Arousal Based Breast Adjuster for SE (ABBA)

[pzrshrek2]

My ABBA Dress is bugged, it is grown into the ground in a awkward way. Any way to fix this? I read about Racemenu overlays but i dont know how to fiddle with that inside racemenu.

 

Thanks in advance for any help given, cheers for a great mod!

 

[Bluegunk]

Hi Yinkle

 

Please may I ask: does your ABBA body now permit vagina collisions like the CBBE Body-Special?  I saw a note in the comments about a NIF alteration and wondered if it had since been updated.

 

I also cannot see any Added: new "OpenPussy" slider requiring the ABBA body  when I have the ABBA body up in Bodyslide.                     

I added belly morphing to my CBBE Body-Special, can your body be set up for this?

 

Thank you.

[Yinkle]

23 minutes ago, Bluegunk said:

Hi Yinkle

Please may I ask: does your ABBA body now permit vagina collisions like the CBBE Body-Special?  I saw a note in the comments about a NIF alteration and wondered if it had since been updated.

 

And...I currently have a belly-jiggle and pregnancy morph that I set up in the Greek Goddess CBBE Preset I use [ https://www.nexusmods.com/skyrimspecialedition/mods/24201 ].  

Would I be able to use this preset on your ABBA body? (Really, to save re-doing all my clothes and armour...  ?)  It looks like I can from a test run. 

I'd really like to keep those aspects of the CBBE Special body I am using.

 

Thank you.

Vagina collisions should work fine given the right config files as the bone weighting is very similar to standard CBBE Special.

I can't see an issue with a pregnancy morph if it is racemenu based.

 

Other than that I've been taking a bit of a break from skyrim modding and looking into other possibilities. I may well come back to it but just to let folks know that I'm putting this and my other LL projects on the back burner for now. :)

[Bluegunk]

On 11/16/2019 at 5:32 PM, Yinkle said:

Vagina collisions should work fine given the right config files as the bone weighting is very similar to standard CBBE Special.

I can't see an issue with a pregnancy morph if it is racemenu based.

 

Other than that I've been taking a bit of a break from skyrim modding and looking into other possibilities. I may well come back to it but just to let folks know that I'm putting this and my other LL projects on the back burner for now. :)

 

OK, thanks! The only additional change I'd love to see in ABBA are the moisture effects on the labia coming up around 70%+, instead of 90%. Or at least a choice in the matter!

 

Have a good break.

[KestrelSky]

I use the nipple piercings from devious devices. When the breasts get bigger from arousal the nipple piercings are hidden inside the breasts, is there a fairly simple way to get the piercings to stay with the nipples at different sizes? Attach them to a node somehow? I can almost remember how to do it, its just been a really long time and I forget where to start.

 

[Yinkle]

1 hour ago, KestrelSky said:

I use the nipple piercings from devious devices. When the breasts get bigger from arousal the nipple piercings are hidden inside the breasts, is there a fairly simple way to get the piercings to stay with the nipples at different sizes? Attach them to a node somehow? I can almost remember how to do it, its just been a really long time and I forget where to start.

 

Did you build the DD meshes in bodyslide to your preset with "Build morphs" ticked? If the piercing doesn't have a .tri file then racemenu won't do its magic. That said, it's possible that some of the DD items don't have bodyslide files.

[KestrelSky]

17 hours ago, Yinkle said:

Did you build the DD meshes in bodyslide to your preset with "Build morphs" ticked? If the piercing doesn't have a .tri file then racemenu won't do its magic. That said, it's possible that some of the DD items don't have bodyslide files.

Pretty sure I did, I'll redo it just to be sure. I'm struggling to remember if it worked back when I used deviously cursed loot in LE. Not the end of the world if it doesn't, everything else works and its a lot of fun, thanks for the mod!

 

[Yinkle]

I'm currently working on a few things but I might have a present coming soon, best wishes to all for 2020

[Yinkle]

I just added version 3.2.2

 

I'd be keen to hear feedback on the experimental ABBA amazing body

[BigOnes69]

6 minutes ago, Yinkle said:

I just added version 3.2.2

 

I'd be keen to hear feedback on the experimental ABBA amazing body

Upgrade from 3.2.1 any requirements ??

[Yinkle]

3 minutes ago, BigOnes69 said:

Upgrade from 3.2.1 any requirements ??

same requirements as 3.2.1

 

It should be fine to upgrade mid game, if you get any papyrus errors just do a save clean and you'll be good to go but that won't be likely.

[BigOnes69]

1 minute ago, Yinkle said:

same requirements as 3.2.1

 

It should be fine to upgrade mid game, if you get any papyrus errors just do a save clean and you'll be good to go but that won't be likely.

Thanks 3.2.1 worked great. One of the most reliable mods out there. Great work.

[wtftesnexus]

12 hours ago, Yinkle said:

I just added version 3.2.2

 

I'd be keen to hear feedback on the experimental ABBA amazing body

Just made a few minutes to take a quick look at ABBA v3.2.2.  I'd been wondering if ABBA could be adapted to the 3BBB body that came out and then bam, released.
I didn't see any noticeable effect from the InnieOutie morph (using SLA to adjust arousal values), but I'll check again when I have a little more time (yes, I built in BodySlide).

 

Any plans to include any of the other available morphs (e.g. puffyness, clit)?  Puffyness could cause clipping and the morph range for clit is pretty small, so it may not be worthwhile.

[Yinkle]

18 minutes ago, wtftesnexus said:

Any plans to include any of the other available morphs (e.g. puffyness, clit)?  Puffyness could cause clipping and the morph range for clit is pretty small, so it may not be worthwhile.

I thought about it but decided it wasn't worthwhile like you say. It would be easy enough to add them if enough folk want it though.

[wtftesnexus]

On 1/13/2020 at 3:25 AM, wtftesnexus said:

Just made a few minutes to take a quick look at ABBA v3.2.2.  I'd been wondering if ABBA could be adapted to the 3BBB body that came out and then bam, released.
I didn't see any noticeable effect from the InnieOutie morph (using SLA to adjust arousal values), but I'll check again when I have a little more time (yes, I built in BodySlide).

 

Any plans to include any of the other available morphs (e.g. puffyness, clit)?  Puffyness could cause clipping and the morph range for clit is pretty small, so it may not be worthwhile.

The InnieOutie morph is working for me after all.  Seems I needed to give it a moment, move to a new area, or switch clothes; not sure which, just played normally for a couple minutes, then checked again.  Not surprisingly, it also works with the 3BBB Amazing body.

 

Great job and great present!

I'd be for the extra morphs if available.

[greenmango12]

Very interesting mod, then I hope to know, can I adjust which morph slider will auto-change?

eg as realism, I may hope to not change size so hard,  but hope to a little big, and direct to up wards,

then  nipple more hardens ?

 

And imagine, if it can change with animation stage too,,, though if it need another frame work.. 

[Yinkle]

8 hours ago, greenmango12 said:

Very interesting mod, then I hope to know, can I adjust which morph slider will auto-change?

eg as realism, I may hope to not change size so hard,  but hope to a little big, and direct to up wards,

then  nipple more hardens ?

 

And imagine, if it can change with animation stage too,,, though if it need another frame work.. 

I'm not entirely sure what you are asking but by setting the sliders to 0 nothing will change, setting them to high values will cause big changes based on arousal level. if you just want the nipples to morph but not the breasts then set all breast morphs to 0 and the nipple morphs to what you want. Hope this helps

[greenmango12]

7 hours ago, Yinkle said:

I'm not entirely sure what you are asking but by setting the sliders to 0 nothing will change, setting them to high values will cause big changes based on arousal level. if you just want the nipples to morph but not the breasts then set all breast morphs to 0 and the nipple morphs to what you want. Hope this helps

Thanks so I can adjust each breast and nipple morphs separately in MCM as same as Racemenu in game?

 If so it is what I hoped.? (not auto adjust multiple morphs then change size)  anyway I may try !

==========

Amazing!!!   I worried if it work with CBBE 3bbb (by acro),, after all it worked without problem!! ?

 

I hope if I can add my custom sliders for breast to change with ABBA, if I can.. (I may need to edit your offered source, and compile)

then check source, but still not clear,,  how assgin my custom slider,, it already  shown as 3bbb slider in racemenu of game)?

 

[greenmango12]

@Yinkle

About 3bbb InnieOutieSlider morphs, how you suppose it work?

I usually when make body, set them as 1, (so bascially closed) then by collision, it may open.

or if I need more open, I use racemenu for NPC and PC then adjust with minus value as default (non animation status)

 

Then I suppose, when arrousal = max,  Innie outie should set low value  gradually >> open more,, Is it right?

 

Maybe I miss something but, if I edit source in ABBA_morph.psc 177 to 180 and 218 to 221 

(I assume m==15 is, InnieOutieSlider )

 

        while (m<18)
            float Value = (MorphArouse * Morphs[m]) + MinM[m]
                if (m == 15)
                    SetMorphValue(akActor, -Value, MorphNames[m]) 

 

it seems work,,,, (so when aroused max,, she open it,,)

 

 

 

your offeed psc was  

"-value + 1" for SetMorphValue...   then when I test in game,, she keep tight vagina,,when aroused max,, 

so I assume,, even though arrousal max,, the morph value still 1.0 over..

(InnieOutie =  1 should close her tight)    other part work well (eg nipple, beast,..

 

Though I understand, it is complex formula,, so I do not know if my edit cause un-expected things,,or wrong,,

but if you could take time,, check again please about innieOutie morphs formula fro 3bbb.

 

(the count change 17 to 18,. because I add  my custom anus open moprh ^^;  so it needed , it seems work, with edit ABBA_MCM_script.psc

but I afraid,, if I miss edit something,,, still)

 

Or  I think,, if you suppose, when user generate body-slide,, we may set InnieOutie as 0 (already open without arousal), then it work as you planned? that means,   (BS generate value ) 0 + 1  >> aroused >> 0  + (-value + 1) 

 

[Yinkle]

On 1/22/2020 at 6:58 AM, greenmango12 said:

your offeed psc was  

"-value + 1" for SetMorphValue...   then when I test in game,, she keep tight vagina,,when aroused max,, 

This is because you are building in bodyslide with the InnieOutie slider set to 1. If you  leave it at 0 then it should work fine without editing the script. The "-value + 1" is to compensate for the fact that most people will build with the slider set to 0.

 

I might add an MCM option to enable/disable this feature in a future update.

[greenmango12]

22 minutes ago, Yinkle said:

This is because you are building in bodyslide with the InnieOutie slider set to 1. If you  leave it at 0 then it should work fine without editing the script. The "-value + 1" is to compensate for the fact that most people will build with the slider set to 0.

 

I might add an MCM option to enable/disable this feature in a future update.

OK I see thanks you ^^  if future version could support my way,, really apreciate,  user can choose as they like.

as you know, sometimes , I may hope to disalbe ABBA,,, so as default I hope to close her,.

 

 (actually before I sometime build 3bbb body, set to 0, so my female character already open some how.  I did not like it , (though it make easy show CBPC collision effect to test ,,) then after using ABBA,, I tried to set it as 1.0,, so hoped to see only open with arousal.. then at current I keep my edit version.

[Yinkle]

8 minutes ago, greenmango12 said:

OK I see thanks you ^^  if future version could support my way,, really apreciate,  user can choose as they like.

as you know, sometimes , I may hope to disalbe ABBA,,, so as default I hope to close her,.

 

 (actually before I sometime build 3bbb body, set to 0, so my female character already open some how.  I did not like it , (though it make easy show CBPC collision effect to test ,,) then after using ABBA,, I tried to set it as 1.0,, so hoped to see only open with arousal.. then at current I keep my edit version.

I've added an MCM option and just need to test it out before I release an update. What I think would have been better is if the slider values were reversed to begin with (closed at 0 and open at 1)

[greenmango12]

9 minutes ago, Yinkle said:

I've added an MCM option and just need to test it out before I release an update. What I think would have been better is if the slider values were reversed to begin with (closed at 0 and open at 1)

Yes,,I thought same thing. ,, it seems better start 0 as colse then 1 to open,, when I first see the 3bbb vagina morph.

but as I said, to get collision CBPC work, it seems more stable as default open (half?)

 

(then before there was no morph which easy can open,, so user request,, then 3bbb enhanced more and more, as same as your new ABBA body)

 I may ask it acro43 as future request.

 

 but for me,, up-date  body is not so simple.. (because I added some morph slider,, so always I need to edit script for BS again^^;  I sometiems pass up-date,,

without radical change.. I might need to change some sexy armor, which work with custom slider,, in OS,, everytime body update,, 

at least there seems no request,, I apreciate you added for me  reall thanks.. 

 

[Yinkle]

3.2.4 added!

 

Added: MCM Toggle for 3BA InnieOutie compensation which defaults to on. If you set this slider to 1 (or closed) when building in bodyslide then it's best to toggle this off. If you leave the slider at default 0 then leave this toggled on. Reason for this addition

Added: 3 Butt sliders and MCM page for butt swelling action! If you use the incremental option these sliders are included for smooth swelling.

Edited the notifications to include mention of butt changes. I might add some NPC/follower comments in a future update

[Caenarvon]

Very nice to see this mod come this far, great work!

 

I've been using 3BBB amazing body along with ABBA for a while, but I never really use ABBA amazing body because it seems to be full CBPC body (I prefer full 3BBB's SMP myself). I tried out the 3.2.4 version and it seems swelling doesn't work on full SMP 3BBB amazing anymore, both boobs and butts (works great on ABBA amazing tho). 

I haven't done much testing, do I have to wait for it to kick in or do I have to go reset something? Also, will you add full SMP support to ABBA amazing at any point?