boo Posted May 14, 2016 Posted May 14, 2016 Sorry to bring it up again, but was anything going to be done about tails? I updated the 1.08D post with it Boo. It's a ton of work but something i would like to do at some point so I am on board. Not pre 1.08 but I'll see. The time it would take would be massive, maybe I'll look into the details and start working on it here and there at least. That's all anyone could ask for, thanks!
Smoking Atom Posted May 14, 2016 Posted May 14, 2016 @nt95 and Smoking Atom Did you make a clean save and uninstall the previous version before updating? I found with this last update when I removed the previous version I didn't get any "Osex.esp missing" message when loading my save and had to roll back 5 saves before I got the message. Installing the latest after this got it working. This issues I was having sound almost exactly like what you guys are describing. @CEO - Is this: -Save games unloadable if saved with OSex Potentially something to do with the the event that clears any risidual spells on a new load. Maybe triggers to much at once if a lot of NPCs were saved with an ActraCom in one session. Will look into this more but more testing and feedback would be great on this matter. ...the reason that sometimes attempting to load a save results in a black screen and needing to cntl-alt-del out of the game? I've been scratching my head trying to find the pattern that leads to this problem? I'm guessing that the residual spells haven't been wiped and that the result is this "dead" save? If so, I'll continue to poke around looking for the pattern and will post any observations that seem relevant. I uninstalled the old version and installed the new version. Deleted FNIS patch and recreated it. Started a new game. It's just the latest 4.1 patch that is causing the issue with mod-added NPCs. I went through the entire process several times and it failed each time. I then went back to 8.3 and that version worked with no issue. I always use PDT between versions of Osex so that is not the cause of the problem in my case. I have actually got the mod working on rare occasions with npc's that have not worked before but it is somewhat tricky to do. It seems to have something to do with the position of the target or what idles that are performing at the time. Also a big open area does seem to increase chances of connection with the target lady. I have also found better success rate if the target lady is walking which can get a bit awkward at times. If the lady is standing still, sitting or leaning against a wall the mod usually gets stuck at the start.
CEO 0S Posted May 14, 2016 Author Posted May 14, 2016 I patched the 1.08D post with this rounds fixes. http://www.loverslab...-wip/?p=1551376 Here's what is added / changed so you can decide if you want to bother redownloading: Wizard Wish Week Round 2 (Presumed) Wish Come Trues: - Custom Followers now work - Positioning should be 100% perfect now (I made some adjustments to this since the script patch a few days ago, working with Kinky on it. It might not be exact due to the changes let me know.) - Scene will always start on the player location - INI now available @Data\meshes\0SA\_0S\Config.ini - allowMaleGenitalScaling=1 (Set this to 0 if you don't want cock scaling - sortRoleByAnimGender=1 (Set this to 0 if you don't want female actors to be automatically the "sub" actor - Female player characters will start as the sub unless set otherwise in the ini. Wizard Wish Week Round 2 BONUSES UNLOCKED: - A new lifted position is added (Noble). (This will be getting a kiss in wizard wish week also, the exit transition is not 100% yet - Cabooser got polish and one additional spank. (Getting there) Screens: - I had to test fem/fem to see if the genderRole ini option was working and whenever I do that I wind up wasting a lot of time taking screen shots, here there for Pasq fans: more in here -- > ----------------------------------------------------------------------------- Special thanks this round to people helping out big time so I didn't have to do much and a tribute of thanks to some above and beyond contributions of personal time and work to the project in the last few weeks / months. Thank you so much! ARISE Sir Pipdude... Knight of 0S3KSY and my Champion Arise Sir SF... Knight of 0S3KSY Arise Sir Migal... Knight of OS3KSY Arise Sir Kinky... Knight of 0S3KSY Arise Sir Arialynn... Knight of 0S3KSY also found this in my screenshot folder: How sick is that Dusk? (or whatever it was called)
B013 Posted May 14, 2016 Posted May 14, 2016 wow ceo has been hard at work on the mod. can anyone update me on the development?
Smoking Atom Posted May 14, 2016 Posted May 14, 2016 The new demo 4.2 now works for me. !!! Only problem now is people siting in chairs and leaning against walls still freeze the mod. (see my earlier posts). Not sure about people in beds yet but I suspect they will have problems too. Thanks CEO for fixing this. P.S. Confirmed - People in beds don't work either.
dragonbukid Posted May 14, 2016 Posted May 14, 2016 Ran into a bit of a problem, I have sexlab installed (for the threesomes, gangbangs, and creature sex), and when I installed 0sex 1.08d, mod manager prompted me to overwrite MfgConsoleFunc.psc, MfgConsoleFunc.pex, MfgConsole.ini, MfgConsole.dll which was already installed by sexlab and i clicked on no, seeing as I might ruin my sexlab setup and might have to redo everything from scratch. Followed the usual FNIS procedures, went in-game, loaded my save, pressed 'Num 0' while facing thy spouse and voila worked perfectly, with all the UI and initial anims, but I did not know how to navigate so I went to look into the MCM MENU only to find that 0sex was NOT THERE. Apologies for caps. My guess is that it did not register in mcm because I did not install the 0sex mcmconfig files and the game was still using mcmconfig files from sexlab, I'm actually guessing here though, that might not be the cause. Does anyone know how to fix this problem?
Kinky Posted May 14, 2016 Posted May 14, 2016 Ran into a bit of a problem, I have sexlab installed (for the threesomes, gangbangs, and creature sex), and when I installed 0sex 1.08d, mod manager prompted me to overwrite MfgConsoleFunc.psc, MfgConsoleFunc.pex, MfgConsole.ini, MfgConsole.dll which was already installed by sexlab and i clicked on no, seeing as I might ruin my sexlab setup and might have to redo everything from scratch. Followed the usual FNIS procedures, went in-game, loaded my save, pressed 'Num 0' while facing thy spouse and voila worked perfectly, with all the UI and initial anims, but I did not know how to navigate so I went to look into the MCM MENU only to find that 0sex was NOT THERE. Apologies for caps. My guess is that it did not register in mcm because I did not install the 0sex mcmconfig files and the game was still using mcmconfig files from sexlab, I'm actually guessing here though, that might not be the cause. Does anyone know how to fix this problem? Mfg console is included in both mods its not an issue. MCM menu doesnt exist since version 1.08, also not an issue. 0sex and Sexlab are 2 separate things and do not conflict with each other they only share some resources.
dragonbukid Posted May 14, 2016 Posted May 14, 2016 Ran into a bit of a problem, I have sexlab installed (for the threesomes, gangbangs, and creature sex), and when I installed 0sex 1.08d, mod manager prompted me to overwrite MfgConsoleFunc.psc, MfgConsoleFunc.pex, MfgConsole.ini, MfgConsole.dll which was already installed by sexlab and i clicked on no, seeing as I might ruin my sexlab setup and might have to redo everything from scratch. Followed the usual FNIS procedures, went in-game, loaded my save, pressed 'Num 0' while facing thy spouse and voila worked perfectly, with all the UI and initial anims, but I did not know how to navigate so I went to look into the MCM MENU only to find that 0sex was NOT THERE. Apologies for caps. My guess is that it did not register in mcm because I did not install the 0sex mcmconfig files and the game was still using mcmconfig files from sexlab, I'm actually guessing here though, that might not be the cause. Does anyone know how to fix this problem? Mfg console is included in both mods its not an issue. MCM menu doesnt exist since version 1.08, also not an issue. 0sex and Sexlab are 2 separate things and do not conflict with each other they only share some resources. Oh, thanks for clarifying that, hope i'm not being a bother but is there a page here explaining the navigation controls?
SenseyZone Posted May 14, 2016 Posted May 14, 2016 This mod is doing so ffing great! Ultimate job CEO! Can't wait for Nexus's official release! So pumped!
Kinky Posted May 14, 2016 Posted May 14, 2016 1.08 d4.2 Perfect alignment every time Female player starts as sub (but only with male partners) im really happy this is finaly here, although i would prefer if it works for female partners too if female partner is taller. I tested positioning with npc sitting, sleeping... all worked perfect except in one case. I ordered Lydia to sleep and then targeted her for sex, positioning was perfect, my player (female) was dom and Lydia sub, but Lydia was taller (which would be great if her role is dom since she really is taller). More spanks added. Not sure about custom followers since i dont have any. Major things left to be fixed: Slot 31 issue Not Intended actors issue (chickens) Minor issues left to be fixed: Speed descriptions (ill try to catch all remaining ones and report), missing icons, unfinished menus / paths (new cowgirl). Wizard sex - sub actions - blowjob pathways jump to standing prespank (probably unfinished) before continuing to proper animations. METEO ritual alignment and expressions. Papyrus log is puzzling i got different results. One had spam i think that one was before cleaning save game, newest one is almost perfectly clean. Ill do more testing then post log if it catches something.
Ariharu Posted May 14, 2016 Posted May 14, 2016 1.08 d4.2 Perfect alignment every time Female player starts as sub (but only with male partners) im really happy this is finaly here, although i would prefer if it works for female partners too if female partner is taller. I tested positioning with npc sitting, sleeping... all worked perfect except in one case. I ordered Lydia to sleep and then targeted her for sex, positioning was perfect, my player (female) was dom and Lydia sub, but Lydia was taller (which would be great if her role is dom since she really is taller). More spanks added. Not sure about custom followers since i dont have any. Major things left to be fixed: Slot 31 issue Not Intended actors issue (chickens) Minor issues left to be fixed: Speed descriptions (ill try to catch all remaining ones and report), missing icons, unfinished menus / paths (new cowgirl). Wizard sex - sub actions - blowjob pathways jump to standing prespank (probably unfinished) before continuing to proper animations. METEO ritual alignment and expressions. Papyrus log is puzzling i got different results. One had spam i think that one was before cleaning save game, newest one is almost perfectly clean. Ill do more testing then post log if it catches something. Can i ask what schlongs are you using for fem characters? Cuz one i have some probs with alignment.
Kinky Posted May 14, 2016 Posted May 14, 2016 Can i ask what schlongs are you using for fem characters? Cuz one i have some probs with alignment. I dont use any. By perfect alignment i meant initial actor positioning. Im not sure if schlong for females is aligned perfectly in every animation. For males it seems to be perfect except in ritual one. Oh, thanks for clarifying that, hope i'm not being a bother but is there a page here explaining the navigation controls? Numpad is where all your keys for controlling 0sex are. Num0= start Num,= end NUM 4568 are dpad Num7 = yes Num1=no Num9= shift NumEnter=menu If you want to change those keys check the link in my signature.
Derpface1337 Posted May 15, 2016 Posted May 15, 2016 are you planing to do boobjobs you got handjobs why not boobjobs? just a suggestion.
Rangerspock Posted May 15, 2016 Posted May 15, 2016 I have a question, now with demo 2 is this just a patch for demo 1, or a completely new thing?
CEO 0S Posted May 15, 2016 Author Posted May 15, 2016 Hi Kinky, Thanks for this list and the testing. I think this covers just about everything that still needs to be fixed outside of a few more uncommon bugs that are showing up here. Unless more wizard wishes come up, I'd say this is getting close to a final. Here's what's left: - I'm going to finish my wizard wish, and get redressing, eyes shut in kissing, and more reactions to things like penetration back in. - Get the last remaining points you brought up here - See if I can bring back NPC NPC scenes quickly, if it requires a lot of work I'll hold off for now - Make a check system to remove buttons from nav in certain situations. For example I can't release on nexus with bad boys of skyrim animations so need a gate to deactivate those buttons, and also I want undressing to only show applicable choices etc. - Finish the menus I'll launch of nexus after that. The illustrations and animations are always going to be semi unfinished and in development so I think this is fine for now, I don't think i can realistically set a goal to finish every single animation and illustration currently unfinished without goin crazy. Helps to work on new things to break the chore of it. - I can add an effect that selects by height in the event of a tie, for example if there are two females in the scene. This would override the option to make the player always the dom unless they are a female player and can be placed as the sub. I'll have the option just take a bunch of numbers which signify different ways for the script to handle a tie. I have a question, now with demo 2 is this just a patch for demo 1, or a completely new thing? the latest version 1.08D4.2 is standalone and all other osa osex stuff should be removed prior to installing it. are you planing to do boobjobs you got handjobs why not boobjobs? just a suggestion. Yes I will take it on eventually. I avoid the breasts because the size varies to much from user to user and I can't set them to a custom size like I can the cock and hand. i'm playing with idea of limiting the amount of breast related scenes but making a few variations that tie into breast size which would be defined in sexdentity. It still would not be great for exact stuff like nipple activities etc as they could be anywhere. Sex with cleavage is more possible however since scale shouldn't really matter or at least can't be optimized more for one size or the other. I'll see what I can do about working a few in. I have a few things coming up that have priority but then will try to get it. I'm behind on intimacy animations so need to bring back some kissing to keep the mod balanced so that will be next will be a couple more doggy styles I have almost done, doggy female pleasure scene which is almost done too, Kinky's blowjob request, and a few Bad Girls of Skyrim to balance the Bad Boys of Skyrim. Climaxes are high on the list too and will be coming back and expanded soon.
CritikalDissonance Posted May 15, 2016 Posted May 15, 2016 (edited) I uninstalled 1.063, installed 1.08D4.2, and started a new save. Pressing num 0 does nothing, enter doesn't open the menu. I tried putting this at the bottom of my load order, the top, and disabling every plugin except for this. Still no luck. Am I missing something? I'm using Mod Organizer to manage the mods, btw. Edited May 15, 2016 by CritikalDissonance
Llywylln Posted May 15, 2016 Posted May 15, 2016 Having an Issue with 0Sex First off, Love the mod, totally awesome idea and implementation! My Issue isn't 'game stopping' but I do have to reload. After One 0Sex Scene or Session (once I hit the End Key) the characters back away and then the Male actor (My PC for the testing of this) loses his 'gear'. The Groin area becomes Non-Rendered. It seems to happen when the erection should be deflating, so I tested out turning off the Auomanage of Erections but no luck. In order to get the schlong back, I have to totally reload skyrim. I've tried excluding slot 52, no luck. I tried equipping an Item Schlong after the vanishing act and it didn't show up. Not sure if this is related but i'll mention it, after the first scene I tested, I used the SkyUI group button to redress my character but it didn't show up on the actor. In the inventory, he was dressed, but on screen it didn't render the clothing. I had to go into first person and back to 3rd person to see the armor again. I cannot find any work around for getting the schlong back though. Once it warps out it is totally invisible until I reload the game. As for other 'sex' mods, installed, I have Seclab Framework, Defeat, Amorous Adventures. That's it. When I installed 0Sex and it's Patch which I just downloaded today, I got some script overwrite popups and I did a yes to all. After that, I started getting an error from Sexlab because it said my PapyrusUtil wasn't the correct version, so I had to reinstall it over the existing one. I noticed in the interim that 0Sex responded much faster with the old Util which it came packaged with than it did with the new Util, but even so, it still warped the schlong after the End was pressed.
CEO 0S Posted May 15, 2016 Author Posted May 15, 2016 I uninstalled 1.063, installed 1.08D4.2, and started a new save. Pressing num 0 does nothing, enter doesn't open the menu. I tried putting this at the bottom of my load order, the top, and disabling every plugin except for this. Still no luck. Am I missing something? I'm using Mod Organizer to manage the mods, btw. Try this: This is from a mod conflict, called more Immersive Hud II or something like that. It was made weird and makes somel other UI mods have an issue with it, you might still have those files even if you uninstalled it. Uninstall and deactivate more Immersive Hud II go here They are in \Skyrim\Data\Interface\ Delete: hudmenu.swf and hudmenu.gfx Having an Issue with 0Sex First off, Love the mod, totally awesome idea and implementation! My Issue isn't 'game stopping' but I do have to reload. After One 0Sex Scene or Session (once I hit the End Key) the characters back away and then the Male actor (My PC for the testing of this) loses his 'gear'. The Groin area becomes Non-Rendered. It seems to happen when the erection should be deflating, so I tested out turning off the Auomanage of Erections but no luck. In order to get the schlong back, I have to totally reload skyrim. I've tried excluding slot 52, no luck. I tried equipping an Item Schlong after the vanishing act and it didn't show up. Not sure if this is related but i'll mention it, after the first scene I tested, I used the SkyUI group button to redress my character but it didn't show up on the actor. In the inventory, he was dressed, but on screen it didn't render the clothing. I had to go into first person and back to 3rd person to see the armor again. I cannot find any work around for getting the schlong back though. Once it warps out it is totally invisible until I reload the game. As for other 'sex' mods, installed, I have Seclab Framework, Defeat, Amorous Adventures. That's it. When I installed 0Sex and it's Patch which I just downloaded today, I got some script overwrite popups and I did a yes to all. After that, I started getting an error from Sexlab because it said my PapyrusUtil wasn't the correct version, so I had to reinstall it over the existing one. I noticed in the interim that 0Sex responded much faster with the old Util which it came packaged with than it did with the new Util, but even so, it still warped the schlong after the End was pressed. Thanks for the nice comments! This was in issue that happened in 1.06 that took a while to figure out but eventually I believe was due to the NetImmerse script being out of date. I'd start with that as it's 99% chance the fix, you can download it off nexus, "NetImmerse" make sure it is overwriting anything else that might be bringing a copy of NetImmerse. PapyrusUtil is some other bug with another mod or a left over from some older version of OSex I've stopped packaging it with OSex so it doesn't come from here. My mod does use it but I'm depending on users to get it themselves.
Apidae Posted May 15, 2016 Posted May 15, 2016 Everything works great for me, except for the cowgirl position, it just freezes.
Llywylln Posted May 15, 2016 Posted May 15, 2016 OK, so I downloaded Netimmerse Overide 3.4.4 installed it, and ... nope. Still get neutered by the ending. I have the latest version of Papyrus Utils (3.2) and I reinstalled that too just to be sure. I haven't gotten the hang of all the controls yet, especially any key combos that use numbers because they usually don't work. Instead the hotkeys for weapons get triggered. I use the num-5 and num_8 menus mostly and i've gotten some cool animations running. But having to save, and reload the entire game every time I do that is gonna get really irksome. Is there a Schlong reset console command?
CEO 0S Posted May 15, 2016 Author Posted May 15, 2016 I need help please guys, I've been stuck on this for weeks and can't proceed without a solution. If anyone give another set of eyes on this to figure out what is stopping it from working for me: Using this in MiscUtil: scriptname MiscUtil Hidden ; Get an array of files in a given parent directory that have the given extension. ; directory is relative to the root Skyrim folder (where skyrim.exe is) and is non-recursive. ; extension=".nif" to get all .nif mesh files. ; (default) extension="*" to get all files string[] function FilesInFolder(string directory, string extension="*") global native Testing block of code (I stuck it in OnConfigInit for the MCM script to test: debug.messagebox(MiscUtil.FilesInFolder("Data/meshes")) debug.messagebox(MiscUtil.FilesInFolder("Data/meshes/")) debug.messagebox(MiscUtil.FilesInFolder("/Data/meshes")) debug.messagebox(MiscUtil.FilesInFolder("/")) debug.messagebox(MiscUtil.FilesInFolder("Skyrim")) debug.messagebox(MiscUtil.FilesInFolder("Data")) debug.messagebox(MiscUtil.FilesInFolder("/Data")) debug.messagebox(MiscUtil.FilesInFolder("Data/")) debug.messagebox(MiscUtil.FilesInFolder("/Data/")) debug.messagebox(MiscUtil.FilesInFolder("Skyrim/")) debug.messagebox(MiscUtil.FilesInFolder("/Skyrim")) debug.messagebox(MiscUtil.FilesInFolder("/Skyrim/Data")) debug.messagebox(MiscUtil.FilesInFolder("Skyrim/Data/")) debug.messagebox(MiscUtil.FilesInFolder("../")) debug.messagebox(MiscUtil.FilesInFolder("/../")) debug.messagebox(MiscUtil.FilesInFolder("..")) debug.messagebox(MiscUtil.FilesInFolder("/..")) debug.messagebox(MiscUtil.FilesInFolder("Data/meshes", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("Data/meshes/", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("/Data/meshes", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("/", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("Skyrim", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("Data", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("Data/", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("/Data/", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("/Data", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("Skyrim/", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("/Skyrim", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("/Skyrim/Data", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("Skyrim/Data/", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("../", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("/../", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("..", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("/..", ".nif")) debug.messagebox(MiscUtil.FilesInFolder("Data/meshes", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("Data/meshes/", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("/Data/meshes", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("/", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("Skyrim", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("Data", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("Data/", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("/Data/", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("/Data", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("Skyrim/", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("/Skyrim", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("/Skyrim/Data", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("Skyrim/Data/", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("../", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("/../", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("..", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("/..", ".esp")) debug.messagebox(MiscUtil.FilesInFolder("Data/meshes", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("Data/meshes/", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("/Data/meshes", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("/", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("Skyrim", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("Data", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("Data/", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("/Data/", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("/Data", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("Skyrim/", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("/Skyrim", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("/Skyrim/Data", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("Skyrim/Data/", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("../", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("/../", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("..", ".txt")) debug.messagebox(MiscUtil.FilesInFolder("/..", ".txt")) All return just []. Any idea how I can make this find something?
migal130 Posted May 15, 2016 Posted May 15, 2016 All return just []. Any idea how I can make this find something? I'm not seeing it in your latest distribution. The message boxes, that's all you're doing with it currently? Edit: Having perused the vast wealth of documentation on Papyrus Utilities and finding precisely zero examples of the function used in a practical setting, I'm going to guess one of two things. 1. It looks like you've tried every combination imaginable, except one. Perhaps a Windows/DOS-style backslash ( \ ) instead of a URL-style forward slash ( / ) in your directory strings? 2. I'm not sure the message box is going to display anything with just the function call like that, because I don't believe message boxes are designed to display multiple rows in a string array. You might need to do something more like: String[] aFNIShkxFiles = MiscUtil.FilesInFolder("\Data\meshes\actors\character\animations\FNIS", ".hkx") Then display the first file matching the filename extension filter (hkx) like: debug.messagebox(aFNIShkxFiles[1]) or string msgstr = aFNIShkxFiles[1] debug.messagebox(msgstr) Of course, you would need a loop to figure out how many elements were in the array (how many matching files were found), otherwise you could end up trying to display an element that doesn't exist, but I'm just spit-balling here. And this would have to be done for each directory scanned, because it isn't recursive. Also note that I have no idea whether or not the directory string parameter in the FilesInFolder function requires a leading or trailing slash, or neither, or both. This would take a little experimentation. Also worth mentioning the possible risk here as I assume the function is still governed by the 128 element limit.
Kinky Posted May 15, 2016 Posted May 15, 2016 You messed up your 0sex instalation. To fix it do this: 1. Completely uninstall 0sex 2. Run FNIS 3. Go in game and when there is no 0sex MCM menu save the game. 4. Close the game and clean that save. 5. Install only 0sex linked in my signature. 6. Run FNIS 7. Load cleaned save and start from there.
Kinky Posted May 15, 2016 Posted May 15, 2016 Hi Kinky, Thanks for this list and the testing. I think this covers just about everything that still needs to be fixed outside of a few more uncommon bugs that are showing up here. Unless more wizard wishes come up, I'd say this is getting close to a final. Here's what's left: - I'm going to finish my wizard wish, and get redressing, eyes shut in kissing, and more reactions to things like penetration back in. - Get the last remaining points you brought up here - See if I can bring back NPC NPC scenes quickly, if it requires a lot of work I'll hold off for now - Make a check system to remove buttons from nav in certain situations. For example I can't release on nexus with bad boys of skyrim animations so need a gate to deactivate those buttons, and also I want undressing to only show applicable choices etc. - Finish the menus I'll launch of nexus after that. The illustrations and animations are always going to be semi unfinished and in development so I think this is fine for now, I don't think i can realistically set a goal to finish every single animation and illustration currently unfinished without goin crazy. Helps to work on new things to break the chore of it. - I can add an effect that selects by height in the event of a tie, for example if there are two females in the scene. This would override the option to make the player always the dom unless they are a female player and can be placed as the sub. I'll have the option just take a bunch of numbers which signify different ways for the script to handle a tie. Yeah you are pretty close now to making this nexus friendly. (speaking of which, you might want to change the name of your mod or create new one there since its difficult to find it with this current nexus name: 0S3SEKSY -its Zero so people starting search starting with O will not find it -people trying to search for sex or sexy will also not find it -average random person can't remember that coded name so easily ) I see that you are still on idea to scan for animation files in order to disable buttons but there might be simpler alternative way. Although idk anything about papyrus I believe migal is right and message box is displaying array "[]" just not its content coz it wasnt specified what element of an array to display. Anyway what you are trying to do here could be related to chicken issue (you want it there only not enabled every time.) So here are just a few ideas. Use what you find usefull. Instead of scanning for all animations you could search for specific one that you do not want to be displayed (the one that enters into new path of animations that are not nexus friendly). You could do that by searching for all physical files like you are trying to do now or you could do it by checking xml for its filename. For chickens you will have to implement if actor is animal check then if it is you could check for xml file or "animal".ini file to see if that actor has animations enabled (if "Chicken=1" is inside ini) and if all is true start the scene otherwise show debug message invalid actor and end 0sex. For girl on girl action ini settings that you created in last release (1.08d 4.2) are already doing half of the job. Extra ini setting to check for original height and determine roles by that is other half of it (not really override of it, more like extra if check). Actor1 same gender but taller then actor 2 means your gender ini settings applies and height ini setting doesnt Actor1 same gender and height as actor 2 again only your gender settings applies. Actor 2 same gender but taller then actor 1 - asign opposite roles before positioning actors.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now