Trails in the Sky 2nd Chapter

[DimaKoyt]

1 hour ago, IBfree said:

First，choose your language.

Then open the game, click on [connect], search for [spring] in [costumes], and change it to 1.

 

2nd Trainer.zip 12.38 MB · 1 download

Thank You

[Cloudcuculander]

Hello, could someone show me what the modded root folder is suppose to look like?

Having a bit of trouble setting this all up.

p.s for each individual mod, do I need to make a new table etc?

Thank you.

[amorrow28]

1 hour ago, Cloudcuculander said:

Hello, could someone show me what the modded root folder is suppose to look like?

Having a bit of trouble setting this all up.

p.s for each individual mod, do I need to make a new table etc?

Thank you.

 

Sure.  What you have will depend on which mods you are installing, but this is what my folder looks like:

 

Spoiler

 

Inside my table_en folder, all the tables are there.  Notice that this is sorted by date modified, so you can see the four modified tables at the top.

 

Spoiler

 

You do not make a table for each mod - in fact if that were possible then I would have done it for you...  You have to combine all the mods into one set of tables.

[amorrow28]

Here is a cheat engine table to allow changing around your party members:

 

Upload replaced on 10/5/26 for v1.04.

 

Sky 2nd Party for v1.04.CT.zip

 

(I am not the original author of the party member script, it is from reddit.  I just updated the one for Kuro 2 so that it works for Sky 2nd.  Also, the original author reached out to me and helped me fix a few errors in the script, so party selection should be a bit better!)

 

Note: This table is for developing and testing mods.  Theoretically you could try to use it to force different party members into your game, but at least in the prologue sometimes it leads to crashes for me.  I haven't gotten to the first battle yet though, so YMMV.  If it doesn't work for you, it's not fixable, don't bother asking.

Edited Tuesday at 04:46 AM by amorrow28

[untestedpower]

4 hours ago, amorrow28 said:

 

No idea... it doesn't do that for me...  Actually, my bet is that whatever that bath towel mod is, it's using my innocence files to generate nude mods.  (without credit to me or to @lakovic too)  I posted a postulation in the Sky 1st thread that deleting innocence_n.dds would turn my innocence costumes into nudes...  you've basically confirmed that that mod is probably my mod sans innocence_n.dds.

 

While I still think credit should be given where credit is due, I don't claim ownership over my mods so everyone has my permission to share and modify my mods as they see fit.  Still, I think this method is crude.  It makes much more sense to actually delete the underwear, which would be almost just as easy and would then allow you to use innocence as well.  You could take my innocence mods of Anelace, Josette and Julia (included in DOA pack 2) and do that too, I suppose.

I'm running into this problem too. Took a bath and all the girls were in Innocence. I tried installing an old towel mod from 1st just to see what would happen and everyone turned invisible as expected. Reinstalled the 2nd towel mod and now everyone's naked but innocence costume just makes them naked now. So yeah, someone definitely used it as a base.

[nmfl]

5 hours ago, planetkeeper said:

2nd正式版无法使用mod，至少要魔改成18系统才能用mod

请问是主机系统还是游戏版本？

[Mayor2210]

On 8/21/2026 at 4:30 PM, _QED said:

Chira-rism MOD [Lore-Friendly] [Soft-NSFW]

 

Top Row (L to R): Classic Style / 1st-Style (Intro Scene Exclusive) / Neo Bracer Model (1st-Style)

Bottom: Knight of Ruby

 

  Classic Style / 1st Style (Intro Scene Exclusive) -[Replace Data Transfer Model] : estell_dtb_v100.7z

  Neo Bracer Style (FC-Style) -[Replace Data Transfer Model] : estell_neobracer_v090.7z 

      Latest versionhttps://ayakamods.com/mods/estelle-chira-rism-refined-neo-bracer-outfit-custom-colors.3889/

  Knight of Ruby -[Replace Default Model] : estell_knightofruby_v090.7z

  Fav Fit Style  -[Replace Data Transfer Model] : estell_fav_fit_v090.7z 

 

 

From left to right: Anelace(8Leaves 1Blade school Early-Style model) / Scherazard(Default Outfit Chira-rism model) 

Bottom: Kloe(Jenis Uniform Chira-rism) / Kloe(iKnight of Sapphier) 

 

  Anelace 8leaves 1Blade school Early Style-[Replace Default Model] :　anelace_8l1bs_v0991.7z

  Scherazard Chirarism -[Replace Default Model] : schera_def_chirarism_v090.7z

  Kloe(Jenis Uniform Chira-rism) -[Replace Default Model] : jenis_uiform_chirarism_v091.7z

  Kloe(iKnight of Sapphier)  -[Replace Default Model] :Klose_SapphieriKnight_v090.7z

 

 

DL File sexy_apron_girls.7z

 

(Note: This mod was created and tested for the Demo version. An updated version may be released once the full game is out.)

 

 

 ✨Special Thanks:

@amorrow28-san - For the invaluable tutorials

  https://github.com/eArmada8/kuro_mdl_tool/wiki/Transferring-a-costume-with-new-physics-bones-and-adapted-animations

First off, you're my hero!! Thank you so much for sharing this!! I was just wondering—and please don't feel any pressure at all—if you might ever consider making a set of mods that does this for female characters: just remove the panties, expose the hairless lower half, and shorten the skirt, while leaving the upper half unchanged. I think that kind of contrast would be really sexy. But it's totally just a thought, and I completely understand if it's not something you'd be interested in doing. If you or any other talented modders out there ever decide to make something like this, I'd be really, really grateful. Either way, thanks again for your work!!

[Your Cinderella]

11 hours ago, amorrow28 said:

 

BathTowelShop.kurodlc.json.zip 481 B · 2 downloads

 

Here's a bath towel shop!  With the above .kurodlc.json file, I've added the hot springs outfits to the following shops:

• Le Loche: Phillys' Kitchen
• Rolent: Rinon's General Goods
• Bose: Paul Elk
• Ruan: O'Neil Duty-Free Shop
• Zeiss: Bell Station
• Grancel: Dept. Store - Accessory Shop

Please see here how to insert the .kurodlc.json file into your tables.  It is an intimidating process at first, but will become very easy once you do it once or twice.

 

Also, if you have the item already and you get an achievement that gifts you the item, the achievement will be locked.  To unlock the achievement, first equip the item, then claim the achievement.  Finally, I didn't set those exorbitant prices, Falcom did...  (seriously, they're just towels, wtf)

 

Enjoy!

@amorrow28i already put the kurodlc.json file correctly in the table and im in ruan. when i check oneil shop, why the hotspring costume not appearing ? its not there at all. 

Edited September 18 by Your Cinderella

[Mayor2210]

16 hours ago, alday69 said:

几个小时后，我终于成功地把第一章的所有mod都转移到了第二章，只需要一个正确的xinput文件。之前没有这个文件，游戏会出现角色隐形和崩溃的情况。现在连我的自定义菜单头像都能显示了。我直接把第一章的资源文件夹复制到第二章，然后使用了 https://www.nexusmods.com/trailsintheskysecondchapter/mods/5?tab=files上的xinput文件  ，mod就自动加载了，无需其他操作。就我的情况而言，我用的是SteamGG版本，目前为止这里上传的所有xinput文件都无法使用，甚至包括几个小时前发布的最新公开版1.0也不行。

xinput1_4.zip 18.17 kB · 2 次下载

Amazing!! It really works!! Thank you very much!! There are so many mods from the 1st Chapter that I want to bring over to the 2nd. You're a lifesaver!!

[Your Cinderella]

36 minutes ago, Your Cinderella said:

@amorrow28i already put the kurodlc.json file correctly in the table and im in ruan. when i check oneil shop, why the hotspring costume not appearing ? its not there at all. 

@amorrow28why is the bath towel not appearing for me. im in ruan. its not there in oneil shop. can you help? i did all the step correctly. 

[Mayor2210]

On 2026/8/20 at PM1点31分, amorrow28 said:

 

这是一个小小的MOD，把Estelle的短裤换成了内裤。

 

Sky_2nd_Estelle_No_Shorts.7z 479.72 kB · 30次下载

 

指示：

• 请按照本教程解压 asset_common_model.pac 文件 -请确保在进行下一步之前游戏仍然可以正常加载！
• 将此模组中的 asset 文件夹复制到你的基础天空文件夹中。它应该会替换一个文件。

享受！

I unpacked the asset folder according to the tutorial and replaced the original chr5000_c10.mdl with the modded one. However, after I entered the game, there was no change—the shorts did not disappear. Could you please help me fix this issue? Thank you very much!!

[Your Cinderella]

10 minutes ago, Mayor2210 said:

I unpacked the asset folder according to the tutorial and replaced the original chr5000_c10.mdl with the modded one. However, after I entered the game, there was no change—the shorts did not disappear. Could you please help me fix this issue? Thank you very much!!

same with me i try several mod share here, not even 1 work for me. idk why. i try all the DOAcosplay by @amorrow28not even a single of them work. i cannot buy it in the shop. its not there. 

Edited September 18 by Your Cinderella

[Your Cinderella]

i think there is a new way for using mod for 2nd chapter but nobody knows how yet. all the mod of DOAcosplay by @amorrow28port from 1st chapter, not a single one of them work at all for me. even the bath towel shop. nothing work. @Mayor2210

i know the way of using the mod, because everything work for me perfectly in 1st chapter, but in this 2nd chapter, not a single one of them work for me at all. 

Edited September 18 by Your Cinderella

[Your Cinderella]

@amorrow28did you tested it yourself all the DOAcosplay that you port from 1st chapter? because its really not even a single one of them is working. i cannot buy it in the shop. even the bath towel kurodlc not working. everything was working perfectly in trails 1st chapter. but in this 2nd chapter nothing work. i think there is really a new way to use mod. but nobody knows how yet.

[_dandyharry]

33 minutes ago, Your Cinderella said:

@amorrow28did you tested it yourself all the DOAcosplay that you port from 1st chapter? because its really not even a single one of them is working. i cannot buy it in the shop. even the bath towel kurodlc not working. everything was working perfectly in trails 1st chapter. but in this 2nd chapter nothing work. i think there is really a new way to use mod. but nobody knows how yet.

What are you talking about? This thread has had plenty of visitors, so don’t tell me that “nobody knows” how to use the mod.

I’ve confirmed that the mod works perfectly fine on my end, and I’ll post screenshots from my setup to show you.

Take another look at your own setup and check everything carefully. And please stop making multiple consecutive posts and cluttering up the thread.

[Your Cinderella]

35 minutes ago, _dandyharry said:

What are you talking about? This thread has had plenty of visitors, so don’t tell me that “nobody knows” how to use the mod.

I’ve confirmed that the mod works perfectly fine on my end, and I’ll post screenshots from my setup to show you.

Take another look at your own setup and check everything carefully. And please stop making multiple consecutive posts and cluttering up the thread.

i did. and i did nothing wrong. as i say it works perfectly in trails 1st chapter. but in this 2nd chapter nothing work. i did the same as how i did in trails 1st chapter. if you dont believe me, i can do a recording of it and show it of how i use the mod. @_dandyharry

 

[Your Cinderella]

1. extract asset common model 
2.extract asset common model info
3.extract table_en
4.extract image_en
then from table en take out costume tbl, item tbl, shop tbl, name tbl, dlc tbl

put it in a new folder first. then example use DOAcosplay.json. put it in the new folder together with all the tbl. then use kurodlc make tables to generate a new tbl with the doacosplay costume. after that put all the tbl back into table en and press replace when ask. 

@_dandyharrysee like that right? 

as i say it work perfectly in 1st chapter, but 2nd chapter nothing work for me.

i can show you a screen recording of me doing the step as proof if you dont believe. because nothing work. i did all the step correctly

 

Edited September 18 by Your Cinderella

[Your Cinderella]

so tell me how come it doesnt work for me. i did all the step correctly right? i check shop and its not appearing. i cannot buy it. @_dandyharry

[Burnginblade04]

i know shes still just an npc at this point but is anyone going to bother making a mod for renne?

[Crazy Landlord]

On 8/22/2026 at 2:11 AM, lmaple said:

compile a loose file loader for Sky/Sora 2nd demo.
Update v1.01 for Steam release

https://github.com/lmaple0/sora2looseload

put xinput1_4.dll into the root directory.

For Linux/Steam Deck players, please add launch option 

"WINEDLLOVERRIDES="xinput1_4=n,b" %command%" 

no quotation remark required.

sora2looseload-v1.0.1-win64.zip 23.06 kB · 1 download

 

 

blank screen when launch the game. WHILE works properly you last uploaded xinput1_4.dll size 50KB

[meu1133]

48 minutes ago, Your Cinderella said:

so tell me how come it doesnt work for me. i did all the step correctly right? i check shop and its not appearing. i cannot buy it. @_dandyharry

 

I hate to simply repeat what is already in the guide, but after extracting the files using `extract.py`, you need to rename the original `.pac` file by adding `.bak` to the extension so that the game doesn't load it. Even with the first game, failing to do this meant the original `.pac` file was loaded instead, preventing the mod from working.

[ShortstackLover]

Hoping for some thicc mods this time around since the game is peak

 

 

[lmaple]

34 minutes ago, xie0077 said:

blank screen when launch the game. WHILE works properly you last uploaded xinput1_4.dll size 50KB

 

From my side, it works properly. Add back a 7z file with old dll.

 

Note that if you are using Evolution voice mod from BiliBili Up 杏雨浩（Yuhao）

https://www.bilibili.com/video/BV1wAeg6DEEJ/

Only put voice, language-corresponding table and script folder in the folder where sora_2nd.exe exits.

 

 

Do not replace sora_2nd.exe as he modified exe that embeds another loose file loader, which may conflicts if you use xinput1_4.dll as well.

 

 

 

中文：

 

如果你用了B站UP主杏雨浩的EVO语音MOD，且语音包voice文件已经在游戏目录了，对于他提供的三选一mod只解压其中的table_sc，script_sc文件夹（如果你用简中玩空轨2nd），用繁中则是table_tc，script_tc，对应语言即可）。不需要替换exe，因为他修改了exe使其能够读取这些松散文件，同时用的话可能会冲突，且考虑到游戏刚发售未来可能还会更新（比如今天下午刚更新了），建议还是只用xinput1_4.dll来加载这些松散文件。

 

 

Edited September 18 by lmaple

[Your Cinderella]

15 minutes ago, meu1133 said:

 

I hate to simply repeat what is already in the guide, but after extracting the files using `extract.py`, you need to rename the original `.pac` file by adding `.bak` to the extension so that the game doesn't load it. Even with the first game, failing to do this meant the original `.pac` file was loaded instead, preventing the mod from working.

i did. i add .bak to aset common model, asset common model info, image_en, table_en. i put.bak to all the original file. but then the weird thing is that, after that the game could not start at all, but after i remove every .bak the game then can start. but in trails 1st chapter. i put .bak to all original file and the game can still start and the mod all work. i can provide you a screen recording for proof if you dont believe. @meu1133

Edited September 18 by Your Cinderella

[Your Cinderella]

i got so angry that i uninstall the game. and now im installing it back and will provide screen recording from the very 1st step to the last step. you will see that i did all the step correctly and yet the mod can't work at all. @_dandyharry @meu1133