BeeingFemale

[SiuJerkJai]

 

 

yes you have some suggestions in the tread how you can try to do.

My self actually posted the same suggestion here and on Nexus.

 

Have you checked your load order. So you actually have the masters at the correct place?

I use LOOT to check load orders. 

 

Which masters would have to be loaded before BF then?

 

 

You have not run LOOT on that load order.

Run it again, from inside MO. Dont forget to click apply on the tree small dots up in the left corner.

 

Read this tread.

http://www.loverslab.com/topic/43043-skyrim-modding-guide/

 

 

Actually. I have run LOOT? And this is the preferred order LOOT wants. INSIDE ModOrganizer. It has always done this. A year ago and now. 

I will gladly do it again. I doubt that's the reason. But maybe that link you shared will enlighten me.

 

Or are you referring to TES5Edit. That has the tree and the conflict detection....?

 

As for the Papyrus bug, I tried going without SexLab coz I found that post too. I made a clean save. Reinstalled everything. And it still wouldnt work. 

 

 

EDIT: That thread offers yt tuts I have been following to the tiniest detail. I wasn't joking when I said that I have been trying for 2 entire days to find the culprit. No, I ain't a modder. But I know about conflicts and I have scoured the internet before I came here to pester the creator with my issue. Esp since I thought I was the only one this was happening to. :/

 

[doisitrey]

 

As for the Papyrus bug, I tried going without SexLab coz I found that post too. I made a clean save. Reinstalled everything. And it still wouldnt work. 

 

 

 

 

 

You need to install BF with old StorageUtil.dll 3.1  or will never work, and after start game still with the old .dll, only after BF is running fine you can replace back the old .dll with new one. Remember that many mods include StorageUtil.dll, so you have to replace the one that's the lowest in order since will replace all of them.

 

Edit: and are you using newest version of loot? I have up to date versions, 1 it look different then yours, and 2, mine always put/show  BF.esm under sexlab.esm

Edited March 26, 2016 by doisitrey

[SiuJerkJai]

I'll try again on my next days off. Thanks for all the effort.

[SiuJerkJai]

 

 

 

1: do you have PapyrusUtil installed? if you do, its above or under SexLab Framework 1.61b?

note: PapyrusUtil dont have an .esm, so it wont shot in LOOT, its above or under in MO (Mod organizer)

 

2: download THIS, get main file, and most important look at old files and get version 3.1 (so get 3.1 and new 3.2)

Link is from Nexusmods.

 

3a: uninstall Being Female 2.7.2, load your latest save game, and save game again.

3b: SKIP if you start new game, you dont need to load/save.

 

4a: extract form the PapyrusUtil  3.1 (old version), StorageUtil.dll

4b: replace the StorageUtil.dll you just extracted with the one in lowest order

eg: if you use MO have PapyrusUtil and SexLab Framework, there will be 2 identical StorageUtil.dll (both are from version 3.2), you dont have to replace both, only the one in lowest order since it overwrite the other one.

• path Skyrim/Data/SKSE/Plugins => for nexus users/manual install

• for MO, just right click the one in lowest order, and Open in Explorer => navigate to SKSE/Plugins

 

5a: Install Being Female 2.7.2 and load the latest save game (the one saved after uninstalling BF, see above), or start new game.

 

6: change any settings you want in Being Female, save game and exit!

 

7: extract from PapyrusUtil 3.2 (new version) the StorageUtil.dll and replace the one we replaced earlier with the old version 3.1.

 

8: load your latest save and play.

 

 

EDIT: if you use MO read what Uncle64 said above, if you're new to MO, read/watch all videos!  if you know how to use MO, you can skip to 8th video Mod Organizer#7 - Third Party Programs &... and see how to add Loot to MO, but if you didnt know that already, then better read and watch all videos

 

I'll try this.

 

I dont really have PapyrusUtil. Only the pex files in SexLab but not the entire plugin. 

 

 

As for the Papyrus bug, I tried going without SexLab coz I found that post too. I made a clean save. Reinstalled everything. And it still wouldnt work. 

 

 

 

 

 

You need to install BF with old StorageUtil.dll 3.1  or will never work, and after start game still with the old .dll, only after BF is running fine you can replace back the old .dll with new one. Remember that many mods include StorageUtil.dll, so you have to replace the one that's the lowest in order since will replace all of them.

 

Edit: and are you using newest version of loot? I have up to date versions, 1 it look different then yours, and 2, mine always put/show  BF.esm under sexlab.esm

 

Oh boy. I may have the old version from last year... I'll rectify that if that is causing the issue I'mma effing bang my head to the wall.

 

 

 

EDIT Okay, the load-order was sorted. The new LOOT version changed that. But the blank screen remains an issue. I shall go ahead and try out the papyrusutil thing. When I got the time

 

 

[doisitrey]

 

 

 

 

A quick note, I just made a test to be sure, if you start new game, BF will NOT work regardless if you use 3.1. If you start a new game, start it with all mods installed except BF. once they all loaded, save game, exit, activate BF and load the save, this is the only way to get it to work.

[Uncle64]

@doisitrey

Perhaps you should check and compare your suggestions against my suggestions. Perhaps your eyes could find some middle part of handling this issue.

Have followed your suggestions and they seems good.

 

My self use 3.2 and it works for me when I use my way. Since there are other mods that rely on latest Papyrus. Frostfall and others.

 

It actually work if you start one new game.

Perhaps dear @Milz should comment this issue little

[saviliana]

I've found that it seems Natural Lighting and Atmospherics can cause BeeingFemale 2.6+'s MCM blacken compeletely and stop script working, rather then the way BFAP1.3 only stops BF detecting SL.

Don't know what is the cause tough, NLA doesn't even overwright anything at all.

[SiuJerkJai]

 

 

 

 

 

A quick note, I just made a test to be sure, if you start new game, BF will NOT work regardless if you use 3.1. If you start a new game, start it with all mods installed except BF. once they all loaded, save game, exit, activate BF and load the save, this is the only way to get it to work.

 

Alright, I'll try that then, load all mods before installing BF 2.7.2 on a clean save. Then add BF and run FNIS and see what happens. I'll check back here once I've got results. I hope to get that done tomorrow. Maybe. Hopefully. Let's keep our fingers crossed.

@doisitrey

Perhaps you should check and compare your suggestions against my suggestions. Perhaps your eyes could find some middle part of handling this issue.

Have followed your suggestions and they seems good.

 

My self use 3.2 and it works for me when I use my way. Since there are other mods that rely on latest Papyrus. Frostfall and others.

 

It actually work if you start one new game.

Perhaps dear @Milz should comment this issue little

I'll make sure to check this thread frequently. I suppose if we all work together and do a trial and error approach, we'll find out what's wrong. :3

 

 

Edit: I figured out which Mods exactly caused the CTD events. That's at least something. Some of the SexMods aren't compatible with the new SL framework AND BF. Stable ones re SL Framework seem to be SpouseEnhanced and SexLabRomance (oldish versions, both). Once  I add BF272 to the mix, the blank screen issue returns (in a new game). I haven't tried the PapyrusUtil stuff yet. Maybe that will do sth about it.

Did I get that right? I should still go through all those steps but need to have a new game only for it to actually work?

 

Also. HAPPY EASTER!

[anolbee]

I play BeeingFemale 2.6 now, but have one problem.

I enabled female sperm in MCM of Sexlab 1.61b, but it didn't support the sperm for BF. Only males' yet.

I cannot find any lesbian options in MCM of BF, any ideas? 

[doisitrey]

@doisitrey

Perhaps you should check and compare your suggestions against my suggestions. Perhaps your eyes could find some middle part of handling this issue.

Have followed your suggestions and they seems good.

 

My self use 3.2 and it works for me when I use my way. Since there are other mods that rely on latest Papyrus. Frostfall and others.

 

It actually work if you start one new game.

Perhaps dear @Milz should comment this issue little

 

Fallowed your advice and did some tests and the results are quite interesting.

• the  2.6 version at page 138 works fine without blank bug

• did a mix with the files in 2.6 and 2.7.2, and I found that if you replace FWSystemConfig.psc (BeingFemale\Scripts\source\BeingFemale) from the old version with the new one, blank bug its fixed, but BF in MCM menu will get stuck at "BF is loading...", but here you have 2 options, one press the "Force Start" which will fix the load bug, or save/reload and that will fix the bug.

• I replaced more files, and in one of the test, I had an "installing graphical bar" in game, I wonder if this was removed in 2.7+ or if this is bugged, since the change log on main page don't say it was removed.

 

 

but now here its an even stranger thing I discovered, I managed to make the mod to work without any kind of modifications to it or with old version of dll.

on a new game, if you open the BF menu you will get blank bug, but if you fallow this steps you wont get the blank bug

1 -  don't press OK on the box that open in center of screen (see photo), wait till all mods in top left corner of screen finish installing

2 - once no more mods on top left of screen, press ok, (while the box is in center of screen, game is paused) now very fast press ESC and go to Mod Configuration (this will pause the game) and open any mod (DONT open BF!!, I open Campfire) and wait 10 seconds, after close the Mod Configuration and very fast again open the console (this will pause the game), in my case, I get 5 info boxes on my screen that require to press OK, after each box, I do the steps above (Mod Config+console). You will notice, that every time you do this, some mods will install in top left corner of the screen. Now if you start BF, you will see that it works, but instead of blank box, you will see "BF is loading" and this will never end, either press force start(I dont recommend this), or save and reload, and it will get fixed.

 

Here is what I think it what happens, basically at first there are only a small group of mods that are in process of being installed and many other mods and other mods components are still in queue, in that small moment where you pause/unpause the game, other remaining groups of mods/components exit infinite queue and enter in installing process. My guess is that the blank box appear because not all components of BF are installed, and when we try to open BF, we get the blank box and the remaining components that ware in infinite queue, get canceled permanently.

[Uncle64]

I think the loading bar is removed.

My self always waits until all are loaded and no more system messages is coming up. It can take up to 10 minutes.

[Loller99]

So, if i am correct, CBBE is compatible, providing that i get the right preset, right?

And if so (i am using CBBE HDT - SLIM body from bodyslide) should i add the pregnancy belly from bodyslide, or will the mod automatically do it?

Thanks for the answer!

[Uncle64]

So, if i am correct, CBBE is compatible, providing that i get the right preset, right?

 

And if so (i am using CBBE HDT - SLIM body from bodyslide) should i add the pregnancy belly from bodyslide, or will the mod automatically do it?

 

Thanks for the answer!

 

Yes it should work fine.

 

[SiuJerkJai]

Quick response to using 2.6 instead of 2.7.2. 

It actually works fine! Without changing anything! Sure there is the odd instability but that's easily explained with other mods I installed.

Thanks for that suggestion! :3

[Loller99]

 

So, if i am correct, CBBE is compatible, providing that i get the right preset, right?

 

And if so (i am using CBBE HDT - SLIM body from bodyslide) should i add the pregnancy belly from bodyslide, or will the mod automatically do it?

 

Thanks for the answer!

 

Yes it should work fine.

 

 

 

Ah, perfect, thank you for the answer!

And what about the pregnancy belly? Should i make it in bodyslide, or the mod will make it on its own?

[Uncle64]

 

 

So, if i am correct, CBBE is compatible, providing that i get the right preset, right?

 

And if so (i am using CBBE HDT - SLIM body from bodyslide) should i add the pregnancy belly from bodyslide, or will the mod automatically do it?

 

Thanks for the answer!

 

Yes it should work fine.

 

 

 

Ah, perfect, thank you for the answer!

And what about the pregnancy belly? Should i make it in bodyslide, or the mod will make it on its own?

 

No you dont need to create one, the mod makes it for you and your npc. If you have installed all other supporting mods correct.

[EvilReFlex]

Found a small bug!

 

"NordRace" is deactivated for the napkin panties and will not show up ingame if the player is playing a female nord. 

A other problem is the armor slot of the panty, maybe change it to slot 60. 

 

I changed the bone-weighting and the shape to HDT CBBE and added BodySlide support: (already changed to slot 60)

BeeingFemalePanty.7z

 

 

[WindWaker4D]

Can't seem to get the MCM to work? I've tried deactivating the addon plugin and reinstalling the mod, I'm unsure as to if I've missed installing some part? Any help is appreciated <3

[ejswanny]

Can't seem to get the MCM to work? I've tried deactivating the addon plugin and reinstalling the mod, I'm unsure as to if I've missed installing some part? Any help is appreciated <3

 

Most people having the same problem.  Till it's fixed, try downloading the 2.6 version from nexus.

[WindWaker4D]

 

Can't seem to get the MCM to work? I've tried deactivating the addon plugin and reinstalling the mod, I'm unsure as to if I've missed installing some part? Any help is appreciated <3

 

Most people having the same problem.  Till it's fixed, try downloading the 2.6 version from nexus.

 

Oh yeah thnx I realized that, but now that I'm using 2.6 I just found that sexlab romance is causing ctd I need my romance yo~ Any solutions? Can I use beeing female 2.6 with sexlab romance?

 

[ejswanny]

Sure, I have used it many times.  I don't currently, so don't know of any issues with it these days.  It's probably just a matter of your load order.  Play around with your load order, i.e. plugins and then mod priority on the left.  Sometimes you just get lucky until you get more familiar with the mods and their priorities, etc...  

[Uncle64]

Use this instead of Romance.

Updated and works better.

http://www.loverslab.com/topic/50483-sexlab-eager-npcs/

[WindWaker4D]

Use this instead of Romance.

Updated and works better.

http://www.loverslab.com/topic/50483-sexlab-eager-npcs/

 

Thnx I didn't realize that sexlab eager npcs was so detailed, it's a good replacement ty ^-^

[EvilReFlex]

Can't seem to get the MCM to work? I've tried deactivating the addon plugin and reinstalling the mod, I'm unsure as to if I've missed installing some part? Any help is appreciated <3

 

1. start a new game

2. wait until all mods are activated,

3. open mcm menu and load beeingfemale

4. load your other save and beeingfemale should work now.

[jardek12]

Hey  milzschnittte are aware of the extraction issue for Being Female 2.7.2?