Ulfberto Posted August 9, 2021 Author Posted August 9, 2021 2 hours ago, vranina said: AAF stop in 68%. Reinstall AAF and select for the debug option checkbox. Then upon save load you should get a debug output, so you may show it to me
Sthan Dust Posted August 9, 2021 Posted August 9, 2021 Hiya, this totally broke my entire AAF. Could you put the link to the last patch so I can rollback and see what the problem is ❤️
Sthan Dust Posted August 9, 2021 Posted August 9, 2021 31 minutes ago, Ulfberto said: Reinstall AAF and select for the debug option checkbox. Then upon save load you should get a debug output, so you may show it to me Im not even getting a percentage. It just doesn't load at all now. It sits there. What console commands should I use? I had no problems at all until I installed, and unfortunately I don't have the previous patch saved. COuld you put that back up, or tell me how to reset AAF? I've done this before, but this time It's not working.
vranina Posted August 9, 2021 Posted August 9, 2021 4 hours ago, Ulfberto said: Reinstall AAF and select for the debug option checkbox. Then upon save load you should get a debug output, so you may show it to me Sory for stped cuestin but how? This is need?
Plaguetard Posted August 9, 2021 Posted August 9, 2021 Same issue. Updated to this version and none of my animations are starting. Didn't change anything else. I can't seem to get my AAF debug menu to pop up either.
Ulfberto Posted August 9, 2021 Author Posted August 9, 2021 Uploaded with the fix now, sorry for the inconvenience everyone 3
Plaguetard Posted August 9, 2021 Posted August 9, 2021 Just now, Ulfberto said: Uploaded with the fix now, sorry for the inconvenience everyone All good of course! I did a roll back and the last one definitely worked. I'll try this fix right now and let you know ASAP
Plaguetard Posted August 9, 2021 Posted August 9, 2021 16 minutes ago, Ulfberto said: Uploaded with the fix now, sorry for the inconvenience everyone Yep, looks to be working. Thanks for the fix!
blastikor Posted August 9, 2021 Posted August 9, 2021 8 hours ago, Ulfberto said: Added FF xmls sent by @Tentacus. Original Vioxis is required in case you want to use FF anims, so you can use the bodyslide to make the straps fit your character. Just to be clear. You are referring to this right?
Tentacus Posted August 9, 2021 Posted August 9, 2021 (edited) 10 hours ago, blastikor said: Just to be clear. You are referring to this right? NO. This one: Vioxis' Strap-Ons of Fallout 4 5.0.0 -- Needed for strapon animations These are the same strapon xmls I included with staged Leito plus along with a few extra positions I made just for Hardship for BP70 and Savage Cabbage. It uses the most up to date version of the strap-on (which is so buried on this site that nobody knows it exists) which supports CBBE AND Fusion Girl, and doesn't require a super outdated morphset data XML. @Ulfberto make sure you add that to the instructions. Edited August 9, 2021 by Tentacus 2
blastikor Posted August 9, 2021 Posted August 9, 2021 1 hour ago, Tentacus said: NO. This one: Vioxis' Strap-Ons of Fallout 4 5.0.0 -- Needed for strapon animations These are the same strapon xmls I included with staged Leito plus along with a few extra positions I made just for Hardship for BP70 andSavage Cabbage. It uses the most up to date version of the strap-on (which is so buried on this site that nobody knows it exists) which supports CBBE AND Fuusion Girl, and doesn't require a super outdated mprphset data XML. @Ulfberto make sure you add that to the instructions. Thank you.
Sthan Dust Posted August 9, 2021 Posted August 9, 2021 7 hours ago, Ulfberto said: Uploaded with the fix now, sorry for the inconvenience everyone New Patch works PERFECTLY! Love the new additions! Thank you so much ❤️ 1
Ulfberto Posted August 9, 2021 Author Posted August 9, 2021 2 hours ago, Tentacus said: NO. This one: Vioxis' Strap-Ons of Fallout 4 5.0.0 -- Needed for strapon animations These are the same strapon xmls I included with staged Leito plus along with a few extra positions I made just for Hardship for BP70 andSavage Cabbage. It uses the most up to date version of the strap-on (which is so buried on this site that nobody knows it exists) which supports CBBE AND Fuusion Girl, and doesn't require a super outdated mprphset data XML. @Ulfberto make sure you add that to the instructions. Yes, it has been added to the requirements section
ThatsManBooty Posted August 9, 2021 Posted August 9, 2021 Really glad you are back at looking into FO4, thank you so much for the work you put into M/M support especially. ? 1
mkess Posted August 10, 2021 Posted August 10, 2021 Trying to open the pip boy (TAB) crashes the game now. Goes away by deactivating the mod. Any ideas or known incompabilities that might cause this?
Ulfberto Posted August 10, 2021 Author Posted August 10, 2021 38 minutes ago, mkess said: Trying to open the pip boy (TAB) crashes the game now. Goes away by deactivating the mod. Any ideas or known incompabilities that might cause this? you need to install buffout 4, requirements and installation process in mod description
tuxagent7 Posted August 10, 2021 Posted August 10, 2021 1 hour ago, Ulfberto said: you need to install buffout 4, requirements and installation process in mod description And not a mix of Baka Scrap Heap and Buffout ! I had a lot of problems thinking it would work good. Perk Charts crash, mcm crashes, pipboy crashes, never i have seen so many crash. I stumbled on Ulfberto guide to reinstall everything and i said why not....no baka scrap heap for me And now i finally play 1
Guest Posted August 10, 2021 Posted August 10, 2021 (edited) I see there's a new update, which is great, however, I noticed something incorrect. Not sure if it's a problem. The modconfig.xml seems to reference a folder '60 Addons/20 Extras/050 AJs_Various_XMLs' but it doesn't exist in the 1390257733_UAPv2.6.32_FIX.7z in version 1728128991_UAPv2.6.26 it seems to have been an empty directory. Adding an empty directory fixes this for me, but I have my own custom made module manager, which is for Linux, so maybe it's no problem for vortex / MO2. BTW this mod seems to break my AAF, I had it as well with the previous version, though, so it may be something in my setup. Before this the home button works, after I get 68% and no working home button. I have HARDSHIP and didn't select any moans in this one, also excluded Leito's patch (now it's clear which one it is, thanks for that). Installed Staged Leito plus as well. Not looking for support, I'll probably figure it out myself. Edit: Deselecting the option on the first page, Leito's and 50 shades anim (which I don't seem to have) male & female moans, AAF still works. Edited August 10, 2021 by picobyte
Ulfberto Posted August 10, 2021 Author Posted August 10, 2021 hello @picobyte ill make sure to remove the AJs reference for the next build, thanks for your input. And yes, you should not be able to use the Leito support with Staged Leito Plus. You have to choose between them.
Ulfberto Posted August 12, 2021 Author Posted August 12, 2021 (edited) UAP Updated to v2.7 - Added Filler animation (Filler2P), for incomplete sequences (with no climax stage). Its meant to be used in positionTree isExit branches - Updated BP70 package to support latest BP70 v2.7 for both MM and FM pairings The newly added supported animations are: [UAP] BP70 - Kissing [UAP] BP70 - Pit Doggy [UAP] BP70 - Romantic Missionary [UAP] BP70 - Spooning [UAP] BP70 - Chair Spank [UAP] BP70 - Reverse Cowgirl (Couch) [UAP] BP70 - Couch Cowgirl [UAP] BP70 - Couch Missionary [UAP] BP70 - Bed Romantic Missionary (Single Bed) [UAP] BP70 - Locker Sex Also, i wont continue the alignment for MM anims from now on, because the patch is quite outdated and i want to make it updated a priority - Changed all position IDs named as [UAP] BP70's to just [UAP] BP70 - Made it so the AJ XMLs folder is not referenced in the ModuleConfig.xml anymore Edited August 12, 2021 by Ulfberto 3
mkess Posted August 12, 2021 Posted August 12, 2021 On 8/10/2021 at 2:43 AM, Ulfberto said: you need to install buffout 4, requirements and installation process in mod description Ok, thank you. I missed that part.
HummingArrow Posted August 15, 2021 Posted August 15, 2021 (edited) just tried to install it and the 50 shades option was greyed out despite having it enabled. nevermind i read the hover over text Edited August 15, 2021 by HummingArrow
SoleSleeper111 Posted August 19, 2021 Posted August 19, 2021 Having an issue with getting any moans or breathing. Got custom moans downloaded and didn't get the support as instructed, but still its all silent, just the sex noises are the only thing there. Any ideas?
Recommended Posts