Sexlab Aroused Redux SSE Version 29

[Faustling]

I keep getting this with the FNIS tool:

 

>>Warning: \character\behaviors\FNIS_SexLabAroused_Behavior.hkx not Skyrim SE compatible<<

 

I see it over and over in the Forums. Does anyone know what it refers to?

 

I recently had to rebuild my load from scratch after a disk error wiped the Vortex database, and I thought I had everything straight, and then this turns up.  I have no idea where it came from . I totally uninstalled SexLab, Zaz and Devious Devices, and still it keeps popping up. I took out all of FNIS except the base mod (that lets me run the FNIS tool) and ghosted the plug-ins.  There is hardly any animation left, I deleted it all. So why does this continue to plague me?

[fishburger67]

13 hours ago, Faustling said:

I keep getting this with the FNIS tool:

 

>>Warning: \character\behaviors\FNIS_SexLabAroused_Behavior.hkx not Skyrim SE compatible<<

 

I see it over and over in the Forums. Does anyone know what it refers to?

 

I recently had to rebuild my load from scratch after a disk error wiped the Vortex database, and I thought I had everything straight, and then this turns up.  I have no idea where it came from . I totally uninstalled SexLab, Zaz and Devious Devices, and still it keeps popping up. I took out all of FNIS except the base mod (that lets me run the FNIS tool) and ghosted the plug-ins.  There is hardly any animation left, I deleted it all. So why does this continue to plague me?

You must be using the LE version. 

[Faustling]

The LE version of what? I just uninstalled everything I could think of.

 

(Later).  OK. I found it.  It was Sex Lab Aroused Extended.  My mistake.

Edited June 2, 2021 by Faustling

[skin6634]

Hi ,I want to ask some question.

After I install this mod , When I open skyrim everytmie, it always show"Sexlab Aroused is ready to use".
It always show and don't disppear....

[Agnot2014]

I have a small problem.

Everything works great for the player. With Lydia things are different, we go through the topics ok and she agrees and runs over to the animal in this case a Riekling and then I get the notification Lydia is unable to attend the Riekling (I think that’s the whole wording but as its so fast I may have the end part slightly wrong).

Any ideas where I should look for the setting I’ve missed?

[Tlam99]

7 minutes ago, Agnot2014 said:

Lydia is unable to attend the Riekling (I

This is from sl aroused creatures. Switch off line of sight needed.

 

[mercury9]

Hi I'm new to the forum. If anyone is still around to help me out I would be grateful. I have been pulling my hair out trying to figure out what is wrong. I normally use Nexus mods to load them into my game. I double checked to see if all my files were SE compatible, and I ran everything through FNIS and it says I'm good to go. When I go to launch the game through SKSE64 it won't launch. So I disabled my mods one by one to see which one was the one that caused it. The only file it showed there was a problem was with this sexlab aroused redux sse. I disabled my other mods to see if It was just incompatible with one of them and it still wouldn't launch. I updated FNIS and i have the latest SKSE64. For convenience sake I attempted to load it into MO2 and I can't launch it from there either. I've added the picture of my mods and load order from MO2, but I normally use Vortex. If someone could tell me what I'm doing wrong I would be thankful. 

[fishburger67]

14 hours ago, mercury9 said:

Hi I'm new to the forum. If anyone is still around to help me out I would be grateful. I have been pulling my hair out trying to figure out what is wrong. I normally use Nexus mods to load them into my game. I double checked to see if all my files were SE compatible, and I ran everything through FNIS and it says I'm good to go. When I go to launch the game through SKSE64 it won't launch. So I disabled my mods one by one to see which one was the one that caused it. The only file it showed there was a problem was with this sexlab aroused redux sse. I disabled my other mods to see if It was just incompatible with one of them and it still wouldn't launch. I updated FNIS and i have the latest SKSE64. For convenience sake I attempted to load it into MO2 and I can't launch it from there either. I've added the picture of my mods and load order from MO2, but I normally use Vortex. If someone could tell me what I'm doing wrong I would be thankful. 

No idea.  Sorry

[Tlam99]

This load order looks like just added mods by occasion and time and never been sorted.

You will find a couple of guides here how to sort it.

[mercury9]

Hey, so I reordered my MO2 and it didn't make a difference. I was curious, because of mod compatibilities in general if I would have an easier time modding oldrim instead of SE and it turns out I was right. I just endedup adding everything to LE and I haven't encountered a single problem. I just wanted to update. Thanks for the help though. 

[Sedulous]

Thanks for porting to sse ^_^

[Derethevil]

At this point i don't know anymore what to do.
I tried updating it normally, even started a new character. Took off all mods..
No matter what i do, the mod never updates to v29. It stays at v28 in the Modlistsettings.

What do i do wrong?

[fishburger67]

On 6/24/2021 at 2:22 AM, mercury9 said:

Hi I'm new to the forum. If anyone is still around to help me out I would be grateful. I have been pulling my hair out trying to figure out what is wrong. I normally use Nexus mods to load them into my game. I double checked to see if all my files were SE compatible, and I ran everything through FNIS and it says I'm good to go. When I go to launch the game through SKSE64 it won't launch. So I disabled my mods one by one to see which one was the one that caused it. The only file it showed there was a problem was with this sexlab aroused redux sse. I disabled my other mods to see if It was just incompatible with one of them and it still wouldn't launch. I updated FNIS and i have the latest SKSE64. For convenience sake I attempted to load it into MO2 and I can't launch it from there either. I've added the picture of my mods and load order from MO2, but I normally use Vortex. If someone could tell me what I'm doing wrong I would be thankful. 

Aroused won't be your issue, look elsewhere.

[Eric Shun]

On 4/3/2018 at 3:16 PM, fishburger67 said:

 

You have to pick an animation where you can have an orgasm.

 

Here is the code to decide it:

    Bool canHaveOrgasm = False
    If (animation.HasTag("Anal") || animation.HasTag("Vaginal") || animation.HasTag("Masturbation") || animation.HasTag("Fisting"))
        canHaveOrgasm = True
    EndIf

 

Might possibly need to add "Lesbian" to that list if the pc is female.  Let me know what animation you are using where you expect an orgasm.

Where is this config?

[fishburger67]

4 hours ago, Eric Shun said:

Where is this config?

Config?  No such thing.

[Eric Shun]

16 hours ago, fishburger67 said:

Config?  No such thing.

Well, how do I access that code? and change it? I'm experiencing that problem where lesbian animations aren't satisfying desires.

[CriticalTentacles]

On 8/31/2021 at 3:23 PM, Eric Shun said:

Well, how do I access that code? and change it? I'm experiencing that problem where lesbian animations aren't satisfying desires.

You have to edit the PSC file. 

 

1.  Go to steamapps/common/SSE/Data/Scripts/Source 
2.  Search for the file "slamainscr" and save a copy of it elsewhere just in case
3.  Open the .psc in Notepad
4.  Press control + f and search for "bool canhave," this should take you directly to the line needed
5.  Remove the second parenthesis from animation.HasTag("Fisting")), then press space and add || animation.HasTag("Lesbian"))
6.  Save and exit

Keep in mind that the amount of arousal reduced is also dependent on how long the animation lasts, so lesbian animations that are only 3-4 stages long won't drop arousal levels as much as an animation that is 5+ stages. 

[MetalDude]

Ok so, i know this might be a dumb question but...Is there a way to change ALL npc gender preference without the need to target them? If yes, how?

[fishburger67]

On 9/18/2021 at 4:01 AM, XiveMotal said:

Ok so, i know this might be a dumb question but...Is there a way to change ALL npc gender preference without the need to target them? If yes, how?

Best to ask this on the Sexlab forum

[Enchantress1642]

This does NOT WORK for special edition please fix this or tell everyone it is NOT for special edition. Just did this and it is not compatible.

[Tlam99]

1 hour ago, Enchantress1642 said:

NOT WORK for special edition

Wow, 1000nds and 1000nds must then be sitting in front of the screen dreaming, dreaming it works.

 

[fishburger67]

6 hours ago, Enchantress1642 said:

This does NOT WORK for special edition please fix this or tell everyone it is NOT for special edition. Just did this and it is not compatible.

It works fine, you fucked something up.  Please check your work before posting comments like this.

[ravensm785]

any way to get this to work with ostim?

[zer02]

On 9/29/2021 at 8:00 PM, Enchantress1642 said:

This does NOT WORK for special edition please fix this or tell everyone it is NOT for special edition. Just did this and it is not compatible.

actually, it works)

[sen4mi]

I ran into an issue with sexlab separate orgasm where it collides with this mod: https://www.loverslab.com/topic/100070-sexlab-separate-orgasm-se/?do=findComment&comment=3562263

 

This might be sort of a messy issue (because it entangle personalities and then there's the LE vs SE version stuff), but it's something people will need to work out (or, ok, give up on... but hopefully work out, eventually...).

 

I have not studied the code yet -- hopefully this will be really trivial. Hopefully...

Edited November 4, 2021 by sen4mi