D_ManXX2 Posted July 24, 2016 Posted July 24, 2016 Guys with "Baloon penis" issue... What SOS plugin are you using? (regular, floppy, female, strapon...) Does this glitch happen always during same animation (if yes which one?) or at random? Need some more testing to be 100% sure, but i installed floppy this night along with some more sexlab framework stuff, and i noticed a increase in size around the center of the penis. Witch is guess is the "Baloon penis" issue they have been talking about, ill report back if im 100% sure. It also seems that arousal redux kind of messes up the erection event, so ill give that a test run as well while im at it, but floppy seems to be causing issues for sure. Hunting the balloon penis, i derped up the first session forgetting to activate RCAE for floppy so no floppy only shots yet (although i did notice a little increase around the base of the penis i scraped the pics when i realized RCAE wasn't on) Before penetration. 20160724044215_1.jpg *proceeds to penetrated the air below Delphine her pussy* After air penetration, not quite the same angle was to busy checking the air i was penetrating lol, but also not quite the same size either, not really horrible but its getting there the angle of the shot isn't helping for sure. 20160724044317_1.jpg Floppy set to arousal based and hdt on, arousal redux with basically every option enabled (although it seem the sos or animation event settings are the main issue, needs some more consistent testing though). Got really inconsistent results, possible due to changing settings on the fly trying to pin point the issue, i dint have the large difference i had before (although the second one is getting there now) so it seems to be a combination of settings,mods and resize events when moving true animations ? Time to find my bed before i make more bad puns though, i think i bothered Delphine enough for this evening Have you tried using ctrl + pageup key to see if the angle chages to correct position ?? pageup only is for male npc ctrl + pageup is male pc
bufu Posted July 24, 2016 Posted July 24, 2016 Guys with "Baloon penis" issue... What SOS plugin are you using? (regular, floppy, female, strapon...) Does this glitch happen always during same animation (if yes which one?) or at random? Need some more testing to be 100% sure, but i installed floppy this night along with some more sexlab framework stuff, and i noticed a increase in size around the center of the penis. Witch is guess is the "Baloon penis" issue they have been talking about, ill report back if im 100% sure. It also seems that arousal redux kind of messes up the erection event, so ill give that a test run as well while im at it, but floppy seems to be causing issues for sure. Hunting the balloon penis, i derped up the first session forgetting to activate RCAE for floppy so no floppy only shots yet (although i did notice a little increase around the base of the penis i scraped the pics when i realized RCAE wasn't on) Before penetration. 20160724044215_1.jpg *proceeds to penetrated the air below Delphine her pussy* After air penetration, not quite the same angle was to busy checking the air i was penetrating lol, but also not quite the same size either, not really horrible but its getting there the angle of the shot isn't helping for sure. 20160724044317_1.jpg Floppy set to arousal based and hdt on, arousal redux with basically every option enabled (although it seem the sos or animation event settings are the main issue, needs some more consistent testing though). Got really inconsistent results, possible due to changing settings on the fly trying to pin point the issue, i dint have the large difference i had before (although the second one is getting there now) so it seems to be a combination of settings,mods and resize events when moving true animations ? Time to find my bed before i make more bad puns though, i think i bothered Delphine enough for this evening Have you tried using ctrl + pageup key to see if the angle chages to correct position ?? pageup only is for male npc ctrl + pageup is male pc I did yes, but is a no go, it will simply go back to half erect within a second, if you spam it though it makes for some funny animation *edit: Although on the last session it did save the full upwards erection for some reason, but anything below the default state seems to reset to OSA its default. When using arousal the and you enter the scene with a half limb dick, that doesn't seem to happen though. I might give that another go later on today.
ThatOtherGuy69 Posted July 24, 2016 Posted July 24, 2016 Quick Question, Does this version of Osex also come with an MCM menu like the one from NEXUS. And if so, how do I get it to appear. I tried typing in SetStage SKI_ConfigManagerInstance 1
lucaxs Posted July 24, 2016 Posted July 24, 2016 Quick Question, Does this version of Osex also come with an MCM menu like the one from NEXUS. And if so, how do I get it to appear. I tried typing in SetStage SKI_ConfigManagerInstance 1 No.
bufu Posted July 24, 2016 Posted July 24, 2016 Quick Question, Does this version of Osex also come with an MCM menu like the one from NEXUS. And if so, how do I get it to appear. I tried typing in SetStage SKI_ConfigManagerInstance 1 Iff i read it correctly most those functions have been moved to the sidebar menu, you need to press numpad enter to open it.
bufu Posted July 24, 2016 Posted July 24, 2016 Thats still not what some people reported. Arrousal mods in general can be conflicting with OSA if they attempt to scale schlong at the same time. I was thinking floppy SOS does its own scaling so it could be potentialy reason for "Baloon penis" but i just cant get that kind of glitch in my game, for me it all looks fine. It seems you cant get it either so im not sure why it happens for some people. This is how it looked like for one user: so how do i get the position config partlike my characters are off by alot pressing ENTER+3 doesnt do anything See that pretty girl in my signature. Im getting places now, but im kinda cheating to get there, ill get to that in second. First i tried prity much every setting on both SOS and Floppy, making really awkward sizes hoping it would mess up OSA its rescaling. No luck on that so far thought, the re-scale event takes over when starting a scene (as it should so that is working as intended) bringing it back to the OSA desired size for seamless animations. But off course as the good ol fucker i am i could not leave it there, i had to take it to the next level. The next level had quite some trial and error in it though, i had certain stages\moments where i had no more penis at all and just a see through gap around the waist (sadly i dint get a shot of that as i really wanted to get some results). Then suddenly i got something that might be interesting. Now that is getting closer to the monster penis we saw in the picture above, still not quite as big though When going into the penetration event it re-scales to OSA size, but when ending the penetration scene it scales back to the monster cock size. (sorry mean balloon penis ><) But as mentioned before its kinda cheating, cause i simply maxed the size multipliers of SOS itself during that scene before penetrating, and at that point i guess OSA takes that size as the default for that pose\scene state ?? Anyways that the closest i can get to it, Floppy on its own i can not get to scale anything without arousal redux as it seems to not detect an erection event from OSA, but its also possible that with the messing around i managed to brake the mod it settings cause i did tinker quite a lot with both the floppy state settings and the default setting trying to make the scaling change before and during scenes. *edit: i also noticed then when using the sos scale modifiers after the scene ends it doesn't return to the proper scaling i had set before the scene. For example if someone wanted to have a penis of the size in the first pic (although i doubt it seems like a real burden to me lol), it might just return him with a regular sized one after the scene ends.
ThatOtherGuy69 Posted July 24, 2016 Posted July 24, 2016 Quick Question, Does this version of Osex also come with an MCM menu like the one from NEXUS. And if so, how do I get it to appear. I tried typing in SetStage SKI_ConfigManagerInstance 1 Iff i read it correctly most those functions have been moved to the sidebar menu, you need to press numpad enter to open it. Oh thx bro
evilelf Posted July 24, 2016 Posted July 24, 2016 I cant say how good or bad this mod is because of the absolute horseshit way the author circle-jerked evey bit of this goatfuck to prevent all but the most dedicated of computer nerds from being able to find and download the requirements. Definitely deserves a golf clap (or maybe just The Clap) for this one Newsflash: Internet Personality Can't Find Spank Fuel, Freaks Out An anonymous mod user today posted a poorly written tome of displeasure denouncing the lack of simplicity involved with achieving orgasm aided by the Skyrim game-within-game, OSex. "The author circle-jerked evey bit of this goatfuck," opined dpgillam, clearly frustrated, both sexually and emotionally. L33TSP3Ak analysts and bad text messengers spent hours trying to decrypt this portion of the message, but have failed to decipher anything intelligible. It seems the trouble started when gillam saw animated GIFs of OSex in action and found himself immediately aroused. Seeking release and the fulfillment of his long-held cartoon fantasies, he searched high and low for the OSA and OSex 1.084c test build downloads, to no avail. When he could finally take no more, he lashed out at the project's creator, demanding satisfaction. The Givers of the world clearly do not care enough about the Takers, and gillam aims to prosecute his case in the court of public opinion. Developing... This reply delivers. Best response of the year award goes to Migal! You made my morning with a good laugh.
nightshad Posted July 24, 2016 Posted July 24, 2016 this is compatable with sexlab and its mods right Oo. i wont have to delete everything for this to work.
bufu Posted July 24, 2016 Posted July 24, 2016 this is compatable with sexlab and its mods right Oo. i wont have to delete everything for this to work. Yes its compatible, some SL framworks mod might cause scaling issues though keep that in mind, but with the latest releases you can use both frameworks on the same load order without major conflict issues.
nightshad Posted July 24, 2016 Posted July 24, 2016 this is compatable with sexlab and its mods right Oo. i wont have to delete everything for this to work. Yes its compatible, some SL framworks mod might cause scaling issues though keep that in mind, but with the latest releases you can use both frameworks on the same load order without major conflict issues. coool just run FNIS after running this right? its asking to overwrite the stuff from sexlab should i overwrite it Oo? well sexlab still work if i let OSEX overwrite everything
bufu Posted July 24, 2016 Posted July 24, 2016 this is compatable with sexlab and its mods right Oo. i wont have to delete everything for this to work. Yes its compatible, some SL framworks mod might cause scaling issues though keep that in mind, but with the latest releases you can use both frameworks on the same load order without major conflict issues. coool just run FNIS after running this right? its asking to overwrite the stuff from sexlab should i overwrite it Oo? well sexlab still work if i let OSEX overwrite everything yes run FNIS, the overwrite are papyrus files if im not mistaken, it should be mentioned in the FAQ, im using mo and have it loaded below SL frameworks, and both seem to work just fine.
nightshad Posted July 24, 2016 Posted July 24, 2016 this is compatable with sexlab and its mods right Oo. i wont have to delete everything for this to work. Yes its compatible, some SL framworks mod might cause scaling issues though keep that in mind, but with the latest releases you can use both frameworks on the same load order without major conflict issues. coool just run FNIS after running this right? its asking to overwrite the stuff from sexlab should i overwrite it Oo? well sexlab still work if i let OSEX overwrite everything yes run FNIS, the overwrite are papyrus files if im not mistaken, it should be mentioned in the FAQ, im using mo and have it loaded below SL frameworks, and both seem to work just fine. thank you kindly
blueballbob Posted July 24, 2016 Posted July 24, 2016 Thats still not what some people reported. Arrousal mods in general can be conflicting with OSA if they attempt to scale schlong at the same time. I was thinking floppy SOS does its own scaling so it could be potentialy reason for "Baloon penis" but i just cant get that kind of glitch in my game, for me it all looks fine. It seems you cant get it either so im not sure why it happens for some people. This is how it looked like for one user: so how do i get the position config part like my characters are off by alot pressing ENTER+3 doesnt do anything See that pretty girl in my signature. So had Floppy 2.1 installed and got the balooning, but Floppy was causing a conflict with PCEA2, killing my FPS. Removed Floppy and FPS were better and didn't get ballooning either.
nightshad Posted July 24, 2016 Posted July 24, 2016 ALOT of pops up showed up saying my papyrus is outdated after installing this Oo saying i need 3.2 but i have 3.2 @_@ should i ignored it
Carida Posted July 24, 2016 Posted July 24, 2016 ALOT of pops up showed up saying my papyrus is outdated after installing this Oo saying i need 3.2 but i have 3.2 @_@ should i ignored it Actually, make sure that the paprus utility in Sexlab overwrites the one in OSA. As the one in sexlab is always the most recent. And all should work fine. Happy modding. -C
nightshad Posted July 24, 2016 Posted July 24, 2016 ALOT of pops up showed up saying my papyrus is outdated after installing this Oo saying i need 3.2 but i have 3.2 @_@ should i ignored it Actually, make sure that the paprus utility in Sexlab overwrites the one in OSA. As the one in sexlab is always the most recent. And all should work fine. Happy modding. -C so reinstall SexLab after I install this one right?
Carida Posted July 24, 2016 Posted July 24, 2016 ALOT of pops up showed up saying my papyrus is outdated after installing this Oo saying i need 3.2 but i have 3.2 @_@ should i ignored it Actually, make sure that the paprus utility in Sexlab overwrites the one in OSA. As the one in sexlab is always the most recent. And all should work fine. Happy modding. -C so reinstall SexLab after I install this one right? What mod installer are you using? -C
nightshad Posted July 24, 2016 Posted July 24, 2016 ALOT of pops up showed up saying my papyrus is outdated after installing this Oo saying i need 3.2 but i have 3.2 @_@ should i ignored it Actually, make sure that the paprus utility in Sexlab overwrites the one in OSA. As the one in sexlab is always the most recent. And all should work fine. Happy modding. -C so reinstall SexLab after I install this one right? What mod installer are you using? -C NMM and I reinstalled SexLab the messages dont show up again but i got a question. im using a joypad to play skyrim. how do i start the animations LOL um my pc is holding mour but i dont see any controls showing on my screen. should i just wait or is something broken Oo
Carida Posted July 24, 2016 Posted July 24, 2016 ALOT of pops up showed up saying my papyrus is outdated after installing this Oo saying i need 3.2 but i have 3.2 @_@ should i ignored it Actually, make sure that the paprus utility in Sexlab overwrites the one in OSA. As the one in sexlab is always the most recent. And all should work fine. Happy modding. -C so reinstall SexLab after I install this one right? What mod installer are you using? -C NMM and I reinstalled SexLab the messages dont show up again but i got a question. im using a joypad to play skyrim. how do i start the animations LOL Well, I don't know what a joypad is, but as far as I know, if you wish to bind OSA to a new key so you can use it, I believe its F8 that you have to hold for like 5 seconds and than it gives you the option to rebind OSA. I hope that helps. Happy modding. -C
nightshad Posted July 24, 2016 Posted July 24, 2016 ALOT of pops up showed up saying my papyrus is outdated after installing this Oo saying i need 3.2 but i have 3.2 @_@ should i ignored it Actually, make sure that the paprus utility in Sexlab overwrites the one in OSA. As the one in sexlab is always the most recent. And all should work fine. Happy modding. -C so reinstall SexLab after I install this one right? What mod installer are you using? -C NMM and I reinstalled SexLab the messages dont show up again but i got a question. im using a joypad to play skyrim. how do i start the animations LOL Well, I don't know what a joypad is, but as far as I know, if you wish to bind OSA to a new key so you can use it, I believe its F8 that you have to hold for like 5 seconds and than it gives you the option to rebind OSA. I hope that helps. Happy modding. -C sorry im using a http://ecx.images-amazon.com/images/I/61uXK-RvjML._SL1000_.jpg i am not using any custom hud mods other words the Custom UI is not showing so i have no idea what to do
ThatOtherGuy69 Posted July 24, 2016 Posted July 24, 2016 This is the BEST FUCKIN THING EVER! This mod is so well made. Well Done, Bloody Well Done. 10/10 Would Spank Again I don't know what all the fuss is about the difficulty of controlling it is, its actually very easy and easy to learn and use, I'm getting the hang of it very quickly and their are well made directions and tips which is a BONUS, thx for that. Believe it or not, the only thing I am struggling at to achieve it to CANCEL the scene So Any help on that would be nice XD
lucaxs Posted July 24, 2016 Posted July 24, 2016 This is the BEST FUCKIN THING EVER! This mod is so well made. Well Done, Bloody Well Done. 10/10 Would Spank Again I don't know what all the fuss is about the difficulty of controlling it is, its actually very easy and easy to learn and use, I'm getting the hang of it very quickly and their are well made directions and tips which is a BONUS, thx for that. Believe it or not, the only thing I am struggling at to achieve it to CANCEL the scene So Any help on that would be nice XD It should be the dot/Del key on your numpad.
Kinky Posted July 24, 2016 Posted July 24, 2016 Thats still not what some people reported. Arrousal mods in general can be conflicting with OSA if they attempt to scale schlong at the same time. I was thinking floppy SOS does its own scaling so it could be potentialy reason for "Baloon penis" but i just cant get that kind of glitch in my game, for me it all looks fine. It seems you cant get it either so im not sure why it happens for some people. This is how it looked like for one user: so how do i get the position config part like my characters are off by alot pressing ENTER+3 doesnt do anything See that pretty girl in my signature. Im getting places now, but im kinda cheating to get there, ill get to that in second. First i tried prity much every setting on both SOS and Floppy, making really awkward sizes hoping it would mess up OSA its rescaling. 20160724162016_1.jpg No luck on that so far thought, the re-scale event takes over when starting a scene (as it should so that is working as intended) bringing it back to the OSA desired size for seamless animations. But off course as the good ol fucker i am i could not leave it there, i had to take it to the next level. The next level had quite some trial and error in it though, i had certain stages\moments where i had no more penis at all and just a see through gap around the waist (sadly i dint get a shot of that as i really wanted to get some results). Then suddenly i got something that might be interesting. 20160724162846_1.jpg Now that is getting closer to the monster penis we saw in the picture above, still not quite as big though When going into the penetration event it re-scales to OSA size, but when ending the penetration scene it scales back to the monster cock size. (sorry mean balloon penis ><) But as mentioned before its kinda cheating, cause i simply maxed the size multipliers of SOS itself during that scene before penetrating, and at that point i guess OSA takes that size as the default for that pose\scene state ?? Anyways that the closest i can get to it, Floppy on its own i can not get to scale anything without arousal redux as it seems to not detect an erection event from OSA, but its also possible that with the messing around i managed to brake the mod it settings cause i did tinker quite a lot with both the floppy state settings and the default setting trying to make the scaling change before and during scenes. *edit: i also noticed then when using the sos scale modifiers after the scene ends it doesn't return to the proper scaling i had set before the scene. For example if someone wanted to have a penis of the size in the first pic (although i doubt it seems like a real burden to me lol), it might just return him with a regular sized one after the scene ends. Thanks for testing. This pretty much means that OSA is doing good job with scaling so users with baloon schlong have something else (floppy sos or sexlab arroused) messing up with it at the same time.
Syssil Posted July 24, 2016 Posted July 24, 2016 I have been using Osex for a while now and I must say that v. 1.084c is absolutely fantastic! The menu makes it so much easier to direct the scenes, it also has made learning how the various features work much simpler. Thank you so much for continuing your work on this. I look forward to seeing the many possibilities you have created with the OSA framework
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now