selected in CF):

if using one of MNC settings:

NakedTorsoWerewolfBeastHard

NakedTorsoWerewolfBeastHardLegacy

NakedTorsoWerewolfBeastSoft

NakedTorsoWerewolfBeastSoftLegacy

if using one of HCOS setting:

NakedNormalWerewolvesSoft

NakedNormalWerewolvesHard

(or any "NakedHorseWere" setting you may be using)

 

or you can just wait for me to update HCoS to use the MNC female mesh file path instead, it's a unnecessary conflict that i should fix....but i'm not sure when the next update will be.

[fakelake]

22 minutes ago, MadMansGun said:

hell no, use TES5Edit it's much faster for doing small edits like this.

load MNC and HCOS into it (and give it time to fully finish loading) then open the "Armor Addon" section in MNC and/or HCoS and find "NakedTorsoWerewolfBeast" (it's formid is 000CDD87 ), then find the "female world model" line inside 000CDD87 and edit it as needed (the line/s will most likely be red because TES5Edit will see the mod conflict)

 

depending on what your doing you may need to edit some other "Armor Addon"s as well (also depending on what you have selected in CF):

if using one of MNC settings:

NakedTorsoWerewolfBeastHard

NakedTorsoWerewolfBeastHardLegacy

 NakedTorsoWerewolfBeastSoft

NakedTorsoWerewolfBeastSoftLegacy

 if using one of HCOS setting:

NakedNormalWerewolvesSoft

NakedNormalWerewolvesHard

(or any "NakedHorseWere" setting you may be using)

 

or you can just wait for me to update HCoS to use the MNC female mesh file path instead, it's a unnecessary conflict that i should fix....but i'm not sure when the next update will be.

Man thanks for that, I installed the Creation Kit and its been giving me nothing but grief. Error after error, so I'm glad you told me I could just do it in TES5Edit, actually, I did go to TES5Edit before making this post but I did not know where to look for this field, I eventually figured that its only accessible through the CK.

 

I did want to just delete the field so that I wouldn't have to bother with dependencies but since I don't know what that would I just settled on replacing HornyWerewolves with MNC NIF directory.

 

In anycase, replacing HWWolves from NakedTorsoWerewolfBeast was not enough, I had to replace it in NakedNormalWerewolvesSoft and NakedNormalWerewolvesHard, and now it works!

 

Thanks a bunch MadMansGun, love your work!

[MadMansGun]

21 hours ago, fakelake said:

I installed the Creation Kit and its been giving me nothing but grief. Error after error,

sadly that's normal, it's a stupid piece of shit that doesn't fucking work.

it's the only game modification program on earth that needs to be modded itself before it can be used ?‍♂️

[VickyThicky420]

MCM Creature Framework is always empty, and none of the animations from the mod are ever playing, yet the title screen still works. What am I doing wrong? I’ve tried every method listed on the page for troubleshooting ?‍♂️

 

 

edit: ok so I’ve noticed that they won’t show up in the SL animation lists either, any reason for this?

[MadMansGun]

1 hour ago, VickyThicky420 said:

MCM Creature Framework is always empty, and none of the animations from the mod are ever playing, yet the title screen still works. What am I doing wrong? I’ve tried every method listed on the page for troubleshooting ?‍♂️

 

 

edit: ok so I’ve noticed that they won’t show up in the SL animation lists either, any reason for this?

you forgot to install JContainers....and maybe even SLAL.....and other things:

https://www.loverslab.com/files/file/3524-sexlab-more-nasty-critters-install-guide/

 

[VickyThicky420]

44 minutes ago, MadMansGun said:

you forgot to install JContainers....and maybe even SLAL.....and other things:

https://www.loverslab.com/files/file/3524-sexlab-more-nasty-critters-install-guide/

 

Ok, so I was using a mod manager. Probably going to switch, as it kinda sucks. Had everything there, but they wouldn’t go together, so oh well.

[MadMansGun]

Just now, VickyThicky420 said:

Ok, so I was using a mod manager. Probably going to switch, as it kinda sucks. Had everything there, but they wouldn’t go together, so oh well.

mod organizer / mod organizer 2 is the most commonly used mod manager around here.

[VickyThicky420]

6 hours ago, MadMansGun said:

mod organizer / mod organizer 2 is the most commonly used mod manager around here.

Ok, so I fixed everything. Well, I shouldn’t say that... one thing’s broken. Whenever I try to start an animation it fails. I was wondering why, so I checked the logs and it says that it’s failing because “playing is already in an animation.” I’m not, but the game thinks I am? I’ve tried GenerateFNIS, no luck. ?‍♂️

[MadMansGun]

5 hours ago, VickyThicky420 said:

Ok, so I fixed everything. Well, I shouldn’t say that... one thing’s broken. Whenever I try to start an animation it fails. I was wondering why, so I checked the logs and it says that it’s failing because “playing is already in an animation.” I’m not, but the game thinks I am? I’ve tried GenerateFNIS, no luck. ?‍♂️

well that's a new one....go to the SexLab MCM and find the debugging settings, then click on the one that stops all animations (i can't remember the exact wording)

if that fails then try using the setting that resets/reinstalls SexLab to it's default state.

[VickyThicky420]

6 hours ago, MadMansGun said:

well that's a new one....go to the SexLab MCM and find the debugging settings, then click on the one that stops all animations (i can't remember the exact wording)

if that fails then try using the setting that resets/reinstalls SexLab to it's default state.

Ok so I’ve done both and neither worked, I have it open right now so I can tell you that it says

”Notice: ValidateActor(Player) — False — They appears to already be animating”

 

does this mean anything? 

[VickyThicky420]

31 minutes ago, VickyThicky420 said:

Ok so I’ve done both and neither worked, I have it open right now so I can tell you that it says

”Notice: ValidateActor(Player) — False — They appears to already be animating”

 

does this mean anything? 

Ok, I fixed it. For anyone in the future who has the same problem as me, hit the “Clean systems” button and wait for it to reset. Thanks for the help! I didn’t even know that menu existed before then. Have a great day!

[DIO over Za Warudo]

I don't suppose that there are any videos on this thread or the development thread that show the animations in action are there? Images are good and all, but sometimes a video demonstration is best. 

 

I'd say I'm asking for research purposes, but this is Loverslab after all, so...

[MadMansGun]

11 hours ago, Aizen525 said:

I don't suppose that there are any videos on this thread or the development thread that show the animations in action are there? Images are good and all, but sometimes a video demonstration is best. 

 

I'd say I'm asking for research purposes, but this is Loverslab after all, so...

there may be a few hidden in the development thread somewhere, and they sometimes show up on naughtymachinima.

the commonly used recording programs don't work on my computer so i can't make videos, the best i can do is press the "print screen" key a lot to make a crappy gif...it's not worth the effort.

[Salrenx182]

Will the SL_DragonsV1 work fully ? Cuz I haven’t run into (par thr  naxx) yet and I’m wondering if it will work and not show as an error sign, also I have the mods correct and no other mods overwrites this and causes the error sign          Edit1: I meant as the error hasn’t appeared yet so everything’s gud >:3

[freakga]

I would like to have this but every time I try to download the file I get Failed Network error at about 31%. Even when I tried to use my Verizon data. Is there a mirror site I could get it from?