More Nasty Critters Special/Anniversary Edition

[N.Gamma]

Hello, with the new version 12.5 the update of Creature Framework, which was still integrated in 12.3, is now missing!

I do not want to install the old version. Can you please also upload a separate version of Creature Framework 2, which can also be found on the original More Nasty Critters page?

[Tlam99]

1 hour ago, fiinhvip said:

I used the one comes with MNC probably 12_3

Then 12_5 with 201A should work without cleaning.

I had 12.3 with 201 installed and faced the same problem as you when cleaning.

So I upgraded directly and checked with resaver afterwards, no problems in save and it works.

 

[Cmonkeez]

Everything updated to current MNC 12.5 now, but I always have the same issue since v.12.0. Any version of CF newer than 1.1.0-pre2A will not always have erection functions. Lewd acts will give me animal peens 30% of the time. So CF 2.x.x is no use so far for me in SSE but 1.1.0 still works 100%. So... I don't know how everyone else does with newer CF but 1.1.0 works perfectly for me with MNC12.5 HC12.4.

[Mernonkaira]

So I just want my animals to have genitalia for realism reasons. I don't particularly want to have them raping any of my characters. Does anyone know of a mod that does that without the animations? 

[MadMansGun]

8 minutes ago, Mernonkaira said:

So I just want my animals to have genitalia for realism reasons. I don't particularly want to have them raping any of my characters. Does anyone know of a mod that does that without the animations? 

https://www.loverslab.com/files/file/15040-less-nasty-critters/

note: if your using SSE you will need to convert the meshes first.

[Mernonkaira]

15 minutes ago, MadMansGun said:

https://www.loverslab.com/files/file/15040-less-nasty-critters/

note: if your using SSE you will need to convert the meshes first.

Thanks. I could probably figure out eventually how to edit MNC, but I'm lazy enough to ask if someone has already done it.

[Claudiaalv]

Creature Framework has been downgraded to 1.1.0-pre2. Things will be broken!

 

This message comes to me when I start the game after updating MNC and I have read the comments here and it tells me that I have to clean the save so that it works with the old CF I have the CF 1.1.0-pre2A-SE installed
Please can someone tell me how to clean the save exactly so that I can solve the problem or something else is needed to do I would not like to delete the mods I like them very much.
Beforehand thank you very much.

ahh and when entering the mod configuration it tells me to exit and wait for CF to start, I have waited 2 hours and it tells me the same

[Tlam99]

Spoiler

Spoiler

you need fallrim resaver

see pictures, remove script instances, but not plugins.

[Claudiaalv]

1 hour ago, T-lam said:

  Revelar contenidos ocultos

  Revelar contenidos ocultos

necesitas resaver fallrim

ver imágenes, eliminar instancias de secuencias de comandos, pero no complementos.

 

Hello, thank you very much for your answer. I will apply this and I hope the problem is fixed and I can have CF and MNC as I had.
thanks

     

[fluffyavenger]

"For all version: If I forget to remove the setvehicle.dll, simply remove it. It is not needed."

Am I the only person who doesn't know how to do this?

Because it is stopping my game from launching. 

 

*edit* it's in here: Skyrim Special Edition\Data\SKSE\Plugins

 

*double edit just in case it helps anyone out at some point* somehow i had uninstalled devious devices and vortex was absolutely fine with that lol, even though it had a ton of dependencies. Maybe vortex and/or DD dont see eye to eye? Either way reinstalling DD allowed me to launch game.

 

but now i've broken everything because game still wont launch...ugh i suck at this lol

[zarantha]

1 hour ago, fluffyavenger said:

"For all version: If I forget to remove the setvehicle.dll, simply remove it. It is not needed."

Am I the only person who doesn't know how to do this?

Because it is stopping my game from launching. 

 

*edit* it's in here: Skyrim Special Edition\Data\SKSE\Plugins

 

but now i've broken everything because game still wont launch...ugh i suck at this lol

The whether or not the dll is there does not prevent your game from launching. If you delete it, it simply removes a cosmetic error where your mod manager says it's not compatible.

You've got some other issue preventing your game from launching.

[fluffyavenger]

yeah i absolutely binned it somewhere along the line. was not being careful enough with upgrading mods.

[TheBatDad1989]

Anyone managed to get this working with Skyrim VR? Says no animals detected in the creature framework. 

[Astarte29]

13 hours ago, fluffyavenger said:

yeah i absolutely binned it somewhere along the line. was not being careful enough with upgrading mods.

I've borked my game through mod greed-look, shiny!!! so many times.

 

This time, i'm rebuilding step by step, running through LOOT, and cleaning whatever it tells me to clean in SSEdit.  Wish me luck!

 

[Husky1o1]

Good luck ?

[LaceyFun]

I'm trying to mod Skyrim VR as well and been having the same no erection problem as many people have before. Including the no creature issue. I'm very new at this so is there anything I can provide to help fix this issue? Any information?

[TheBatDad1989]

On 10/17/2020 at 7:23 AM, 1xyzzyx1 said:

Strange, I'm using this for SkyrimVR, everything works except the JSON files in "Data/creatures.d" do not parse. This leads to them having the sheathes but no erections.

 

- I get the error message "CF JSON File MNC.json creature X is missing its race or race name" (where X is a number from 0 to 163), which means that either raceForm = none or raceName = "". However, looking at the array (below), they are present.

 

- I get this message for all the other .json files in creatures.d.

 

- I have tried editing the case of RaceName to raceName but neither seem to "work".

 

- I am letting the MNC skeletons override the XPMSE skeletons.

 

- Yes, I have JContainers installed and never had any issues with other mods requiring it.

 

Anyone have any ideas?

 

The array looks like this:

{

    "modID": "MNC",

    "ModName": "More Nasty Critters",

    "creatures": [{

            "skinName": "Draugr 0",

            "normalArmor": null,

            "arousedArmor": "__formData|MoreNastyCritters.esp|0x12cd",

            "raceForm": "__formData|Skyrim.esm|0xd53",

            "RaceName": "Draugr",

            "skinForm": "__formData|Skyrim.esm|0x16ee3"

        },

        //etc

}

I'm having this exact same issue!!!

[TheBatDad1989]

1 hour ago, LaceyFun said:

I'm trying to mod Skyrim VR as well and been having the same no erection problem as many people have before. Including the no creature issue. I'm very new at this so is there anything I can provide to help fix this issue? Any information?

Yeah I checked the logs through the console and I was getting the following message: "File MNC json creature is missing its race or race name"

I'm going to assume you're getting the same message when you enable logging to console. In the CF menu enable logging to console, press re-register mods, close the menu then press the tilde button on your keyboard and see if you're getting the same errors. I am starting to think its JContainersVR being unable to read the json files in the creatures.d folder.

[TheBatDad1989]

FIXED IT! It was 100% a problem with the current latest available version of JContainersVR (v4.1.13) - rolling back to v4.1.2 from the JContainers Github fixed everything! So if you're using VR, don't use the latest JContainersVR atm.

[Dreamer1986]

"removed the integrated CreatureFramework again, too many people bitching about it." Well, now in the Special Edition we have no up to date CreatureFramework anymore, so people will have problems with that. 

[MadMansGun]

28 minutes ago, Dreamer1986 said:

"removed the integrated CreatureFramework again, too many people bitching about it." Well, now in the Special Edition we have no up to date CreatureFramework anymore, so people will have problems with that. 

the one on the MNCSLAL page should work in SSE.

[Dreamer1986]

7 hours ago, MadMansGun said:

the one on the MNCSLAL page should work in SSE.

Okay, thank you. 

[LaceyFun]

Wait so @The BatDad1989 you're saying use JContainers SE v4.1.2 and that fixed your issue? Is it possible If I can get a link and a look at your load order?

[Wicken]

Can someone tell me where I'm screwing up, please. Initially installed Wilding as a stand alone (it may still be). Creatures didn't attack and occasionally got the mating prompt with no animation. Installed Creature Framework V1.1.0 pre-2A/JContainer and MNC (More Nasty Critters V12.5 SE) figuring I needed framework and animation pack. Now I get animation for PC only. The creature just stands there. They're not frozen or T-pose, they just stand there. 

   I DO NOT HAVE FNIS for Creatures (FNIS zoo) installed because Fores keeps saying there isn't one for SE yet. I'm thinking that might be my problem but I'm not sure. I have read other posts that say it works just fine with their set up. So, what else do I need to do?

[zarantha]

38 minutes ago, Wicken said:

Can someone tell me where I'm screwing up, please. Initially installed Wilding as a stand alone (it may still be). Creatures didn't attack and occasionally got the mating prompt with no animation. Installed Creature Framework V1.1.0 pre-2A/JContainer and MNC (More Nasty Critters V12.5 SE) figuring I needed framework and animation pack. Now I get animation for PC only. The creature just stands there. They're not frozen or T-pose, they just stand there. 

   I DO NOT HAVE FNIS for Creatures (FNIS zoo) installed because Fores keeps saying there isn't one for SE yet. I'm thinking that might be my problem but I'm not sure. I have read other posts that say it works just fine with their set up. So, what else do I need to do?

you need to install fnis creature pack. it's in the fnis optional files.