RadiantProstitution Tweaked

[germanicus]

Well, that console command is for the single quest/task. It doesn't fix a problem on long run. Once, you do the stable quest, or any other console command single quest, you have to write it again. It doesn't shows up permanently.

 

Did you try "Run quest"  or something like that in RP MCM menu? There should be 8 quests greyed line above that line.

[ImmortalOne]

Well, that console command is for the single quest/task. It doesn't fix a problem on long run. Once, you do the stable quest, or any other console command single quest, you have to write it again. It doesn't shows up permanently.

 

Did you try "Run quest"  or something like that in RP MCM menu? There should be 8 quests greyed line above that line.

 

You mean "setstage (questname) 0" ?

 

[ImmortalOne]

I think I had a "glitch" with the Farmhand/Giant quest last night
There where 12 Giants at the camp, but with 3 of them the dialogue option didn't work (could press the action button all I wanted but nothing happend)
But still she worked through 9 of them of gotten "only" 7000G for it

[mpackman]

Thanks a lot for this very great mod!

 

After using it for quite a long time, I can only see 3 'strange letter' quests:

- The giants

- The comparions

- The ambush (fan letter)

MCM says there are 8. How to get the other ones?

[ImmortalOne]

Thanks a lot for this very great mod!

 

After using it for quite a long time, I can only see 3 'strange letter' quests:

- The giants

- The comparions

- The ambush (fan letter)

MCM says there are 8. How to get the other ones?

To get the Orc Stronghold Quest, do the mission in a hold that has an Orc Stronghold (Windhelm, Markarth)

The Stable/horsefuck fuck Quest seems to be given totally random, but my toon never gotten it on a normal way (i did test it with the setstage (questname) 0 command)

The others I have no clue about what they are or how to start them

 

[masterhunter247]

Well, that console command is for the single quest/task. It doesn't fix a problem on long run. Once, you do the stable quest, or any other console command single quest, you have to write it again. It doesn't shows up permanently.

 

Did you try "Run quest" or something like that in RP MCM menu? There should be 8 quests greyed line above that line.

MCM shows there are 8 quests in total. I ran rescan quest and it always shows on the upper left corner that found 8 quests. But stable quest is the only one that I couldn't get.

[germanicus]

thanks for the answer kbsj. It looks like that mod is installed right, but something is preventing this quest. One more thing to aks: have you tried to reinstall the mod?

[masterhunter247]

thanks for the answer kbsj. It looks like that mod is installed right, but something is preventing this quest. One more thing to aks: have you tried to reinstall the mod?

By reinstall you mean do a clean save? I really do not know how to "properly" reinstall a script-intensive mod like RPT in a "safe" manner.

[mpackman]

 

Thanks a lot for this very great mod!

 

After using it for quite a long time, I can only see 3 'strange letter' quests:

- The giants

- The comparions

- The ambush (fan letter)

MCM says there are 8. How to get the other ones?

To get the Orc Stronghold Quest, do the mission in a hold that has an Orc Stronghold (Windhelm, Markarth)

The Stable/horsefuck fuck Quest seems to be given totally random, but my toon never gotten it on a normal way (i did test it with the setstage (questname) 0 command)

The others I have no clue about what they are or how to start them

 

 

 

Thanks a lot, what is the quest name for the stable one? Would be nice if there was a way to figure out the names of the others...

[masterhunter247]

 

 

Thanks a lot for this very great mod!

 

After using it for quite a long time, I can only see 3 'strange letter' quests:

- The giants

- The comparions

- The ambush (fan letter)

MCM says there are 8. How to get the other ones?

To get the Orc Stronghold Quest, do the mission in a hold that has an Orc Stronghold (Windhelm, Markarth)

The Stable/horsefuck fuck Quest seems to be given totally random, but my toon never gotten it on a normal way (i did test it with the setstage (questname) 0 command)

The others I have no clue about what they are or how to start them

 

 

 

Thanks a lot, what is the quest name for the stable one? Would be nice if there was a way to figure out the names of the others...

 

Stable quest name is "mf_prostitute_stablebang." I couldn't get this very quest working, so it bothers me a lot. That's why I remember the name of this quest.

[germanicus]

 

thanks for the answer kbsj. It looks like that mod is installed right, but something is preventing this quest. One more thing to aks: have you tried to reinstall the mod?

By reinstall you mean do a clean save? I really do not know how to "properly" reinstall a script-intensive mod like RPT in a "safe" manner.

 

 

No, I didn't mean clean save. I was thinking on plain unnistall/install mod, that includes some easer steps to do then clean save. If you want, I can PM to you.

[masterhunter247]

thanks for the answer kbsj. It looks like that mod is installed right, but something is preventing this quest. One more thing to aks: have you tried to reinstall the mod?

 

I have savetool, a game script cleaner from http://www.nexusmods.com/skyrim/mods/52363. I can do a reinstallation. On the other hand, I tried to load a previous game save with no RPT installed on it, and the stable quest still does not work. If necessary I may reinstall entire Skyrim game, even the OS, or just wait for a fix.

[germanicus]

I'm sorry. Misunderstanding. I didn't refer to save clean tool, I was thinking something like this:

 

1. Uninstall mod

2. Run BOSS and run FNIS

3. Load the latest save

4. wait couple of seconds and then Save in the new slot & exit.

5. Run save tool cleaner and clean all 3 options

6, Save and overwrite

7. Load the latest save

8. Wait a couple of seconds and save it again in a new slot

9. Install the RP

10. Run BOSS & FNIS

11. Load the latest save

12. Wait until RP initialized itself and when done, save in the new slot and exit

13. Load the latest save and this should resolve the problem (at least it did to me in this and few other mods)

 

[masterhunter247]

I'm sorry. Misunderstanding. I didn't refer to save clean tool, I was thinking something like this:

 

1. Uninstall mod

2. Run BOSS and run FNIS

3. Load the latest save

4. wait couple of seconds and then Save in the new slot & exit.

5. Run save tool cleaner and clean all 3 options

6, Save and overwrite

7. Load the latest save

8. Wait a couple of seconds and save it again in a new slot

9. Install the RP

10. Run BOSS & FNIS

11. Load the latest save

12. Wait until RP initialized itself and when done, save in the new slot and exit

13. Load the latest save and this should resolve the problem (at least it did to me in this and few other mods)

This is exactly the same procedure of making a clean save.

[germanicus]

Oh, no, it isn't. Clean save requires to uncheck SL and all SL's mods. This version doesn't' require do that, only uninstallation of RP:

[masterhunter247]

Oh, no, it isn't. Clean save requires to uncheck SL and all SL's mods. This version doesn't' require do that, only uninstallation of RP:

Okay, I think you meant this tool: http://www.nexusmods.com/skyrim/mods/31724

 

I followed all the procedures you listed, but I'm not sure how to test the stable quest, just "startquest?"

[ImmortalOne]

 

Oh, no, it isn't. Clean save requires to uncheck SL and all SL's mods. This version doesn't' require do that, only uninstallation of RP:

Okay, I think you meant this tool: http://www.nexusmods.com/skyrim/mods/31724

 

I followed all the procedures you listed, but I'm not sure how to test the stable quest, just "startquest?"

 

 

No, type -> setstage MF_Prostitute_StableBang 0

That should get it started, if I mis spelled it then you can check it with -> help MF_Prost , that should list all the quests of this mod

[masterhunter247]

 

 

Oh, no, it isn't. Clean save requires to uncheck SL and all SL's mods. This version doesn't' require do that, only uninstallation of RP:

Okay, I think you meant this tool: http://www.nexusmods.com/skyrim/mods/31724

 

I followed all the procedures you listed, but I'm not sure how to test the stable quest, just "startquest?"

 

 

No, type -> setstage MF_Prostitute_StableBang 0

That should get it started, if I mis spelled it then you can check it with -> help MF_Prost , that should list all the quests of this mod

 

Nothing is happening after I typed the correct quest ID of stableBang. And a new weird problem appears, since RPT reset itself after those procedures, now just normal prostitution job in a random inn does not trigger sexlab animations - nothing is happening after my character and client arrive a spot and my character tells the client to "be gentle" or anything else, no animation at all, and because of that, I couldn't finish the job, the client just kept following my character, no way to stop it.

[germanicus]

OK, it is "normal" symptom. RP reset to its default state. Now type in console "stopquest mf_prostitute_handler" and then, reset all guests. After you do that, go to SL and reset animations. That will (should) fix animation triggering.

[ImmortalOne]

 

 

 

Oh, no, it isn't. Clean save requires to uncheck SL and all SL's mods. This version doesn't' require do that, only uninstallation of RP:

Okay, I think you meant this tool: http://www.nexusmods.com/skyrim/mods/31724

 

I followed all the procedures you listed, but I'm not sure how to test the stable quest, just "startquest?"

 

 

No, type -> setstage MF_Prostitute_StableBang 0

That should get it started, if I mis spelled it then you can check it with -> help MF_Prost , that should list all the quests of this mod

 

Nothing is happening after I typed the correct quest ID of stableBang. And a new weird problem appears, since RPT reset itself after those procedures, now just normal prostitution job in a random inn does not trigger sexlab animations - nothing is happening after my character and client arrive a spot and my character tells the client to "be gentle" or anything else, no animation at all, and because of that, I couldn't finish the job, the client just kept following my character, no way to stop it.

 

 

Not even if you use the "reset all quests" option from the MCM menu?

 

[masterhunter247]

OK, it is "normal" symptom. RP reset to its default state. Now type in console "stopquest mf_prostitute_handler" and then, reset all guests. After you do that, go to SL and reset animations. That will (should) fix animation triggering.

Okay. I reset all RP quests in MCM, re-registered sexlab animation in MCM, and I finished typing "stopquest/startquest mf_prostitute_handler" in console. Animations are still not triggered, the "be gentle"ish conversation changed over and over again, for instance, the client wants my character to do anal, after he follows the character to a spot, the conversation option is "be gentle," then nothing happens, client is still there, talk to him again, the conversation changes to "I'll suck you dry." No animation at all.

About stable quest, still no progress after "startquest" or "setstage" commands. "Sqv" shows the quest is still stopped, with current stage at 0, and priority at 0.

[ImmortalOne]

 

OK, it is "normal" symptom. RP reset to its default state. Now type in console "stopquest mf_prostitute_handler" and then, reset all guests. After you do that, go to SL and reset animations. That will (should) fix animation triggering.

Okay. I reset all RP quests in MCM, re-registered sexlab animation in MCM, and I finished typing "stopquest/startquest mf_prostitute_handler" in console. Animations are still not triggered, the "be gentle"ish conversation changed over and over again, for instance, the client wants my character to do anal, after he follows the character to a spot, the conversation option is "be gentle," then nothing happens, client is still there, talk to him again, the conversation changes to "I'll suck you dry." No animation at all.

About stable quest, still no progress after "startquest" or "setstage" commands. "Sqv" shows the quest is still stopped, with current stage at 0, and priority at 0.

 

 

Yeah, that's not suposed to happen

Are all the animations turned on in the SexLabFramework Menu, and did you test the animations with another mod? (MatchMaker for instance)

If all else fails, try it on a new game

[masterhunter247]

 

 

OK, it is "normal" symptom. RP reset to its default state. Now type in console "stopquest mf_prostitute_handler" and then, reset all guests. After you do that, go to SL and reset animations. That will (should) fix animation triggering.

Okay. I reset all RP quests in MCM, re-registered sexlab animation in MCM, and I finished typing "stopquest/startquest mf_prostitute_handler" in console. Animations are still not triggered, the "be gentle"ish conversation changed over and over again, for instance, the client wants my character to do anal, after he follows the character to a spot, the conversation option is "be gentle," then nothing happens, client is still there, talk to him again, the conversation changes to "I'll suck you dry." No animation at all.

About stable quest, still no progress after "startquest" or "setstage" commands. "Sqv" shows the quest is still stopped, with current stage at 0, and priority at 0.

 

 

Yeah, that's not suposed to happen

Are all the animations turned on in the SexLabFramework Menu, and did you test the animations with another mod? (MatchMaker for instance)

If all else fails, try it on a new game

 

Other sexlab mods work properly, just RP does not function. Do you think a complete reinstall of the entire game would help?

[ImmortalOne]

 

 

 

OK, it is "normal" symptom. RP reset to its default state. Now type in console "stopquest mf_prostitute_handler" and then, reset all guests. After you do that, go to SL and reset animations. That will (should) fix animation triggering.

Okay. I reset all RP quests in MCM, re-registered sexlab animation in MCM, and I finished typing "stopquest/startquest mf_prostitute_handler" in console. Animations are still not triggered, the "be gentle"ish conversation changed over and over again, for instance, the client wants my character to do anal, after he follows the character to a spot, the conversation option is "be gentle," then nothing happens, client is still there, talk to him again, the conversation changes to "I'll suck you dry." No animation at all.

About stable quest, still no progress after "startquest" or "setstage" commands. "Sqv" shows the quest is still stopped, with current stage at 0, and priority at 0.

 

 

Yeah, that's not suposed to happen

Are all the animations turned on in the SexLabFramework Menu, and did you test the animations with another mod? (MatchMaker for instance)

If all else fails, try it on a new game

 

Other sexlab mods work properly, just RP does not function. Do you think a complete reinstall of the entire game would help?

 

That might solve a lot of issues and conflicts yeah, I do it quite often, also because it's a good chance to try out and install new mods

But I'm the type of guy that even formats his C drive when ever Windows is acting up, so...

[masterhunter247]

 

 

 

 

 

 

 

 

OK, it is "normal" symptom. RP reset to its default state. Now type in console "stopquest mf_prostitute_handler" and then, reset all guests. After you do that, go to SL and reset animations. That will (should) fix animation triggering.

Okay. I reset all RP quests in MCM, re-registered sexlab animation in MCM, and I finished typing "stopquest/startquest mf_prostitute_handler" in console. Animations are still not triggered, the "be gentle"ish conversation changed over and over again, for instance, the client wants my character to do anal, after he follows the character to a spot, the conversation option is "be gentle," then nothing happens, client is still there, talk to him again, the conversation changes to "I'll suck you dry." No animation at all.

About stable quest, still no progress after "startquest" or "setstage" commands. "Sqv" shows the quest is still stopped, with current stage at 0, and priority at 0.

Yeah, that's not suposed to happen

Are all the animations turned on in the SexLabFramework Menu, and did you test the animations with another mod? (MatchMaker for instance)

If all else fails, try it on a new game

Other sexlab mods work properly, just RP does not function. Do you think a complete reinstall of the entire game would help?

That might solve a lot of issues and conflicts yeah, I do it quite often, also because it's a good chance to try out and install new mods

But I'm the type of guy that even formats his C drive when ever Windows is acting up, so...

Maybe you could help me. I use both NMM and WB, and I have 240+ active esps. Do you know how to perform a complete clean uninstall of Skyrim without reinstall the entire OS? Thanks.