Trapped in Rubber (updated 2015-08-02)

[greyspammer]

Is there a way to be able to change the method of interrogation ?

The only official way is during the first dialogue with the yellow rubber slave, when she asks you what you want to do. So if you have already made that choice, you'll have to load a previous savegame and pick a different method during that conversation.

 

Unofficially, you can try the console. 'stopquest tir_twr_int01_talk' will stop the talk subquest, then use either 'startquest tir_twr_int01_org' to try orgasm denial or 'startquest tir_twr_int01_tort' for torture. However, this method is obviously not tested. It might not work and it might break things further down the road.

[PinkAngel62]

 

Is there a way to be able to change the method of interrogation ?

The only official way is during the first dialogue with the yellow rubber slave, when she asks you what you want to do. So if you have already made that choice, you'll have to load a previous savegame and pick a different method during that conversation.

 

Unofficially, you can try the console. 'stopquest tir_twr_int01_talk' will stop the talk subquest, then use either 'startquest tir_twr_int01_org' to try orgasm denial or 'startquest tir_twr_int01_tort' for torture. However, this method is obviously not tested. It might not work and it might break things further down the road.

 

 

Thank you very much, Grey .

[PinkAngel62]

Hi Greyspammer, 

 

I've a new problem, when i finish the rubber toy quest and start rubber upgrade, if i go out of the inn, my game crash . 

 

 

 

 

[greyspammer]

 

I've a new problem, when i finish the rubber toy quest and start rubber upgrade, if i go out of the inn, my game crash . 

 

Hmm... that's a difficult one. I'm not even sure that's caused by my mod. What happens if you teleport via cheat, e.g. 'coc riverwood'?

[PinkAngel62]

 

 

I've a new problem, when i finish the rubber toy quest and start rubber upgrade, if i go out of the inn, my game crash . 

 

Hmm... that's a difficult one. I'm not even sure that's caused by my mod. What happens if you teleport via cheat, e.g. 'coc riverwood'?

 

 

Teleport via console command work but e.g. "coc solitudeorigin" after this i use the map for teleport at the tower, i crash 

[greyspammer]

Teleport via console command work but e.g. "coc solitudeorigin" after this i use the map for teleport at the tower, i crash

Please post your papyrus log from such a crash. Maybe there's something in it to give us a clue.

[PinkAngel62]

 

Hi, 

The crash appears when there is an automatic save or when i save, i disabled automatic save and i don't crash again  

 

[greyspammer]

The crash appears when there is an automatic save or when i save, i disabled automatic save and i don't crash again

I had a similar problem with Deviously Cursed Loot. Fixed it by uninstalling Maria Eden and Deviously Enslaved Continued with pseudo-cleaning the savegame (remove mods, rerun FNIS, load, save, load).

 

Can't tell you if it'll help you though. Still waiting for the log.

[PinkAngel62]

 

The crash appears when there is an automatic save or when i save, i disabled automatic save and i don't crash again

I had a similar problem with Deviously Cursed Loot. Fixed it by uninstalling Maria Eden and Deviously Enslaved Continued with pseudo-cleaning the savegame (remove mods, rerun FNIS, load, save, load).

 

Can't tell you if it'll help you though. Still waiting for the log.

 

It is set , it came from Maria Eden

 

Thank you again   

[mostro]

I've run into a problem.

on the 1st quest when I arrive at the tower after speaking to the servant she tells me to wait here while she go gets "mistress" however she doesn't do anything, just keeps standing there.

 

I tired moving mistress to me via console commands which does help complete the 1st quest but then it doesn't start the next one after talking to mistress and telling her I'm ready for work.

 

any help would be appreciated.

 

cheers.

[greyspammer]

on the 1st quest when I arrive at the tower after speaking to the servant she tells me to wait here while she go gets "mistress" however she doesn't do anything, just keeps standing there.

 

I tired moving mistress to me via console commands which does help complete the 1st quest but then it doesn't start the next one after talking to mistress and telling her I'm ready for work.

To me that sounds like something is wrong with your setup in general. Maybe some other mod is interfering or something is not installed correctly. Post you papyrus log from when you enter the Tower and talk to the pink servant. Also post your mod list.

[mostro]

 

on the 1st quest when I arrive at the tower after speaking to the servant she tells me to wait here while she go gets "mistress" however she doesn't do anything, just keeps standing there.

 

I tired moving mistress to me via console commands which does help complete the 1st quest but then it doesn't start the next one after talking to mistress and telling her I'm ready for work.

To me that sounds like something is wrong with your setup in general. Maybe some other mod is interfering or something is not installed correctly. Post you papyrus log from when you enter the Tower and talk to the pink servant. Also post your mod list.

 

thanks for the quick reply

 

Here are my logs.

 

Hope you can make more of it than I can. My papyrus log seems all over the place. the game runs fine though. Apart form what I mentioned that is.

loadorder.txt

Papyrus.0.log

[greyspammer]

My papyrus log seems all over the place.

Yeah, no kidding. I daresay my initial assumption was correct: Your entire installation seems screwed up. Did you start a new game?

 

I don't know which mods even half the errors come from. The ones I recognise are BeeingFemale, EstrusPlayer, XPMSE 3 and some mod that seems to concern itself with bodily necessities (like urinating or bathing). You could try and disable them (XPMSE 3 is required but may be replaceable with XPMSE 2).

 

My advice: Disable all mods except the bare essentials (like the Unofficial Patches or simple texture mods). Start a new game and check if the log still has errors. If yes, trace them down and fix them. That should be easier because there won't be many possible sources left at that time. Once that works, enable a few more mods (let's say 3) and start a new game again. Check the log again. Trace down possible errors again. Rinse and repeat until you have all your mods enabled except for those which you determined to be a problem.

 

I realise that this is some work and will require a bit of patience but it may be the only solution.

 

I don't think it's a problem of my mod. Because for all the many errors in your log, there's only one that's from Trapped in Rubber. And that one can be ignored and isn't relevant until you reach the Mistress' private chambers.

[mostro]

Allright I'll try that than, cheers for the reply and help

[TheFallen018]

Hi greyspammer, first off, I wanted to say that your mod is amazing. I was just looking for some new quests that sort of worked around bondage and submission in one way. It turns out, I've been into latex for a few years now, and this is right down my alley, and I was just so lucky to stumble upon it. You've done an awesome job, and created a great storyline. 

Most of the game, I've been able to play through, more or less. There have been a few times when dialog subtitles would disappear, if I would press enter before the subtitles changed to the next line. I've also had, mostly where there are multiple NPCs talking, I've had the dialog freeze, which I had been getting around, by saving, and reloading the save. That would then kick it into the next action. However, I've come against something that I can't get past. Perhaps I'm doing something wrong, and this is normal, but I can't get the "Rubber Parade" quest to start. I go to the mistress to finish the "Rubber frame job" quest, and click on the "It's done" dialog. She then proceeds to say something like "Well done", and then my conversation dialog with her closes. I then click on her again to open the dialog to start the "Rubber Parade" quest, but there is nothing more than the generic dialog from other mods, such as "Greetings," "You Fool," "[More Dialogs]," ect. I can't find a way to start the quest. I even tried to activate the quest with setstage [questname] 10, but that didn't do anything.

 

If you could tell me how to fix this, that would be awesome.

 

Keep up the good work mate, Thanks  

[greyspammer]

There have been a few times when dialog subtitles would disappear

I've had this myself (not just with my mod) after reinstalling Skyrim and having it revert back to its default settings. Make sure that subtitles are enabled in the Skyrim settings. Officially, Fus Ro Doh should take care of that. But it seems like it sometimes misses a step or two. Once I permanently enabled subtitles, all dialogues showed up as intended.

 

 

I go to the mistress to finish the "Rubber frame job" quest, and click on the "It's done" dialog. She then proceeds to say something like "Well done", and then my conversation dialog with her closes. I then click on her again to open the dialog to start the "Rubber Parade" quest, but there is nothing more than the generic dialog from other mods, such as "Greetings," "You Fool," "[More Dialogs]," ect. I can't find a way to start the quest. I even tried to activate the quest with setstage [questname] 10, but that didn't do anything.

Try 'sqv tir_twr_parade01' after the quest should have started. It will show you the quests current stage and whether or not the aliases are filled. You can try 'startquest tir_twr_parade01' and if, after a few seconds, it does not progress to stage 10 and has the aliases filled, then... uhm... something is wrong.

 

What that might be is anybody's guess. Could be interference from another mod. Could be a problem with your setup.

[greyspammer]

By the way: I think I found a workaround for the problem of elven ears clipping through gasmasks. My modelling know-how is crap, but I managed to create a slightly bigger version of the gasmask. It's only 3.5% larger, so you won't really notice it. But it's enough to cover the ears of elves - provided you don't make the ears even larger during character creation.

 

As a trade-off, you do get a slight misalignment at the neck, where the mask goes over into the suit. But that can easily be covered with a collar.

[TheFallen018]

 

There have been a few times when dialog subtitles would disappear

I've had this myself (not just with my mod) after reinstalling Skyrim and having it revert back to its default settings. Make sure that subtitles are enabled in the Skyrim settings. Officially, Fus Ro Doh should take care of that. But it seems like it sometimes misses a step or two. Once I permanently enabled subtitles, all dialogues showed up as intended.

 

 

I go to the mistress to finish the "Rubber frame job" quest, and click on the "It's done" dialog. She then proceeds to say something like "Well done", and then my conversation dialog with her closes. I then click on her again to open the dialog to start the "Rubber Parade" quest, but there is nothing more than the generic dialog from other mods, such as "Greetings," "You Fool," "[More Dialogs]," ect. I can't find a way to start the quest. I even tried to activate the quest with setstage [questname] 10, but that didn't do anything.

Try 'sqv tir_twr_parade01' after the quest should have started. It will show you the quests current stage and whether or not the aliases are filled. You can try 'startquest tir_twr_parade01' and if, after a few seconds, it does not progress to stage 10 and has the aliases filled, then... uhm... something is wrong.

 

What that might be is anybody's guess. Could be interference from another mod. Could be a problem with your setup.

 

 

Hey mate, I tried the console commands that you suggested, but all of the aliases were reading as NONE, and when I tried the "startquest" command, I had the same result as last time. I believe you're right that I've managed to mess up my installation somewhere... which sucks... Anyways, I had a look at my papyrus log, and it seems to be printing a lot of similar stack traces when I try to get the quest to start. Unfortunately, I can't understand these stack traces all that well. When I was programming Java, it was more clear to me what was wrong, because I knew the code it referenced. If you would be so awesome, and if it doesn't bother you too much, would you be able to have a quick look, and perhaps see if you could narrow down my list of what I need to fix? Thanks again mate, you're awesome.

 

Merry Christmas

Papyrus.0 - Copy.log

[greyspammer]

Hey mate, I tried the console commands that you suggested, but all of the aliases were reading as NONE, and when I tried the "startquest" command, I had the same result as last time. I believe you're right that I've managed to mess up my installation somewhere... which sucks... Anyways, I had a look at my papyrus log, and it seems to be printing a lot of similar stack traces when I try to get the quest to start. Unfortunately, I can't understand these stack traces all that well. When I was programming Java, it was more clear to me what was wrong, because I knew the code it referenced. If you would be so awesome, and if it doesn't bother you too much, would you be able to have a quick look, and perhaps see if you could narrow down my list of what I need to fix? Thanks again mate, you're awesome.

 

 

I'm no expert myself. I suggest uninstalling "Maria Eden" because that - in my, admittedly limited, experience - causes problems all over the place. The last stack trace in the log is from "Deviously Enslaved Continued". So my advice is to start by uninstalling these two mods and re-running FNIS.

 

Then, just as a quick test, start a new game. Wait for all other mod initialisations to settle down, then open the console and type: 'prid xx067a9b' (replace xx with the load order index of my mod in your set-up). Then type 'enable'. Then try to start the quest: 'startquest tir_twr_parade01'. The quest should start, fill its aliases and auto-progress to stage 10 after a few seconds (with console closed). If it does not, then something else is still wrong. Don't ask me what.

 

If that quick test worked, you can try to salvage your original savegame by pseudo-cleaning it. Load it, save it, load it again. Then try 'resetquest tir_twr_parade01', followed by 'startquest tir_twr_parade01'. If you're lucky, it'll work and you can continue playing. If you're not lucky, it won't work or you'll run into other problems later on. Because technically, you should always start a new game if you uninstall mods.

 

 

And a latexy Christmas to you, too. Plus everyone else!

[TheFallen018]

 

Hey mate, I tried the console commands that you suggested, but all of the aliases were reading as NONE, and when I tried the "startquest" command, I had the same result as last time. I believe you're right that I've managed to mess up my installation somewhere... which sucks... Anyways, I had a look at my papyrus log, and it seems to be printing a lot of similar stack traces when I try to get the quest to start. Unfortunately, I can't understand these stack traces all that well. When I was programming Java, it was more clear to me what was wrong, because I knew the code it referenced. If you would be so awesome, and if it doesn't bother you too much, would you be able to have a quick look, and perhaps see if you could narrow down my list of what I need to fix? Thanks again mate, you're awesome.

 

 

I'm no expert myself. I suggest uninstalling "Maria Eden" because that - in my, admittedly limited, experience - causes problems all over the place. The last stack trace in the log is from "Deviously Enslaved Continued". So my advice is to start by uninstalling these two mods and re-running FNIS.

 

Then, just as a quick test, start a new game. Wait for all other mod initialisations to settle down, then open the console and type: 'prid xx067a9b' (replace xx with the load order index of my mod in your set-up). Then type 'enable'. Then try to start the quest: 'startquest tir_twr_parade01'. The quest should start, fill its aliases and auto-progress to stage 10 after a few seconds (with console closed). If it does not, then something else is still wrong. Don't ask me what.

 

If that quick test worked, you can try to salvage your original savegame by pseudo-cleaning it. Load it, save it, load it again. Then try 'resetquest tir_twr_parade01', followed by 'startquest tir_twr_parade01'. If you're lucky, it'll work and you can continue playing. If you're not lucky, it won't work or you'll run into other problems later on. Because technically, you should always start a new game if you uninstall mods.

 

 

And a latexy Christmas to you, too. Plus everyone else!

 

 

Hi again, I tried reinstalling all of the mods from a new save. I first uninstalled all of the mods, replaced the data folder with an untouched version of skyrim, then installed the following mods.

 

CBBE

CB Plus Plus

Devious Devices: Assets, Integration, and Expansion

FNIS

HTD HighHeels System

SexLab

SexLab Aroused

SkyUI

SkyUI Away

Unofficial Skyrim Patch

XP32 Maximum Skeletons

Zaz Animation, and textures

Trapped in Rubber

 

 

Upon loading it all up, and getting it running, I tried to use the console command "startquest tir_twr_parade01", but as before, nothing happened. Had a look at my papyrus log, and I can't see any error there from trying to start the quest. I saved the game just before trying the console command, and you can see the game saving in the log, and then not much. Perhaps I'm missing something. Could you take a look? Thanks.

Papyrus.0 - Copy.log

[greyspammer]

Upon loading it all up, and getting it running, I tried to use the console command "startquest tir_twr_parade01", but as before, nothing happened. Had a look at my papyrus log, and I can't see any error there from trying to start the quest. I saved the game just before trying the console command, and you can see the game saving in the log, and then not much. Perhaps I'm missing something. Could you take a look? Thanks.

 

 

Did you enable refid xx067a9b before starting the quest, as I wrote in my previous post? Because if you didn't, then it won't work. That's the Mistress and she's disabled at the start of a new game. If you play the mod normally, she'll get enabled long before you reach the parade quest. But if you start it manually via console, you have to enable her by hand as well.

 

There are a lot of aliases in the parade quest. But most are optional, meaning the game won't care if they don't fill. The only non-optional aliases are: The player character herself. I think we can assume that one exists. Then the Mistress, that's what you need to take care of. And the last one is a trigger at the entrance of the playroom in the tower basement that starts a certain scene when you enter. I can see no reason why that one should cause problems.

[Nightlines]

I have a problem, i made the whole story but in the end i dont get any letter where the mistress calls me back. If i visit her she is gone.

[Nightmyste]

during the party i don't get the whip for the rubber punisher scene is there a specific point i need to stand for it to activate

(yes i am at the slave on the horse and the guest is there as well but nothing else is happening)

[TheFallen018]

 

Upon loading it all up, and getting it running, I tried to use the console command "startquest tir_twr_parade01", but as before, nothing happened. Had a look at my papyrus log, and I can't see any error there from trying to start the quest. I saved the game just before trying the console command, and you can see the game saving in the log, and then not much. Perhaps I'm missing something. Could you take a look? Thanks.

 

 

Did you enable refid xx067a9b before starting the quest, as I wrote in my previous post? Because if you didn't, then it won't work. That's the Mistress and she's disabled at the start of a new game. If you play the mod normally, she'll get enabled long before you reach the parade quest. But if you start it manually via console, you have to enable her by hand as well.

 

There are a lot of aliases in the parade quest. But most are optional, meaning the game won't care if they don't fill. The only non-optional aliases are: The player character herself. I think we can assume that one exists. Then the Mistress, that's what you need to take care of. And the last one is a trigger at the entrance of the playroom in the tower basement that starts a certain scene when you enter. I can see no reason why that one should cause problems.

 

 

I believe that you are correct, I think I did forget to enable the mistress. So, I tried again with my clean save, and this time it worked. Unfortunately, that left another problem. If I go into the basement, I can't talk to anyone, and I can't open the sewer either. Is there a way to fix that? Thanks.

[Nightmyste]

alright new problem:

i managed to get to the end of the party by forcing the punisher quest to the next stage (getting the whip and beating the slave) and then just going on normally, now the goodbyes are to be said but they all just stand there, i can move communicate and all but the scene doesn't move on