Outfit Studio/Bodyslide 2 CBBE Conversions

[shadow866]

1 hour ago, Violence6884 said:

The file I submitted was actually one off this thread, I believe converted by Sorceress99. So I got that one over the original. I don't know how Sorceress worked but I think that person never converted something that already had been.

 

Edit - Tried the original you provided that link for, no good(Still, thanks for that). I made sure there's nothing on any slot too. At least, nothing according to all my DD mods' MCMs as well as SexLab's MCM. I had the same issue with another person's clothes and the solution was for them to make alternate slot versions... Which was awfully kind of them if I'm honest, and the only thing that worked. Who knows.

 

In fact if someone would be kind enough to move the lower part to slot 44 or 45(The ones that other person used for their alt versions) and share that, it would be great :$

Dont think sorc converted it. He just linked it to an offsite that had the original. Just repost that is. So it should be the same.

Anyways i just tried the link i posted for you. And it works fine on my end. Everything equip without turning invisible.

So you problaby have an mod that blocks the slot when equipping something. Or some other conflict.

So it wont really solve your issue by changing the slots of the armor. Since anything else  that uses those slots will problaby have the same issue.

Check your mods again to make sure

Edit: Dont forget to rebuild those armors in bodyslide just incase.

 

[Violence6884]

2 minutes ago, shadow866 said:

Check your mods again to make sure

 

The package Fake linked me to, worked fine for which I'm grateful. Thank you both. As for a mod blocking a slot even though it might not necessarily occupy it, I suppose that would be possible; But I've no idea which one it could be and I have way too many mods to start flipping them off and on, one by one ;$ It will have to remain a mystery.

[shadow866]

8 hours ago, shadow866 said:

Spoiler

Alright so im kinda stuck on a conversion right now, been stuck on it for the last 2 days and made no progress.

So i figured that it doesnt hurt to ask here if anyone happen to know how to fix it.

 

So this outfit has massive clipping under the breast area when you run and i cant figure out how to fix it.

It has alot of extra vertices under the breast area so it would explain why it clips but i just cant get the weights right.

Anyone could give me a hand and tell me how you fixed it?

Or could give me a better idea how to fix it?

 

Here are 2 short videos that show the clipping

Running test clipping.rar

 

And here is the file. I also included the body i used for weights. (not reference, just weights). Its called weightpaintbody.

Dem Test clipping.rar

 

I can move the mesh extreme lenghts from body and it will still clip so no clue how to get it to work like its suppose to.

I rather not do manual weight painting since its super time consuming and more of a gamble.

If anyone manage to solve it. Give me a shout

 

[NoNickNeeded]

Maximum CBBE is gone from the Nexus... anyone got any info on what's going on there?

Nevermind, I just found out.

 

Looks like there is a permission issue between the Maximum and original CBBE mods, so it's been taken down (hopefully temporarily).

[Violence6884]

7 hours ago, zzlaq1 said:

 

That's very generous of you, thank you. I didn't even know about "Player.Inv" so I already learned something new ;3 Turns out I'm wearing an extra item of sorts which I have no idea what it is. The ID for it is (0E040F0C) and there's also something called a BAD EDITOR ID(Death Lady parts have that too by the way) for that item which is (0E040F0F). Not sure if that helps. MFG Console still only brings up just the Death Lady parts.
 

Here's what else I found so far; Devious Devices Integration will hide certain items, the MCM option related to that is under "DEVICES UNDERNEATH", called Item Hider Slot, which by default is set to "Device Hider + Long Hair(41)" where 41 I assume is a slot number? Disabling that against DDI's warnings, allows me to wear all pieces of Death Lady. Since as warned, that option should not be disabled and I'd like to keep DDI functional, this isn't an appropriate solution. Especially considering it doesn't hide any of my other gear.

 

Finally and probably a separate matter really, it seems Death Lady pieces don't play well with other armour- For instance equipping the lower Death Lady part with any chest piece that goes lower than the PC's upper torso produces clipping during movement, around the waist and butt(It looks like what happens when some clothes or armour are not built in BS). Most if not all other mod pieces I have installed can be mixed and matched with no clipping, so I assume that's not quite normal. I use the latest version of BS and I've properly built all my gear.

You know, I'm thinking at this point fiddling any further might actually destabilize my mod set up and I'd really prefer not to do that, having just cleaned up my game and started over(New Game, because most of the mods I use were updated) with all my mods in perfect order and working fine. Well, except for Death Lady now I guess. So if it's very easy for you to do, changing slots for the set's pieces might be more reasonable. If it won't take up much of your free time, that is. And I'll just have to deal with some clipping if I want to wear it with another set's chest piece, not a huge issue.

[Violence6884]

25 minutes ago, zzlaq1 said:

Having fun and good luck!

[NINI]Death Lady LOWERPART TO SLOT 44.7z

[NINI]Death Lady LOWERPART TO SLOT 45.7z

I have to assume the extra item I'm wearing is crucial to a mod I have, and that messing with basic DDI functions won't have good long term effects for my game... To say the least. Much harmless to change slots to a piece of equipment - And to that end, thanks again for the work you put into this!

[lab778178521]

On 2018/3/23 at 12:40 AM, NoNickNeeded said:

Of all of Lucy's outfits, this is my least favourite one... but I can't just let a fellow FT fan hang, especially not when it's such an easy "conversion" to make. Easy since it's not a conversion in the first place, but just adding the Sliders to an outfit (or two actually) that's already CBBE HTD (well... and fiddle around with some clipping bits).

 

DJQ Lucy Heartfilia Outfit_BS.7z

Thanks my friend ！Sorry for the late reply. Because I was busy with my exams for a while.

Thanks a lot again !

[Violence6884]

I hope you won't mind if I ask something irrelevant to conversions, it's been bugging me for too long though and I'm not sure where to post it; Where can I find a simple running animation replacement for female characters? I can't stand the vanilla one. I searched on Nexus but most of them seem to come packaged with other animations I don't want, or their own settings for breast bouncing ETC which I would like to avoid... Unless I read their descriptions wrong. I'm using CBBE HDT so I'd prefer to let that handle any bouncing involved.

 

By the way if it's completely inappropriate to ask here I'll delete this post, just please do share any suggestions. I am tired of running like an ape.

[kbshowtyme]

9 hours ago, Violence6884 said:

I hope you won't mind if I ask something irrelevant to conversions, it's been bugging me for too long though and I'm not sure where to post it; Where can I find a simple running animation replacement for female characters? I can't stand the vanilla one. I searched on Nexus but most of them seem to come packaged with other animations I don't want, or their own settings for breast bouncing ETC which I would like to avoid... Unless I read their descriptions wrong. I'm using CBBE HDT so I'd prefer to let that handle any bouncing involved.

 

By the way if it's completely inappropriate to ask here I'll delete this post, just please do share any suggestions. I am tired of running like an ape.

Go here https://www.nexusmods.com/skyrim/mods/50078/?tab=files  There are some running animations that are not packed with walking.  I downloaded separate walking and running animations and they work well together.  

[Violence6884]

1 hour ago, kbshowtyme said:

There are some running animations that are not packed with walking.  I downloaded separate walking and running animations and they work well together.  

 

Thank you.

[Riderofanarchy]

On 10/31/2017 at 7:28 PM, P@p@dr1n0 said:

Lustmord Vampire Armor  AmethystDeceiver

 

Original mod needed:

https://www.nexusmods.com/skyrim/mods/25852/?

 

Lustmord Vampire Armor-CBBE-Bodyslide.rar

 

 

  Reveal hidden contents

 

 

GOD BLESS YOU SIR. This armor always Looked Fantastic but that thing that always Killed the mood for me was the lack of Bodyslide. Now I can finally use it with matching body

[johntrine]

5 hours ago, Riderofanarchy said:

GOD BLESS YOU SIR. This armor always Looked Fantastic but that thing that always Killed the mood for me was the lack of Bodyslide. Now I can finally use it with matching body

does this work for you? it's not working for me...

[lafourminoir]

any CBBE bodyslide already for tis mod ? 

Hot Uniforms Maid_7BC

 

https://tre-maga.com/3272

 

 

[kbshowtyme]

On 3/27/2018 at 3:16 PM, johntrine said:

does this work for you? it's not working for me...

I could never get it to work for me either.

[shadow866]

11 hours ago, lafourminoir said:

any CBBE bodyslide already for tis mod ? 

Hot Uniforms Maid_7BC

 

https://tre-maga.com/3272

 

 

Il take a look at it when i got the time. Hopefully its not a wierd custom body.

[NoNickNeeded]

A bit off topic, but maybe someone still wants (and can) help me. I'm trying to get DEM Ritual converted to Cosio (from CLAMS 4.0) and it's frustrating me.

At first I just loaded the reference, fit the shape and conformed the sliders and everything looked perfect in outfit studio. Saved, booted it up in Bodyslide and none of the sliders did anything. Reloaded it in OS same bullshit, no working sliders.

Next I tried importing the Cosio body-mesh and then the Reference and in OS and BS everything looks perfect, but ingame the bits that are supposed to stick on the tips of the breasts float a hand's width in front of the breasts. When the breasts bounce the outfit moves the same way, but with an offset or something always the same distance and direction in front of the breasts.

I tried copying the breast related bone-weights into the part of the outfit that gives me the troubles, but no change.

 

When I put the outfit on and off I can see that the outfit itself is at the correct spot (compared to the naked breasts) but the breasts underneath the outfit are smaller than those of the naked body and thus don't touch the outfit.

Does anyone have an idea what is going on and how I can fix it?

[brewmasterhal]

11 hours ago, NoNickNeeded said:

A bit off topic, but maybe someone still wants (and can) help me. I'm trying to get DEM Ritual converted to Cosio (from CLAMS 4.0) and it's frustrating me.

At first I just loaded the reference, fit the shape and conformed the sliders and everything looked perfect in outfit studio. Saved, booted it up in Bodyslide and none of the sliders did anything. Reloaded it in OS same bullshit, no working sliders.

Next I tried importing the Cosio body-mesh and then the Reference and in OS and BS everything looks perfect, but ingame the bits that are supposed to stick on the tips of the breasts float a hand's width in front of the breasts. When the breasts bounce the outfit moves the same way, but with an offset or something always the same distance and direction in front of the breasts.

I tried copying the breast related bone-weights into the part of the outfit that gives me the troubles, but no change.

 

When I put the outfit on and off I can see that the outfit itself is at the correct spot (compared to the naked breasts) but the breasts underneath the outfit are smaller than those of the naked body and thus don't touch the outfit.

Does anyone have an idea what is going on and how I can fix it?

 

If you're trying to rig a model to work with the COSIO body, the procedure is:

1. Open Outfit Studio
2. Load the COSIO sliderset (not any other reference, not a new project) - the COSIO body is now your reference
3. Import the .nif of the model you want, and delete whatever body mesh is imported with it
4. Copy your bone weights (you may want to select individual meshes and individual bones to do selective copying, since full copy tends to cock up skirts and such)
5. Conform all
6. Save project as

[NoNickNeeded]

2 hours ago, brewmasterhal said:

 

If you're trying to rig a model to work with the COSIO body, the procedure is:

1. Open Outfit Studio
2. Load the COSIO sliderset (not any other reference, not a new project) - the COSIO body is now your reference
3. Import the .nif of the model you want, and delete whatever body mesh is imported with it
4. Copy your bone weights (you may want to select individual meshes and individual bones to do selective copying, since full copy tends to cock up skirts and such)
5. Conform all
6. Save project as

Here's what I just did:

1. Start OS
2. Load Reference -> From File: "...\mods\CLAMS of Skyrim 4.0\CalienteTools\Bodyslide\SliderSets\CosioHD.osp"
3. Import -> From nif: "...\mods\DEM Ritual by Krista with CBBE Curvy HDT Bodyslide by Avalon24\CalienteTools\BodySlide\ShapeData\DEM Ritual\DEM Ritual Gown without skirt\DEMRitualGownWithoutSkirt.nif" (there was no such file in the meshes folder).
   I did all the slider fiddling to make the shapes fit -> SetBase. A tiny touch-up with the reduce Mesh tool.
   Then I deleted BaseShape, the original CBBE body of the outfit.
4. The outfit comes seperated into three parts, so I copied each bone that touched a part onto that part via "Copy Selected Bone Weights".
5. Conform all
6. Save Project as

That's what I did and as long as I stay in OS it looks perfect. But once I exit OS and reload it or load it up in BodySlide no slider is working...

 

I'm using BodySlide 4.5.2 and I tried both the 32bit BS/OS started from MO1 and the 64bit started from MO2, both times with the same result. If anyone wants to take a crack at it, here's a zip with the files I got out of the attempt, including two screenshots that show which sliders-settings I used prior to "SetBase" to make the Reference body fit as closely as I could to the original body shape.

DEMRit_CosioConversionAttempt.7z

 

Guess I should also add a link to the original conversion I used as a base (though I'm not 100% sure this is the right post... I lost the link I used and had to re-search for it): https://www.loverslab.com/topic/24385-outfit-studiobodyslide-2-cbbe-conversions/?page=78&tab=comments#comment-1173331

[johntrine]

2 hours ago, zzlaq1 said:

Fitness outfit，bratop and mid length pant recolor and CBBE-HDT

fitness_recolor.7z

does this need the original? 

[tuxagent7]

@zzlaq1

 

firstly i want to thank you for posting your conversions

 

but when i try to use them in bodyslide, it seems that i cant change the weight sliders, and when i try to change the body type in outfit studio then i get stuck because i dont know how to fix the clipping even when reading the tutorial here in ll

[brewmasterhal]

3 hours ago, NoNickNeeded said:

Here's what I just did:

1. Start OS
2. Load Reference -> From File: "...\mods\CLAMS of Skyrim 4.0\CalienteTools\Bodyslide\SliderSets\CosioHD.osp"
3. Import -> From nif: "...\mods\DEM Ritual by Krista with CBBE Curvy HDT Bodyslide by Avalon24\CalienteTools\BodySlide\ShapeData\DEM Ritual\DEM Ritual Gown without skirt\DEMRitualGownWithoutSkirt.nif" (there was no such file in the meshes folder).
   I did all the slider fiddling to make the shapes fit -> SetBase. A tiny touch-up with the reduce Mesh tool.
   Then I deleted BaseShape, the original CBBE body of the outfit.
4. The outfit comes seperated into three parts, so I copied each bone that touched a part onto that part via "Copy Selected Bone Weights".
5. Conform all
6. Save Project as

That's what I did and as long as I stay in OS it looks perfect. But once I exit OS and reload it or load it up in BodySlide no slider is working...

 

I'm using BodySlide 4.5.2 and I tried both the 32bit BS/OS started from MO1 and the 64bit started from MO2, both times with the same result. If anyone wants to take a crack at it, here's a zip with the files I got out of the attempt, including two screenshots that show which sliders-settings I used prior to "SetBase" to make the Reference body fit as closely as I could to the original body shape.

DEMRit_CosioConversionAttempt.7z

 

Guess I should also add a link to the original conversion I used as a base (though I'm not 100% sure this is the right post... I lost the link I used and had to re-search for it): https://www.loverslab.com/topic/24385-outfit-studiobodyslide-2-cbbe-conversions/?page=78&tab=comments#comment-1173331

 

Load Reference -> From File: "...\mods\CLAMS of Skyrim 4.0\CalienteTools\Bodyslide\SliderSets\CosioHD.osp"

    Won't work that way: you need to load the COSIO project, not just the reference.

 

Import -> From nif: "...\mods\DEM Ritual by Krista with CBBE Curvy HDT Bodyslide by Avalon24\CalienteTools\BodySlide\ShapeData\DEM Ritual\DEM Ritual Gown without skirt\DEMRitualGownWithoutSkirt.nif" (there was no such file in the meshes folder).

    Good so far.

I did all the slider fiddling to make the shapes fit -> SetBase. A tiny touch-up with the reduce Mesh tool.

    You don't need to set anything as reference, if that's what you're saying.

Then I deleted BaseShape, the original CBBE body of the outfit.

    You should delete the base shape before you do any bone copying; it serves no purpose and it sounds like it's giving you problems.

 

I just tried it a moment ago, and it worked perfectly.  Here's what I did:

1. Load project CosioHD.osp
2. Import > From NIF > DEM Ritual Gown without Skirt Cos.nif
3. Delete CosioBaseHiPoly_outfit
4. Select LBTop, LBBottom, and LBSkirtGem; Shape > Copy Bone Weights
5. Slider > Conform All
6. Save Project as

[NoNickNeeded]

That worked! Thanks!

 

... to a point. Just one final flaw to work out.

 

In OS and BS I can see the inner parts of the vagina, but ingame they are gone and the vagina animation doesn't work either (while wearing the outfit - it works fine when naked). I put the outfit to revealing in SOS.

 

Any ideas how to get the vagina to work with that outfit on?

[brewmasterhal]

59 minutes ago, NoNickNeeded said:

That worked! Thanks!

 

... to a point. Just one final flaw to work out.

 

In OS and BS I can see the inner parts of the vagina, but ingame they are gone and the vagina animation doesn't work either (while wearing the outfit - it works fine when naked). I put the outfit to revealing in SOS.

 

Any ideas how to get the vagina to work with that outfit on?

 

ingame they are gone

    Sounds like something else is displaying the standard CBBE body instead.

[tuxagent7]

3 hours ago, zzlaq1 said:

  b4 look at the tri, select the shape name in the upright corner, use enlarge brush, to fit the clip

 

stuck here

[NoNickNeeded]

1 hour ago, brewmasterhal said:

 

ingame they are gone

    Sounds like something else is displaying the standard CBBE body instead.

But what?

I have the bodyslide files in the mod with the highest priority... hell I even tried putting the files into the games actual Data folder in steamapps but without any change, so what could possibly overwrite the body within the .nif? Oh and I did rebuild with BS, so it's not any outdates .tri or somesuch either.

 

Unelss the problem comes from something within the .esp file, I'm completely out of ideas.