RadiantProstitution Tweaked

[nutluck]

Korial - thank you very much for your updates. I have one favour to ask. Since you frequently update your mod, can you add to you mod something like dialogue script save. You see, your dialogue is great and I love it lot. But I did some "adoptions" on some dialogue lines. So, whenever I update you mod, it change and overwrite existing one, and I have to go again in TES5edit to change it too. I have seen this possible in one mod on this forum. Would you be so kind to do that? I really wish to save my dialogue script. Thank you.

 

So is this the avatar you finally decided on? Lesbian elves?

[germanicus]

LOL nutluck - for the time being. I can't decide between several others I found yesterday and today. I think that I will make my decision by tomorrow.

 

BTW - I love lesbians. I adore them.

[Derk]

I have an issue, where I can only get anal animations in any kind of job, and the only jobs available to me are home deliviery, prostitution and serving food in the tavern. I reinstalled the mod, but nothing fixed. I had 25 clients with "rank per stride" of 3.

 

Did anybody had this problem and knows how to fix it?

[germanicus]

 

Korial - thank you very much for your updates. I have one favour to ask. Since you frequently update your mod, can you add to you mod something like dialogue script save. You see, your dialogue is great and I love it lot. But I did some "adoptions" on some dialogue lines. So, whenever I update you mod, it change and overwrite existing one, and I have to go again in TES5edit to change it too. I have seen this possible in one mod on this forum. Would you be so kind to do that? I really wish to save my dialogue script. Thank you.

 

if you could point to the mod maybe i can assimilate... i mean steal... adapt that function.

 

 

I found the mod - SexLab Romance by spaceman. Can you, please contact him about that. I would be truly grateful to you.

 

Quote:

26/12/2013:

Source Code made available for anyone to use/modify

[Z0mBieP00Nani]

 

 

 

 

@manta: maybe it's nothing, but I'll say it anyway. Check the sexlab menu on the MCM, if you go where the animations are listed you should see all of them checked.

And pls read the instructions of the mods you install, you should have known how FNIS worked.

 

@kori: maybe you missed my previous post : http://www.loverslab.com/topic/24450-radiantprostitution-tweaked/page-86?do=findComment&comment=782983

 yeah sry.

 

I often see some dialogue lines change, if I wait a few seconds..is it normal? It almost always happens when I tell them to "follow me" and then click again when I'm at the place I choose.

 

Normal Skyrim behavior if the response to the dialog option overrides the original text.

 

I lied on the number of clients and a bounty was put on me (400 gold)..strangely this didn't trigger the dialogue with the whiterun guards..I get the "I know you" comment once I click on them and nothing else. If I try to commit a normal crime, though, the prison dialogue triggers normally.

 

Odd i use the normal Bounty mechanics. did you run the run in the whiterun?

 

I'm having pretty frequent crash to desktop.

 

CTD it skyrims way of saying "something is wrong" and it does not create any hints of what is wrong. The only thing i can hit to is to use the Memory extender in skse 1.7 and the ENBoost.

 

Updated the CTD Fix Suggestion on the main page regarding that.

 

Does anybody know why, after the Installation of Radiant Prostitution actual Version f, on the upper left Corner a message appears aprox. every 10 minutes :

 

you didnt pay for your gear in time and a bounty has been put on your head.

 

of course nothing of this happens, but the meassage appears and i dont want to play a 200 hours + game with that message appearing . and yes there is no doubt that this is from Radiant Prostitution right after installing.

 

Is that a fresh install? if it is that should not happen as this message is from the "get your stuff back" quest after you been robbed.

Either way just open the console and type "stopquest  mf_GettingStuffBack"

 

 

 

I'm having an issue where sometimes I loose control over my character after rough sex animations have played. I can move the camera around with the joysticks, but none of the buttons work. Any idea what might be causing that?

mh can you tell me what you where doing? in some case i disable the player controls to avoid problems but seems i missed it somewhere. The other possibility is that you use the free float cam and it still some what bugged.

 

 

I was in Whterun again and it had just finished two rough missionary animations ("leg up" is the only part about the name I can remember) and then the buttons would not work anymore. I have Free Fly Camera turned on in SexLab.(which has never seemed to work right in the first place since installing the newest version or SL).

 

with the joysticks I can use the camera to look around, but only from one spot.

 

Is there a console command I can type in to allow control of my character again?

[nutluck]

player.tc should return player control if type into the console.

[shinji72]

 

Korial - thank you very much for your updates. I have one favour to ask. Since you frequently update your mod, can you add to you mod something like dialogue script save. Yo

 

So is this the avatar you finally decided on? Lesbian elves?

 

 

Germanicus! You will keep this avatar for a long time? Like, one week? 

[germanicus]

LOL Shinji - all depends about the votes. Whichever avatar gain highest number of votes, I will choose it. Did you vote?

[Higgen]

Hi i'm new to this mod.  I downloaded primarily so that npcs in the background "wenches and such" will have sex on their own without me triggering anything.  I have the latest sexlab framework and the latest 1.07g tweaked of this mod.  I do not use SOS

 

I get the message "wench is on the job" but they never actually have sex with any npc?  what could the problem be?

[Z0mBieP00Nani]

player.tc should return player control if type into the console.

 

Thank you, I KNEW there was a command, I just couldn't remember what it was.

 

[Z0mBieP00Nani]

Just accepted a home delivery quest, went to the NPC's house and everything went fine until the second part of the script was supposed to play (the first animation set played fine). Instead of the second half of the script playing my character just stands there naked and nothing happens, I can't use the joysticks to move, or the buttons to interact with the NPC I was sent to either, all I can do is look around. I can bring up the pause menu and reset the quest, but even then I still can't move my character.

 

(Free Fly Camera mode is not active)

[germanicus]

Just accepted a home delivery quest, went to the NPC's house and everything went fine until the second part of the script was supposed to play (the first animation set played fine). Instead of the second half of the script playing my character just stands there naked and nothing happens, I can't use the joysticks to move, or the buttons to interact with the NPC I was sent to either, all I can do is look around. I can bring up the pause menu and reset the quest, but even then I still can't move my character.

 

(Free Fly Camera mode is not active)

 

It is  common issue with SL 1.57. try to type in console "tfc" and type it again. If nothing happens, (99% will not happen), load the game before that task since there is no help. I wrote about that issue on SL's thread and here too.

[nutluck]

 

player.tc should return player control if type into the console.

 

Thank you, I KNEW there was a command, I just couldn't remember what it was.

 

You're welcome. I made a little index card of console commands I am likely to occasionally use. I keep it handy just incase for stuff like that.

[korialstraszbob]

Just accepted a home delivery quest, went to the NPC's house and everything went fine until the second part of the script was supposed to play (the first animation set played fine). Instead of the second half of the script playing my character just stands there naked and nothing happens, I can't use the joysticks to move, or the buttons to interact with the NPC I was sent to either, all I can do is look around. I can bring up the pause menu and reset the quest, but even then I still can't move my character.

 

(Free Fly Camera mode is not active)

 

mh. the player controls do get disable on the home delivery. Can you recreate that error and then upload your papyrus.0.log? Possible that the event handler waiting for the end of the animation is not trigger or crashing.

[Toddi]

I just accepted a home delivery quest but i didn´t get a note or Journal entry. I went to every house inside and around Whiterun including Dragonsreach but all NPCs just told me to go. I think the customer is Belethor because the next day at 2 pm he still didn´t have the Dialog line for selling/buying.

does anyone know about that problme or have a console command to start the quest?

 

The 3rd and 4th logfile were in "my games/skyrim/logs/script/user. I don´t know if they´re relevant.

 

And the quest Settings section in MCM isn´t available anymore.

[Dmouse52]

I had that problem in morthal but after loading an autosave that leaving the inn there makes resolved the problem for me

[Toddi]

I had that problem in morthal but after loading an autosave that leaving the inn there makes resolved the problem for me

 

I tried that, didn´t work.

[korialstraszbob]

I just accepted a home delivery quest but i didn´t get a note or Journal entry. I went to every house inside and around Whiterun including Dragonsreach but all NPCs just told me to go. I think the customer is Belethor because the next day at 2 pm he still didn´t have the Dialog line for selling/buying.

does anyone know about that problme or have a console command to start the quest?

 

The 3rd and 4th logfile were in "my games/skyrim/logs/script/user. I don´t know if they´re relevant.

 

And the quest Settings section in MCM isn´t available anymore.

 

mh. Something is terrible wrong with your save game. As all List containing the quests and even the WorkCloths list does not exist:

Quest list is none:
[05/16/2014 - 04:43:50PM] ERROR: Cannot call GetSize() on a None object, aborting function call
stack:
	[mf_Prostitute_Handler (12000D62)].mf_handler_config.buildQuestSettingsPage() - "mf_Handler_Config.psc" Line 815
	[mf_Prostitute_Handler (12000D62)].mf_handler_config.OnPageReset() - "mf_Handler_Config.psc" Line 211
	[mf_Prostitute_Handler (12000D62)].mf_handler_config.SetPage() - "SKI_ConfigBase.psc" Line 793
	[SKI_ConfigManagerInstance (17000802)].SKI_ConfigManager.OnPageSelect() - "SKI_ConfigManager.psc" Line 146

WorkClothes list is none:
[05/16/2014 - 04:44:06PM] ERROR: Cannot call HasForm() on a None object, aborting function call
stack:
	[mf_Prostitute_Handler (12000D62)].mf_handler_config.buildWorkingClothsPage() - "mf_Handler_Config.psc" Line 876
	[mf_Prostitute_Handler (12000D62)].mf_handler_config.OnPageReset() - "mf_Handler_Config.psc" Line 215
	[mf_Prostitute_Handler (12000D62)].mf_handler_config.SetPage() - "SKI_ConfigBase.psc" Line 793
	[SKI_ConfigManagerInstance (17000802)].SKI_ConfigManager.OnPageSelect() - "SKI_ConfigManager.psc" Line 146

Ok Please create a "clean" save. So deactivate the RP esp, load the game. wait 1-2min and then save again. Quit the game and activate RP again and load the latest save game again and check if the Quest Settings tab if there are quests registered.

[korialstraszbob]

Korial - thank you very much for your updates. I have one favour to ask. Since you frequently update your mod, can you add to you mod something like dialogue script save. You see, your dialogue is great and I love it lot. But I did some "adoptions" on some dialogue lines. So, whenever I update you mod, it change and overwrite existing one, and I have to go again in TES5edit to change it too. I have seen this possible in one mod on this forum. Would you be so kind to do that? I really wish to save my dialogue script. Thank you.

 

I check SexLab Romance but can find anything different in the Dialogue settings. But what you can do is this:

And then select new file and you should be golden.

[Piiska]

I like how you can change the starting clothes, but is there a way to add more clothing pieces than 2?

[korialstraszbob]

currently no. i could change it to accept a array of forms instead.

[germanicus]

 

Korial - thank you very much for your updates. I have one favour to ask. Since you frequently update your mod, can you add to you mod something like dialogue script save. You see, your dialogue is great and I love it lot. But I did some "adoptions" on some dialogue lines. So, whenever I update you mod, it change and overwrite existing one, and I have to go again in TES5edit to change it too. I have seen this possible in one mod on this forum. Would you be so kind to do that? I really wish to save my dialogue script. Thank you.

 

I check SexLab Romance but can find anything different in the Dialogue settings. But what you can do is this:

overwrite.png

And then select new file and you should be golden.

 

 

Thanks Korial. But how I can do that if, let's say, the current installed version of your mod is 1.7f and new one is zipped? If I unpack and install new version, it automatically overwrites present mod and dialogue settings. Also, if I manage to do that, do I have to go line by line or I can overwrite all dialogue at once?

[korialstraszbob]

That will create a new plugin that overwrites the dialogue lines.

So as long as it is loaded after RP all should be fine.

As for the replacements you have to do them line by line.

[Piiska]

currently no. i could change it to accept a array of forms instead.

That would be great if you could do that I was thinking about this armor mod in particular, which I would like to use as a set: http://www.loverslab.com/files/file/879-clps-bam-belt-armor-mashup-latex/ 

[Ambereros]

Just accepted a home delivery quest, went to the NPC's house and everything went fine until the second part of the script was supposed to play (the first animation set played fine). Instead of the second half of the script playing my character just stands there naked and nothing happens, I can't use the joysticks to move, or the buttons to interact with the NPC I was sent to either, all I can do is look around. I can bring up the pause menu and reset the quest, but even then I still can't move my character.

 

(Free Fly Camera mode is not active)

 

exacly the same happened to me ....

-> I can't do home delivery because of this ...

 

how can we help fix that ?