CLAMS OF SKYRIM PROJECT Inni Outie HDT Vagina

[noreg]

On 4/12/2019 at 3:46 PM, tsnootch said:

Hey scivirus...I've been converting more armors to the COSIO HD body.  A few problems though:

 

1.  There is an armor piece I have converted and the original piece is an HDT piece with a little bowtie on the back that ties up the corset on the armor.  When I convert this armor to the COSIOHD by copying all the bone weights over, and I check the armor in game, the HDT on the little bowtie is gone and it's just static.  Same goes with an HDT dress I tried to convert, it lost it's HDT movement on the skirt portion.  Is there a way I can convert these to COSIOHD without losing the little HDT movement on those parts of the armors? 

 

2.  Straps....horizontal straps between the breasts on bra pieces look fine when I finish them in outfit studio, but when I look at them in bodyslide on my own character's preset, the middle of the strap is usually stretched from the center of the sternum.  Am I supposed to somehow "protect" straps like this in outfit studio to prevent them from deforming?  Or is the key to just avoid touching the straps at all?

to 1. seems to be a problem with the xml. Have you checked the Error Log?

Sometimes you have to change names of bones and collisionshapes.

 

to 2. that is something i noticed too. manly the ssh-slider seems to be the bad boy, but i found no way to maintain the shape without the deforming.

 

I tried to make a special tawoba-ebony-bikini.. and ran into this issue.

 

CosioHd baseshape zero slider, everything looks fine

 

 

 

With SSH the deformation gets visible

 

 

 

 

In combination with certain sliders the problem 's "bigger"

 

 

 

[Stryker1177]

2 hours ago, scivirus said:

the thing on the hip is an texture issue  it the Vagina texture overlapping ..but i see also the hands are not  correct  i think its been over written buy something else hence the seem gap  ..look up i think all add Hands Bodyslide data for next patch to stop that ..to fix it reinstall cosio or run a batch build and look for CT77 hands ..as for the other stuff ill have to look in to it .textures on defuse maps or the colour maps  are not my strong suit so forgive me if i take some time to address this

 

2 hours ago, scivirus said:

the thing on the hip is an texture issue  it the Vagina texture overlapping ..but i see also the hands are not  correct  i think its been over written buy something else hence the seem gap  ..look up i think all add Hands Bodyslide data for next patch to stop that ..to fix it reinstall cosio or run a batch build and look for CT77 hands ..as for the other stuff ill have to look in to it .textures on defuse maps or the colour maps  are not my strong suit so forgive me if i take some time to address this

Looking over what I have loaded. I just found the Full Remodel Armor Mod is missing the Bodyslide directory so the ShapeData and SliderSets are not installed where they are supposed to be. Which now make sense as to why CT77 hands was not an option to select when building the outfits. Sorry just read your post on remodeled armor about this issue from 2/2. He still hasn't fixed either of the files for download yet.

[Guest]

4 hours ago, noreg said:

to 1. seems to be a problem with the xml. Have you checked the Error Log?

Sometimes you have to change names of bones and collisionshapes.

 

to 2. that is something i noticed too. manly the ssh-slider seems to be the bad boy, but i found no way to maintain the shape without the deforming.

 

I tried to make a special tawoba-ebony-bikini.. and ran into this issue.

 

CosioHd baseshape zero slider, everything looks fine

 

 

 

With SSH the deformation gets visible

 

 

 

 

In combination with certain sliders the problem 's "bigger"

 

 

 

ye i know that part  keep the middle part of the strap at zero as it should not move at all  so no Data ..Remember to use the smooth option  ..Holding Shift and  then brush over the  area ..it will try to balance the mesh ..but  add a mask on the middle vertex so it cannot be be moved ..if it has date  mask it and then invert the mask ..clear the slider data  ..its a very tricky part and requires some creativity ..i would  try removing all slider data from the vertex located on the middle of the  strap ..but also it a combo of the slider and weights  that's causing the  deform .lets say you are editing the left breast bones ..add some more weights  so it extends to the right side as well  but use the smooth  function  by Holding Shift  to balance the weights out nd let teh fade out to the  right side  ..not sure how i can explain to you in text ..i am planing to stream at some point then i can show that part...

 

Ps im pretty sure the converted oufit  has lost its xml link even if it has has a string data on it ..The base body has it own and will take priority  ..so he needs to add the string to the other 3 cosio is running ..BUt as i said  that  dress is papyrus worst night mare

[Guest]

1 hour ago, Stryker1177 said:

 

Looking over what I have loaded. I just found the Full Remodel Armor Mod is missing the Bodyslide directory so the ShapeData and SliderSets are not installed where they are supposed to be. Which now make sense as to why CT77 hands was not an option to select when building the outfits. Sorry just read your post on remodeled armor about this issue from 2/2. He still hasn't fixed either of the files for download yet.

hmm i have send  him corrected version of that ..but im planning  to redo it anyway ..some detail problems . and will stream it while im doing it

[dankmemesxd]

Hi, didnt touch skyrim for a while. So can I still use bodyslide to make the armors shape of cosio in this game? Or will bodyslide only work for those original sliders and those sliders added by CosioHD will stick out?

[Guest]

15 minutes ago, dankmemesxd said:

Hi, didnt touch skyrim for a while. So can I still use bodyslide to make the armors shape of cosio in this game? Or will bodyslide only work for those original sliders and those sliders added by CosioHD will stick out?

ye man it easier even now ...oyu can now juts open the cosiohd project and simple add teh project it will import all the nifs  with it sliders intact even  sliders that cosio does not have including  bones  cosio does not have .. you just have to cop y cosio bones and sliders  do some fine tuning  done

[SuperNixon]

On 4/9/2019 at 11:19 AM, goremageddon said:

clothed.bmpnaked.bmpSaving the preset with armor didnt change anything. NPCS are the same. Next strange thing is I never got the panties from this conversion mod of the clothes to show.

 

In case this hasn't been answered yet: from what I understand is the panty part of the armor is not showing up in game despite using the full conversion? If thats the case make sure you have the esp files from the CT77 mod installed and checked in your load order otherwise the panty part will not show.

 

On another note: how do I get a panty or underwear part to conform to the groin slider? For some reason every other part of the armor works fine but for some reason the groin size slider under Clams of Skyrim causes the body to clip through the lower part.

[tsnootch]

7 hours ago, scivirus said:

ye i know that part  keep the middle part of the strap at zero as it should not move at all  so no Data ..Remember to use the smooth option  ..Holding Shift and  then brush over the  area ..it will try to balance the mesh ..but  add a mask on the middle vertex so it cannot be be moved ..if it has date  mask it and then invert the mask ..clear the slider data  ..its a very tricky part and requires some creativity ..i would  try removing all slider data from the vertex located on the middle of the  strap ..but also it a combo of the slider and weights  that's causing the  deform .lets say you are editing the left breast bones ..add some more weights  so it extends to the right side as well  but use the smooth  function  by Holding Shift  to balance the weights out nd let teh fade out to the  right side  ..not sure how i can explain to you in text ..i am planing to stream at some point then i can show that part...

@noreg

Yeah, this worked for me for the most part on the horizontal bra straps.  It took several attempts to get the small amount of masking I needed on just the middle of the bra strap, then I weighted and weight smoothed.  Still there was some stretching on just the outter edges of the middle of the bra strap.  So, I kept the tiny middle of the strap masked, then I clicked on the edit mode for just the SSH slider maxing out the slider, and then used the normal smooth and move brush to move them back into alignment, or at least close to alignment.  Then I clicked on the edit mode button for each slider and did the same move/smooth the mesh around the masked middle spot for each breast slider.  But, it does seem that trying to do this with too many sliders makes all the previous ones done slightly wonky.  So, I guess the strategy is to just focus on the the boob sliders you use most.  For me, it's usually just SSH and some gravity ones.

 

@scivirus

Once again, thank you very much for the help using outfit studio.  I was a complete noob before you helped me, now I'm a slightly less nooby noob with big dreams....or just dreams of big tits in skimpy armor.

[goremageddon]

18 hours ago, SuperNixon said:

In case this hasn't been answered yet: from what I understand is the panty part of the armor is not showing up in game despite using the full conversion? If thats the case make sure you have the esp files from the CT77 mod installed and checked in your load order otherwise the panty part will not show.

 

On another note: how do I get a panty or underwear part to conform to the groin slider? For some reason every other part of the armor works fine but for some reason the groin size slider under Clams of Skyrim causes the body to clip through the lower part.

I figured it out some days ago, the panties disappeard because of Devious Devices Item Hider. Deactivated Chastity belt and then there were panties

 

[noreg]

On 4/14/2019 at 10:02 PM, scivirus said:

ye i know that part  keep the middle part of the strap at zero as it should not move at all  so no Data ..Remember to use the smooth option  ..Holding Shift and  then brush over the  area ..it will try to balance the mesh ..but  add a mask on the middle vertex so it cannot be be moved ..if it has date  mask it and then invert the mask ..clear the slider data  ..its a very tricky part and requires some creativity ..i would  try removing all slider data from the vertex located on the middle of the  strap ..but also it a combo of the slider and weights  that's causing the  deform .lets say you are editing the left breast bones ..add some more weights  so it extends to the right side as well  but use the smooth  function  by Holding Shift  to balance the weights out nd let teh fade out to the  right side  ..not sure how i can explain to you in text ..i am planing to stream at some point then i can show that part...

 

Ps im pretty sure the converted oufit  has lost its xml link even if it has has a string data on it ..The base body has it own and will take priority  ..so he needs to add the string to the other 3 cosio is running ..BUt as i said  that  dress is papyrus worst night mare

i'm sorry but i really don't know how to do this.. everything i tried makes the things worse.

Could it be that you have already converted that bra? ?

[noreg]

17 hours ago, tsnootch said:

@noreg

Yeah, this worked for me for the most part on the horizontal bra straps.  It took several attempts to get the small amount of masking I needed on just the middle of the bra strap, then I weighted and weight smoothed.  Still there was some stretching on just the outter edges of the middle of the bra strap.  So, I kept the tiny middle of the strap masked, then I clicked on the edit mode for just the SSH slider maxing out the slider, and then used the normal smooth and move brush to move them back into alignment, or at least close to alignment.  Then I clicked on the edit mode button for each slider and did the same move/smooth the mesh around the masked middle spot for each breast slider.  But, it does seem that trying to do this with too many sliders makes all the previous ones done slightly wonky.  So, I guess the strategy is to just focus on the the boob sliders you use most.  For me, it's usually just SSH and some gravity ones.

 

 

Unfortunately i needed those sliders for creating UUNP-BAMFTNA-Body lookalike shape, but i will keep that in mind for future projects.

I'm sorry but i'm totally lost with this. Perhaps you know (an easy to understand) video for explanation how to do this?

[Guest]

2 hours ago, noreg said:

i'm sorry but i really don't know how to do this.. everything i tried makes the things worse.

Could it be that you have already converted that bra? ?

No that one no  but im planing to make a stream on discord .i am just  testing a few things and my internet ..then i will show how to address those problems...OUtfit studio is seriously powerful tool an you can have great effects  with physics if done correctly

[Guest]

3 hours ago, goremageddon said:

I figured it out some days ago, the panties disappeard because of Devious Devices Item Hider. Deactivated Chastity belt and then there were panties

 

ye its a pain  i remove all if those and reset it to the defaults

[dankmemesxd]

So I got my setup, currently testing. What I observed when penetrated by big like troll or giant penises the vagina flips out. It keeps moving really fast and is not "stable" so to say. Any idea what could cause that? It also isnt responding to male and female fingers.

[aseta273]

@scivirus
Any future plans for this mod??

[Irokangi]

I'm sure this is a stupid question but, when i load into the game my characters body is black unless i get close to a wall and it turns into skin tone again, why is that?

[Guest]

3 hours ago, aseta273 said:

@scivirus
Any future plans for this mod??

Yes

[Guest]

1 hour ago, Irokangi said:

I'm sure this is a stupid question but, when i load into the game my characters body is black unless i get close to a wall and it turns into skin tone again, why is that?

hmm that's normally indication of running out of Vram or a bad Texture  ..what texture mod are you using  ..Fair skin perhaps

[Irokangi]

Ok i figured out how to get the character black skin off. Now my problem is that any skin texture I use is the same bland boring skin. I am positive i picked the sweaty skin, and its still the same vanilla looking skin with ugly brownish nipples.

 

[Guest]

10 hours ago, dankmemesxd said:

So I got my setup, currently testing. What I observed when penetrated by big like troll or giant penises the vagina flips out. It keeps moving really fast and is not "stable" so to say. Any idea what could cause that? It also isnt responding to male and female fingers.

the Troll Shlong collsion points is probably  massive  ..i find some of them  3 times bigger then the shlong it self ..i guess to  insure collision in any animation ..the fingers thing  is the same deal really  except  the finger collision point are the same size as the finger ..so in some animations  they don't get close enough i have made it bigger for that reason for the next update  ...So think of it this way ..The Vagina is quivering due to the massive girth .don't expect anything to run perfect or or behave perfect in Skyrim

[aseta273]

1 hour ago, scivirus said:

Yes

Would you care to share a little or even a tease on what is upcoming to keep me/everyone sated please??  ???

[dankmemesxd]

2 hours ago, scivirus said:

the Troll Shlong collsion points is probably  massive  ..i find some of them  3 times bigger then the shlong it self ..i guess to  insure collision in any animation ..the fingers thing  is the same deal really  except  the finger collision point are the same size as the finger ..so in some animations  they don't get close enough i have made it bigger for that reason for the next update  ...So think of it this way ..The Vagina is quivering due to the massive girth .don't expect anything to run perfect or or behave perfect in Skyrim

I also observed that the vagina is spazzing out even with smaller schlongs

Using xmls from bazingas preset is not giving the quivering that your preset does. I dont really know how to configure hdt, so I replaced yours hdtvagina files with his and it seems to work, so I have your nice body physics, but his vagina. You did a lot of work and I dont want to talk bad about this mod, because its great but you might look into the vagina hdt files and see what causes the spazzes.

[Dojo_dude]

This got updated,  but same version? I already have 5.1.7 or.. do I?

[Guest]

8 hours ago, dankmemesxd said:

I also observed that the vagina is spazzing out even with smaller schlongs

Using xmls from bazingas preset is not giving the quivering that your preset does. I dont really know how to configure hdt, so I replaced yours hdtvagina files with his and it seems to work, so I have your nice body physics, but his vagina. You did a lot of work and I dont want to talk bad about this mod, because its great but you might look into the vagina hdt files and see what causes the spazzes.

 you are talking about the CLit  giggle I think  same bones will also collide with the shlong maybe i should change the its ID  and let it only collide with hands

fingers and mouth ..

 

PS i removed collision to the clit from the shlong and it its terribly boring  and plastic  looking so it stays  if it spazzing  as wildly  i would look in to  you papyrus it might by to busy  ...try to look into you mods and look if they are logging errors  and stuff ..Devious devices  for example does it be default and  clogs up Papyrus and then Havok  cannot do  proper calculations  for physics

[Guest]

24 minutes ago, Dojo_dude said:

This got updated,  but same version? I already have 5.1.7 or.. do I?

IF i update i will let you know .LL will announce any changes does not mean there is an update ..i might made corrections on spelling mistakes .last time  i left new instruction to convert armor to Cosio