Jump to content

Recommended Posts

Posted
On 11/3/2024 at 2:32 PM, deathmorph said:

I just noticed that facial cum is not getting washed off. Any idea why this might be? I use Commonwealth Moisturizer.

 

 

 

Sorry about taking so long to respond but I did not get a notification that anyone had posted here.  Do you still have this issue with facial cum?

 

 

Posted
12 hours ago, GrimGrim31 said:

Sorry about taking so long to respond but I did not get a notification that anyone had posted here.  Do you still have this issue with facial cum?

 

No problem. Thanks for getting in touch.


Yes, the problem still exists. Specifically, with semen ingested via collected bottles. In the Latex Collar mod. I'm not sure about the Better Living Through Cumshots mod, since I hardly ever use the bottles. But definitely with the Latex Collar Mod. The semen stays in the face, even after washing. Only when "normal" sexual intercourse occurs, with semen, is it washed away along with the new semen.

Posted
1 hour ago, deathmorph said:

 

No problem. Thanks for getting in touch.


Yes, the problem still exists. Specifically, with semen ingested via collected bottles. In the Latex Collar mod. I'm not sure about the Better Living Through Cumshots mod, since I hardly ever use the bottles. But definitely with the Latex Collar Mod. The semen stays in the face, even after washing. Only when "normal" sexual intercourse occurs, with semen, is it washed away along with the new semen.

 

I will have to ask the mod author of Commonwealth Moisturizer for a solution.  My mod uses a cleaning function from Commonwealth Moisturizer to clean the semen meshes that are applied by that mod.  

 

 

Posted
6 minutes ago, GrimGrim31 said:

I will have to ask the mod author of Commonwealth Moisturizer for a solution.  My mod uses a cleaning function from Commonwealth Moisturizer to clean the semen meshes that are applied by that mod.  

 

 

Thank you very much :beer:

Posted
3 minutes ago, GrimGrim31 said:

 

I will have to ask the mod author of Commonwealth Moisturizer for a solution.  My mod uses a cleaning function from Commonwealth Moisturizer to clean the semen meshes that are applied by that mod.  

 

 

 

If you're using the standard cleaning API, it should work the same as taking a shower or using CM's debug menu. 

 

Last I looked, LCC uses its own internal function (rather than CM's API) to apply facial cum when drinking directly from a bottle. CM may not recognize that there's any cum to remove until a facial is added via CM's own functions.  

Posted
10 hours ago, spicydoritos said:

 

If you're using the standard cleaning API, it should work the same as taking a shower or using CM's debug menu. 

 

Last I looked, LCC uses its own internal function (rather than CM's API) to apply facial cum when drinking directly from a bottle. CM may not recognize that there's any cum to remove until a facial is added via CM's own functions.  

 

Yes, I am using your API to clean your cum meshes.  

 

@deathmorph, you should raise your issue with the mod author of LCC and ask him/her to use the Commonwealth Moisturizer API to apply the facial cum.  If the mod author does not change their method of applying the cum meshes, Spicy's mod, Commonwealth Moisturizer, cannot recognize the mesh when the cleaning function is called by my mod.

 

 

Posted
On 6/18/2025 at 9:14 PM, GrimGrim31 said:

 

Yes, I am using your API to clean your cum meshes.  

 

@deathmorph, you should raise your issue with the mod author of LCC and ask him/her to use the Commonwealth Moisturizer API to apply the facial cum.  If the mod author does not change their method of applying the cum meshes, Spicy's mod, Commonwealth Moisturizer, cannot recognize the mesh when the cleaning function is called by my mod.

 

 

 

I updated this per @spicydoritos instructions, hopefully it helps

  • 1 month later...
Posted

IDEA 1... New Tab in Pipboy... Cleaning

 

As opposed to using the Junk Section. Nobody has added a Cleaning Tab, as far as I know...

 

 

IDEA 2... Shower Wash... Constructible Settlement Item, for permanent use in Settlement Showers, just PLACE it in the broken shower cubicles.

 

Bottle... Bigger item, for Showers. Easy to see.

Handwash... Bigger item, for Kitchens Counters and Sinks. Easy to see.

 

I don't know if there any junk items you can use as Shower Wash and Hand Wash Bottles.

 

 

Just a couple of ideas, for a permanent Shower Area, in your settlements. As I like building stuff in Settlements...

Posted

The mod is perfect. I love it. Logically, I just wish that washing required more than just a bar of soap. Either there's water in your inventory, water nearby (a lake, stream, puddle), or it's just raining. That would significantly increase the immersion.

  • 2 months later...
Posted (edited)

Version 2.2 of MWoW is now available for download.

 

This version further modifies the constructible Decon Arch to make it more intuitive.  The red push button gives you two options:  Wash Yourself and Turn On/Off.  When you build the arch in your settlement, it is turned off.  When you wash yourself, the arch automatically turns off when washing is complete. 

 

The constructible Decon Arch is in the Workshop Build Menu in Power>Miscellaneous (The one to the right of the Light Bulb icon).

 

I also made it possible to craft a Thirstzapper in the Chem Workbench (Utility submenu) so you can start washing your NPCs without having to use the console or walk all the way to NukaWorld.

 

 

Just a reminder that this mod works with pre-NG, NG, and Anniversary Edition FO4.  This is a small stable mod and it doesn't have the ba2 archives or .dll files that have difficulty every time Todd updates the game.

 

 

Edited by GrimGrim31
Posted
On 8/17/2025 at 7:11 PM, deathmorph said:

The mod is perfect. I love it. Logically, I just wish that washing required more than just a bar of soap. Either there's water in your inventory, water nearby (a lake, stream, puddle), or it's just raining. That would significantly increase the immersion.

 

It makes more sense for people to role play the water requirement.  I can make purified water a requirement in the player inventory if it is not raining, but the other water sources are either not detectable (puddles) or would require such a heavy script load to detect (lake or stream) that the cost outweighs the immersion value.

Posted
On 8/14/2025 at 4:58 PM, Krazyone said:

IDEA 1... New Tab in Pipboy... Cleaning

 

As opposed to using the Junk Section. Nobody has added a Cleaning Tab, as far as I know...

 

 

IDEA 2... Shower Wash... Constructible Settlement Item, for permanent use in Settlement Showers, just PLACE it in the broken shower cubicles.

 

Bottle... Bigger item, for Showers. Easy to see.

Handwash... Bigger item, for Kitchens Counters and Sinks. Easy to see.

 

I don't know if there any junk items you can use as Shower Wash and Hand Wash Bottles.

 

 

Just a couple of ideas, for a permanent Shower Area, in your settlements. As I like building stuff in Settlements...

 

Interesting ideas.  Showers are well covered by two other mods (CWSS and Build Your Own Pool) in conjunction with Megaruru's WoTC mod, but I don't think they have shower wash bottles or handsoap bottles.

 

I will think about it, but my mod making time is consumed with my other mod right now.  

 

 

 

 

 

 

Posted (edited)

Does it wash away blood? I'm asking because today I tried to take a shower with CWSS shower and blood (Enhance Blood Texture) wasn't washed off and I was sad. 

Edited by 4nln415
Posted
1 minute ago, 4nln415 said:

Does it wash away blood? I'm asking because today I tried to take a shower with CWSS shower and blood wasn't washed off and I was sad. 

 

Which mod adds the blood?  If I know where the blood comes from, I can work out how to make my supersoap remove it.

Posted
3 minutes ago, GrimGrim31 said:

 

Which mod adds the blood?  If I know where the blood comes from, I can work out how to make my supersoap remove it.

It's mostly from Enhance blood textures I think but my conflict list is a mess 

Spoiler

image.png.716e55e0893c7dbd81794c5497541df5.png

 

Posted

I going to try this! I have Get Dirty, CWSS and Universal CWSS installed but sometime it would be nice to wash in the rain when you've been away from a while. 

Posted
1 hour ago, 4nln415 said:

It's mostly from Enhance blood textures I think but my conflict list is a mess 

  Reveal hidden contents

image.png.716e55e0893c7dbd81794c5497541df5.png

 

 

Don't the blood splatters disappear after a while?

 

 

Posted (edited)
9 hours ago, GrimGrim31 said:

 

Don't the blood splatters disappear after a while?

 

 

I think Long Range bullet holes I'm using prolongs all decals. I probably shouldn't be using it when I'm barely combating but it's been in my hard include for ages. fDecalLifetime=36001 hour in game time? 

I'm just gonna change it to 60. 

Edited by 4nln415
Posted
16 hours ago, GrimGrim31 said:

Don't the blood splatters disappear after a while?

 

Blood spatter and gunshot residue from energy weapons seem to adhere to my character like a second skin. Strangely, there's also a shadowy residue left by the clothing I've worn. I don't know why.

I'll post a picture if I notice it again.

Posted (edited)
20 hours ago, GrimGrim31 said:

It makes more sense for people to role play the water requirement.  I can make purified water a requirement in the player inventory if it is not raining, but the other water sources are either not detectable (puddles) or would require such a heavy script load to detect (lake or stream) that the cost outweighs the immersion value.

 

That would be great.

That makes sense in a way. That radiation is only prevented if clean water is used for cleaning.

Edited by deathmorph
Posted
6 hours ago, deathmorph said:

 

That would be great.

That makes sense in a way. That radiation is only prevented if clean water is used for cleaning.

 

It makes sense.  Wash with purified water or take a shower in the rain to avoid radiation.  If you washed in a puddle, a stream, or a lake in FO4, you would get radiation.

 

I made the change already and tested it.  It will be an MCM option that you have to turn on to require purified water when washing with super soap, so anyone who likes the current method won't even notice a change.

 

I am having a look around for washing soap bottles so it might be a day or two before I post the updated version.

 

 

Posted
3 hours ago, GrimGrim31 said:

It makes sense.

 

That would be a truly immersive addition. It would mean you're not just using soap anymore, but also paying attention to whether it's raining or if you have clean or dirty water with you.

Checking if there's a lake or river nearby wasn't possible, if I understood you correctly. That's not a problem, though, since there's the swimming option from WOTC.

By the way, I think it's great that you included the option to wash companions. Thumbs up!

  • 2 weeks later...
Posted

Version 2.3 of MWoW is available for download.  This was a minor update so most of you will not need to download it.

 

Version 2.3 adds a new MCM option to make one unit of Purified Water, in the Player's inventory, a requirement to use Super Soap.  The water will be used up during the washing process.  NOTE:  Purified Water is not required to wash during rain showers.

 

 

I have been spending my available time working on my other mod so I forgot to make this update available last week.

 

Just a reminder that this mod doesn't care which version of FO4 you use.  It works with pre-NG, NG, and Anniversary Edition.

 

 

Posted

Hello, I downloaded both versions of MWOW 2.3 the one is 3.61 MB and the other is 2.8 MB I see that the version of FO4 is (thankfully) not relevant for your mod.  I figured that perhaps one was an ESP-FE version but they are both set as normal ESP, is the difference that one is loose and the other is BSA? I am relatively new to your mod and just want to be sure that I am updating the correct one for my current gameplay.  Thank you.

Posted (edited)

Hi @GrimGrim31,

first off, thanks for the new Super-Soap feature with the real Purified Water check – great immersion!

Unfortunately, it only recognizes the vanilla bottle. All refillable bottles from Give Me That Bottle (e.g. Purified Water (Beer), (Vodka Bottle), (Rum Bottle), (Whiskey Bottle) etc. in (2/2) or (1/2)) are not accepted.

2025-11-2611_22_00-Fallout4.png.7ad1ba69306833fa50ee2af1a2d92ab8.png

Are you aware and would a small patch be possible sometime? Would be awesome.

Thanks & keep it up!

Edited by deathmorph

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...