Being a Cow (Alternate Version)

[Mig08]

38 minutes ago, kvsunfire said:

The main MCM is blank, the Mootations one works though

First type in the console

setstage ski_configmanagerinstance 1         -  re-registration of all MCM menus

[FusRoDah2]

9 hours ago, botticelli said:

Do stopquest bac__quest_evil_006_ritualcow in the console. then sqv bac__quest_evil_006_ritualcow and make sure the aliases point to NONE. If not, try resetquest bac__quest_evil_006_ritualcow. I forgot to check for quest stage and it seems the aliases are populated just so even if that quest is not yet started.

 

Stopping the quest doesn't seem to help. Interestingly, the Aliases were all already NONE before  stopping the quest as well.

Disabling bac.esp does help though, so there's some kind of bug causing this to happen outside of bac__quest_evil_006_ritualcow.

 

EDIT: I see there's a new patch out, I'll try that one

EDIT 2: Yep, latest version fixes it.

 

Edited April 28, 2022 by FusRoDah2

[fred200]

3 hours ago, botticelli said:

I only do the LE version. You'll either have to wait until somebody converts it or do it yourself.

 

The main incompatibility with SE is the LE BSA.

If you just don't pack it in the BSA - life gets much easier.

[fred200]

On SE, both MCM menus work fine.

The BAC MCM menu is very slow to open. Give it a couple of minutes.

 

I don't think the SEQ file is working. I have to save and reload to get Paul's first dialogue.

 

[venomr]

So I was fooling around and managed to turn the Udder Mesh by Addywil into a separate armor mod. I added a 4th udder size that's bigger than all the others and also made some object meshes so you can drop it on the ground. Then I added some custom sliders so that I could use it with the "milk mod morph editor." 

 

The Morph editor basically lets you input any bodyslide slider names you want and then MME will trigger those sliders whenever the event happens. (for example, setting up various butt and legs sliders  so that as milk accumulates , it will  seem like you store it in your lower body instead of your chest.)

 

I made some custom sliders and now the udder can grow along with my breasts for the full Hucow experience.

 

 

 

I'll leave the file here. Its esl flagged so wont take up any space. I think the textures will overwrite the BAC textures since I just copied the files over, but its harmless. 

 

Should be stand alone and work without the being a cow mod. I included the custom sliders in a separate file so people can add them to the official BAC udder if they want, and some instructions on how to do it for anyone not familiar with outfit studio. I plan to redo the sliders later since I discovered an issue after some testing, but I'm uploading the mod now since it's in a working state.

 

I made it for SKyrim SE, CBBE 3BA. 

 

bac udder solo 0.3.rar

 

Edited April 28, 2022 by venomr

[LinksSword]

7 minutes ago, venomr said:

So I was fooling around and managed to turn the Udder Mesh by Addywil into a separate armor mod. I added a 4th udder size that's bigger than all the others and also made some object meshes so you can drop it on the ground. Then I added some custom sliders so that I could use it with the "milk mod morph editor." 

 

The Morph editor basically lets you input any bodyslide slider names you want and then MME will trigger those sliders whenever the event happens. (for example, setting up various butt and legs sliders  so that as milk accumulates , it will  seem like you store it in your lower body instead of your chest.)

 

I made some custom sliders and now the udder can grow along with my breasts for the full Hucow experience.

 

 

 

 

can you share perhaps?

[kvsunfire]

3 hours ago, Mig08 said:

First type in the console

setstage ski_configmanagerinstance 1         -  re-registration of all MCM menus

That just caused the main BAC MCM to disappear from the list

[venomr]

1 hour ago, LinksSword said:

can you share perhaps?

 

I went in an added the file to my old post.

[NoirXiaoba]

15 minutes ago, venomr said:

 

I went in an added the file to my old post.

 

I feel it would be great if this could be "forked" back into the main branch for easier usage. That'd be a mootation I'd be interested to have applied randomly.

[LinksSword]

3 hours ago, venomr said:

So I was fooling around and managed to turn the Udder Mesh by Addywil into a separate armor mod. I added a 4th udder size that's bigger than all the others and also made some object meshes so you can drop it on the ground. Then I added some custom sliders so that I could use it with the "milk mod morph editor." 

 

The Morph editor basically lets you input any bodyslide slider names you want and then MME will trigger those sliders whenever the event happens. (for example, setting up various butt and legs sliders  so that as milk accumulates , it will  seem like you store it in your lower body instead of your chest.)

 

I made some custom sliders and now the udder can grow along with my breasts for the full Hucow experience.

 

 

 

 

I'll leave the file here. Its esl flagged so wont take up any space. I think the textures will overwrite the BAC textures since I just copied the files over, but its harmless. 

 

Should be stand alone and work without the being a cow mod. I included the custom sliders in a separate file so people can add them to the official BAC udder if they want, and some instructions on how to do it for anyone not familiar with outfit studio. I plan to redo the sliders later since I discovered an issue after some testing, but I'm uploading the mod now since it's in a working state.

 

I made it for SKyrim SE, CBBE 3BA. 

 

bac udder solo 0.3.rar 15.82 MB · 3 downloads

 

Skyrim SE CBBE 3BA? how convenient i just so happen to be running that exact same setup.

[tigerrrrulez]

Dont know where to actually ask this lel, but playing this skyrim se version but like breast and weight increase barely does anything if at all even those potions of enourmaus boobs i dont think they increase the size at all of the boobs

[LinksSword]

@botticellijust wondering, you can share it as spoilers but i was wondering what these new quests were that you added? 

[Nova4]

Hello, first of all I wanted to thank you for this mod I'm loving the new options for the transformation and I can wait to see what else do you do with this mod.

I wanted to report some bugs:

1- Paul only gives me the option to equip one item in my save file, he has the dialogue to do it but he nevers progresses beyond the first option.

2- When you ask Paul to pierce your nose, the game never spawns the chair for me to sit down.

3- The hunters quest bugs out and after the pause to tatoo your body, hey never talk to me again and when I somehow managed to keep the dialogue, they never add any tatoos to my body.

3- I tried to use the debug option to add the tattoos but it doesn't work for me.

[LinksSword]

8 hours ago, venomr said:

 

I went in an added the file to my old post.

btw what is the name of the slider because i tried adding it into SLIF and it's not working with this name, and i am using your meshes and had built with morphs enabled.

 

 

[venomr]

21 minutes ago, LinksSword said:

btw what is the name of the slider because i tried adding it into SLIF and it's not working with this name, and i am using your meshes and had built with morphs enabled.

 

Yeah those are the correct slider names. UdderFill1, UdderFill2, UdderFill3.

 

Should work when you have any of the Addy type udders equipped. Maybe I missed a step somewhere when I zipped the files? There's a chance I used the wrong esp and linked to the wrong meshes.

 

Spoiler

 

Edited April 29, 2022 by venomr

[Mig08]

9 hours ago, kvsunfire said:

That just caused the main BAC MCM to disappear from the list

Try to start a new game.

Wait 5 minutes.

Check MCM, if there is no MCM BAC, restart the game completely, and wait a little longer.

A few reboots usually helps.

Next, you can try reinstalling BAC,

reinstall SkyUI and raise it higher in the downloads list.

To play on Skyrim SE, a BAC mod conversion is required.

Edited April 29, 2022 by Mig08

[FusRoDah2]

6 hours ago, tigerrrrulez said:

Dont know where to actually ask this lel, but playing this skyrim se version but like breast and weight increase barely does anything if at all even those potions of enourmaus boobs i dont think they increase the size at all of the boobs

For breasts: Have you build your bodyslides with morphs?
For weight: Does the bodyslide preset you are using actually have much difference between 0 weight and 100 weight?

  

13 hours ago, fred200 said:

The main incompatibility with SE is the LE BSA.

If you just don't pack it in the BSA - life gets much easier.

I ran the mod folder through Cathedral asset optimizer and it works fine. Saw the Minotaur added by the latest update without any graphical issues. Takes very little effort. MCM works as well.

Edited April 29, 2022 by FusRoDah2

[botticelli]

6 hours ago, Nova4 said:

Hello, first of all I wanted to thank you for this mod I'm loving the new options for the transformation and I can wait to see what else do you do with this mod.

I wanted to report some bugs:

1- Paul only gives me the option to equip one item in my save file, he has the dialogue to do it but he nevers progresses beyond the first option.

2- When you ask Paul to pierce your nose, the game never spawns the chair for me to sit down.

3- The hunters quest bugs out and after the pause to tatoo your body, hey never talk to me again and when I somehow managed to keep the dialogue, they never add any tatoos to my body.

3- I tried to use the debug option to add the tattoos but it doesn't work for me.

1-> The equip quest has a cooldown of a day or so

2-> Did you install 1.9E? Making the ZaZ furniture to show up is a pain in the ass. With 1.9E, I now make 10 tries instead of one.

3-> Is that SE or LE? Don't wonder, if the tats do not show up immediately. Especially while in the pump, no updates will be processed because that definitly short-ends the scene.. After the black screen, the hunter should do a force greet. If that fails, try to pick him in the console and then type moveto player.

 

[botticelli]

13 hours ago, NoirXiaoba said:

I feel it would be great if this could be "forked" back into the main branch for easier usage. That'd be a mootation I'd be interested to have applied randomly.

How do you actually add vertices to a new slider in OutfitStudio? For starters, I attached the CBBE sliders to the udders, but that will not change their size.

[botticelli]

7 hours ago, LinksSword said:

@botticellijust wondering, you can share it as spoilers but i was wondering what these new quests were that you added? 

If you must know...

Spoiler

A Craftsman's Masterpiece: Will start randomly after House of Horrors and No one escapes Cidhna Mine are complete and Being A Cow runs. Paul wants you to help him building a milking machine.

The Moo is strong in Hugh: I will not disclose the start, find it yourself. Here you can meet Mandy and Hugh (for whom I needed the Minotaur meshes mentioned above).

 

[Nova4]

2 hours ago, botticelli said:

1-> The equip quest has a cooldown of a day or so

2-> Did you install 1.9E? Making the ZaZ furniture to show up is a pain in the ass. With 1.9E, I now make 10 tries instead of one.

3-> Is that SE or LE? Don't wonder, if the tats do not show up immediately. Especially while in the pump, no updates will be processed because that definitly short-ends the scene.. After the black screen, the hunter should do a force greet. If that fails, try to pick him in the console and then type moveto player.

 

 

1- Yes, paul stops talking to me after I say "I need your help"
2- I installed 1.9E
3-LE and I will try, again even with the debug mode the tats don't show up for me

[evilbom]

i'm test on 1.9E btw

 

weird LOL

Spoiler

 

-------------------------

 

24 minutes ago, Pristbeast said:

Noticed the same thing. Its only for a single stage though.

Once I reached the next stage the horns came back.

i'm re-conversion and work correct again but still weird case
and goddamn CTD on head transform again when convert head into SE LOL

-------------------------

Edited April 29, 2022 by evilbom

[Pristbeast]

2 hours ago, evilbom said:

i'm test on 1.9E btw

 

weird LOL

 

  Hide contents

 

Noticed the same thing. Its only for a single stage though.

Once I reached the next stage the horns came back.

[LinksSword]

7 hours ago, botticelli said:

If you must know...

  Reveal hidden contents

A Craftsman's Masterpiece: Will start randomly after House of Horrors and No one escapes Cidhna Mine are complete and Being A Cow runs. Paul wants you to help him building a milking machine.

The Moo is strong in Hugh: I will not disclose the start, find it yourself. Here you can meet Mandy and Hugh (for whom I needed the Minotaur meshes mentioned above).

 

interesting, i like the idea of mini hidden quests in-between, maybe add some more in the future that take place before the hunter event, some that causes your character to become a milk cow in the first place, add milkpumps to dungeon areas that make sense and in the context of the quest, i know there is one vanilla quest that you end up falling for a trap which was rigged chest and you are trapped in a cage but imagine instead of just the cage you are also forced into a milkpump. Random encounters involving anything milking related would def add too the mod.

[SilentOption]

7 hours ago, Pristbeast said:

Noticed the same thing. Its only for a single stage though.

Once I reached the next stage the horns came back.

Did you install the tattoo model texture that could be the culprit