SexLab Aroused eXtended

[alex77r4]

15 minutes ago, effrenatus said:

I will consider to maybe remove that mod if it gets too annoying. But as i understand, it does not cause relevant script lag due to the parallel processing...

 

As i said a lot of times, the Stack Dump's are totally harmless and can't cause any kind of problem in the game.

Maybe a small frame drop when generate a really giant Stack Dump with thousands and thousands of accumulated scripts. 

But not cause CTD, not damage the saved game and not break the scripts. Are only a Warning to the developer about a Spike of work in the Script Engine.

 

When that Spike is big, really big, can mean a problem in a script of a bad mod and must be investigated, analyzed and reported.

But when the Spike is small or punctual can be ignored without any problem.

 

The Script Engine can run hundreds and hundreds of simultaneous scripts without any problem. For that i make my version of SLAX.

[Zizzyy]

SE version?

[safado]

19 hours ago, Zizzyy said:

SE version?

 

 

SLAX-ASA3 version, should work with any Skyrim. Is stand alone, not a patch. Remove any other SLAX, SLA or SLAR like.  Nothing overwrite it because there are no patches for this version, is compatible but different from any other SLAR..

Works with PapyrusUtils functions instead of custom DLL, also has SLAX features + patches included.

Edited December 19, 2024 by safado

[angrykiwi]

Is there a way to add other keywords to SLAX (for example other ones from baka or yps)? Judging by mcm i'd assume it's not as easy as with OSL

[ebbluminous]

48 minutes ago, angrykiwi said:

Is there a way to add other keywords to SLAX (for example other ones from baka or yps)? Judging by mcm i'd assume it's not as easy as with OSL

This adds them in for a load of mods

https://www.nexusmods.com/skyrimspecialedition/mods/106672

[Nymra]

So for some time now I have the issue of SCHLONGS bending down/going soft after orgasm in small steps.

This is so annoying I cannot even describe it in words 
 

ISSUE 1:
Schlong losing its erect state on Orgasm/after transition to final sex stage, clipping and breaking immersion in Sex Animations.

 

ISSUE 2: 

NPC prematurely dressing again even when the Sexlab Scene is still running.

 

I m on LE with old Sexlab 1,62. and also using this:

SexLab Utility Plus v20240407

SexLab Aroused SLAX ASA3 
Cumshot 2.3
Cumshot Fix by OsmelMC

What I want is for the fucking schlongs to stay rock hard until the Sexlab animation is over, the can go flaccid after that, I dont care 

I tried swapping out Sexlab Aroused Versions and play with the settings, but to no avail....  any ideas? 

[Whizkid]

6 minutes ago, Nymra said:

So for some time now I have the issue of SCHLONGS bending down/going soft after orgasm in small steps.

This is so annoying I cannot even describe it in words 
 

ISSUE 1:
Schlong losing its erect state on Orgasm/after transition to final sex stage, clipping and breaking immersion in Sex Animations.

 

ISSUE 2: 

NPC prematurely dressing again even when the Sexlab Scene is still running.

 

I m on LE with old Sexlab 1,62. and also using this:

SexLab Utility Plus v20240407

SexLab Aroused SLAX ASA3 
Cumshot 2.3
Cumshot Fix by OsmelMC

What I want is for the fucking schlongs to stay rock hard until the Sexlab animation is over, the can go flaccid after that, I dont care 

I tried swapping out Sexlab Aroused Versions and play with the settings, but to no avail....  any ideas? 

i think its happening for the newer aroused slax versions, i did experience this and i just switch back to the old original aroused version and it seems to fix this bug, not sure why it happens but it seems to happen after playing for sometime and when it happens the savegame is corrupted even if u revert back to the original version.. a new start game using the original version seems to fix it.. baka version also works....

Edited March 7, 2025 by Whizkid

[Nymra]

18 minutes ago, Whizkid said:

i think its happening for the newer aroused slax versions, i did experience this and i just switch back to the old original aroused version and it seems to fix this bug, not sure why it happens but it seems to happen after playing for sometime and when it happens the savegame is corrupted even if u revert back to the original version.. a new start game using the original version seems to fix it.. baka version also works....

 

Do you have by any chance Sexlab Cumshot mod with CumShot fix by OsmelMC? 
I just had that idea that I added this too and it resets schlong state after cumming... Removed that shit and it seems to have fixed the issue. 
I was really starting to wonder that 3 versions of Sexlab Aroused can have the same shit going on.  Apart from NO version of aroused is in any way comprehensible in its MCM settings.... what a mess .

 

[Whizkid]

8 hours ago, Nymra said:

 

Do you have by any chance Sexlab Cumshot mod with CumShot fix by OsmelMC? 
I just had that idea that I added this too and it resets schlong state after cumming... Removed that shit and it seems to have fixed the issue. 
I was really starting to wonder that 3 versions of Sexlab Aroused can have the same shit going on.  Apart from NO version of aroused is in any way comprehensible in its MCM settings.... what a mess .

 

i am using Sexlab - Cum Overlays 2.8 and Cumshot v2.3 i dont think i used Cumshot fix by OsmelMC, i have not been playing skyrim for quite a long time skyrim LE hard had any updates... 

 

idk from past experiences i tried alot of stuff and nothing works.. as this problem appears after a while.. going back to the older versions and this bug never happened at all, LE isnt that stable lmao some of these fixes create problems with draugr too.

[Nymra]

On 10/23/2024 at 12:10 AM, alex77r4 said:

 

As i said a lot of times, the Stack Dump's are totally harmless and can't cause any kind of problem in the game.

Maybe a small frame drop when generate a really giant Stack Dump with thousands and thousands of accumulated scripts. 

But not cause CTD, not damage the saved game and not break the scripts. Are only a Warning to the developer about a Spike of work in the Script Engine.

 

When that Spike is big, really big, can mean a problem in a script of a bad mod and must be investigated, analyzed and reported.

But when the Spike is small or punctual can be ignored without any problem.

 

The Script Engine can run hundreds and hundreds of simultaneous scripts without any problem. For that i make my version of SLAX.

 

After installing your SAR 3 I experienced heavy lag spikes every 3 seconds or so ( I am on LE)

Disabling Arousal calculation in the MCM did not change this. 

 

I had Sexlab Aroused Modular installed previously and suspected it to missbehave, so I thought I try your mod.

I m in a cell with only 3 NPC (2 are my followers) and my FPS drop constantly by 50-60, coinciding with this log entry:

 

Quote

[03/10/2025 - 07:54:10PM] Error: Cannot set the faction rank with a None faction
stack:
    [ (00000014)].Actor.SetFactionRank() - "<native>" Line ?
    [sla_Framework (0804290F)].slaUtilScr.GetActorFatigue() - "slaframeworkscr.psc" Line 304
    [sla_Framework (0804290F)].slaUtilScr.GetActorArousal() - "slaframeworkscr.psc" Line 1019
    <unknown self>._fwb_sla.GetArousal() - "_fwb_sla.psc" Line 17
    [_fwb_modifiers (0000502D)]._fwb_modifiers.UpdateSlaValues() - "_fwb_modifiers.psc" Line 3173
    [_fwb_modifiers (0000502D)]._fwb_modifiers.ReadPlayerState() - "_fwb_modifiers.psc" Line 1142
    [_fwb_modifiers (0000502D)]._fwb_modifiers.OnUpdate() - "_fwb_modifiers.psc" Line ?
[03/10/2025 - 07:54:11PM] SLAX ASA - Data for Actor:[Actor < (00000014)>] called:Sarana GetActorDaysSinceLastOrgasm:0.127613 from StorageUtil
[03/10/2025 - 07:54:17PM] SLAX - GetActorExposure BEGIN Sarana is 0.000000
[03/10/2025 - 07:54:17PM] SLAX - GetActorExposure END   Sarana returns 0.000000
[03/10/2025 - 07:54:18PM] SLAX ASA - Data for Actor:[Actor < (00000014)>] called:Sarana GetActorDaysSinceLastOrgasm:0.129288 from StorageUtil
[03/10/2025 - 07:54:18PM] SLAX ASA - Data for Actor:[Actor < (00000014)>] called:Sarana GetActorDaysSinceLastOrgasm:0.129326 from StorageUtil
[03/10/2025 - 07:54:18PM] SLAX ASA - Data for Actor:[Actor < (00000014)>] called:Sarana GetActorDaysSinceLastOrgasm:0.129341 from StorageUtil
[03/10/2025 - 07:54:18PM] Error: Cannot set the faction rank with a None faction
stack:
    [ (00000014)].Actor.SetFactionRank() - "<native>" Line ?
    [sla_Framework (0804290F)].slaUtilScr.GetActorFrustration() - "slaframeworkscr.psc" Line 342
    [sla_Framework (0804290F)].slaUtilScr.GetActorArousal() - "slaframeworkscr.psc" Line 1019
    <unknown self>._fwb_sla.GetArousal() - "_fwb_sla.psc" Line 17
    [_fwb_modifiers (0000502D)]._fwb_modifiers.UpdateSlaValues() - "_fwb_modifiers.psc" Line 3173
    [_fwb_modifiers (0000502D)]._fwb_modifiers.ReadPlayerState() - "_fwb_modifiers.psc" Line 1142
    [_fwb_modifiers (0000502D)]._fwb_modifiers.OnUpdate() - "_fwb_modifiers.psc" Line ?
[03/10/2025 - 07:54:18PM] SLAX ASA - Data for Actor:[Actor < (00000014)>] called:Sarana GetActorDaysSinceLastOrgasm:0.129360 from StorageUtil
[03/10/2025 - 07:54:18PM] Error: Cannot set the faction rank with a None faction
stack:
    [ (00000014)].Actor.SetFactionRank() - "<native>" Line ?
    [sla_Framework (0804290F)].slaUtilScr.GetActorFatigue() - "slaframeworkscr.psc" Line 304
    [sla_Framework (0804290F)].slaUtilScr.GetActorArousal() - "slaframeworkscr.psc" Line 1019
    <unknown self>._fwb_sla.GetArousal() - "_fwb_sla.psc" Line 17
    [_fwb_modifiers (0000502D)]._fwb_modifiers.UpdateSlaValues() - "_fwb_modifiers.psc" Line 3173
    [_fwb_modifiers (0000502D)]._fwb_modifiers.ReadPlayerState() - "_fwb_modifiers.psc" Line 1142
    [_fwb_modifiers (0000502D)]._fwb_modifiers.OnUpdate() - "_fwb_modifiers.psc" Line ?
[03/10/2025 - 07:54:18PM] SLAX ASA - Data for Actor:[Actor < (00000014)>] called:Sarana GetActorDaysSinceLastOrgasm:0.129383 from StorageUtil
[03/10/2025 - 07:54:24PM] SLAX - GetActorExposure BEGIN Sarana is 0.000000
[03/10/2025 - 07:54:24PM] SLAX - GetActorExposure END   Sarana returns 0.000000
[03/10/2025 - 07:54:24PM] SLAX ASA - Data for Actor:[Actor < (00000014)>] called:Sarana GetActorDaysSinceLastOrgasm:0.130737 from StorageUtil
[03/10/2025 - 07:54:24PM] SLAX ASA - Data for Actor:[Actor < (00000014)>] called:Sarana GetActorDaysSinceLastOrgasm:0.130764 from StorageUtil
[03/10/2025 - 07:54:24PM] SLAX ASA - Data for Actor:[Actor < (00000014)>] called:Sarana GetActorDaysSinceLastOrgasm:0.130779 from StorageUtil
[03/10/2025 - 07:54:24PM] Error: Cannot set the faction rank with a None faction
stack:
    [ (00000014)].Actor.SetFactionRank() - "<native>" Line ?
    [sla_Framework (0804290F)].slaUtilScr.GetActorFrustration() - "slaframeworkscr.psc" Line 342
    [sla_Framework (0804290F)].slaUtilScr.GetActorArousal() - "slaframeworkscr.psc" Line 1019
    <unknown self>._fwb_sla.GetArousal() - "_fwb_sla.psc" Line 17
    [_fwb_modifiers (0000502D)]._fwb_modifiers.UpdateSlaValues() - "_fwb_modifiers.psc" Line 3173
    [_fwb_modifiers (0000502D)]._fwb_modifiers.ReadPlayerState() - "_fwb_modifiers.psc" Line 1142
    [_fwb_modifiers (0000502D)]._fwb_modifiers.OnUpdate() - "_fwb_modifiers.psc" Line ?
[03/10/2025 - 07:54:24PM] SLAX ASA - Data for Actor:[Actor < (00000014)>] called:Sarana GetActorDaysSinceLastOrgasm:0.130795 from StorageUtil
[03/10/2025 - 07:54:24PM] Error: Cannot set the faction rank with a None faction
stack:
    [ (00000014)].Actor.SetFactionRank() - "<native>" Line ?
    [sla_Framework (0804290F)].slaUtilScr.GetActorFatigue() - "slaframeworkscr.psc" Line 304
    [sla_Framework (0804290F)].slaUtilScr.GetActorArousal() - "slaframeworkscr.psc" Line 1019
    <unknown self>._fwb_sla.GetArousal() - "_fwb_sla.psc" Line 17
    [_fwb_modifiers (0000502D)]._fwb_modifiers.UpdateSlaValues() - "_fwb_modifiers.psc" Line 3173
    [_fwb_modifiers (0000502D)]._fwb_modifiers.ReadPlayerState() - "_fwb_modifiers.psc" Line 1142
    [_fwb_modifiers (0000502D)]._fwb_modifiers.OnUpdate() - "_fwb_modifiers.psc" Line ?
[03/10/2025 - 07:54:24PM] SLAX ASA - Data for Actor:[Actor < (00000014)>] called:Sarana GetActorDaysSinceLastOrgasm:0.130817 from StorageUtil
 

 

Edited March 10, 2025 by Nymra

[alex77r4]

2 hours ago, Nymra said:

After installing your SAR 3 I experienced heavy lag spikes every 3 seconds or so ( I am on LE)

Disabling Arousal calculation in the MCM did not change this. 

 

I had Sexlab Aroused Modular installed previously and suspected it to missbehave, so I thought I try your mod.

I m in a cell with only 3 NPC (2 are my followers) and my FPS drop constantly by 50-60, coinciding with this log entry:

 

That errors come from _fwb_ scripts and correspond to SexLab Disparity, a mod abandoned from 2020. Have nothing to do with SLAX.

 

Additionally, the Stacks Dumps only can be generated every 60 seconds. Then, you only can have Frame Drops caused by Stack Dump one time per minute.

But you never can have Frame Drops caused by millons and millons of scripts errors.

 

If you are having "lag spikes every 3 seconds" can be caused by the Morph feature of Disparity. Try disabling Disparity.

If the problem persist must be other mod that is making incorrect things. Disable mods until you find it.

[Nymra]

20 hours ago, alex77r4 said:

 

That errors come from _fwb_ scripts and correspond to SexLab Disparity, a mod abandoned from 2020. Have nothing to do with SLAX.

 

Additionally, the Stacks Dumps only can be generated every 60 seconds. Then, you only can have Frame Drops caused by Stack Dump one time per minute.

But you never can have Frame Drops caused by millons and millons of scripts errors.

 

If you are having "lag spikes every 3 seconds" can be caused by the Morph feature of Disparity. Try disabling Disparity.

If the problem persist must be other mod that is making incorrect things. Disable mods until you find it.

 

I used Sexlab Disparity since it came out together with SLAX base version and the Modular edition and it never gave me trouble. The only thing that change before the lag spikes started is the change to the SAR3 version. All body morph features in Disparity are disabled. I ll investigate further. Thank you. 

[Fraying9981]

Hi,

 

Can this be considered the latest, most stable SLA framework, compatible with most recent mods as of 2025?
Is it compatible and/or more advanced than SexLabAroused Redux V28b SSE Modified by BakaFactory(2020 11 17)) ?

Edited March 28, 2025 by Fraying9981

[someperson1423]

I'm also interested in Fraying's question, there are tons of arousal framework variants out there and I'm having trouble deciphering which one to use. They all claim to be backwards compatible with everything and should be no-issue drop-ins but in my experience I've run into more that don't work than do.

 

To add a bit more to the question that, what version of this should I be using for SE? Is it only the A3A update that is compatible? I'm running it now but is there a reason that the exposure rate is not changeable? I understand that it is linked to the polling rate so it changes proportionally but I want to be able to change it myself. I don't really care that changing the polling rate doesn't automatically update the exposure rate, I'd much rather have to change it manually if I ever do change polling if it means I will still have the option to change what I feel is a very basic setting to customize how quickly exposure builds.

 

Also, is there any documentation anywhere to all the MCM settings? It looks like they weren't put in, most just say like $SLA_InfoFrustrationGrowth instead of actually having any info. It is pretty easy to guess at what they do based on the names but it would be nice to know specifics.

[Omnishade]

I'm playing a female character and I'm using SLSO and SLAX-ASA3, configured so I can't orgasm from oral sex. If I gain a lot of exposure from a bj, or any other encounter where my character doesn't orgam, is it supposed to quickly fall to 0 over a short time? Exposure decay rate is 2.0.

I don't remember it working like this in previous games. Seems bugged. You should be able to keep a high arousal for quite some time, and even then it might not drop due to frustration and other factors.

Edited September 13, 2025 by Omnishade

[alex77r4]

7 hours ago, Omnishade said:

I'm playing a female character and I'm using SLSO and SLAX-ASA3, configured so I can't orgasm from oral sex.

 

That have nothing to do with SLAX... That was the Female Orgasm Conditions on SLSO:

Spoiler

 

If you look the conditions in the lower side of the screen you can see that the woman can't get the orgasm on Blowjob animations.

The woman enjoyment can up to max but SLSO prohibit the orgasm. Also, the woman enjoyment can go down while playing the animation depending on others conditions.

 

Another thing is the woman arousal after the animation and no, must not lower to 0 (cero) when the animation end until you have a very new game, player level very low, or another mod  making incorrect operations over the arousal.

[Omnishade]

2 hours ago, alex77r4 said:

 

That have nothing to do with SLAX... That was the Female Orgasm Conditions on SLSO:

  Reveal hidden contents

 

If you look the conditions in the lower side of the screen you can see that the woman can't get the orgasm on Blowjob animations.

The woman enjoyment can up to max but SLSO prohibit the orgasm. Also, the woman enjoyment can go down while playing the animation depending on others conditions.

 

Another thing is the woman arousal after the animation and no, must not lower to 0 (cero) when the animation end until you have a very new game, player level very low, or another mod  making incorrect operations over the arousal.

 

I can see english isn't your strong side. I am fully aware of this and it's not what I'm asking about.

[justbob2]

I'm getting an error in Vortex when I tried to sort after installing SLAX-ASA3. It tells me there is a cyclic rule issue between 'SexLabAroused.esm'  and 'SexLabAroused.esm'??  I uninstalled every version  of Aroused, including SLAX-ASA3, then manually made sure the 'SexLabAroused.esm file was gone. The cyclic error went away. I reloaded SLAX-ASA3 and the error came back. Is this a problem with this mod, or Vortex?

[alex77r4]

1 hour ago, justbob2 said:

Is this a problem with this mod, or Vortex?

 

Is a user error... You must have some strange rule in Mods or in Plugings:

Spoiler

 

 

 

 

 

 

I not have any rule related to aroused with more than 500 mods in this installation...

Edited September 19, 2025 by alex77r4

[justbob2]

15 hours ago, alex77r4 said:

 

Is a user error... You must have some strange rule in Mods or in Plugings:

  Reveal hidden contents

 

 

 

 

 

 

I not have any rule related to aroused with more than 500 mods in this installation...

Thank you for your response. If the problem is in my set up, I don't know how to fix it.  So I'll just move on.

[safado]

21 hours ago, justbob2 said:

I'm getting an error in Vortex when I tried to sort after installing SLAX-ASA3. It tells me there is a cyclic rule issue between 'SexLabAroused.esm'  and 'SexLabAroused.esm'??  I uninstalled every version  of Aroused, including SLAX-ASA3, then manually made sure the 'SexLabAroused.esm file was gone. The cyclic error went away. I reloaded SLAX-ASA3 and the error came back. Is this a problem with this mod, or Vortex?

 

  Likely can be fixed if you make SLAX-ASA3 win all conflicts. You are not supposed to overwrite SLAX-ASA3 with anything anyway, that will break SLAX-ASA3. Do not load combine different SLAR-variants in the same deployment, all SLAR-variants are incompatible with each other.

There is currently not patch compatible with SLAX-ASA3, some mods hack SLAR with "patches" but those are not compatible with SLAX-ASA3.  

 

Make the "dependencies" column visible in Vortex, and Check if SLAX-ASA3 has a little thunder icon in that column. The icon is a button, click it and make sure everything listed is like;  SLAX-ASA3 - "AFTER" -  some-mod - any version.

There is also a shortcut button "After All" that will make it so. 

 

You should look for Vortex's mods conflict resolution tutorials, If you do not understand. 

 

Edited September 20, 2025 by safado

[justbob2]

On 9/20/2025 at 11:59 AM, safado said:

 

  Likely can be fixed if you make SLAX-ASA3 win all conflicts. You are not supposed to overwrite SLAX-ASA3 with anything anyway, that will break SLAX-ASA3. Do not load combine different SLAR-variants in the same deployment, all SLAR-variants are incompatible with each other.

There is currently not patch compatible with SLAX-ASA3, some mods hack SLAR with "patches" but those are not compatible with SLAX-ASA3.  

 

Make the "dependencies" column visible in Vortex, and Check if SLAX-ASA3 has a little thunder icon in that column. The icon is a button, click it and make sure everything listed is like;  SLAX-ASA3 - "AFTER" -  some-mod - any version.

There is also a shortcut button "After All" that will make it so. 

 

You should look for Vortex's mods conflict resolution tutorials, If you do not understand. 

 

Thank you for the advice. I've gone back to using SLAX-29 for now.  If I decide to pick up the 'Aroused' fight again, I'll give this a try.

[safado]

15 hours ago, justbob2 said:

Thank you for the advice. I've gone back to using SLAX-29 for now.  If I decide to pick up the 'Aroused' fight again, I'll give this a try.

 

SLAX-29? That is Skyrim-LE only.

There are bugs fixed by tenri and others, do not know where that version is in the forum.

 

Edited September 21, 2025 by safado

[justbob2]

2 hours ago, safado said:

 

SLAX-29? That is Skyrim-LE only.

There are bugs fixed by tenri and others, do not know where that version is in the forum.

 

It's the version by Lupine00 "SLAX-29-2019-10-21-0 (WIP).7z", and I am currently playing Skyrim-LE.

[safado]

5 hours ago, justbob2 said:

It's the version by Lupine00 "SLAX-29-2019-10-21-0 (WIP).7z", and I am currently playing Skyrim-LE.

 

I'm referring to the patch for SLAX-29, is in the forum somewhere and is for original SLAX19LE.  (not ASA)

I think is this one.  Fixed some original SLAX29 issues with arousal calculations and other stuff.