LooksWhosHere Posted February 18, 2025 Posted February 18, 2025 On 12/14/2024 at 3:57 PM, TrollAutokill said: I use the CBBE one with 3BA body, most of the time with no problem. A few misalignments are to be expected. But I never found any incompatibilities with other mods, except DD which has its own problems. hello could you be able to help me , when i use the restraint the arms is not tying it just remain normal
LooksWhosHere Posted February 18, 2025 Posted February 18, 2025 On 2/13/2024 at 12:44 AM, poptdp said: Â Yes, I have. Â In game, Zaz animation pack is showing in the MCM, but I just don't know how to integrate it with Sexlab and to actually see the animations. Â Like my above example, how do I see one of the Zaz vampire sex animations or activate it?? Â Also, when I click into the Sexlab tab of the Zaz MCM, it just freezes and I have to back out of MCM to get it working again.. have you managed to fix it ?
someperson1423 Posted February 24, 2025 Posted February 24, 2025 On 2/18/2025 at 1:59 PM, LooksWhosHere said: have you managed to fix it ?  This is going to sound really dumb but I fixed this by simply waiting. The MCM is super slow sometimes and when I click on the Sexlabs tab I literally go up and grab some water or something and come back in 3-4 minutes and it has popped up. I've found this with a couple mods and I spent a couple hours trying to "fix" Estrus Chaurus+ when there was nothing broken, the mod and its MCM tabs were just glacially slow. Sometimes the MCM actually is frozen, but sometimes it is actually just miserably grinding its gears until it works.  After it loads there is a button to register the ZaZ animations in that tab and they will show up. Hope this helps! 2
Vladel Posted April 2, 2025 Posted April 2, 2025 I've installed 8+ with CBBE 3BBB and for some reason some male NPCs have collars equipped that clip or aren't built properly and i can't seem to do anything about it.
hc789 Posted April 6, 2025 Posted April 6, 2025 (edited) Having issues with the Zaz Animations - all of them are out of alignment in really weird ways (a few examples below). Is there something I am doing wrong or something i am missing? Â The BakaFactory animations are all working fine. Using Pandora to generate and SL P+. (Have tried using Nemesis too but same issues). Â Any ideas would be much appreciated. Â Alternatively, will have to just try to manually adjust positioning for every misalign if i can be bothered. Â Â Â Edited April 6, 2025 by hc789
sil7373 Posted April 11, 2025 Posted April 11, 2025 Hi, so I'm new to ZAZ and I'm troubleshooting some animation no starting. Is this the correct way to use ZAZ? Install ZAZ 7.0 (This is the framework, it don't add animations itself) Install an animation package that uses the ZAZ 7.0 framework Register the new ZAZ animations to Sexlab (in "ZAZ animation package"Â menu) Use a mod to initiate the animation And ZAZ animation Pack 8+ is an animation pack. After installing it, you need to re-do the steps 2-4. Am I missing something or is this all?
yayepicyay Posted April 13, 2025 Posted April 13, 2025 Is there a way to spawn furniture items in the game? Alternatively does anyone know of a mod that sort of spreads some around the cities? Disclaimer I may be dumb and have missed something really obvious.
TrollAutokill Posted April 14, 2025 Posted April 14, 2025 7 hours ago, yayepicyay said: Is there a way to spawn furniture items in the game? Alternatively does anyone know of a mod that sort of spreads some around the cities? Disclaimer I may be dumb and have missed something really obvious. "Interact Build Decorate" on Nexus might help you. But I never used it with Zaz, maybe it'll need a patch.
Gudulba Posted April 14, 2025 Posted April 14, 2025 13 hours ago, yayepicyay said: Is there a way to spawn furniture items in the game? Alternatively does anyone know of a mod that sort of spreads some around the cities? Disclaimer I may be dumb and have missed something really obvious. For spawning, ZAP Helper Addon either with my extended version or the original version.  Ambient Slaves and/or Hydragorgon's Slave Girls add furniture with victims throughout Skyrim.
effrenatus Posted April 28, 2025 Posted April 28, 2025 Hello good people. Are there any Bodyslides for 3BAv2 ?
TrollAutokill Posted May 5, 2025 Posted May 5, 2025 13 minutes ago, quadangle said: how do you install this? I used the install mod function with mod organizer, then enabled it, then ran pandora, it even show up on mcm, but no animations play, using it with prison overhaul Try to run fnis before pandora. Then deactivate fnis. Then run Pandora.
quadangle Posted May 5, 2025 Posted May 5, 2025 I didn't realize I had a reply before deleting, whoops. I figured it out, I've been using the -tesv argument for pandora, which makes it not recognize fnis animations. the proper fix was to set the installed path registry properly so that pandora can launch without using the argument, so it reads fnis animations. I figured it out from reading this https://github.com/Monitor221hz/Pandora-Behaviour-Engine-Plus/issues/341 1
Sara Blackheart42 Posted May 6, 2025 Posted May 6, 2025 So i wasnt sure where to put ZazPatch, which is why i went into every single folder to check and i found that Zaz 7.0SE-Rev1 > Meshes > ZaZ-UltimateDataPack > ZaZ-Furniture > Single Pillory is completly empty
Sara Blackheart42 Posted May 6, 2025 Posted May 6, 2025 And i have run into another Issue: While i cannot point to the exact Version (Though at one Point i only had 8.0+ SE installed) for some Reason when having ZaZAP installed, all NPC/ my PC are A-posing (Old Saves and new Chars) (Steam Version 1.6.1170) and after going through everything i cant say for certain what the Issue is, but my best Guess would be that it somehow bites with the XP32 Skeleton, since everything works fine without ZaZAP
TrollAutokill Posted May 6, 2025 Posted May 6, 2025 1 hour ago, Sara Blackheart42 said: And i have run into another Issue: While i cannot point to the exact Version (Though at one Point i only had 8.0+ SE installed) for some Reason when having ZaZAP installed, all NPC/ my PC are A-posing (Old Saves and new Chars) (Steam Version 1.6.1170) and after going through everything i cant say for certain what the Issue is, but my best Guess would be that it somehow bites with the XP32 Skeleton, since everything works fine without ZaZAP Usually A pose means you need to rerun FNIS (outdated) or Pandora (recommended).
stalian Posted May 22, 2025 Posted May 22, 2025 why are these animations say 'NO'. does that mean they won't play? if so why?
stalian Posted May 29, 2025 Posted May 29, 2025 On 4/10/2025 at 9:52 PM, sil7373 said: Hi, so I'm new to ZAZ and I'm troubleshooting some animation no starting. Is this the correct way to use ZAZ? Install ZAZ 7.0 (This is the framework, it don't add animations itself) Install an animation package that uses the ZAZ 7.0 framework Register the new ZAZ animations to Sexlab (in "ZAZ animation package"Â menu) Use a mod to initiate the animation And ZAZ animation Pack 8+ is an animation pack. After installing it, you need to re-do the steps 2-4. Am I missing something or is this all? I think I messed up cause I only installed zaz 8 (not 8+) and some animations are playing but not all and sometimes the characters will start an animation and then snap out and just stand there or one character will snap and stand there while the other is doing their thing. so to be clear, do I install zaz 7.0 (and do I need the zaz 7 patch) then zaz 8? if so, do I uninstall zaz 8, install zaz 7 then zaz 8 and will I have to uninstall/reinstall sexlab, DOM, HSH, AYGAS, interactive BDSM, and Devious Devices? sorry but this gets confusing sometimes.
stalian Posted June 2, 2025 Posted June 2, 2025 does anyone know why this happens? this happens a lot or they just stand there and do nothing
Phoenix Fire18 Posted June 20, 2025 Posted June 20, 2025 shot in the dark but does anyone know what the furniture in this SS is , or if its from another mod, what that mod is?
Fraying9981 Posted June 23, 2025 Posted June 23, 2025 hello, I'm using OAR and it seems to be conflicting with equipped items, for example cuffs. When cuffs are equipped, the Zaz cuffed animation works well for a bit, then gets replaced by OAR idles. Anybody knows how to fix this?
TrollAutokill Posted June 23, 2025 Posted June 23, 2025 7 hours ago, Fraying9981 said: hello, I'm using OAR and it seems to be conflicting with equipped items, for example cuffs. When cuffs are equipped, the Zaz cuffed animation works well for a bit, then gets replaced by OAR idles. Anybody knows how to fix this? Edit the OAR condition files.
Fraying9981 Posted June 23, 2025 Posted June 23, 2025 (edited) 15 hours ago, TrollAutokill said: Edit the OAR condition files.  May I ask which files and how so? Afaik zaz is not OAR, it's FNIS, right? Could you develop a bit more please? Also, not related to the animation, but I'm having a CTD when I'm hovering over certain specific ZaZ items inside the inventory, such as zbf backside gold cuffs. It happens only for a few items and always results in CTD. Do you know what may be the cause?  Edit: OK I think I have a possible explanation for issue #2: the cuffs may be using these metallic textures below that are being overwritten by other mods. -> I've put ZaZ as higher priority (to winning file conflict) with both mods below, I still get the crash. Can somebody suggest a fix?   Edit 2: Here is the fix to DL   Edited June 24, 2025 by Fraying9981 1
tommy58029 Posted June 26, 2025 Posted June 26, 2025 (edited) Hello. When my female character was wearing cuffs from this mod and when I started a sex animation only the cuffed female character was moving and the other one (male or female) just stood there. I tried redoing FNIS and re-enable and re-register the animation in SLAL but no good. Any advice? I'm using the ZaZ Animation Pack+ CBBE HDT V.8.0+SE2023 Edited June 26, 2025 by tommy58029
XSupremeFrogX Posted July 3, 2025 Posted July 3, 2025 (edited) Some fixes for some immortal animals and a headsman. You can do it easily with SSEEdit  Credits to fantajoakkh lamplight   HEADSMAN Spoiler  ANIMALS Spoiler  Edited July 3, 2025 by XSupremeFrogX 1
buttonpop Posted July 6, 2025 Posted July 6, 2025 (edited) for some reason, my game keeps crashing to desktop as soon as i load a save or start a new game. disabling zaz fixes the issue. i am using version 7. when i use version 8 or 8+, i get a black screen with ambient noise instead. Edited July 6, 2025 by buttonpop
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now