Public Whore

[Seeker999]

In SLSF Comments, if you just want the comments, go to the Events tab and de-select all the events. Then go to the Quests tab and de-select the quest there - currently only the jarl/bounty quests. Then you'll get fame flavored comments but no actions.

 

PW does not have its own animations. Whenever I have trouble with animations, I usually rerun FNIS to make sure I did it correctly and that I didn't miss any animations because I added them later. I use Vortex so whenever I run FNIS, add/update mods, run Bodyslide, etc. I always hit 'deploy mods' to update my game.

 

I haven't used the current version of PW, and I'm not using it at all in my current pt, but iirc there is an option to disable/disallow 'queuing' events. That might help. Good luck!

[crococat]

Tried patch that was published there and all is ok now (dont pass Windhelm yet)

[genericuser27]

Anyone else having problems with scenes not starting? The dialogue works for me but the scenes don't start.

[Killy8888]

5 hours ago, genericuser27 said:

Anyone else having problems with scenes not starting? The dialogue works for me but the scenes don't start.

I described the exact same problem above, it worked for me after rerunning FNIS animations, I also use Nemesis , so I run fnis first than nemesis 

Edited October 3, 2023 by Killy8888

[genericuser27]

19 hours ago, Killy8888 said:

I described the exact same problem above, it worked for me after rerunning FNIS animations, I also use Nemesis , so I run fnis first than nemesis 

I tried that and it still doesn't work. I am running 1.2.4 SE.

 

The debug message i get after it says trying to start PW sex is something like

attempted to add to queue, but queue is full

Edited October 4, 2023 by genericuser27

[crococat]

17 hours ago, genericuser27 said:

I tried that and it still doesn't work. I am running 1.2.4 SE.

Had this problem in old game. Now start new game an all is ok in LE and SE, I use patch for PW 1.2.4 and SexlabUtilities.

Maybe stop PW sequence, restart Sexlab, restart SLAnimationLoader, restart PW sequence may help (in my game it solwed problem).

Or simplier stop PW and all Sexlab animations, restart PW.

Edited October 5, 2023 by crococat

[endocytosis]

On 9/25/2023 at 6:51 PM, danna233 said:

Here is a similar one. This is his animation, he uses it in his mods.

 

Thanks dude,but it should be an animation instead of a pose.
It's a acting one.
Still,appreciate for your help!

[Celedhring]

Even though my PC is eligible to become a Public Whore as both her Sexual Fame and Hero Fame are over the minimum to trigger being accosted, she isn't getting accosted by guards at all.  

Debug shows "Eligible guard not found" 

It might be easier to just spawn a guard that'll accost the victim if and when she's within city limits and trigger the "accompany" or "arrest" events instead of trying to search for an eligible guard to trigger the events. 

Found the solution.  I uninstalled PW,  cleaned saves and reinstalled as I'd updated PW.  Getting accosted to become a PW now works. 

Edited October 6, 2023 by Celedhring

[Celedhring]

I have a question about PW..is there a mechanism in the mod that in the event the PC is arrested and imprisoned for resisting arrest or having a too high bounty, it'll be converted to a stint as the Public Whore?  It'd make getting jailed more interesting by being forced to be the Public Whore and earn coin for the city she was jailed in. 

[brewmasterhal]

41 minutes ago, Celedhring said:

I have a question about PW..is there a mechanism in the mod that in the event the PC is arrested and imprisoned for resisting arrest or having a too high bounty, it'll be converted to a stint as the Public Whore?  It'd make getting jailed more interesting by being forced to be the Public Whore and earn coin for the city she was jailed in. 

 

Not yet.

[johnqse0000s]

Does anyone know of an issue with version 1.2.4 not having any sex animations after talking to any NPC?

[vladeemer]

1 hour ago, johnqse0000s said:

Does anyone know of an issue with version 1.2.4 not having any sex animations after talking to any NPC?

1.2.4 doesn't have that issue, works fine for most of us. Check the usual culprits: load order, registered animations, run FNIS, etc.

[Astaroth-]

So whenever i star a scene the other actor will dissapear. How to fix that?

 

[johnqse0000s]

10 hours ago, vladeemer said:

1.2.4 doesn't have that issue, works fine for most of us. Check the usual culprits: load order, registered animations, run FNIS, etc.

I've tried all the methods you mentioned, but still no success
And only the sex events in this module cannot be triggered
I rolled back to 1.1.4 and it can be triggered normally

[johnqse0000s]

48 minutes ago, johnqse0000s said:

I've tried all the methods you mentioned, but still no success
And only the sex events in this module cannot be triggered
I rolled back to 1.1.4 and it can be triggered normally

Like this, After the conversation, he should have entered the animation, but he didn't.

Edited October 8, 2023 by johnqse0000s

[jib_buttkiss]

1 hour ago, johnqse0000s said:

Like this, After the conversation, he should have entered the animation, but he didn't.

 

Shot in the dark, but are you using sexlab p+? I've seen other people have similar issues when using p+ instead of normal sexlab.

Edited October 8, 2023 by jib_buttkiss

[johnqse0000s]

1 hour ago, jib_buttkiss said:

 

Shot in the dark, but are you using sexlab p+? I've other people have similar issues when using p+ instead of normal sexlab.

I should just be the most ordinary Sexlab
The one below is the translation

[vladeemer]

12 hours ago, johnqse0000s said:

I've tried all the methods you mentioned, but still no success
And only the sex events in this module cannot be triggered
I rolled back to 1.1.4 and it can be triggered normally

The only time I've had issues with Show of Strength while on 1.2.4 was caused by a mod conflict, and that was more slavery-related (animations worked fine throughout).

 

Sometimes your load order and/or merged patches (if you have any) can mess with papyrus & JSON data. Since I don't know how to dig around in merged patches and fix stuff I find I have to reinstall papyrus once per new game to get everything working properly. I can't say that's what yours needs (or if it's a papyrus or JSON issue--I'm not a modder and don't know what governs what in this case), but reinstalling papyrus and/or jcontainers might be worth looking at.

 

Besides that, unfortunately all I can say is that the issue doesn't come from 1.2.4 itself, which works. 1.2.5 is another story, but 1.2.4 works consistently for most of us.

[Guest]

I've also had problems with scenes starting.
I looked into the source-code and it looks like event are queued up but never started?
You have code like:
 

sexQueue.Enqueue(Alias_PartyEarl.GetActorReference())
sexQueue.Enqueue(Alias_PartyThane.GetActorReference())
sexQueue.Enqueue(Alias_PartyJarlWindhelm.GetActorReference())

but there is nothing to kick the event off.
I was able to partially fix my local installation by re-compiling the scripts myself and modifying it to read:
 

sexQueue.Enqueue(Alias_PartyEarl.GetActorReference())
sexQueue.Enqueue(Alias_PartyThane.GetActorReference())
sexQueue.Enqueue(Alias_PartyJarlWindhelm.GetActorReference())
sexQueue.StartManualMode()

This starts the scenes, though I still had a problems where follow-up story dialogue would start before the queue was empty.
It also looks like the queue can become "corrupted" where if there's an invalid actor reference, then systems using the queue will break rather than removing the bad reference.

It's puzzling since the queue system seems to be broken in most places but if this was the case I would have expected the mod author to realize it immediately. Maybe the underlying issue is due to something else.

(I love the mod btw, I just wish the scenes would work as intended lol)

[gnomedome_]

hi so i downloaded everything correctly and the dialog keeps getting stuck when i do the first quest in whiterun with the shop, it does fine until after nazeem walks out of the store
help would be greatly appreciated

[Guest]

Hey,

 

I have a little problem.

The tattoos wont be shown.

Does anyone has a solution ?

 

Yes, I did download the PW tats and did click refresh tattoos or how it was called. ^^

 

Thanks in advance

[crococat]

15 hours ago, SilentPain99 said:

Hey,

 

I have a little problem.

The tattoos wont be shown.

Does anyone has a solution ?

 

Yes, I did download the PW tats and did click refresh tattoos or how it was called. ^^

 

Thanks in advance

Can you apply tatoo by slavetats? Maube you have all slots ocupied.

[Guest]

7 hours ago, crococat said:

Can you apply tatoo by slavetats? Maube you have all slots ocupied.

Thanks.

That is all grey and there is written "externally" in there and am not able to do anything to them.

[Seeker999]

3 hours ago, SilentPain99 said:

Thanks.

That is all grey and there is written "externally" in there and am not able to do anything to them.

That means one of your mods has 'taken ownership' of those slots to make sure they are available when needed. You need to increase the amount of slots available in your nioverride.ini or skee64.ini, depending on your game. For instance I changed the number of overlays from the default (6) to 24.

[Overlays/Body] ; "Body [Ovl#]" and "Body [SOvl#]"
; Determines how many body overlays there should be
iNumOverlays=24 ; Default[6]
iSpellOverlays=1 ; Default[1]

[Guest]

6 hours ago, Seeker999 said:

That means one of your mods has 'taken ownership' of those slots to make sure they are available when needed. You need to increase the amount of slots available in your nioverride.ini or skee64.ini, depending on your game. For instance I changed the number of overlays from the default (6) to 24.

[Overlays/Body] ; "Body [Ovl#]" and "Body [SOvl#]"
; Determines how many body overlays there should be
iNumOverlays=24 ; Default[6]
iSpellOverlays=1 ; Default[1]

I did so already from 6 to 600 ... because 60 did still not work out ...

Even 600 are not working ...

I found the mod who occupied the placed und removed that one .. But still weird xD

But should be working now .. I did not test it after removing the mod, but I can give the body now a tattoo or more than one.

 

Thanks a lot ?