Wartimes - a daughter's tale (Alternate start scenario) SE

[nhb2]

Greetings! 

Thank you for all for providing so much help to get this mod ported and operational. I have to admit to still having confusion, after reading through the support thread, over what needs to be installed and in what order. Am I correct in assuming that only two files are necessary? Specifically pchs Wartimes Alt Start SE V2.21.7z and Wartimes Tweak v4.2 (23-June-2021).7z. Further is it also true that pchs Wartimes Alt Start SE V2.21.7z should be lower down (loading after) Wartimes Tweak v4.2? 

Or am I wrong in this and all files are needed?

Thank you in advance for your assistance!

 

[Martok73]

On 6/29/2021 at 4:49 PM, nomkaz said:

Monoman1's Wartimes Tweak SE ( I sent them a copy as well)

Wartimes Tweak SE v4.2 (23-June-2021).7z 1.11 MB · 32 downloads

This is the only file I need now correct? Or do I still need something else? Also, with the tweaks, what are the new requirements? I read over on the LE thread that he had removed some of them with this update.

[nomkaz]

1 hour ago, Martok73 said:

This is the only file I need now correct? Or do I still need something else? Also, with the tweaks, what are the new requirements? I read over on the LE thread that he had removed some of them with this update.

I suggest looking through the LE support thread. I was asked for an SE conversion of the tweaks and here it is. I didn't go digging for more info, I just provided the converted Tweaks file. Monoman1 will most likely be putting it up on the post he uploaded the LE version so if there's info needed, I'm sure it's there.

[nhb2]

On 6/30/2021 at 3:54 PM, Martok73 said:

This is the only file I need now correct? Or do I still need something else? Also, with the tweaks, what are the new requirements? I read over on the LE thread that he had removed some of them with this update.

I originally wrote that you needed a couple of files. I'm an idiot. I was looking at the wrong files. Don't listen to what I say. Wish I could sort out why the MCM isn't working right. It appears but I am unable to change several of the options.

If anyone finds a fix please let me know!

 

 

Edited July 2, 2021 by nhb2

[TaCo1234567890]

On 1/5/2020 at 12:06 AM, MaLaKrus said:

I'm stuck. When father says: "I meant that I have had just enough of both of you!" nothing happens...

Ever found a way to fix this? Also when I take the approach of being more respectfull I get to the part where I will help in the house but that's as far as it gets. Anyone who can help me?

[pleasetryme]

i just installed the requirements on a working build. amputator,simple slavery,sd and the resources, if i install the alt start 1.1.7 game will start as soon as i make new character i get the smoke effect then after a few seconds ctd like instant. tried the daughters tale  1.5.7 dependencys issues. same as the alt start v2020.09.2020.7      alt start version is 4.1.4

 

just made a new character with the other mods all working. i activated wartimes again and then tried to continue it kinda loads then crash to desktop. 

 

 

i tried the LE version on a LE build and it ran spent some time doing that today my father sold me as a slave sob sob 

Edited July 5, 2021 by pleasetryme

[LunarMaster]

I keep getting CTD's like a second after I try to leave "Home" during the loading screen. I'm trying to figure out how to fix this. Where is it located in the map ? Maybe I have a mod doing something to the landscape that's making me crash

[Silvain]

5 hours ago, LunarMaster said:

I keep getting CTD's like a second after I try to leave "Home" during the loading screen. I'm trying to figure out how to fix this. Where is it located in the map ? Maybe I have a mod doing something to the landscape that's making me crash

You are at the stable comming from Whiterun. Then there is the crossroad, you go right and it's on the right side of the road behind the field.

 

Do you have a .netscript crashlog? Might give a hint.

 

Edit: Also make sure to grab all the SE files from the link postet earlier in this thread. It probably isn't the cause but double checking the installation is always a good idea.

 

Edited July 5, 2021 by Silvain

[LunarMaster]

4 hours ago, Silvain said:

You are at the stable comming from Whiterun. Then there is the crossroad, you go right and it's on the right side of the road behind the field.

 

Do you have a .netscript crashlog? Might give a hint.

 

Edit: Also make sure to grab all the SE files from the link postet earlier in this thread. It probably isn't the cause but double checking the installation is always a good idea.

 

Thank you! Apparently it was due to an incompability in my sounds files so that's fixed now!

 

Though I have another small problem/bug, sometimes when I try to skip a silent dialogue from Fus-Roh-Dah, it will on it's own, skip the next line without me ever having the chance to read what it says. I wonder if there's a fix for it

Edited July 5, 2021 by LunarMaster

[Junk box]

How do i get it to work?

[Depthcharger35]

On 1/4/2020 at 2:44 PM, Electric Aether said:

It's not appearing in the dialogue

how did you fix it 

[Simsoniter]

I have run out of idears now.

I have installed all lasted version of the mod, i have installed all dependencies. But i still cant start this mod, when starting a new game. I disable/enable starts, renstalled start. Nothing works. 

At the Mara statue, i do not know what to select to start the quest. I haved tried "coc pchsWartimesHome" nothing happens, im not coc'ed. 

I have tried to coc Whiterun, okay, so now im in whiterun, no quest starts. 

Tried help Diary 4, but no diary starts the game

I have check, and all mods and assests are enebled in the Vortex mod managers.

So please, someone, please explain what I am doing wrong, or what to try next. 

 

[Samson Nite]

I have problem with PC zaz boot that not be wearable.

I saw that zaz boot required to put by Father during Party quest. But, as soon as PC put this boot, it does not show and PC has no feet. As I see the install folder file, it corresponds to  "ZariaBoot7_go.nif". I tries many thing to this to fix:

 

1. Turn off all devious device items

2. Schlong re-registered

 

But, it still does not show the boot... Any help will be appreciated.

[Silvain]

On 7/6/2021 at 10:48 PM, Simsoniter said:

I have run out of idears now.

I have installed all lasted version of the mod, i have installed all dependencies. But i still cant start this mod, when starting a new game. I disable/enable starts, renstalled start. Nothing works. 

At the Mara statue, i do not know what to select to start the quest. I haved tried "coc pchsWartimesHome" nothing happens, im not coc'ed. 

I have tried to coc Whiterun, okay, so now im in whiterun, no quest starts. 

Tried help Diary 4, but no diary starts the game

I have check, and all mods and assests are enebled in the Vortex mod managers.

So please, someone, please explain what I am doing wrong, or what to try next. 

 

Well, it sounds like you did not enable the .esp at all. I don't know much about vortex but double check that the esp is enabled and loaded. Maybe Vortex disabled it somehow. Does the MCM show up?

 

3 hours ago, Samson Nite said:

I have problem with PC zaz boot that not be wearable.

I saw that zaz boot required to put by Father during Party quest. But, as soon as PC put this boot, it does not show and PC has no feet. As I see the install folder file, it corresponds to  "ZariaBoot7_go.nif". I tries many thing to this to fix:

 

1. Turn off all devious device items

2. Schlong re-registered

 

But, it still does not show the boot... Any help will be appreciated.

Did you install the correct Zaz Pack? I use V 8 + from the SE download site and have no problems.

 

 

[Samson Nite]

Your pack above is ZAZ 7. Mine is ZAZ 8+. Does t make any difference with two different version, should I downgrade my version?

[Silvain]

7 hours ago, Samson Nite said:

Your pack above is ZAZ 7. Mine is ZAZ 8+. Does t make any difference with two different version, should I downgrade my version?

Nope, 8+ is the right one. (And the description has the mega link to it).

 

It also does not have a bodyslide as far as I'm aware so that also can't be it. Are you using the matching body type? CBBE with CBBE and UNP with UNP?

Maybe something overwrites the boots nif?

 

If that isn't the cause I sadly have no idea what could be wrong.

[Simsoniter]

17 hours ago, Silvain said:

Well, it sounds like you did not enable the .esp at all. I don't know much about vortex but double check that the esp is enabled and loaded. Maybe Vortex disabled it somehow. Does the MCM show up?

 

Did you install the correct Zaz Pack? I use V 8 + from the SE download site and have no problems.

 

 

I checked Vortex, and the esp is enabled, but the game its self is disabling it, al least this is what is say though the ingame mod list.  

 

I think the problem is with the display model. I downlowed the lates directlt from Darkconsoles Github.

https://github.com/darkconsole/dse-display-model/wiki/Release-Notes:-Beta-6

The esp is now called dse-display-model.esp, and the Wartimes mod, is requesting for a file called dcc-dm2.esp, so even though the display model is installedand works the Wartimes mod does not recognize it because the mod is named differently, which causes the main game to disable it.  Al least that's my theory anyway. 

 

Am I using the work display model mod?

[Silvain]

17 minutes ago, Simsoniter said:

I checked Vortex, and the esp is enabled, but the game its self is disabling it, al least this is what is say though the ingame mod list.  

 

I think the problem is with the display model. I downlowed the lates directlt from Darkconsoles Github.

https://github.com/darkconsole/dse-display-model/wiki/Release-Notes:-Beta-6

The esp is now called dse-display-model.esp, and the Wartimes mod, is requesting for a file called dcc-dm2.esp, so even though the display model is installedand works the Wartimes mod does not recognize it because the mod is named differently, which causes the main game to disable it.  Al least that's my theory anyway. 

 

Am I using the work display model mod?

 

That is most certainly not what is happening. Display model is not a hard requirement. I don't have it and have no problem. Also the SE version of Display model is not working for Wartimes since Monoman does not play SE.

 

Do you have installed the right wartimes version? Everything necessary is on this page:

 

You do not need any other Wartimes files. Other requirements are Zaz, Sexlab and Alternate Start.

[Samson Nite]

I am Using 3BA body. My ZAZ is 8.0+ and has its own CBBE bodyslider inside package. I don't know what is wrong if it is not display model.

I am not using tweaked version of wartime which requires to work around with dcc-dm2.esp.

Just one step old one which I am using has been fixed by somebody who sent us by post(I don't remember his name: very popular moder) us one new wartime.esp file that fixed this name issue.

 

I just hope that Zaira may consider this issue in his new development, just one added Zaira's heel, not ZAZ's heel. I cross my finger.

[Silvain]

14 minutes ago, Samson Nite said:

I am Using 3BA body. My ZAZ is 8.0+ and has its own CBBE bodyslider inside package. I don't know what is wrong if it is not display model.

I am not using tweaked version of wartime which requires to work around with dcc-dm2.esp.

Just one step old one which I am using has been fixed by somebody who sent us by post(I don't remember his name: very popular moder) us one new wartime.esp file that fixed this name issue.

 

I just hope that Zaira may consider this issue in his new development, just one added Zaira's heel, not ZAZ's heel. I cross my finger.

Ha, found the issue. It's not zaz. It's Devious Devices! So you need that. Maybe it's enough to install the meshes, dunno if that will cause issues though.

 

 

[Samson Nite]

Can I get ZariaBoot7_1.nif from Devious Device expansion or from Wartime package? I cannot see it in Wartime.

I have Devious Device 5.1 newly updated version, not 4.3.

[Samson Nite]

Oh, hold one, Wartime says ZariaBoot7_go.nif, not ZariaBoot7_1.nif. Why do I need ZariaBoot7_1.nif then?

[Silvain]

10 minutes ago, Samson Nite said:

Oh, hold one, Wartime says ZariaBoot7_go.nif, not ZariaBoot7_1.nif. Why do I need ZariaBoot7_1.nif then?

 

It says both actually. I think one of those meshes is the model that appears when you drop it. The other is the equipped one, I believe.

 

 

If you have DD 5 installed, build the bodyslide data for it, it should be working. So I guess there is still something wrong. The boots are part of DD and not Wartimes.

Edited July 10, 2021 by Silvain

[Samson Nite]

I got it! Finally, The boot is showing !!!!! But, it is CBBE SE. My PC body is 3BA, So, there is small tiny gap in feet.

Anyway I am happy with what I got. I also admit that I have not built CBBE correctly when I installed DD 5.1. My bad !

[Silvain]

2 minutes ago, Samson Nite said:

I got it! Finally, The boot is showing !!!!! But, it is CBBE SE. My PC body is 3BA, So, there is small tiny gap in feet.

Anyway I am happy with what I got. I also admit that I have not built CBBE correctly when I installed DD 5.1. My bad !

 

Glad it worked.

 

Use these.

They don't cover everything but most. And no, it won't break anything just because they are for 4.3

Edited July 10, 2021 by Silvain