Nergui Posted October 16, 2016 Posted October 16, 2016 When is the best time to use the "Complete Expansion" option in MCM. As in, before or after exiting the start area form LAL?
Veladarius Posted October 16, 2016 Author Posted October 16, 2016 I came across a missing texture. Im certain which collar it is but i have my preferences set to black metal. I did a search and found a few references to missing textures on padded collars but these also mentioned that the textures are shared with other items. I haven't noticed any problems with other items yet. I tried overwriting the textures folder again with those from an unpacked 4.05 but that didn't fix it. Any suggestions please? It looks like it is missing the texture for the black shop collar, it was not included for some reason nor set correctly in the CK.
Veladarius Posted October 16, 2016 Author Posted October 16, 2016 @Veladarius - When things are stable and you are adding new content. Are there anything which isn't a quest but deserves XP (experience points)? Are there any among your fans who prefer the XP System and/or levelling methodology of Oblivion? If so I have recently found a modification which allows you to award XP more effectively and have a levelling system more like Oblivion's while running Skyrim. Meet SXP Redone - Skyrim Experience Mod (http://www.nexusmods.com/skyrim/mods/76215/) it supports it being sent XP increase requests by mod event. I will look at it and consider adding support for it since it works on Mod Events and would not be a requirement for everyone. When is the best time to use the "Complete Expansion" option in MCM. As in, before or after exiting the start area form LAL? Either, it won't affect it either way. The only time you should not have it complete via the MCM is if construction has started on its own.
Guest Long John Posted October 16, 2016 Posted October 16, 2016 @Veladarius - In response to the post by Nergui who stated: When is the best time to use the "Complete Expansion" option in MCM. As in, before or after exiting the start area form LAL? How about having it so that when the construction starts on its own the button is either disabled or a warning is displayed so people don't trigger it accidentally.
Veladarius Posted October 16, 2016 Author Posted October 16, 2016 @Veladarius - In response to the post by Nergui who stated: When is the best time to use the "Complete Expansion" option in MCM. As in, before or after exiting the start area form LAL? How about having it so that when the construction starts on its own the button is either disabled or a warning is displayed so people don't trigger it accidentally. Actually it already does.
Nergui Posted October 16, 2016 Posted October 16, 2016 I found something weird in the Devices MCM options that interacts with the slavery start. The colour of the collar and belt that are equipped seems to be determined by the leather colour preference. If black is selected for both metal and leather, the missing texture error Teddar mentioned occurs. However, if you set any other colour for metal finish and black leather, the texture is appied normally.
PawnMan Posted October 16, 2016 Posted October 16, 2016 I am not sure if someone has had this problem yet. Everything worked fine for a while. but when i got more submissive and went to ask to purchase something she would say "Hold on a moment" and then dialogue will end. It keeps happening Now when she asks to talk more for me to become a relationship slave at the end of her first line the dialog ends and keeps ending every time.
Veladarius Posted October 16, 2016 Author Posted October 16, 2016 I am not sure if someone has had this problem yet. Everything worked fine for a while. but when i got more submissive and went to ask to purchase something she would say "Hold on a moment" and then dialogue will end. It keeps happening This is likely Confiscation having an issue. Now when she asks to talk more for me to become a relationship slave at the end of her first line the dialog ends and keeps ending every time. Likely a condition issue in the dialogue, I will check on it.
PawnMan Posted October 16, 2016 Posted October 16, 2016 Also, i just chose to try the property slave part. The hay pile is listed as owned and the food barrel i can only steal from I also wasn't given a pickax to mine the ores. I used the console to give me one and when i did mine the ores the amount for the quota did not go down. (EDIT) never mind on the quota going down, all of the barrels are listed as STEAL but after i put it in the one next to ramp it went down the following day. Thanks for the quick response and the very awesome mod. You have put a lot of time and work into it.
Qbeez999 Posted October 16, 2016 Posted October 16, 2016 Can anyone post the main file here for me as the download keeps failing for me. Please.
Krazzle Posted October 16, 2016 Posted October 16, 2016 Hey, I'm Currently getting stuck as a Manor Slave when given the VIP Task. I Go into the VIP house and talk with Delius who then walks upstairs.. I complete the shower scene with no problems and return to her. she goes into the VIPS room.. when I walk in she Force greets my character with "Make sure the guest has a pleasurable experience".. My only two options in reply to this are both "..." Though.. 1: Says "You work for markus correct? I suggest you return to the manor and perform your duties" and then ends the conversation 2: Repeats the line "Make sure the guest has a pleasurable experience" The guest dosn't interact with me when i try to talk to him. After ending the scene with the MCM option and returning to the manor Markus just says the task isn't finished.. Any ideas? Oddly this plays through fine when not a ManorSlave though.. (although i get the scene freezing when whipping.. the guest whips once and then sheaths the whip and dosnt do anything else) The odd thing is that there is no difference in the startup at all. Check the aliases on the following: SQV CDxCustomerAssist02_main and make sure that Customer A and B are set (A should be you) SQV CDxSceneSet_VIPHouse and make sure Master and Slave_Primary are set (one of these should be you) They should be set up when the VIP first arrives. There is the problem.. "SQV CDxSceneSet_VIPHouse", Master and Slave_Primary are set to NONE.. How do I fix this? I'm unsure how to edit the quest variables. Thanks for your help! You can't, these are set up when the guests arrive and should not clear until they leave. Use sqv CDxGuestControl and check the variable for VIP_Room2 and tell me the value please. It should give me an idea if it is an issue with setting them in the first place or if the system has started their 'check out' process. Hey The Value for VIP_Room2 = 1
Black714 Posted October 16, 2016 Posted October 16, 2016 Here My Papyrus Log... The Devious Device Re Equipped Twice, Please Some Help... Papyrus.0.rar
darkfender666 Posted October 16, 2016 Posted October 16, 2016 Started a new game... After 4 days (set to 3) the delivery work doesn t reappears Despite being lvl 10 i don t get any of the old quest/event (thalmor embassy, falkreath jarl and so on) (they are all checked in MCM) Also in the relationship save despite i ended it the collar shocks me if i leave the area but maybe this is not a bug and it needs the new part to be released.
UnEvenSteven Posted October 16, 2016 Posted October 16, 2016 Everything worked fine for a while. but when i got more submissive and went to ask to purchase something she would say "Hold on a moment" and then dialogue will end. It keeps happening This is likely Confiscation having an issue. Been having similar issues with Confiscation as PawnMan, Master only says "Hold on a moment" then the dialogue closes. This is on a fresh new game with 4.07. When a Confiscation event first happened I got the "Hold on a moment-dialogue exit" issue, after a few more tries it eventually got past that but got stuck in the <May repeat> loop until I just exited dialogue manually. After that I would only get the "Hold on a moment-dialogue exit" issue. I tried using the setstage cdxconfiscation 500 command here and there but that never seemed to work.. I eventually turned off Confiscation in the MCM and tried the above console command again, even exiting and re-entering the shop but still had no effect. I attached a recent Papyrus log, edited to only show Captured Dream entries. Papyrus.txt
Veladarius Posted October 16, 2016 Author Posted October 16, 2016 Also, i just chose to try the property slave part. The hay pile is listed as owned and the food barrel i can only steal from I also wasn't given a pickax to mine the ores. I used the console to give me one and when i did mine the ores the amount for the quota did not go down. (EDIT) never mind on the quota going down, all of the barrels are listed as STEAL but after i put it in the one next to ramp it went down the following day. Thanks for the quick response and the very awesome mod. You have put a lot of time and work into it. Restart it, the slave start did not begin properly. If it does it again upload a log for me. Hey, I'm Currently getting stuck as a Manor Slave when given the VIP Task. I Go into the VIP house and talk with Delius who then walks upstairs.. I complete the shower scene with no problems and return to her. she goes into the VIPS room.. when I walk in she Force greets my character with "Make sure the guest has a pleasurable experience".. My only two options in reply to this are both "..." Though.. 1: Says "You work for markus correct? I suggest you return to the manor and perform your duties" and then ends the conversation 2: Repeats the line "Make sure the guest has a pleasurable experience" The guest dosn't interact with me when i try to talk to him. After ending the scene with the MCM option and returning to the manor Markus just says the task isn't finished.. Any ideas? Oddly this plays through fine when not a ManorSlave though.. (although i get the scene freezing when whipping.. the guest whips once and then sheaths the whip and dosnt do anything else) The odd thing is that there is no difference in the startup at all. Check the aliases on the following: SQV CDxCustomerAssist02_main and make sure that Customer A and B are set (A should be you) SQV CDxSceneSet_VIPHouse and make sure Master and Slave_Primary are set (one of these should be you) They should be set up when the VIP first arrives. There is the problem.. "SQV CDxSceneSet_VIPHouse", Master and Slave_Primary are set to NONE.. How do I fix this? I'm unsure how to edit the quest variables. Thanks for your help! You can't, these are set up when the guests arrive and should not clear until they leave. Use sqv CDxGuestControl and check the variable for VIP_Room2 and tell me the value please. It should give me an idea if it is an issue with setting them in the first place or if the system has started their 'check out' process. Hey The Value for VIP_Room2 = 1 That means it still considers the room to be occupied. I will have to see about putting in a reset of some sort for this issue.
Veladarius Posted October 16, 2016 Author Posted October 16, 2016 Started a new game... After 4 days (set to 3) the delivery work doesn t reappears Despite being lvl 10 i don t get any of the old quest/event (thalmor embassy, falkreath jarl and so on) (they are all checked in MCM) Also in the relationship save despite i ended it the collar shocks me if i leave the area but maybe this is not a bug and it needs the new part to be released. Use sqv cdxtaskmanager and look at the variable Timer_PkgDelivery This will be the number of days left before it is available. If it is not moving there is a reset for the Task Manager in the MCM menu with the quest resets that will restart the timer. If the collar shocked you then I am guessing you went through property slave, the 'invisible fence' that triggers it should have been disabled when it transitioned over so it may not have finished the transition from one to the other completely. Everything worked fine for a while. but when i got more submissive and went to ask to purchase something she would say "Hold on a moment" and then dialogue will end. It keeps happening This is likely Confiscation having an issue. Been having similar issues with Confiscation as PawnMan, Master only says "Hold on a moment" then the dialogue closes. This is on a fresh new game with 4.07. When a Confiscation event first happened I got the "Hold on a moment-dialogue exit" issue, after a few more tries it eventually got past that but got stuck in the <May repeat> loop until I just exited dialogue manually. After that I would only get the "Hold on a moment-dialogue exit" issue. I tried using the setstage cdxconfiscation 500 command here and there but that never seemed to work.. I eventually turned off Confiscation in the MCM and tried the above console command again, even exiting and re-entering the shop but still had no effect. I attached a recent Papyrus log, edited to only show Captured Dream entries. Upload the entire log, nothing in this one is useful.
AngusYung Posted October 16, 2016 Posted October 16, 2016 For the free trial, I'm getting stuck in the dialogue after she equips the belt and vag plug. She puts them on and says they look good; I get the chastity belt quest notification; then she just stands there and I can't break out. Is there a way to push this forward or should I avoid it?
Veladarius Posted October 16, 2016 Author Posted October 16, 2016 For the free trial, I'm getting stuck in the dialogue after she equips the belt and vag plug. She puts them on and says they look good; I get the chastity belt quest notification; then she just stands there and I can't break out. Is there a way to push this forward or should I avoid it? setstage cdxfreetrial 75 will get to the next stage. I have the issue fixed in the next release.
bicobus Posted October 16, 2016 Posted October 16, 2016 I'm not sure if it is intended: as a property slave at the stage of the mines, once we get the mission to fetch a package from a smithy, that smithy will fit plugs on the player. While the player is wearing a belt, I feel this shouldn't happen. More so, once we return to the Overseer, the plugs aren't removed. I also experienced the raccan forcegreet issue, but he went outside and stopped bothering me. Before that, the overseer opened the cage and told me raccan would come, once raccan came, I was put back in the locked cage and told to follow raccan which wasn't possible. I did a player.moveto <raccan id> to fix that issue. Another trival problem I noticed: the different missions given while mining provides to player with items that are not removed from the inventory. For example, I am to fetch ingots in exchange of ore to an orc the other side of the map. Yet, when I come back the ingots remain in my inventory. Same thing with the items equipped by the smithy for the second mission.
Ratinira Posted October 16, 2016 Posted October 16, 2016 Can anyone post the main file here, please, because I can only download a 4.7 version, not 4.5.
UnEvenSteven Posted October 16, 2016 Posted October 16, 2016 Upload the entire log, nothing in this one is useful. Very well and thanks. Papyrus.0.log
newuser42 Posted October 16, 2016 Posted October 16, 2016 Hello Veladarius Re: Erani quest Resetting the Main framework of Slave Erani, solved the problem of having a null reference for the player it showed up as soon as i typed sqv cdxdiaerani however, its still stage 10, Will the quest reset back to where the courier comes in and hands the letter? Thank you
Veladarius Posted October 16, 2016 Author Posted October 16, 2016 Upload the entire log, nothing in this one is useful. Very well and thanks. There are no errors, it is either it is not getting to the end of the cycle or there is a conflict with a variable set at some point. Use both setstage to 100 and shut down confiscation. This will reset the timer and the quest but it will remove any unused items it found. Can anyone post the main file here, please, because I can only download a 4.7 version, not 4.5. File removed If it doesn't work then I suggest trying a different browser.
Veladarius Posted October 16, 2016 Author Posted October 16, 2016 Hello Veladarius Re: Erani quest Resetting the Main framework of Slave Erani, solved the problem of having a null reference for the player it showed up as soon as i typed sqv cdxdiaerani however, its still stage 10, Will the quest reset back to where the courier comes in and hands the letter? Thank you Set the stage to 900, it will reset the quest and set the stage to 0. The CdxDiaErani quest only handles her dialogue and actions once she has been assigned to you and not the quest to go get her.
newuser42 Posted October 16, 2016 Posted October 16, 2016 Here's a possible workaround, albeit clumsy For the issue of having no ref for the erani quest and retain Erani's slave functionality 1.) complete the quest, to fetch a slave, this will render player ref to null, breaking the quest --> bug with mods, 2.) on MCM, reset Erani main quest, her controller will be reset, but it fills up player ref to 00000014 3.) Wait for a while and on MCM, reset Erani's alias so that it populates Erani's alias on quest parameters 4.) go to the console, type setpqv cdxdiaerani Assignedplayer_var 1 --> which will enable the "Erani" dialogue menu 5.) Move Erani to player under MCM slave options You now have the ability to set Erani's assignment, restraint options and wait pose options her sandboxing and following functions Works even with save/load But the option to return her to the manor cannot be completed now, as the dialogue options for the Master is gone My captured dreams version is 4.05 Hello Veladarius Thanks for the reply, I did the setpqvar to force feed the quest and get Erani. Did research on this. But I completed the quest fair and square, had to complete 10 delivery quest to get the courier going PS: I don't have scripting experience whatsoever, I'm a gamer, not a modder, so it took some time to figure it out
Recommended Posts