Soulgem Oven III

[NicoleDragoness]

I, instead, am a bit confused.

 

While I was using SGO2 and I went pregnant, my belly growed as expected, with a nice visual.

Since I upgraded (clean save) to SGO3, with the same exact bodymesh, bodytextures and so on, even if I'm carrying 6 gems and I'm at 30% of completed pregnancy, my belly seems to be always flat.

In both 2 and 3 versions I set the belly to be 2.80 x and breast to be 1.80 x.

My breast visually grows right, my belly not.

The same happens to the pregnant NPC females I'm tracking.

 

And I don't know nor understand why.

 

[chajapa]

I, instead, am a bit confused.

 

While I was using SGO2 and I went pregnant, my belly growed as expected, with a nice visual.

Since I upgraded (clean save) to SGO3, with the same exact bodymesh, bodytextures and so on, even if I'm carrying 6 gems and I'm at 30% of completed pregnancy, my belly seems to be always flat.

In both 2 and 3 versions I set the belly to be 2.80 x and breast to be 1.80 x.

My breast visually grows right, my belly not.

The same happens to the pregnant NPC females I'm tracking.

 

And I don't know nor understand why.

 

In SGO3, try belly at 4.5 and see if you get belly growth. You may have to wait an in-game hour after you change it.

[NicoleDragoness]

Thank you a lot, chajapa.

I wasn't aware there is a so big difference in the scaling setting between SGO2 and SGO3.

I set 4.5 and the belly, after a while, started to be visible and growing. With this value in SGO2 I had a belly like a Whale.

[chajapa]

Thank you a lot, chajapa.

I wasn't aware there is a so big difference in the scaling setting between SGO2 and SGO3.

I set 4.5 and the belly, after a while, started to be visible and growing. With this value in SGO2 I had a belly like a Whale.

 

Darkconsole is doing "math magic"

 

There is a mathematical "curve" to the calculations for scaling. The belly starts out slow, I think and then has bigger "steps" as it grows.

 

For the breasts, I notice when a breastfeeding animation plays, they hardly go down in size at all in the beginning, but go down in size much fast as the milking progresses.

[chajapa]

I like the menu speed better on this new version. The original was cool for effect, but it seems more convenient to use now.

 

Would still like to see the milk slider (number of milks) go to 10 instead of 9. Not sure why... other than the fact that 9 seems like an odd number (see what I did there?)

 

 

[chajapa]

Hmmm...... overwrite install. Previous version 008, overwritten by 009.

 

Character level 1 in Riverwood, new follower install, fertility bonus disabled, pregnancy chance set at 100%

 

She doesn't get pregnant.

 

Going to try again.

 

** EDIT **

Tried again only this time I used a cleaned save and fresh install.

Pregnancy chance set to 100%. Fucked Sigrid. She didn't get pregnant.

 

Fucked that same follower as in original post here.

She didn't get pregnant.

Used a semen bottle on her.

THAT got her pregnant.

Fucked her again.... incubating another gem.

Fucked her again (she really likes me)... no additional gem.

 

Something change in the pregnancy stuff?

 

[-alpha-]

I was wondering if it is possible to somehow incorporate the filled balls to increase pregnancy chance.

 

Like for eg.

Lets say your balls have 3 shots in them, maybe that can increase the preg chance by another 30% or something.

Then it after you blow load 1 it removes 1 semen from your balls reducing the bonus to 20% and on.

This doesnt have to apply to all NPC's maybe just the PC.

 

I thought it would be a cool way of milking yourself in an immersive way while still leaving the option of milking other males NPC's.

It was always seemed a bit odd that even after banging my slave/followers/wife/maid/prostitute/jarl/beggar/bandit and dog, that I'd still need to rub one out.

[terrorofmorrowind]

 

 

 

I have some bad news. I did what clifton suggested me to solve my "random npc not having a belly or breadtchange" which was upgradig to xpmse 3 and racemenu 3.4. but sadly nothing seemed to work. It still only happens with the named npc's. I posted my load order somewhere before so maybe someone could take a look into? Maybe i did install mods that messed with nio somehow? I don't know since i'm using these mods since 6 months ago and they never changed until i updated sexlab.

 

edit: the only thing that still remains is disabling every mod (besides the core ones) and check if it really isn't a mod that's doing this.

now that you've done that look at the mcm and it'll tell you if that's your problem --remember that's the Only reason for suggesting version 3 in the first place--I got this working with 2.8

 

 

It says that i have everything (well, that's what i think it says from the "you just made it" lines). It's why i posted this in the first place.

 

screenshot then, when it says you barely made it, there's usually atleast 1 line that shows what's wrong Or left blank

it'll say "ok" when it's good

 

 

Everything is crossed in which usually means that it is ok. Btw how do you make a screenshot again? Kind of a noob when it comes to that.

 

Hmmm...... overwrite install. Previous version 008, overwritten by 009.

 

Character level 1 in Riverwood, new follower install, fertility bonus disabled, pregnancy chance set at 100%

 

She doesn't get pregnant.

 

Going to try again.

 

I'm going to bet that it might solve my issues lol

[darkconsole]

Every version of ZAP from 6.04 and up may have some issues with SexLab 1.60HF2 (and maybe also with DD, not sure).

I suggest you to use v. 6.07 anyway.

 

 

 

I, instead, am a bit confused.

 

While I was using SGO2 and I went pregnant, my belly growed as expected, with a nice visual.

Since I upgraded (clean save) to SGO3, with the same exact bodymesh, bodytextures and so on, even if I'm carrying 6 gems and I'm at 30% of completed pregnancy, my belly seems to be always flat.

In both 2 and 3 versions I set the belly to be 2.80 x and breast to be 1.80 x.

My breast visually grows right, my belly not.

The same happens to the pregnant NPC females I'm tracking.

 

And I don't know nor understand why.

 

In SGO3, try belly at 4.5 and see if you get belly growth. You may have to wait an in-game hour after you change it.

 

 

 

 

Thank you a lot, chajapa.

I wasn't aware there is a so big difference in the scaling setting between SGO2 and SGO3.

I set 4.5 and the belly, after a while, started to be visible and growing. With this value in SGO2 I had a belly like a Whale.

 

Darkconsole is doing "math magic"

 

There is a mathematical "curve" to the calculations for scaling. The belly starts out slow, I think and then has bigger "steps" as it grows.

 

For the breasts, I notice when a breastfeeding animation plays, they hardly go down in size at all in the beginning, but go down in size much fast as the milking progresses.

 

 

i've noticed in general that NiO values (which are legit mutipliers by default) seem to yield less results than their netimmerse old version, meaning yeah you have to crank it up. im running belly 8.0 breasts 3.5 on my uunp special. and then the curve math for volume simulation, but that wouldn't ramp so hard at 2.8 compared to 4.0 etc.

[CliftonJD]

 

 

 

 

I have some bad news. I did what clifton suggested me to solve my "random npc not having a belly or breadtchange" which was upgradig to xpmse 3 and racemenu 3.4. but sadly nothing seemed to work. It still only happens with the named npc's. I posted my load order somewhere before so maybe someone could take a look into? Maybe i did install mods that messed with nio somehow? I don't know since i'm using these mods since 6 months ago and they never changed until i updated sexlab.

 

edit: the only thing that still remains is disabling every mod (besides the core ones) and check if it really isn't a mod that's doing this.

now that you've done that look at the mcm and it'll tell you if that's your problem --remember that's the Only reason for suggesting version 3 in the first place--I got this working with 2.8

 

 

It says that i have everything (well, that's what i think it says from the "you just made it" lines). It's why i posted this in the first place.

 

screenshot then, when it says you barely made it, there's usually atleast 1 line that shows what's wrong Or left blank

it'll say "ok" when it's good

 

 

Everything is crossed in which usually means that it is ok. Btw how do you make a screenshot again? Kind of a noob when it comes to that.

 

Hmmm...... overwrite install. Previous version 008, overwritten by 009.

 

Character level 1 in Riverwood, new follower install, fertility bonus disabled, pregnancy chance set at 100%

 

She doesn't get pregnant.

 

Going to try again.

 

I'm going to bet that it might solve my issues lol

 

for screenshots I've found the best way is to use the windows snipping tool - start menu type in snipping tool and click that

next alt-tab to skyrim, then alt-taqb back to snipping tool and choose new - window snip

-note that it works best if you switch skyrim to window mode

-if that checks out that'll be good we can move onto figure out what's overwriting the meshes or the xml's and know that nilo and xpmse are both good

[darkconsole]

or you can just push F12 to tell steam to do its one job (take screenshots)

[CliftonJD]

or you can just push F12 to tell steam to do its one job (take screenshots)

does that still work with the mcm screen, he's trying to ss the xpmse mcm for debug help

[Nephenee13]

 

or you can just push F12 to tell steam to do its one job (take screenshots)

does that still work with the mcm screen, he's trying to ss the xpmse mcm for debug help

 

 

It works literally anywhere

[darkconsole]

 

It works literally anywhere

 

[CliftonJD]

 

 

It works literally anywhere

 

 

[chajapa]

Definitely seems to be something jinky going on with the chance of pregnancy.

 

I upgraded 2 other profiles 008 to 009 and with preg chance at 100%, having sex does not result in another gem incubating 100% of the time. 

 

When I go into the wheel menu and look at an NPCs fertility, how do I read that number?

 

Example: Fertility is 1.500000x

 

That was with preg chance at 100%, fertility cycle off, but its slider maxed.

 

 

[CliftonJD]

i'm noticing that 6 gems in the oven doesn't produce 6 gems when giving birth, but 5

[chajapa]

first one is just a primer?

 

 

[CliftonJD]

first one is just a primer?

 

lol

[Pinute]

Well. Here we are. Thanks for switching over so quickly. I worry about some of the less traveled mods.

[Guest HeavyArmorAssassin]

 

All Jugs of Milk heal for 200 health/stamina/magicka, as well as provide the following racist powers.

 

I think you mean "racial" haha.

[sdflame]

Is a little bit weird for me.. initial installing was fine but after restart skyrim and reload the game only inseminate thru menu working but it doesn't works by having sex and the debugging msg not coming out even though debugging is enable.

 

Same issue happen when I start a new game , save and reload again... so I guess doesn't really related to save file

[terrorofmorrowind]

I was wondering. Does it matter where you put an .esm file in your load order? From what i understood it only affects .esp files but not .esm's. Just throwing that out here. i'm still trying to fix my wench body issue.

 

edit: ok, it think (yes i have said that a lot now sorry) i have way too many script intensive mods installed which is why i believe it is literally being drowned from all sides as soon as i step out of a building with LAL. It might also help that iwould use the newest soulgem oven 3 mod but i thought if i can't get the old one to work then i won't get the others to work as well. I probably just have to tur off this mod in MCM BEFORE i let LAL do anything and maybe then it probably will be able to do anything.

 

Btw does it also help turning this mod into a .esp again like the older ones so that it would get accessed faster by putting it in the lowest slot? I remember having just as many mods i have now with the older one and actually worked faster than this one despite the cloak load it had.

 

ok, here are some extra tips who can only get to work half the time like me (fixed i think temporarily, am testing in more lagfesty area's now).

 

- make sure to put the .esm at the bottom of your esm files, i don't think it really matters but you never know.

- make sure you don't have too many heavy scripted modslying around that all trigger at the same time. It's easy for sgo to get excluded for the party if this happens. It looks like just deleting 1 or two different might do the trick.

-check your load order on any mods that might conflict with each order. I had three mods that allowed me to rape people. I got rid of 1 of them and turned the rape option for the other one off as it had many more features to it.

-Make sure that if you do use heavy scripted mods, mke them run on low performance settings if possible.

-Maybe not important for this but clean your master vanilla esm's (vanilla+DLC's). It seemed to upped the fps a bit. script handling runs a lot better too.

-Make sure you have your mods in the right order. Mods like skyUi should be on top next with racemenu and schlongs for example. Any mod that is very light belongs here. Only the heavier one should be at the bottom.

-Check with tesVedit if you have any conflicts (can be done by selecting everything and choose "apply for cleaning" option, takes a long time to load all of them too).

 

I hope these are of value for someone. If not they still count as the common rules of modding.

 

I really hope this was the last time to bother you Guy's. Next time i'm posting here it will be about something else, promised

[darkconsole]

 

 It might also help that iwould use the newest soulgem oven 3 mod but i thought if i can't get the old one to work then i won't get the others to work as well. I probably just have to tur off this mod in MCM BEFORE i let LAL do anything and maybe then it probably will be able to do anything.

 

that logic is flawed to fuck. SGO3 is like 794% more efficient and script lighter than SGO2.

[Yuni]

New version is great. I'm just really curious what this coming-up milking harness will be, I'm guessing it's going to be part of Display Model 2 or something, I loved the milking equipment in Economy, so this excites me. c: *wiggle* Gonna drop any hints on what the harness is all about, Dark?