Fertile Breeder - TTW Addons

[Kin Tsuchi]

After further investigations I found out that the problem comes from FBDCbreeder.esp
Since I'm not very familiar with FNVedit, I couldn't figure out what to do next.

 

I already tried deactivating tiesthatbind.esp but it's still crashing to desktop. I'm clueless =/

[dborg2]

I hate to say this but if you are basing your conclusion on the first picture alone, you are be wrong.

 

Yellow block/line means 1 change was made, and the last mod has that changed record.

Purple text means. 1st mod to have the original value. Grey means, same value as original, ThickGreen means, made a change and that change is still present in the last mod. (Thick Red means that a change made by this mod, isn't present anymore in the last mod === Mod conflict)

 

Also at the top you can see that the mods have different colored names. These color codes are the same, but then for all changes to a record.

----

Therefor, if you have issues and you are 100% certain that changes to this record are the cause, I'd look at the URWLENB-002-InteriorLighting.esp

 

[Kin Tsuchi]

After I disabled FBDCbreeder.esp I was able to enter the cell “RCHangarDeckMid” again. So that's why I'm guessing that something is conflicting with the FBDCbreeder.esp – however I'm not able to figure out what's conflicting. Especially since (according to FNVedit) FBDCbreeder.esp doesn't edit this specific cell (under "cells"). But maybe I'm missing something here. 

 

Hopefully I haven't said anything too stupid this time. I'm not familiar with FNVedit and resolving problems with that program is completely new to me.

[pepertje]

After I disabled FBDCbreeder.esp I was able to enter the cell “RCHangarDeckMid” again. So that's why I'm guessing that something is conflicting with the FBDCbreeder.esp – however I'm not able to figure out what's conflicting. Especially since (according to FNVedit) FBDCbreeder.esp doesn't edit this specific cell (under "cells"). But maybe I'm missing something here. 

 

Hopefully I haven't said anything too stupid this time. I'm not familiar with FNVedit and resolving problems with that program is completely new to me.

 

I'll look into the issue some more, but here's a couple of standard things you can try:

-Sort load order with LOOT

-Create a merged patch

[Kin Tsuchi]

Now I'm feeling stupid. I've read that Loot doesn't work with TTW. 
Well.. it worked. And Loot helped... I don't know what to say than sorry for the wasted time. Everything works now smoothly. 
Thanks to everybody for the help!

 

This corner right there looks nice. I'm going to shame myself for a round or two or three. 

[pepertje]

Now I'm feeling stupid. I've read that Loot doesn't work with TTW. 

Well.. it worked. And Loot helped... I don't know what to say than sorry for the wasted time. Everything works now smoothly. 

Thanks to everybody for the help!

 

This corner right there looks nice. I'm going to shame myself for a round or two or three. 

 

No need to be ashamed, lots of people forget to use LOOT, it's why it's standard advice. Besides, next time someone has the same problem, they might read this convo and thus find the answer to their problem

[redrahloo]

hey i detected small bug (which is weird cause usually ur quests work perfectly) 

 

FBDS5 "Queen Of The Hive" 

 

when i do the optional and go get c4 i cannot plant the bomb in the hive 

(did this about 5 times - getting mad for an hour or so)

i did whole thing again this time using bomb from mini nuke and the thing worked like a charm

 

just wanted to let you know incase u wanna look into it

(anyway i hope its problem on my end - love ur mods and Jade)

 

 

[NonDrake]

Having issues with A Sunny Day For April.

 

Bourne's dialogue doesn't seem to be appearing half the time. Leading me to be 'stuck' when finding April, and at the Monument, being forced to just wait for something to happen without clues from her as to what I should do or how the dialogue is progressing.

[doctor88]

When it get's to the part after you beat the main part of the game and start the Brotherhood of Steel DLC part and Jade and Captain Bourne are talking in the courtyard Bourne says her first sentence to Jade and nothing else happens i'm stuck in place.

 

[TBDM]

I'm having the same problem as doctor88. The dialogue is stuck and there's nothing I can do as I'm just stuck in place, breaking the game

[NonDrake]

 

When it get's to the part after you beat the main part of the game and start the Brotherhood of Steel DLC part and Jade and Captain Bourne are talking in the courtyard Bourne says her first sentence to Jade and nothing else happens i'm stuck in place.

 

 

I ran into that.

 

Oddly enough, killing and resurrecting them both a few times seemed to work for me.

[doctor88]

 

 

When it get's to the part after you beat the main part of the game and start the Brotherhood of Steel DLC part and Jade and Captain Bourne are talking in the courtyard Bourne says her first sentence to Jade and nothing else happens i'm stuck in place.

 

 

I ran into that.

 

Oddly enough, killing and resurrecting them both a few times seemed to work for me.

 

won't work.

[pepertje]

 

 

 

When it get's to the part after you beat the main part of the game and start the Brotherhood of Steel DLC part and Jade and Captain Bourne are talking in the courtyard Bourne says her first sentence to Jade and nothing else happens i'm stuck in place.

 

 

I ran into that.

 

Oddly enough, killing and resurrecting them both a few times seemed to work for me.

 

won't work.

 

 

I'm currently sifting through it, stay tuned.

For everyone having this issue, could you tell me the following states:

1 Does Jade have a perk? (Ranger/Scribe/Warrior)

2 What is your relationship status with Jade? (Are you already at dating or are you still just friends?)

3 Is Jade on friendly terms with the BoS? (Decided to side with BoS during "No Rest for the Wicked")

 

EDIT: Try the included plugin. Not sure if all goes well, and consider this plugin alpha.

FBJade.esp

[doctor88]

She has warrior perk there dating I had her take the armor off the dead enclave guy The esp won't work for me it loads to the start screen but there are no options.

[TBDM]

I did the same choices as doctor88, I haven't tried that esp yet, I will later today.

 

Edit: That esp did not fix it, although I don't think I was having the problems with it that doctor88 was. I loaded the game fine, but still have the bug

[j6from304]

So, on the quest "Now Rest for the wicked" I went to talk to Captain Bourne about Jade she goes through the dialogue with the player, then walks up to Jade and just freezes there  not moving or speaking or anything... I thought I had to wait and see if anything happened... Well, waited literally 15 minutes and nothing...  This sucks because I really wanna get this quest done...

[NonDrake]

Esp killed the start menu. 

[doctor88]

I tried making different choices with the old esp since the new one doesn't work for me it caused the start menu not to sow up Jade and Captain Bourne still don't finish there conversation there still stuck with the different choices on the old esp.

Edited November 18, 2017 by doctor88

[Vidavian]

Awesome mod, although an issue I've run into is: When I reach the Washington monument, the Hornet says her one line, Bourne mouths something back (I never see her dialogue unless it's in a conversation (general is on)) and then nothing happens. Any idea what's wrong?

 

EDIT: I found that saving and loading after that got it working.

Edited November 27, 2017 by Vidavian

[Vidavian]

Sorry to post again soon, but I've run into an issue where I equip the pregnant space suit when the decompression starts, but then die regardless. Is there a way to fix this? It kills me regardless of whether I equip it manually or if I equip it automatically.

[pepertje]

22 minutes ago, Vidavian said:

Sorry to post again soon, but I've run into an issue where I equip the pregnant space suit when the decompression starts, but then die regardless. Is there a way to fix this? It kills me regardless of whether I equip it manually or if I equip it automatically.

Mothership Zeta actively checks to see if you have a spacesuit equipped from a list. The preg versions aren't on that list. So sadly, the only way as of yet is to use the TGM console command.

[dborg2]

1 hour ago, pepertje said:

Mothership Zeta actively checks to see if you have a spacesuit equipped from a list. The preg versions aren't on that list. So sadly, the only way as of yet is to use the TGM console command.

I haven't been able to test this yet, but the MaternityPackOverkill Addon (TTW) might fix the issue. I haven't been able to test it. You can find the esp on the Maternity Pack Overkill Beta page.

[wurmsrus]

I'm having a weird glitch in the midship deck of rivet city that goes away when I disable FBDCbreeder.esp, only the walls of the hallway or room I'm standing in are visible the others are a light blue void, as soon as I walk thorough a doorway the walls of the room or hallway I went into are visible and the ones from where I came from aren't

 

I'm using version 0.2.6 of dc breeder

load order

 

screenshots

[pepertje]

3 hours ago, wurmsrus said:

I'm having a weird glitch in the midship deck of rivet city that goes away when I disable FBDCbreeder.esp, only the walls of the hallway or room I'm standing in are visible the others are a light blue void, as soon as I walk thorough a doorway the walls of the room or hallway I went into are visible and the ones from where I came from aren't

 

I'm using version 0.2.6 of dc breeder

load order

 

screenshots

Honestly, I'm getting tired of this issue constantly rearing its head again -,-

I think I had it fixed in the most recent version, though. Try this plugin, it's the most recent. If it's fixed, I'll put out an update wave as soon as possible.

FBDCBreeder.esp

[wurmsrus]

10 hours ago, pepertje said:

think I had it fixed in the most recent version, though. Try this plugin, it's the most recent. If it's fixed, I'll put out an update wave as soon as possible.

FBDCBreeder.esp

Sorry that didn't fix it,