Being a Cow

[ArcaneRealm]

Hey i'm using the bhunp body type and the textures and morphs are not working

[Galactase]

3 hours ago, Wut1969 said:

 

 

 

 

To avoid confusion, as English isn't my first language, these are the settings I use;

 

  Reveal hidden contents

ScreenShot9.bmp 546.8 kB · 3 downloads

  Reveal hidden contents

ScreenShot10.bmp 546.8 kB · 1 download

  Reveal hidden contents

ScreenShot11.bmp 546.8 kB · 0 downloads

  Reveal hidden contents

ScreenShot12.bmp 546.8 kB · 0 downloads

  Reveal hidden contents

ScreenShot13.bmp 546.8 kB · 0 downloads

  Reveal hidden contents

ScreenShot14.bmp 546.8 kB · 2 downloads

 

I want my PC to turn into a very, very heavy somewhat cowish warrior, not into a very cowish cow.  So I disabled the fur, hooves, tail and as much of the mutations as I could.

 

Edit; scaling at 30% may have been a bit too much, I hope the images are still viewable.

 

 

I may be wrong, but I think until you actually get those mutations (fat, slow metabolism) past stage 10, your weight will act as BAC would normally treat it. All of those mutations in that menu only show up 1-2 at a time for every cow level past 10. If you aren't above cheating you could drink the mutagen potion and save scum until you get one of the fat mutations earlier.

[Wut1969]

26 minutes ago, Galactase said:

I may be wrong, but I think until you actually get those mutations (fat, slow metabolism) past stage 10, your weight will act as BAC would normally treat it. All of those mutations in that menu only show up 1-2 at a time for every cow level past 10. If you aren't above cheating you could drink the mutagen potion and save scum until you get one of the fat mutations earlier.

I hadn't thought about it, but I see your point about the mutations not showing up early. I'm not above cheating, but I kinda wanna see how things develop by themselves.   

But do you have any idea why the weight bonus is negative?  I would have thought that all cows are heavier than humans, even slim cows.

 

 

[Galactase]

1 hour ago, Wut1969 said:

I hadn't thought about it, but I see your point about the mutations not showing up early. I'm not above cheating, but I kinda wanna see how things develop by themselves.   

But do you have any idea why the weight bonus is negative?  I would have thought that all cows are heavier than humans, even slim cows.

 

 

I do not know why it's negative. The way it does weight is that moving around decreases it and eating increases it, very simply. I don't know the upper and lower boundaries of this, but eating food would start bringing that weight up.

[Wut1969]

19 hours ago, Galactase said:

I do not know why it's negative. The way it does weight is that moving around decreases it and eating increases it, very simply. I don't know the upper and lower boundaries of this, but eating food would start bringing that weight up.

I'm using iNeed, so my PC has been eating and drinking. Oh well, maybe the weight will become positive when the mutations kick in.

Thanks for helping. ?

[Galactase]

7 hours ago, Wut1969 said:

I'm using iNeed, so my PC has been eating and drinking. Oh well, maybe the weight will become positive when the mutations kick in.

Thanks for helping. ?

Sorry I couldn't really find a solution :l

If you end up figuring out, let us know!

[GuruSR]

On 5/1/2021 at 4:22 PM, ArcaneRealm said:

Hey i'm using the bhunp body type and the textures and morphs are not working

 

I'm not sure if the BHUNP body holds the same mesh names, also have you got all of the options on?  According to the mod, UNP textures should work, so I am not sure why they're not working for you, you did rebuild everything with Bodyslide after changing the body type?

 

GuruSR.

[evilbom]

On 5/2/2021 at 3:22 AM, ArcaneRealm said:

Hey i'm using the bhunp body type and the textures and morphs are not working

in SE version is work fine

 

still have problem with hooves feet.... i'm not sure my high heel is  work correct ?

 

 

Spoiler

 

 

Spoiler

 

[GuruSR]

4 hours ago, evilbom said:

in SE version is work fine

 

still have problem with hooves feet.... i'm not sure my high heel is  work correct ?

 

 

  Hide contents

 

 

  Hide contents

 

 

So you're saying you're using the BHUNP body, did the bodyslide for everything and your hooves are still not working, then it is possible that that mesh has missing points making the hooves not show up, it is also possible that the body has extra items making the hooves not work, I looked at the stuff involved in using that mesh (the males have to be altered too, not sure why, but it appears to be so).  Ask on here if there is one that is compatible with the mods Sexlab works with, that could help things out, if not, ask in the general forum to see if anyone has any suggestions.

 

GuruSR.

[LinksSword]

3 hours ago, GuruSR said:

 

So you're saying you're using the BHUNP body, did the bodyslide for everything and your hooves are still not working, then it is possible that that mesh has missing points making the hooves not show up, it is also possible that the body has extra items making the hooves not work, I looked at the stuff involved in using that mesh (the males have to be altered too, not sure why, but it appears to be so).  Ask on here if there is one that is compatible with the mods Sexlab works with, that could help things out, if not, ask in the general forum to see if anyone has any suggestions.

 

GuruSR.

guru did you port your BAC update to SSE? just wondering because i have recently gotten SSE and began modding so if you have that would be great.

[Galactase]

6 minutes ago, LinksSword said:

guru did you port your BAC update to SSE? just wondering because i have recently gotten SSE and began modding so if you have that would be great.

I downloaded his update and just stuck it into SSE as is. It worked perfectly.

[LinksSword]

8 minutes ago, Galactase said:

I downloaded his update and just stuck it into SSE as is. It worked perfectly.

yeah but the meshes were made with LE in mind and of course the tails won't work since it's old hdt physics and not hdt smp.

 

unless those were ported over by someone i'm not taking the chance.

[LatencyRemix]

3 hours ago, LinksSword said:

yeah but the meshes were made with LE in mind and of course the tails won't work since it's old hdt physics and not hdt smp.

 

unless those were ported over by someone i'm not taking the chance.

Not sure if this helps you any,  I did also try to mod SE, But shit gets weird in SE so i went back to LE.  While i was moding SE tho i did see somewhere on LL for a mod for BAC new SMP tails and nose rings, never did get around to trying it out before giving up on SE again

[Galactase]

3 hours ago, LinksSword said:

yeah but the meshes were made with LE in mind and of course the tails won't work since it's old hdt physics and not hdt smp.

 

unless those were ported over by someone i'm not taking the chance.

I've had BAC SE and the update in my load order forever and it's been fine

[LinksSword]

16 hours ago, LatencyRemix said:

Not sure if this helps you any,  I did also try to mod SE, But shit gets weird in SE so i went back to LE.  While i was moding SE tho i did see somewhere on LL for a mod for BAC new SMP tails and nose rings, never did get around to trying it out before giving up on SE again

IF you can find those smp tail and nose rings lmk that sounds amazing.

[LinksSword]

ok so downloaded bac converted to se installed then loaded bac update 2 from guru, installed the smp conversion of the tail and ring. only issue i am having is the feet hooves are invisible for me.

 

 

[LinksSword]

also no sound effects for the 2nd stage of the hooves. which is an issue i also had in LE.

[evilbom]

On 5/4/2021 at 2:45 AM, GuruSR said:

 

So you're saying you're using the BHUNP body, did the bodyslide for everything and your hooves are still not working, then it is possible that that mesh has missing points making the hooves not show up, it is also possible that the body has extra items making the hooves not work, I looked at the stuff involved in using that mesh (the males have to be altered too, not sure why, but it appears to be so).  Ask on here if there is one that is compatible with the mods Sexlab works with, that could help things out, if not, ask in the general forum to see if anyone has any suggestions.

 

GuruSR.

Yup i use BHUNP body

 

1 hour ago, LinksSword said:

ok so downloaded bac converted to se installed then loaded bac update 2 from guru, installed the smp conversion of the tail and ring. only issue i am having is the feet hooves are invisible for me.

 

 

 

weird... you have hand hooves but feet not show up ? hm... never got this issue before

[LinksSword]

35 minutes ago, evilbom said:

Yup i use BHUNP body

 

 

weird... you have hand hooves but feet not show up ? hm... never got this issue before

fixed it for me by using nif optimizer and taking my hoove mesh from my le folder and importing it over se and using the optimizer to convert it over to sse. still got hooves being somewhat under the floor which i guess is because of the lack of hdt High Heels mod.

 

unless someone here has some edits they made to make it work with racemenu high heels otherwise everything is perfectly fine so far.

[Wut1969]

On 5/3/2021 at 4:43 AM, Galactase said:

Sorry I couldn't really find a solution :l

If you end up figuring out, let us know!

I think another mod is winning the weight-watchers contest as the weight seems to stabilise at -40.0000000000000, give or take a few 0's.

Carlotta, who I upgraded to a cow as well, seems to have a slowly but steadily increasing weight as expected.

 

I can't figure out which mod though, I tried disabling the most obvious ones, but that didn't change anything, not even after changing some of BAC's option in order to force a recalculation. Oh well, maybe I'll figure it out eventually.

 

[randomuser123two]

Hey does anyone know the quest IDs or resets to fail/complete them? I would really like to start completetly over with this mod as the enslaved cow quest was bugged for me but don't really know how and the easiest way to get a clean slate seems to be to actually restart all my progression and quest progress I just don't know how to do the quest resets?

[Dark_Dragon_2015]

Ich kann weder bei MME noch BAC Einstellungen vornehmen. Sie werden mir Ingame nicht angezeigt. Kann mir da jemand mal einen Tipp geben.

[evilbom]

ok i found the fix about feet hooves sink into ground because in SE version don't have HighHeel Mod 

so LazyTool Mod can fix the problem

 

now i have another problem how i can fix weight bonus ? because is always get -30up

 

Spoiler

 

 

[GuruSR]

On 5/11/2021 at 12:14 PM, Dark_Dragon_2015 said:

Ich kann weder bei MME noch BAC Einstellungen vornehmen. Sie werden mir Ingame nicht angezeigt. Kann mir da jemand mal einen Tipp geben.

Es gibt eine Möglichkeit, Ihr MCM-Menü zurückzusetzen, um nach neuen Plugins zu suchen und online nach fehlenden MCM-Menüs zu suchen.

 

(Google Translate).

 

There is a way to reset your MCM menu to check for new plugins and check for missing MCM menus online.

 

GuruSR.

[GuruSR]

5 hours ago, evilbom said:

ok i found the fix about feet hooves sink into ground because in SE version don't have HighHeel Mod 

so LazyTool Mod can fix the problem

 

now i have another problem how i can fix weight bonus ? because is always get -30up

 

  Hide contents

 

 

I know about the negative weight bonus issue, I am looking into solving that along the way of doing quest fixes as I go.

 

GuruSR.