Jump to content

CLAMS OF SKYRIM PROJECT Inni Outie HDT Vagina


Recommended Posts

Posted

So when are you going to reveal what the new collision is? :3 

 

I'm using Naturalistic Bounce so I don't know if the new collision will work.

 

lets say you can remove that mod .unless you want a variety of bounce levels .but you can only use one at a time anyway .the problem i find with almost  all hdt vagina mods is they conflict with hdt hair mods .because they use group id 0 .i use 23 on the penis .and they use incorrect center of mass values and it  all on the skeleton and do not even have to be calculated  .

try demoniac texture pack it work

and genrate bodyslide

i have zero issu with texture

with both demoniac aor high texture one

 

good to know give me the link to it ill add it as recommended

I don't know if anyone has this issue, but when I go to downloard the main file i get a microsoft solitaire downloard

 

huu what you mean .solitaire the game ?

Posted

Is there a step I've missed?

 

Both before and after I updated to 3.6, if I build the body using the COS/COSIO body as the outfit/body reference, the mesh in-game becomes a garbled mess when I use it on my custom race. I've given the same setup to some followers and NPC replacers and it works fine. It seems to be specific to the player character.

 

The only sort of "fix" is to make CBBE HDT body the reference with a non-cos preset and then build the body using the batch menu.

Posted

I am so sorry to be a nuisance again but....

 

 

Using fair skin complexion: https://i.gyazo.com/2a71ee187387fc3c4d04a377918b3b79.jpg

Using the Cosio low res texture: https://i.gyazo.com/4b1cc01447539e3e6edb85c5dabbadc8.jpg

Using vanilla textures: https://i.gyazo.com/84c9129a8be4c0f7d008916072b5094b.jpg

Bodyslide Preview using Fair Skin Complexion: https://i.gyazo.com/ac494d477d4c80c52c5af20cb280c15d.png

Bodyslide Preview using low res texture: https://i.gyazo.com/69daf445c0a40f2a4670c09172d3a44a.png

Bodyslide Preview using vanilla textures: https://i.gyazo.com/6129caab2867d1f90c76822ada245bf5.png

 

 

So basically if I go for FSC or vanilla, I get skin textures, if not I get everything working EXCEPT for a skin texture that looks like I have a missingno possessing my character. I apologize if this is a fairly simple fix as I am nowhere close to being an experienced modder. Anyways I made sure that the XPMSE skeleton overwrote everything, built everything in bodyslide, ran FNIS, checked HDT Physics was up to date etc.

 

I tried to fix it myself by making sure I looked over every little thing three times and the only thing left is the remodeled CBBE armor for bodyslide, as you listed that as optional and I prefer Killer Keo's CBBE armor conversions over that one. Again I apologize for being a nuisance if this is really something simple and I'm just dumb.

ok im not sure what you are saying here but . i think is because you get that weird bright spot on the labia .Fairskin does not have the necessary textures for the vagina ill add a patch that replaces those textures with modified once ..Tell me how much Vram do you have on your GPU ?What you send on the "Using the Cosio low res texture" t happens with fairskin because it overloads the vram on some machines .Why it did with the low res does not make sense please make sure it was installed correctly . .you skeleton is correct it would have very clear symptom if it was wrong.

please download the texture download again just in case you got the broken one i uploaded yesterday

 

can you please list the options you used on fairskin mod the so i can create a patch for that

 

i am in process of working with texture authors to add option for COS to there cbbe line

Posted

I don't know if anyone has this issue, but when I go to downloard the main file i get a microsoft solitaire downloard

 

Hey, I think that has something to do with Windows 10 weirdness. I often get the same thing on files i download.  Just change the file type to .rar and it works fine. 

Posted

 

I don't know if anyone has this issue, but when I go to downloard the main file i get a microsoft solitaire downloard

 

Hey, I think that has something to do with Windows 10 weirdness. I often get the same thing on files i download.  Just change the file type to .rar and it works fine. 

 

still using WIN 7 till i have to change

 

Posted

 

 

I don't know if anyone has this issue, but when I go to downloard the main file i get a microsoft solitaire downloard

 

Hey, I think that has something to do with Windows 10 weirdness. I often get the same thing on files i download.  Just change the file type to .rar and it works fine. 

 

still using WIN 7 till i have to change

 

 

Thats because solitare themes are also use "rar" as filetype. 

Just assign rar to your archive tool (7-zip, win-rar... ) 

Posted

Is there a step I've missed?

 

Both before and after I updated to 3.6, if I build the body using the COS/COSIO body as the outfit/body reference, the mesh in-game becomes a garbled mess when I use it on my custom race. I've given the same setup to some followers and NPC replacers and it works fine. It seems to be specific to the player character.

 

The only sort of "fix" is to make CBBE HDT body the reference with a non-cos preset and then build the body using the batch menu.

Actually nevermind, that fix only works for the older version of COS.

No matter what I do with 3.6, I end up with a shredded mesh, it also turns out that the vagina area on NPC's that I thought had it working are also kind of warped.

Posted

 

Is there a step I've missed?

 

Both before and after I updated to 3.6, if I build the body using the COS/COSIO body as the outfit/body reference, the mesh in-game becomes a garbled mess when I use it on my custom race. I've given the same setup to some followers and NPC replacers and it works fine. It seems to be specific to the player character.

 

The only sort of "fix" is to make CBBE HDT body the reference with a non-cos preset and then build the body using the batch menu.

Actually nevermind, that fix only works for the older version of COS.

No matter what I do with 3.6, I end up with a shredded mesh, it also turns out that the vagina area on NPC's that I thought had it working are also kind of warped.

 

i will release a Cos SE version for Skyrim se at a late date .but it cinda depends on SKSE coming  to SKYRIM se and so far it seems it not

 

Posted

 

 

Is there a step I've missed?

 

Both before and after I updated to 3.6, if I build the body using the COS/COSIO body as the outfit/body reference, the mesh in-game becomes a garbled mess when I use it on my custom race. I've given the same setup to some followers and NPC replacers and it works fine. It seems to be specific to the player character.

 

The only sort of "fix" is to make CBBE HDT body the reference with a non-cos preset and then build the body using the batch menu.

Actually nevermind, that fix only works for the older version of COS.

No matter what I do with 3.6, I end up with a shredded mesh, it also turns out that the vagina area on NPC's that I thought had it working are also kind of warped.

 

i will release a Cos SE version for Skyrim se at a late date .but it cinda depends on SKSE coming  to SKYRIM se and so far it seems it not

 

This isn't for SE, this is oldrim. I have all the requirements and they're up to date. Yet I can't seem to get the body mesh to work.

Posted

Update seems to be working for me. I had to rebuild my preset because I haven't figured out how to save them so they are compatible across the board, but that's just my fault.

 

I use Demoniac skin so I had no issues with that. I did a mid-game install of it on a clean save with no issues I can see so far. Haven't had a lot of time to test yet, but normal male penis and fingers work on the vagina.

 

Going to try the animals in a bit after some errands and will report back.

 

Question, what is the difference between the physics extension you posted right before the update and the one in the update? or isn't there any? Just trying to decide which to use since I used to use one of the ones in the all in one.

Posted

Update seems to be working for me. I had to rebuild my preset because I haven't figured out how to save them so they are compatible across the board, but that's just my fault.

 

I use Demoniac skin so I had no issues with that. I did a mid-game install of it on a clean save with no issues I can see so far. Haven't had a lot of time to test yet, but normal male penis and fingers work on the vagina.

 

Going to try the animals in a bit after some errands and will report back.

 

Question, what is the difference between the physics extension you posted right before the update and the one in the update? or isn't there any? Just trying to decide which to use since I used to use one of the ones in the all in one.

 

more stable breast and but bounce nad its based real world weights of a D cub size breast it should scale acording to you sise you make in bodyslide cbbe morths and pregnancy scaling mods.has belly bounce and deformation .did not have that before .did not have male fingers to vag collision before .adds hdt to texticals and male and female hands collision with it .and adds male and female mouth collision to vag .

and just for fun added hdt to khajiit and argonian tails .the beast hdt is still work in progress

Posted

 

Update seems to be working for me. I had to rebuild my preset because I haven't figured out how to save them so they are compatible across the board, but that's just my fault.

 

I use Demoniac skin so I had no issues with that. I did a mid-game install of it on a clean save with no issues I can see so far. Haven't had a lot of time to test yet, but normal male penis and fingers work on the vagina.

 

Going to try the animals in a bit after some errands and will report back.

 

Question, what is the difference between the physics extension you posted right before the update and the one in the update? or isn't there any? Just trying to decide which to use since I used to use one of the ones in the all in one.

 

more stable breast and but bounce nad its based real world weights of a D cub size breast it should scale acording to you sise you make in bodyslide cbbe morths and pregnancy scaling mods.has belly bounce and deformation .did not have that before .did not have male fingers to vag collision before .adds hdt to texticals and male and female hands collision with it .and adds male and female mouth collision to vag .

and just for fun added hdt to khajiit and argonian tails .the beast hdt is still work in progress

 

 

That list is for the .xml that is in the 3.6 update, correct?

Posted

 

 

Update seems to be working for me. I had to rebuild my preset because I haven't figured out how to save them so they are compatible across the board, but that's just my fault.

 

I use Demoniac skin so I had no issues with that. I did a mid-game install of it on a clean save with no issues I can see so far. Haven't had a lot of time to test yet, but normal male penis and fingers work on the vagina.

 

Going to try the animals in a bit after some errands and will report back.

 

Question, what is the difference between the physics extension you posted right before the update and the one in the update? or isn't there any? Just trying to decide which to use since I used to use one of the ones in the all in one.

 

more stable breast and but bounce nad its based real world weights of a D cub size breast it should scale acording to you sise you make in bodyslide cbbe morths and pregnancy scaling mods.has belly bounce and deformation .did not have that before .did not have male fingers to vag collision before .adds hdt to texticals and male and female hands collision with it .and adds male and female mouth collision to vag .

and just for fun added hdt to khajiit and argonian tails .the beast hdt is still work in progress

 

 

That list is for the .xml that is in the 3.6 update, correct?

 

 

thats correct

 

Posted

 

 

 

I don't know if anyone has this issue, but when I go to downloard the main file i get a microsoft solitaire downloard

 

Hey, I think that has something to do with Windows 10 weirdness. I often get the same thing on files i download.  Just change the file type to .rar and it works fine. 

 

still using WIN 7 till i have to change

 

 

Thats because solitare themes are also use "rar" as filetype. 

Just assign rar to your archive tool (7-zip, win-rar... ) 

 

Thanks much

Posted

Beast races HDT tails kinda broken on my end on version 3.6, had to navigate and delete tail related files. that a known issue? am i missing a mod related to tails? everything else works perfectly, i overwritten w'e AIO-Animated-Pussie had (using MO so i put it below it to get the new version of the body :D)

 

Side note: this is the best body for Skyrim hands down, thank you so much for this <3

Posted

Beast races HDT tails kinda broken on my end on version 3.6, had to navigate and delete tail related files. that a known issue? am i missing a mod related to tails?

 

what does it do ?there is a found problem that the tails go stiff if you delete the hdtSkyrimMemPatch.dll in skse plugins might fix it .

i know agononian tails can be crooked i dont knpw why yet because there is no differance between argoanian and khajiit tails beside the mesh

Posted

 

Beast races HDT tails kinda broken on my end on version 3.6, had to navigate and delete tail related files. that a known issue? am i missing a mod related to tails?

 

what does it do ?there is a found problem that the tails go stiff if you delete the hdtSkyrimMemPatch.dll in skse plugins might fix it .

i know agononian tails can be crooked i dont knpw why yet because there is no differance between argoanian and khajiit tails beside the mesh

 

it just looks stuck in place, or the tail is going up up doing weird animation, im not playing a beast race but noticed it on an Argonian and started testing around with him. 

Posted

 

 

Beast races HDT tails kinda broken on my end on version 3.6, had to navigate and delete tail related files. that a known issue? am i missing a mod related to tails?

 

what does it do ?there is a found problem that the tails go stiff if you delete the hdtSkyrimMemPatch.dll in skse plugins might fix it .

i know agononian tails can be crooked i dont knpw why yet because there is no differance between argoanian and khajiit tails beside the mesh

 

it just looks stuck in place, or the tail is going up up doing weird animation, im not playing a beast race but noticed it on an Argonian and started testing around with him. 

 

yes just hdtSkyrimMemPatch.dll file in skse/plugins it has been reported that will fix the problem . i am working in the crooked tail on Arizonians right now

Posted

yes just hdtSkyrimMemPatch.dll file in skse/plugins it has been reported that will fix the problem . i am working in the crooked tail on Arizonians right now

Uhh.. i kinda have several mods that add that same `.dll` file so its easier for me to just remove the tail related files from COS files, unless you want me to test without it? what does that .dll file do anyway, i never understood lol

Posted

 

yes just hdtSkyrimMemPatch.dll file in skse/plugins it has been reported that will fix the problem . i am working in the crooked tail on Arizonians right now

Uhh.. i kinda have several mods that add that same `.dll` file so its easier for me to just remove the tail related files from COS files, unless you want me to test without it? what does that .dll file do anyway, i never understood lol

 

 

not really sure ment to make hdt more stable i am running it now with out it i find no problems

Posted

I just tried removing it, situation was the same, but i did test showracemenu and make myself argonion and cat, it works on player character, but other NPC no, that argonian's tail was still freaking out. btw if i replace hdtPhysicsExtensionsDefaultBBP.xml with another version (naturalistic) will it be bad for new version 3.6 new collision features and stuff?

Posted

I just tried removing it, situation was the same, but i did test showracemenu and make myself argonion and cat, it works on player character, but other NPC no, that argonian's tail was still freaking out. btw if i replace hdtPhysicsExtensionsDefaultBBP.xml with another version (naturalistic) will it be bad for new version 3.6 new collision features and stuff?

 

some collision for hands to testicles and vagina might not work properly .it works together with the other hdt files  .as long as you dont replace the hdtvagina and hdtm files for SOS it should be ok.

as for the hdt tail is not my work ill im looking it to it .it not essential .you can a get a full version of it at HDT Dragon Tails

Posted

No, i only want to replace hdtPhysicsExtensionsDefaultBBP.xml for different jiggle. nothing else, because i felt COS jiggle was a little bit like.. not natural. btw i don't care about HDT tails haha :D but wouldn't mind if you get it working, thanks for everything. much love.

Posted

I was having the tail problem so I moved the dll in question out of the skse plugins folder but still had the issue.  However when I put it right back and checked again the problem resolved itself...

 

Not sure why or if it was a once in a million fix but figured I'd share what I found.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...