Devious Devices SE

[serranna]

What are the experimental chain and tail meshes? Maybe there was something I missed? Not sure how that would effect the bone gag, though I don't know what it looks like so maybe it does. Unless the mentioned meshes came packed with the most recent AOI installer that was posted, then I do have it.

[venera1234]

Hey yall, i've got a problem with pony boots/slave high heels, I get the error message that I dont have Netimmerse Override installed. (Skyrim SE)

Read some pages on this forum and couldn't find a solution, anyone else still struggling from last year till now? (Got a clean isntall of Skyrim SE and I use MO2 if it helps).

If there are any solutions besides the video for racemenu install (with BSA extractor ect) in this topic, it didn't help, could someone redirect me to alternative fix? Thanks in advance.

[Tron91]

2 hours ago, serranna said:

What are the experimental chain and tail meshes? Maybe there was something I missed? Not sure how that would effect the bone gag, though I don't know what it looks like so maybe it does. Unless the mentioned meshes came packed with the most recent AOI installer that was posted, then I do have it.

That were the alternative to the DDHOTFIX

 

Spoiler

 

[TheEunch]

Hi Devious devices is causing all my characters to half T-pose when installed. I already ran FNIS xxl and only have 2200 animations  

 

EDIT: Fixed it, I'm just an idiot.

[HunterGuy2]

I'm trying to figure out how to run bodyslide with the AIO - when I click 'preview' it shows massive clipping, and when I move sliders it adjusts the clothes but not the body underneath. Is that expected? If I batch build, will it make everything clip in-game when equipping stuff or is that just an issue with the bodyslide previewer showing some default body instead of the actual body that would be used in game?

[Luminae]

hey, i'm having problem with some of the devices, like the fetters that are supposed to tie your feet together and the ball and chain.

 

The chains are static and separated, and the ball is just floating.

 

I tried running batch build in bodyslide but those devices doesnt seem to show up in the list.

 

btw I do have a working HDT setup 

[NicholasJMoore]

2 hours ago, Luminae said:

hey, i'm having problem with some of the devices, like the fetters that are supposed to tie your feet together and the ball and chain.

 

The chains are static and separated, and the ball is just floating.

 

I tried running batch build in bodyslide but those devices doesnt seem to show up in the list.

 

btw I do have a working HDT setup 

I had to re-run FNIS to get this to work. I'd give that a try.

[NicholasJMoore]

I'm having trouble with the "Collygon" meshes as well, similar to what serranna was indicating. If I delete the "Collygon" folder, no more crashes.  No more meshes for those items in game, but at least no more crashes. It is the only one that I am having an issue with.  I'll keep the meshes deleted and not use the items, but I thought I'd post here in the attempt to maybe find the issue.

 

All I need to do is hover over the item in my inventory and I get a CTD. Does it hit HDT xml at that point?  Maybe I missed something in the 64 pages of content (I searched and looked but found nothing)?

 

Everything else seems to be working ok within margin of inferred stability.

 

I've attached the offending mesh folder contents. Maybe if I can get a copy of this folder from someone that doesn't have this CTD when hovering over the item in inventory issue, I can compare.

 

Thanks for all the effort.

Bad Collygon Meshes.zip

[barrett1980]

On 10/3/2019 at 11:10 AM, pottman said:

This showed up in MO2, what should I do?

 

DDiUtil version 1 (DeviousDevices.dll, Devious Devices Integration) reported as incompatible during query.

 

I too have noticed this as I was just reinstalling everything after not playing for a while.  Is this an actual problem or just a warning?

[rizzuh]

I encountered some problem with DD AIO, the device hider didnt work for DD eg: when wearing chastity it just clip through cloth/armor. The hider itself is working as i tried to equip some bikini armor, and it hid the equipped slot.

 

Does anyone know how to fix 

[outcast512]

Ive managed to get this running thanks to the mega upload link that gave the All in One, but when playing with tied up my hands and feet disappear. When they used, i believe the pillory post, no post appeared. 

I know I might be missing something because I keep seeing some people talking about running sliders to make certain stuff show up, but even after grabbing someones folder and adding them to my own, no different sliders are shown in racemenu that i can see. 

Any help would be greatly appreciated as I am new to modding but this seems like so much fun to stop now. After trying by myself for a day and a half im at my wits end.

[rizzuh]

11 hours ago, outcast512 said:

Ive managed to get this running thanks to the mega upload link that gave the All in One, but when playing with tied up my hands and feet disappear. When they used, i believe the pillory post, no post appeared. 

I know I might be missing something because I keep seeing some people talking about running sliders to make certain stuff show up, but even after grabbing someones folder and adding them to my own, no different sliders are shown in racemenu that i can see. 

Any help would be greatly appreciated as I am new to modding but this seems like so much fun to stop now. After trying by myself for a day and a half im at my wits end.

Download Outfit Studio from nexus ( see the instruction on how to install there ) and build the outfit

 

Also can anyone help with DD hider not working ?

[outcast512]

2 hours ago, rizzuh said:

Download Outfit Studio from nexus ( see the instruction on how to install there ) and build the outfit

 

Also can anyone help with DD hider not working ?

I have Bodyslide and outfit studio. Im not sure how to build the outfits. 

[outcast512]

Found a video on it.

 

 

[outcast512]

Even after building the assets the pillory style post didnt show and the ball gag is slightly low in an un opened mouth.

 

[aim4it]

22 hours ago, barrett1980 said:

I too have noticed this as I was just reinstalling everything after not playing for a while.  Is this an actual problem or just a warning?

An actual problem, some of the scripting relies on an SKSE c++ extension.  There are links for the updated DLLs in the SSE conversion tracking thread, or use the AIO.

[HunterGuy2]

On 10/12/2019 at 12:22 PM, outcast512 said:

Even after building the assets the pillory style post didnt show and the ball gag is slightly low in an un opened mouth.

 

Unopened mouth - Just found the fix for this last night. look for "mfg fix" on nexus. That should also theoretically fix the ball gag being low, as opening the mouth lowers the chin. Supposedly it's because sexlab used to include this fix and recently removed it.

[HunterGuy2]

Using the AIO, I have noticed that nipple piercings float slightly higher in the air for me - my guess is it's because I am using the CBBE SMP body and the piercings aren't reacting to SMP physics, so the breasts are sagging down slightly while the piercings are staying put. Other outfits seem OK. Is this just a case of certain items not supporting SMP yet (or ever)? I wasn't sure what the current state of support was since most of the discussion I saw in this thread about SMP seemed to be about how to make things work *without* HDT.

[Hugebooblover]

Does anyone know if devious devices has been converted for Touched by Dibella yet? I've looked around and couldn't find anything, but I don't know if I'm looking in the right place.

 

I tried my had and converting them myself, but there are so many things to convert.

 

Thanks.

[Dez65]

On 10/12/2019 at 3:01 PM, aim4it said:

An actual problem, some of the scripting relies on an SKSE c++ extension.  There are links for the updated DLLs in the SSE conversion tracking thread, or use the AIO.

Hi.  I have version 1.5.80 and SKSE 2.0.16.  When I install the three separate mods using MO2, (DDa-3.0eSE.7z,  DD 4.1 SE Beta 2.7z, DDX 4.1 SE BETA 2 (2).7z), I get an incompatible plug in error, as Pottman described  in #1599.  If I use the AIO version, where I can select the runtime, I still get the same error - I've double checked and am installing runtime 1.5.80 in the AIO installation program.

 

Not sure it is related but with either approach, both the player and NPCs suddenly start bunny walking or walking like they're wearing restraints.  I use FNIS Sexy Move SE and I can change the walk for the player and she returns to normal.  I can't return the NPCs to normal though.  This problem disappears when I remove DD.

 

Any ideas?  I'm sure I must be doing something wrong.  I've checked all other mods and they are the all updated (just started a new instance after playing FO4 for a while).

[aim4it]

2 hours ago, Dez65 said:

Hi.  I have version 1.5.80 and SKSE 2.0.16.  When I install the three separate mods using MO2, (DDa-3.0eSE.7z,  DD 4.1 SE Beta 2.7z, DDX 4.1 SE BETA 2 (2).7z), I get an incompatible plug in error, as Pottman described  in #1599.  If I use the AIO version, where I can select the runtime, I still get the same error - I've double checked and am installing runtime 1.5.80 in the AIO installation program.

 

Not sure it is related but with either approach, both the player and NPCs suddenly start bunny walking or walking like they're wearing restraints.  I use FNIS Sexy Move SE and I can change the walk for the player and she returns to normal.  I can't return the NPCs to normal though.  This problem disappears when I remove DD.

 

Any ideas?  I'm sure I must be doing something wrong.  I've checked all other mods and they are the all updated (just started a new instance after playing FO4 for a while).

The easy fix is don't use FNIS Sexy Move SE since it will conflict with the alternate animations.  There is another way to clear/reset the alternated animations in Sexy Move but I'm not familiar with it.  I just use a direct walk animation replacement and save a few more animations slots in FNIS.

[mikey1979]

Hi All:

 

I just downloaded all three files and installed them using MO2. I re-generated my FNIS files and then rebuilt the DD files in Bodyslide using my custom body. I did not run into any issues during the previous steps so I started up SkyrimSE and loaded my latest and greatest saved game. After the saved game loaded my PC was already in a position to where it looked like she was being restrained with some type of harness (see below).

 

When I enable a spell, her hands assume the correct position in front of her body. When I enable a weapon, she holds the weapon in front of her as expected. But when I press the [R] key in order to sheath the weapon or disable the spell, her arms return to the restrained position as shown above.

 

This has cause caused me to come to HARD stop and I am going to disable the the three Devious Devices mods and re-run FNIS without DD and then reload my save prior to installing Devious Devices until I get  this resolved.

 

Has anyone seen this issue and/or have any ideas as to what is causing the issue?

 

Please advise................

 

 

[Aresmar299]

Having a problem, the Black Bone Gag is causing a CTD, merely touching it in the menu will cause a CTD, i have built with bodyslide, run fnis and reinstalled multiple times. Any clues guys?

[Mrod23]

2 hours ago, Aresmar299 said:

Having a problem, the Black Bone Gag is causing a CTD, merely touching it in the menu will cause a CTD, i have built with bodyslide, run fnis and reinstalled multiple times. Any clues guys?

There have been several reports of problems with the Collygon meshes (of which the Black Bone gag is one) and the workaround so far is to move or delete the collygon meshes from the DD armor folder.  I myself archived and moved them to a holding folder outside the data folder tree.  It doesn't allow you to use the Collygon items (bell collar, etc.) but it avoids the CTD when scrolling through DD selections using AddItemMenu.  Hopefully someone will fix the meshes before long.

[R4ThM0R3]

On 9/24/2019 at 1:28 PM, Squid300 said:

Edit: so I found the problem. It seems to crash if I'm using a controller. No clue why, but the struggle animations play just fine if I unplug it. Figured I'd at least post it in case it helps anyone since its a quick fix and I only happened to figure it out cause I had to unplug my controller to set some hotkeys.

Papyrus.0.log 67.89 kB · 6 downloads

Holy cow, all animations (struggle, blinded, gag) work when I unplug my controller