Fill Her Up - NetImmerse Override Compatibility Patch

[4onen]

Hello, I have a problem when I used this mod.

 

When my character or NPC are inflation, thay are glow the belly strangle like the picture.

 

https://www.dropbox.com/s/8ms0de405v17ulf/1234.jpg?dl=0

 

So how can I fix it ?

 

Thank you.

First off, awesome character!

 

Second off, to fix that issue you need either a higher-detail texture or a better-weightmapped body.

 

What's happening is that as the belly node expands, vertices the node is mapped to are being stretched outward. This stretches the polygons those vertices make up, stretching the texture mapped onto those polygons. Finally, because modern games create the illusion of depth using "normal mapping" and those normal maps are being stretched too, the belly appears to glow because the "normals" are all pointing the same direction when they should be pointing slightly different directions.

 

 

Can someone tell me how to safely uninstall this mod? Its conflicting with some of my mods. Also how to reset factors for belly node, I did everything, turn it off in game, reset factors in game, but everytime I load save my charakter gets this small belly, so instead of value 0,000 its always 1,000 (its reason why its conflicting with some of my mods). 

Yep! Your conflict is with NetImmerse Override doing its automatic updates to set your belly node. From what it sounds like, you've successfully uninstalled the FHU parts of the mod, but now you have to pull out NiO to actually return to NetImmerse node scaling for those older, incompatible mods.

 

Removing NetImmerse Override without warning or preparation shouldn't cause any problems because the old NetImmerse system will overwrite any changes NiO left behind.

 

(P.S. NetImmerse Override is an automatically included requirement of RaceMenu. If you have RaceMenu installed, you have to uninstall that to get rid of NiO. If you'd like to keep RaceMenu, you're going to have to keep NiO installed. Sorry! (Not my fault))

[qotsafan]

Yep! Your conflict is with NetImmerse Override doing its automatic updates to set your belly node. From what it sounds like, you've successfully uninstalled the FHU parts of the mod, but now you have to pull out NiO to actually return to NetImmerse node scaling for those older, incompatible mods.

 

Removing NetImmerse Override without warning or preparation shouldn't cause any problems because the old NetImmerse system will overwrite any changes NiO left behind.

 

(P.S. NetImmerse Override is an automatically included requirement of RaceMenu. If you have RaceMenu installed, you have to uninstall that to get rid of NiO. If you'd like to keep RaceMenu, you're going to have to keep NiO installed. Sorry! (Not my fault))

Actually it kind of is your fault

NiOverride has a feature, that if you name the key, like the esm/esp, if automatically uninstalls that scaling, if that esm/esp is unistalled.

[4onen]

 

Yep! Your conflict is with NetImmerse Override doing its automatic updates to set your belly node. From what it sounds like, you've successfully uninstalled the FHU parts of the mod, but now you have to pull out NiO to actually return to NetImmerse node scaling for those older, incompatible mods.

 

Removing NetImmerse Override without warning or preparation shouldn't cause any problems because the old NetImmerse system will overwrite any changes NiO left behind.

 

(P.S. NetImmerse Override is an automatically included requirement of RaceMenu. If you have RaceMenu installed, you have to uninstall that to get rid of NiO. If you'd like to keep RaceMenu, you're going to have to keep NiO installed. Sorry! (Not my fault))

Actually it kind of is your fault

NiOverride has a feature, that if you name the key, like the esm/esp, if automatically uninstalls that scaling, if that esm/esp is unistalled.

 

Yeah, but changing the key might break existing installations. Also, making sure they key matched the esm/esp name wouldn't stop NiO from performing the automatic scalings on load. (It sounds like) This particular user did clear out his FHU scaling data with the Reset Actors button, so NiO is setting the node for some other reason.

[qotsafan]

Yeah, but changing the key might break existing installations. Also, making sure they key matched the esm/esp name wouldn't stop NiO from performing the automatic scalings on load. (It sounds like) This particular user did clear out his FHU scaling data with the Reset Actors button, so NiO is setting the node for some other reason.

Oh, okay my bad then, I guess I misunderstood the situation. That's very weird, if he already cleared the scaling.

[4onen]

 

Yeah, but changing the key might break existing installations. Also, making sure they key matched the esm/esp name wouldn't stop NiO from performing the automatic scalings on load. (It sounds like) This particular user did clear out his FHU scaling data with the Reset Actors button, so NiO is setting the node for some other reason.

Oh, okay my bad then, I guess I misunderstood the situation. That's very weird, if he already cleared the scaling.

Well, he's expecting some NetImmerse mod to set the node to something less than 1.0 (0.0, I believe,) but NetImmerse Override is (heh) Overriding that and setting it to the default 1.0, probably because of some default scaling from another NiO mod like RaceMenu. (FHU doesn't scale until inflation > 1.0, and if inflation is less than 1.0 it'll remove its key from NiO.)

[MisoHappe]

I'm having a problem that someone else mentioned before, but (as far as I could tell) no one responded. I have FHU 2 and FHU 2 Beta NiO, but fore some reason, the Global Cum Amount Multiplier is stuck at 0, making the mod do nothing. I've reinstalled the mods with no results, and searched several places on the web to no avail.

 

Thanks

[m3dicat3d]

Sorry to ask, I did look/search first.

 

Do I need to install the original FHU 1.00 first, then install FHU-FCP, or just make sure I have met the requirements of the original before taking on the install of the new framework patch?

 

Also, I saw while searching that someone asked if they should install the FHU 2 Beta NIO v1.12 in addition to FHU v 2? The reply was yes.  This is the case no matter what I assume ( whether you have NIO through Racemenu or NIO standalone)?

 

Thanks!

[4onen]

Sorry to ask, I did look/search first.

 

Do I need to install the original FHU 1.00 first, then install FHU-FCP, or just make sure I have met the requirements of the original before taking on the install of the new framework patch?

 

Also, I saw while searching that someone asked if they should install the FHU 2 Beta NIO v1.12 in addition to FHU v 2? The reply was yes.  This is the case no matter what I assume ( whether you have NIO through Racemenu or NIO standalone)?

 

Thanks!

FHU 2.0 is a rewrite Srende did of FHU 1.0. FHU 1.0 is not necessary. All NiO commands used are core commands since the first version and should work regardless of whether you use the RaceMenu package or the standalone version. To use the Framework Compatibility Patch, you'll need to install FHU 2, then FHU-FCP (otherwise known as FHU 2 Beta NIO v1.12) over top of it.

 

 

 

As for the global cum modifier being stuck at 0.0, MisoHappe... I've got no fix. I've pretty much given up supporting this mod 'cause I really don't have time.

[m3dicat3d]

Thanks 4one, I'll give it a shot, and no matter how it works out, you have my thanks for your efforts!

[nath92]

Can someone tell me how to safely uninstall this mod? Its conflicting with some of my mods. Also how to reset factors for belly node, I did everything, turn it off in game, reset factors in game, but everytime I load save my charakter gets this small belly, so instead of value 0,000 its always 1,000 (its reason why its conflicting with some of my mods). 

heya i have your same problem,even if i uncheck enable belly grown it grows,and even disinstalling fhu my belly doesnt turn normal XD omg!

[nath92]

seriously i have no idea how to solve it,my belly stuck in preggo stat even with ,enable node uncheked,i have no others mod which use scale belly,so i have no idea how to reset the belly to normal,even goin in racemenu doesnt work,it keep return when i close racemenu,sorry for my eng i hope is clear what i mean XD

if someone can give me an hint,btw i use racemenu 3.4.5 which should have nioverride ,basically i have the requirement for fhu.

plus i ve reinstalled skyrim 2 days ,should be not bugged.

and can someone tell me what the enable fhu help option do?! cos i tried disabling belly grown unchecking the belly grow indeed and fhu help.

[4onen]

 

Can someone tell me how to safely uninstall this mod? Its conflicting with some of my mods. Also how to reset factors for belly node, I did everything, turn it off in game, reset factors in game, but everytime I load save my charakter gets this small belly, so instead of value 0,000 its always 1,000 (its reason why its conflicting with some of my mods). 

heya i have your same problem,even if i uncheck enable belly grown it grows,and even disinstalling fhu my belly doesnt turn normal XD omg!

 

 

Hit the reset button near the bottom of the options page. If that doesn't fix it... well, something interesting must've happened. In that case, try turning everything in FHU back on, getting inflated a bit, then resetting and turning it all off again.

 

Also, FHU's keys aren't related to its mod installation status as that'd break backward compatibility. Uninstalling FHU won't fix crap and will probably break more stuff.

seriously i have no idea how to solve it,my belly stuck in preggo stat even with ,enable node uncheked,i have no others mod which use scale belly,so i have no idea how to reset the belly to normal,even goin in racemenu doesnt work,it keep return when i close racemenu,sorry for my eng i hope is clear what i mean XD

if someone can give me an hint,btw i use racemenu 3.4.5 which should have nioverride ,basically i have the requirement for fhu.

plus i ve reinstalled skyrim 2 days ,should be not bugged.

and can someone tell me what the enable fhu help option do?! cos i tried disabling belly grown unchecking the belly grow indeed and fhu help.

Reinstalling skyrim doesn't change the save data. If you've really managed to break it to the point that the fix I'm going to give you won't work, you'll just have to start over with a new character. (Also, pretty much all versions of RaceMenu have NIOverride)

 

I don't remember there being an FHU help option.

 

Also, the minimum inflation value should be 1.0. There shouldn't be a 0.0 because inflations are multiplicative under the new NiOverride compatibility. If any mod sets the node to 0.0, no other mods will be able to modify that node.

 

Okay, here's the best troubleshooting plan I can come up with for you:

1. Install my FHU 2.0 copy, my FHU 2.0 compatibility patch, and all dependencies (You've already covered this, as you've said.)

2. Enable EVERYTHING. (This might seem counterproductive, but it'll resolve things in the long run.)

3. Have sex, wherein a penis is inserted into your character's anus or vagina. Make sure SexLab has separate orgasms disabled and play orgasm effects enabled. Make sure the orgasm effects play at the end of the animation, and that your character's belly inflates at least a little bit more. (If uninstalling FHU earlier left artefacts in the save file, this might cause the belly to snap to a smaller size.)

4. Go into your FHU options menu, scroll to the bottom of the first page, and click RESET ALL ACTORS (Or some similar bold text option.) Leave the menus. Your character's belly should now be un-inflated.

5. Disable all of the inflation settings of the mod.

6. Uninstall the mod.

 

Points of failure:

If in step 3, the belly doesn't inflate any further... Erm... crap. Try the rest, and if it doesn't shrink then continue to the second, diagnostic fix.

If in step 4, you're not un-inflated after resetting all actors, skip to the diagnostic fix. Something else is screwing with that node.

 

Fix 2: (To be performed after fix 1)

1. Install my NiOverride diagnostic tool. There's a link to it in my forum signature.

2. Wait in-game for MCM to recognize the new menu.

3. Open NiOverride diagnostic, go to the second page ("Node Selection") and enter the node "NPC Belly" without quotes.

4. Go to the last page ("Node Data") and look at the results.

 

Fix 2 points of failure:

If in step 2, MCM doesn't recognize the new menu, something else is seriously wrong with your skyrim installation and/or save file. Try the console command clearinvalidregistrations and in-game wait an hour, followed by a few minutes in real life.

If in step 3, NiO Diagnostic claims that the node "doesn't exist" or that "NiO isn't affecting it," then trust NiO diagnostic. That is literally the case. If that somehow happens, its likely that inflating your belly has jammed the HDT model in an awkward state. Ignoring it and continuing normal play should resolve the issue after a short while. Try playing animations in third person, like alchemy, smelting, killmoves, etc.

If in step 4, there are any keys listed other than FHU_MODKEY or something relating to racemenu, then this whole fiasco 8n't FHU's fault. There is, in fact, some other mod messing with scaling. Have you got SexLab Parasites installed? Estrus Chaurus? Hentai Pregnancy? Soulgem Oven III? Check those.

If in step 4, FHU_MODKEY has a "node scale" value of something greater than 1.0... try fix 1 over again. 

If in step 4, FHU_MODKEY has a "node scale" value of something less than 1.0... somehow you got your hands on a version of my compatibility patch that shouldn't exist anymore (a development version from before my first public release.) Redownload the FHU compatibility patch from LoversLab and try fix 1 again.

If in step 4, FHU_MODKEY has a "node scale" value of exactly 1.0... Well, it shouldn't, 'cause FHU is coded to erase its own modkey at 1.0 or lower inflation. Get the latest version and try fix 1 again.

 

Finally, if all this crap doesn't work, throw out the save file and start over without FHU installed in any form. In that case, some kind of daedric sex-obsessed monster is trying to eat our reality through your save file. You'll be protecting us all from the end times.

[nath92]

 

 

Can someone tell me how to safely uninstall this mod? Its conflicting with some of my mods. Also how to reset factors for belly node, I did everything, turn it off in game, reset factors in game, but everytime I load save my charakter gets this small belly, so instead of value 0,000 its always 1,000 (its reason why its conflicting with some of my mods). 

heya i have your same problem,even if i uncheck enable belly grown it grows,and even disinstalling fhu my belly doesnt turn normal XD omg!

 

 

Hit the reset button near the bottom of the options page. If that doesn't fix it... well, something interesting must've happened. In that case, try turning everything in FHU back on, getting inflated a bit, then resetting and turning it all off again.

 

Also, FHU's keys aren't related to its mod installation status as that'd break backward compatibility. Uninstalling FHU won't fix crap and will probably break more stuff.

seriously i have no idea how to solve it,my belly stuck in preggo stat even with ,enable node uncheked,i have no others mod which use scale belly,so i have no idea how to reset the belly to normal,even goin in racemenu doesnt work,it keep return when i close racemenu,sorry for my eng i hope is clear what i mean XD

if someone can give me an hint,btw i use racemenu 3.4.5 which should have nioverride ,basically i have the requirement for fhu.

plus i ve reinstalled skyrim 2 days ,should be not bugged.

and can someone tell me what the enable fhu help option do?! cos i tried disabling belly grown unchecking the belly grow indeed and fhu help.

Reinstalling skyrim doesn't change the save data. If you've really managed to break it to the point that the fix I'm going to give you won't work, you'll just have to start over with a new character. (Also, pretty much all versions of RaceMenu have NIOverride)

 

I don't remember there being an FHU help option.

 

Also, the minimum inflation value should be 1.0. There shouldn't be a 0.0 because inflations are multiplicative under the new NiOverride compatibility. If any mod sets the node to 0.0, no other mods will be able to modify that node.

 

Okay, here's the best troubleshooting plan I can come up with for you:

1. Install my FHU 2.0 copy, my FHU 2.0 compatibility patch, and all dependencies (You've already covered this, as you've said.)

2. Enable EVERYTHING. (This might seem counterproductive, but it'll resolve things in the long run.)

3. Have sex, wherein a penis is inserted into your character's anus or vagina. Make sure SexLab has separate orgasms disabled and play orgasm effects enabled. Make sure the orgasm effects play at the end of the animation, and that your character's belly inflates at least a little bit more. (If uninstalling FHU earlier left artefacts in the save file, this might cause the belly to snap to a smaller size.)

4. Go into your FHU options menu, scroll to the bottom of the first page, and click RESET ALL ACTORS (Or some similar bold text option.) Leave the menus. Your character's belly should now be un-inflated.

5. Disable all of the inflation settings of the mod.

6. Uninstall the mod.

 

Points of failure:

If in step 3, the belly doesn't inflate any further... Erm... crap. Try the rest, and if it doesn't shrink then continue to the second, diagnostic fix.

If in step 4, you're not un-inflated after resetting all actors, skip to the diagnostic fix. Something else is screwing with that node.

 

Fix 2: (To be performed after fix 1)

1. Install my NiOverride diagnostic tool. There's a link to it in my forum signature.

2. Wait in-game for MCM to recognize the new menu.

3. Open NiOverride diagnostic, go to the second page ("Node Selection") and enter the node "NPC Belly" without quotes.

4. Go to the last page ("Node Data") and look at the results.

 

Fix 2 points of failure:

If in step 2, MCM doesn't recognize the new menu, something else is seriously wrong with your skyrim installation and/or save file. Try the console command clearinvalidregistrations and in-game wait an hour, followed by a few minutes in real life.

If in step 3, NiO Diagnostic claims that the node "doesn't exist" or that "NiO isn't affecting it," then trust NiO diagnostic. That is literally the case. If that somehow happens, its likely that inflating your belly has jammed the HDT model in an awkward state. Ignoring it and continuing normal play should resolve the issue after a short while. Try playing animations in third person, like alchemy, smelting, killmoves, etc.

If in step 4, there are any keys listed other than FHU_MODKEY or something relating to racemenu, then this whole fiasco 8n't FHU's fault. There is, in fact, some other mod messing with scaling. Have you got SexLab Parasites installed? Estrus Chaurus? Hentai Pregnancy? Soulgem Oven III? Check those.

If in step 4, FHU_MODKEY has a "node scale" value of something greater than 1.0... try fix 1 over again. 

If in step 4, FHU_MODKEY has a "node scale" value of something less than 1.0... somehow you got your hands on a version of my compatibility patch that shouldn't exist anymore (a development version from before my first public release.) Redownload the FHU compatibility patch from LoversLab and try fix 1 again.

If in step 4, FHU_MODKEY has a "node scale" value of exactly 1.0... Well, it shouldn't, 'cause FHU is coded to erase its own modkey at 1.0 or lower inflation. Get the latest version and try fix 1 again.

 

Finally, if all this crap doesn't work, throw out the save file and start over without FHU installed in any form. In that case, some kind of daedric sex-obsessed monster is trying to eat our reality through your save file. You'll be protecting us all from the end times.

 

heya thx 4 all your effort,thx too u i think it solved,i did all the steps u mentioned,it seems 2 days ago when i reinstalled skyrim,i ve also downloaded the new version of psq 3.2.7 ,with your diagnostic tool,seems all the belly are 2 lines full of zero's fhu and sgo keys,the last lines is set to 1.0,but the third voice psq node have the last line set to 8.5,even if enably belly is disabled,indeed i checked the change log and seeems the author changed how the nioverride scale belly with psq,so at this point probably i have to decide if keep psq or fhu,thats a bit drammatic choose,cos my gameplay is based on psq,with mil mod economy,ineed,and hormones sides quest to become succu,thats very pity cos i think your fhu mod fit 100% wit hpsq might u both author should do fix it ,both mods will be cool togheter. ^^

[4onen]

 

 

 

Can someone tell me how to safely uninstall this mod? Its conflicting with some of my mods. Also how to reset factors for belly node, I did everything, turn it off in game, reset factors in game, but everytime I load save my charakter gets this small belly, so instead of value 0,000 its always 1,000 (its reason why its conflicting with some of my mods). 

heya i have your same problem,even if i uncheck enable belly grown it grows,and even disinstalling fhu my belly doesnt turn normal XD omg!

 

 

Hit the reset button near the bottom of the options page. If that doesn't fix it... well, something interesting must've happened. In that case, try turning everything in FHU back on, getting inflated a bit, then resetting and turning it all off again.

 

Also, FHU's keys aren't related to its mod installation status as that'd break backward compatibility. Uninstalling FHU won't fix crap and will probably break more stuff.

seriously i have no idea how to solve it,my belly stuck in preggo stat even with ,enable node uncheked,i have no others mod which use scale belly,so i have no idea how to reset the belly to normal,even goin in racemenu doesnt work,it keep return when i close racemenu,sorry for my eng i hope is clear what i mean XD

if someone can give me an hint,btw i use racemenu 3.4.5 which should have nioverride ,basically i have the requirement for fhu.

plus i ve reinstalled skyrim 2 days ,should be not bugged.

and can someone tell me what the enable fhu help option do?! cos i tried disabling belly grown unchecking the belly grow indeed and fhu help.

*snip*

 

heya thx 4 all your effort,thx too u i think it solved,i did all the steps u mentioned,it seems 2 days ago when i reinstalled skyrim,i ve also downloaded the new version of psq 3.2.7 ,with your diagnostic tool,seems all the belly are 2 lines full of zero's fhu and sgo keys,the last lines is set to 1.0,but the third voice psq node have the last line set to 8.5,even if enably belly is disabled,indeed i checked the change log and seeems the author changed how the nioverride scale belly with psq,so at this point probably i have to decide if keep psq or fhu,thats a bit drammatic choose,cos my gameplay is based on psq,with mil mod economy,ineed,and hormones sides quest to become succu,thats very pity cos i think your fhu mod fit 100% wit hpsq might u both author should do fix it ,both mods will be cool togheter. ^^

 

You don't have to decide -- that's the power of NiOverride. Multiple NiOverride mods can work together at the same time without having any real effect on each other in any way except visually. I use Soulgem Oven III, FHU, and Pearl Juice, all at the same time. Literally, all affecting the same node at the same moment, sometimes even with Sexlab Parasites doing a thing.

 

So yes, both mods _are_ cool together. They don't conflict. The issue you had was that psq was mis-configured and causing inflation of its own. 

 

Go ahead and use them together if you think they're cool. Really, there's no conflict. Use them both. (Just don't uninstall either of them with inflation happening.)

[nath92]

 

 

 

 

Can someone tell me how to safely uninstall this mod? Its conflicting with some of my mods. Also how to reset factors for belly node, I did everything, turn it off in game, reset factors in game, but everytime I load save my charakter gets this small belly, so instead of value 0,000 its always 1,000 (its reason why its conflicting with some of my mods). 

heya i have your same problem,even if i uncheck enable belly grown it grows,and even disinstalling fhu my belly doesnt turn normal XD omg!

 

 

Hit the reset button near the bottom of the options page. If that doesn't fix it... well, something interesting must've happened. In that case, try turning everything in FHU back on, getting inflated a bit, then resetting and turning it all off again.

 

Also, FHU's keys aren't related to its mod installation status as that'd break backward compatibility. Uninstalling FHU won't fix crap and will probably break more stuff.

seriously i have no idea how to solve it,my belly stuck in preggo stat even with ,enable node uncheked,i have no others mod which use scale belly,so i have no idea how to reset the belly to normal,even goin in racemenu doesnt work,it keep return when i close racemenu,sorry for my eng i hope is clear what i mean XD

if someone can give me an hint,btw i use racemenu 3.4.5 which should have nioverride ,basically i have the requirement for fhu.

plus i ve reinstalled skyrim 2 days ,should be not bugged.

and can someone tell me what the enable fhu help option do?! cos i tried disabling belly grown unchecking the belly grow indeed and fhu help.

*snip*

 

heya thx 4 all your effort,thx too u i think it solved,i did all the steps u mentioned,it seems 2 days ago when i reinstalled skyrim,i ve also downloaded the new version of psq 3.2.7 ,with your diagnostic tool,seems all the belly are 2 lines full of zero's fhu and sgo keys,the last lines is set to 1.0,but the third voice psq node have the last line set to 8.5,even if enably belly is disabled,indeed i checked the change log and seeems the author changed how the nioverride scale belly with psq,so at this point probably i have to decide if keep psq or fhu,thats a bit drammatic choose,cos my gameplay is based on psq,with mil mod economy,ineed,and hormones sides quest to become succu,thats very pity cos i think your fhu mod fit 100% wit hpsq might u both author should do fix it ,both mods will be cool togheter. ^^

 

You don't have to decide -- that's the power of NiOverride. Multiple NiOverride mods can work together at the same time without having any real effect on each other in any way except visually. I use Soulgem Oven III, FHU, and Pearl Juice, all at the same time. Literally, all affecting the same node at the same moment, sometimes even with Sexlab Parasites doing a thing.

 

So yes, both mods _are_ cool together. They don't conflict. The issue you had was that psq was mis-configured and causing inflation of its own. 

 

Go ahead and use them together if you think they're cool. Really, there's no conflict. Use them both. (Just don't uninstall either of them with inflation happening.)

 

yes u right i feel kinda relief atm,for some reason my belly now is normal,i tweaked something i nhormones nioverride,like dont manage belly etc ,and now everything looks fine,crossing fingers i hope it will remain like that,have a good day,and loving your mod XD

[Monkito]

Hey, have a question.
So, if i understand it right i need fill her up 1.0 - than the 2.0 - 9.7 file , and than the beta nio release ? Or is the beta nio release not necessary ?

[4onen]

Hey, have a question.

So, if i understand it right i need fill her up 1.0 - than the 2.0 - 9.7 file , and than the beta nio release ? Or is the beta nio release not necessary ?

Nope. Having FHU 1.0 will break it. Put the FHU 2.0-9 file, then the beta NiO release. You just need those two -- you need both -- and in that order. 2.0-9, then beta NiO release.

[Monkito]

Ah ok, thanks.

[Marauderrr]

Thanks for your work on this, 4onen.

 

I guess you're no longer updating this, and not sure if anyone was going to do so, but I just wanted to put an idea out there:

 

I usually disable the slowdown effect from inflation because I have a few mods that do that.

This results in moving really really slow, which I am not a big fan of.

 

Could there be a trip effect applied while fighting....the db is thrown off balance due to inflation? The tripping chance would increase as the inflation increased?  Maybe with the same animation as tripping from leg cuffs?

 

Or any other effects that anyone could think of? Just trying to come up with some other ideas here.

 

Any thoughts?

 

 

[daedrasp]

Question. I using FHU 2.09b. And want to know motion in this mod use.

How call this motions by playidle code?

I like orgasm with boob massage so want to see often.

[LLCNC]

I've tried using this with some hdt setups and different bodies, but to no avail...can anyone give me some suggestions for 1. what body mod to install, 2. what HDT set up to use?

[4onen]

Thanks for your work on this, 4onen.

 

I guess you're no longer updating this, and not sure if anyone was going to do so, but I just wanted to put an idea out there:

 

I usually disable the slowdown effect from inflation because I have a few mods that do that.

This results in moving really really slow, which I am not a big fan of.

 

Could there be a trip effect applied while fighting....the db is thrown off balance due to inflation? The tripping chance would increase as the inflation increased?  Maybe with the same animation as tripping from leg cuffs?

 

Or any other effects that anyone could think of? Just trying to come up with some other ideas here.

 

Any thoughts?

I have no idea how to implement that, soz. I've pretty much given up on getting any more Skyrim work done, as the work that I did was pretty basic anyway and still took days.

 

Question. I using FHU 2.09b. And want to know motion in this mod use.

 

 

How call this motions by playidle code?

I like orgasm with boob massage so want to see often.

I literally don't know. I never touched the animation side of FHU.

 

I've tried using this with some hdt setups and different bodies, but to no avail...can anyone give me some suggestions for 1. what body mod to install, 2. what HDT set up to use?

I use All-In-One HDT Pussy. Follow that guide and it should work out okay for the ladies. For guys... it takes some serious poking around that I don't remember how to do.

[LLCNC]

 

Thanks for your work on this, 4onen.

 

I guess you're no longer updating this, and not sure if anyone was going to do so, but I just wanted to put an idea out there:

 

I usually disable the slowdown effect from inflation because I have a few mods that do that.

This results in moving really really slow, which I am not a big fan of.

 

Could there be a trip effect applied while fighting....the db is thrown off balance due to inflation? The tripping chance would increase as the inflation increased?  Maybe with the same animation as tripping from leg cuffs?

 

Or any other effects that anyone could think of? Just trying to come up with some other ideas here.

 

Any thoughts?

I have no idea how to implement that, soz. I've pretty much given up on getting any more Skyrim work done, as the work that I did was pretty basic anyway and still took days.

 

Question. I using FHU 2.09b. And want to know motion in this mod use.

 

 

How call this motions by playidle code?

I like orgasm with boob massage so want to see often.

I literally don't know. I never touched the animation side of FHU.

 

I've tried using this with some hdt setups and different bodies, but to no avail...can anyone give me some suggestions for 1. what body mod to install, 2. what HDT set up to use?

I use All-In-One HDT Pussy. Follow that guide and it should work out okay for the ladies. For guys... it takes some serious poking around that I don't remember how to do.

 

I'm using All-in-one as well, but there doesn't seem to be collision bulging, nor is there any inflation, I'm not sure what I'm wrong.

[deadra_56]

I have a little issue with the mod: the "cum amount multiplier" resets to 0 everytime I close the MCM menu, and I can't find a way to solve this problem. I saw on another post that it was due to the "Fill Them Up" quest, but even when I desactivate it, I still have this problem. Anyone has a solution, please?

[Rin-Kin]

 

Hey, have a question.

So, if i understand it right i need fill her up 1.0 - than the 2.0 - 9.7 file , and than the beta nio release ? Or is the beta nio release not necessary ?

Nope. Having FHU 1.0 will break it. Put the FHU 2.0-9 file, then the beta NiO release. You just need those two -- you need both -- and in that order. 2.0-9, then beta NiO release.

 

Should i uninstall FHU 1.0 brfore i install your version?

FillHerUp-v2.00-9.7z contains FillHerUp and FillThemUp.

Do i need both of them installed before i apply FillHerUp 2 Beta NIO release 1.12.7z ?