Devious Devices - Captured Dreams Shop v4.15 - files removed

[trasberny]

I think I have fixes in for most all the issues other than the belt equip delays / freezes, I am looking to rebuild the script that handles that. Otherwise I hope to have something out tomorrow if all goes well.

 

Vel working hard! I remember you mentioned that CD is somewhat compatible with DDi 3.1 now, was just wondering if its ok to use it for when you release a new update?

[darktej]

hi Vel,thank you and the guys here for the constant support. Installed the new version 4.04 from 4.03. Installed without too much of a trouble. But the MCM menu for Captured dreams is blank. Tried the method of deleting the cdxmcmmenu in the script folder. Now there is no Captured dreams in the mcm. Thanks.

[Guest Flobalob]

 

 

I also have this problem. Installed using NMM.

 

And me. I installed using NMM also.

Have you two followed the instructions from the message that came with the installer?

 

 

​What is going on with this MCM, obviously we shouldn't have to install a 4.02 fix over a 4.04 fix?

You reverted the localized MCM to the unlocalized.

And it's usually not safe to use older scripts with newer mod versions or vice versa.

 

Yes, I am reinstalling as I write to see if I have missed an instruction or something. I will post back with the result.

 

Update: Uninstalling 4.04 with NMM (v61.23) takes too long and it froze in the middle of it, had to manual uninstall. It was quicker too.

[CGi]

Update: Uninstalling 4.04 with NMM (v61.23) takes too long and it froze in the middle of it, had to manual uninstall. It was quicker too.

Uninstalling took to long? What? NMM should only remove the symbolic links, delete the mods files and then recreate those links for files CDS replaced.

Are you sure you don't have a more general problem? Like with UAC, damaged FS or such?

[asdasd123123]

Hey I have an issue with Property Slave questline.

 

At the beginning, once you're enslaved by Simple Slavery, then sent from the boat to the mines. The master will have a bit of dialog, equip you with some devices, the walk away leaving u on the XCROSS. You cannot move from the xcross. Is that normal? 

[Krynn]

Hey I have an issue with Property Slave questline.

 

At the beginning, once you're enslaved by Simple Slavery, then sent from the boat to the mines. The master will have a bit of dialog, equip you with some devices, the walk away leaving u on the XCROSS. You cannot move from the xcross. Is that normal? 

 

No, i never had this at my 199 new games..

 

You dont need Simple Slavery for CD.

 

Are You sure you have Sexlab installed in the MCM Menu and Zaz Registrated in the MCM?

[Guest Flobalob]

 

Update: Uninstalling 4.04 with NMM (v61.23) takes too long and it froze in the middle of it, had to manual uninstall. It was quicker too.

Uninstalling took to long? What? NMM should only remove the symbolic links, delete the mods files and then recreate those links for files CDS replaced.

Are you sure you don't have a more general problem? Like with UAC, damaged FS or such?

 

 

Thanks for your interest but I have no clue why. I am used to manual installs anyway because I have been doing it since Morrowind

and I know where everything goes.

 

[Krynn]

Ich habe es auch Manuell installiert.. außer meinen bereits bestehenden Problemen habe ich da keinerlei neue zumindest...

[Veladarius]

plz tell me you'll be adding something to make the sweeping quests faster or shorter cause apart from that the rest is fantastic but having to spend an entire night just to clear 30 points and clear the quest?

I need sleep!

T_T

 

Change the difficulty level to Light, it sets the target lower and gives markers for all of the piles.

[CGi]

Thanks for your interest but I have no clue why. I am used to manual installs anyway because I have been doing it since Morrowind

and I know where everything goes.

Any install method is fine with me, as long as the user knows what she/he is doing, because else we might be confronted with errors that are hard to identify.

i went fully manual with Morrowind, switched to Wrye and then to OBMM for Oblivion, used FOMM for FO3 to FO:NV and am now using MO for everything except FO4 (not useable for me yet, so it's NMM for now) and Morrowind (still fully manual).

[Veladarius]

Is there a way to change or reset your starting tendencies after they lock?  I have not been to the shop yet, but they are already locked at the default 4's.

 

They are stored as faction ranks, use help cdxtend and it will bring up the list of them. Use setfactionrank to change them.

[Delzaron]

Just a little problem : during the customer quest, with player as slave role, the guest pick the manacles... and put it on himself... so, it blocked the character (specially a begin of whiping scene). Event the debug command doesn't solve the glitch.

 

 

[Veladarius]

 

I think I have fixes in for most all the issues other than the belt equip delays / freezes, I am looking to rebuild the script that handles that. Otherwise I hope to have something out tomorrow if all goes well.

 

Vel working hard! I remember you mentioned that CD is somewhat compatible with DDi 3.1 now, was just wondering if its ok to use it for when you release a new update?

 

 

Yes. The issue is an AI Override used in DDi on npc's using armbinders and yokes that causes issues when exiting scenes. I have a work around for it  that is rather heavy handed and isn't really recommended by Min to use but it is used in only 2-3 spots on 1 npc who doesn't do much after that. I will use it until they figure out a better solution so people can upgrade DDi and bot have to worry about compatibility. I have confirmed that it works on DDi 3.1 so things are back on track.

hi Vel,thank you and the guys here for the constant support. Installed the new version 4.04 from 4.03. Installed without too much of a trouble. But the MCM menu for Captured dreams is blank. Tried the method of deleting the cdxmcmmenu in the script folder. Now there is no Captured dreams in the mcm. Thanks.

 

The script to delete was CDxMCM not CDxMCMMenu. I believe CDxMCM was for the translation that had issues where CDxMCMMenu was the actual menu itself.

[CGi]

The script to delete was CDxMCM not CDxMCMMenu. I believe CDxMCM was for the translation that had issues where CDxMCMMenu was the actual menu itself.

The translation is embedded into the CDxMCMMenu script so there is no CDxMCM script.

But deleting the MCMMenu script is only causing the loss of a few variables so users have to setup most things again. Else it's non-critical and can be safely removed.

i tested it on my main save and on a new save. Works fine ... for me, because upon game load MCM registered the menu again.

 

And i changed the message in the installer accordingly.

[darktej]

 

 

I think I have fixes in for most all the issues other than the belt equip delays / freezes, I am looking to rebuild the script that handles that. Otherwise I hope to have something out tomorrow if all goes well.

 

Vel working hard! I remember you mentioned that CD is somewhat compatible with DDi 3.1 now, was just wondering if its ok to use it for when you release a new update?

 

 

Yes. The issue is an AI Override used in DDi on npc's using armbinders and yokes that causes issues when exiting scenes. I have a work around for it  that is rather heavy handed and isn't really recommended by Min to use but it is used in only 2-3 spots on 1 npc who doesn't do much after that. I will use it until they figure out a better solution so people can upgrade DDi and bot have to worry about compatibility. I have confirmed that it works on DDi 3.1 so things are back on track.

hi Vel,thank you and the guys here for the constant support. Installed the new version 4.04 from 4.03. Installed without too much of a trouble. But the MCM menu for Captured dreams is blank. Tried the method of deleting the cdxmcmmenu in the script folder. Now there is no Captured dreams in the mcm. Thanks.

 

The script to delete was CDxMCM not CDxMCMMenu. I believe CDxMCM was for the translation that had issues where CDxMCMMenu was the actual menu itself.

 

Oh ok, that makes sense. But tried searching for the CDxMCM,couldn't find it. I guess I will have to start a new game. Thanks again

[Krynn]

Also DeviousDevices-Integration-3.1.7z installieren? weil in den vorherigen Versionen entfernte der Meister jetzt immer das Corsett richtig, ab der neuen macht sie das wieder nicht.

 

------------------

 

So install DeviousDevices integration 3.1.7z ? because in the previous versions of the master remote now always the corset properly from the new it does not do that again.

[Veladarius]

Just a little problem : during the customer quest, with player as slave role, the guest pick the manacles... and put it on himself... so, it blocked the character (specially a begin of whiping scene). Event the debug command doesn't solve the glitch.

 

Use SQV CDxSceneSet_VIPHouse and tell me if the player is in the Alias of Slave_Primary (000014) and the npc is in the Master or if they are switched. Also, was this the first scene of the session?

Also DeviousDevices-Integration-3.1.7z installieren? weil in den vorherigen Versionen entfernte der Meister jetzt immer das Corsett richtig, ab der neuen macht sie das wieder nicht.

 

------------------

 

So install DeviousDevices integration 3.1.7z ? because in the previous versions of the master remote now always the corset properly from the new it does not do that again.

 

I didn't change the equip scripts yet and as far as I know there were no changes to the corsets so I am not sure why there would be an issue.

 

Hey I have an issue with Property Slave questline.

 

At the beginning, once you're enslaved by Simple Slavery, then sent from the boat to the mines. The master will have a bit of dialog, equip you with some devices, the walk away leaving u on the XCROSS. You cannot move from the xcross. Is that normal? 

 

No, i never had this at my 199 new games..

 

You dont need Simple Slavery for CD.

 

Are You sure you have Sexlab installed in the MCM Menu and Zaz Registrated in the MCM?

 

 

Master should start some dialogue with you then the Overseer will take over and Master and Herran will leave at that point. Once the Overseer is done you would be set loose.

[Krynn]

Also DeviousDevices-Integration-3.1.7z installieren? weil in den vorherigen Versionen entfernte der Meister jetzt immer das Corsett richtig, ab der neuen macht sie das wieder nicht.

 

------------------

 

So install DeviousDevices integration 3.1.7z ? because in the previous versions of the master remote now always the corset properly from the new it does not do that again.

 

I didn't change the equip scripts yet and as far as I know there were no changes to the corsets so I am not sure why there would be an issue.

 

I have also no idea why, but now the Corset dont will removed, like V 4.0

 

At the next Versions, it will be removed correctly.

 

I am using DDi 3.1beta

 

I think i will downgrade to 4.2 and try it.

 

 

Edit: ok, das Corsett wird jetzt auch nicht entfernt, ich bin hergegangen und habe beinhart Version 4.2r Manuell drüber installiert...

 

Dafür kann ich jetzt aber wieder die Liefer-Quest annehmen, ohne das der Meister zu mir sagt, ich habe ein Problem mit dem Gürtel.. das klappt jetzt wieder einwandfrei!

 

Edit2: ich versuche es nun mal mit 4.3

 

Edit3: wenn ich 4.3 installiere, dann sagt sie zu mir, es gibt ein Problem mit dem Gürtel, wenn ich eine Lieferung austragen möchte.

 

So, das war mein Resume^^

 

Edit 4: !!!!!! Noch nicht ganz:

 

wieder zurück auf 4.2r: Ich kann die Liefer-Quest vom Meister wieder ganz normal annehmen, sie sagt zu mir, da ich schon einen Gürtel von Ihr trage macht es das Ganze einfacher usw.. also hier klappt bei mir alles..

 

das Corsett wurde mir in der Version 4.4 angezogen, vielleicht liegt es auch daran, dass es nicht entfernt wird.. keine Ahnung... ich habe jetzt wie gesagt nicht nochmal ein neues Spiel angefangen, sondern einfach nur ALLES Manuell überschrieben!

 

 

Liebe Grüße!

Krynn

 

 

 

PS: Sorry, it's in German, but I have now times the German version and I can in another language not translate differently., but i think Vel and CGi know what i mean with that.. i hope so...^^ ... NO.. I 'm sure!!!

[dsfargeg222]

I give up.

 

Even on a fresh minimal install, new game, Tavish won't work, the mine foreman doesn't get a whip equipped and stands there with his fists raised until you console one into his inventory. The player didn't get a pickaxe when sent for punishment and so on. Customer assist 2 will randomly have the customer wander off after having ordered food, will randomly get stuck and not finish the scene and will bind the customer when he attempts to bind you.

 

This is with 4.04 fixed, minimal load order from a fresh install, all correct versions.

 

Looks like no matter what I do, I manage to break it somehow

[zabibi]

Having a hard time increasing the tendencies to initiate the quests, any advice? It never seems to budge from 4 even though my sub/dom tendencies and relationship with the Master changes.

[Inquisitor227]

 

EDIT: I see you mentioned fixing the force-greet issue for the next release. Does that mean specifically for De'zra or for all instances it might occur? If the latter, then that takes care of my issues too (aside from the Protector Plus belt in the free trial).

That was specifically for De'Zra.

 

I keep running into issues with dialog repeating. In my most recent play session, I tried doing the Windhelm quest, and things went fine right up until the end. But then after Master gives Erani to me, Erani wouldn't move, and just repeatedly force-greeted with "please take me to your home". Tried multiple times with the same result, and couldn't find any way to get her unstuck.

It looks like the dialogue was not ending and just looping for some reason. I have made a change to how it works so hopefully it will complete properly.

 

So I reloaded an earlier save and tried the Solitude quest. At the end of the second session, Elisif kept repeating her force-greet about how intense it was. Tried that a couple times with no luck. I quit after that.

Added a scene to Elisif after the scene is done to 'reset' her, should hopefully help.

 

In another play session, I was made a manor slave, and after the initial orientation, the guy just stayed in my room introducing himself repeatedly. No apparent way to advance.

Did the same as with Elisif.

 

 

Glad to hear these are getting fixed, I'm really looking forward to seeing what's beyond those points.

 

I played a bit more today and ran into this issue with Raccan as well, during property slave. After being promoted to working in the smithy, he kept repeating his introduction to the sleeping quarters.

 

[GretaVonHochfels]

Just curious: How many days do you serve as a mine slave? I am there since 5 day. Is that normal?

[overlordsupreme33]

hello i have a little bug when i have the customer assist 01 i think the scene didn't launch, i uptade my zaz animation to 6.11 but still doesn't launch at all if you can help me thank you ^^

 

[Veladarius]

I give up.

 

Even on a fresh minimal install, new game, Tavish won't work, the mine foreman doesn't get a whip equipped and stands there with his fists raised until you console one into his inventory. The player didn't get a pickaxe when sent for punishment and so on. Customer assist 2 will randomly have the customer wander off after having ordered food, will randomly get stuck and not finish the scene and will bind the customer when he attempts to bind you.

 

This is with 4.04 fixed, minimal load order from a fresh install, all correct versions.

 

Looks like no matter what I do, I manage to break it somehow

 

Start posting logs when you have issues so I can see what is happening, other than Customer Assist 01 it all works fine for me.

 

As for Customer Assist 01 with Tavish I have no idea why the scene won't start, it refuses to even using the console and the scene was an original scene so there should have been no issues with it. I have heard that some people have had it work but it doesn't for most people, at this point I have spent 2 days trying to figure out the issue with no luck. I am likely to leave it and hold off on doing anything until I rebuild it.

Having a hard time increasing the tendencies to initiate the quests, any advice? It never seems to budge from 4 even though my sub/dom tendencies and relationship with the Master changes.

 

Those are not set to change at this point once set in the menu. You can change them via the console, use help CDxTend  to get a list of them, they should range from 1 - 7.

 

 

EDIT: I see you mentioned fixing the force-greet issue for the next release. Does that mean specifically for De'zra or for all instances it might occur? If the latter, then that takes care of my issues too (aside from the Protector Plus belt in the free trial).

That was specifically for De'Zra.

 

I keep running into issues with dialog repeating. In my most recent play session, I tried doing the Windhelm quest, and things went fine right up until the end. But then after Master gives Erani to me, Erani wouldn't move, and just repeatedly force-greeted with "please take me to your home". Tried multiple times with the same result, and couldn't find any way to get her unstuck.

It looks like the dialogue was not ending and just looping for some reason. I have made a change to how it works so hopefully it will complete properly.

 

So I reloaded an earlier save and tried the Solitude quest. At the end of the second session, Elisif kept repeating her force-greet about how intense it was. Tried that a couple times with no luck. I quit after that.

Added a scene to Elisif after the scene is done to 'reset' her, should hopefully help.

 

In another play session, I was made a manor slave, and after the initial orientation, the guy just stayed in my room introducing himself repeatedly. No apparent way to advance.

Did the same as with Elisif.

 

 

Glad to hear these are getting fixed, I'm really looking forward to seeing what's beyond those points.

 

I played a bit more today and ran into this issue with Raccan as well, during property slave. After being promoted to working in the smithy, he kept repeating his introduction to the sleeping quarters.

 

 

 

His should not have an issue at this point, I already made changes to it.

Just curious: How many days do you serve as a mine slave? I am there since 5 day. Is that normal?

 

During Property Slave? You rise in level by getting 1 day ahead in your quota overall. If you have been there for 5 days you need to have mined 6 days worth of ore. There is no time limit on property slave, if you never hit the amounts to rise or drop in rank it will go on indefinitely.

 

If it is from a punishment you just have to mine the quota amount.

hello i have a little bug when i have the customer assist 01 i think the scene didn't launch, i uptade my zaz animation to 6.11 but still doesn't launch at all if you can help me thank you ^^

 

The quest is having issues, I suggest disabling it until either I find out what is going on and can fix it or it is rebuilt.

[Razivia]

Your mod is great and one of the best questmods on LL but also pretty huge and complex.

Have you ever thought about making a Text-Guide with console commands quest stages and so on ? 
It would avoid all the questions about quests and you could focus more on other stuff like troubleshooting etc ...

Danke für die Mühe