SLSF Fame Comments Reloaded

[Gristle]

6 hours ago, matekun said:

Is the old sexual fame framework still needed?

Yes, it is.

[Vetsu129]

Hey Gristle can I get a list or a hint on who to talk to to access to the stuff? 

[WizardLookingDude]

I don't know if this because I updated on an existing save (instead of starting over), but on the part of the cuckold quest where the PC is supposed to read the note from the whiterun steward, there doesn't appear to be any note. The innkeeper says one was left for him, but the note is not deposited in the PC's inventory.

[DayTri]

Can I ask, what is the "vibe" of the new cuck content? Does PC enjoy / hate it, does the spouse enjoy/hate it? Is it a scenario where the spouse is in some kind of trouble and can be rescued, or is it more like the spouse intentionally cheats on the PC? Etc

[Gristle]

11 hours ago, killer905 said:

More problems:

PC female and Spouse female (PC and spouse likes males)

1) Olfina does not stand with the rest of the NPCs but follows her AI pack

Strange, because Irileth works and this alias is being filled with whoever is in the Housecarl faction in Dragonsreach. Olfina must have her factions messed up. In any case, in the version just posted (3.72), I forced Olfina into the housecarl alias if Vignar is Jarl.

11 hours ago, killer905 said:

2) After the conversation with the steward, the task does not jump to Housecarl if Spouse has that she prefers female

3) After the spouse dialogue to enjoy the party, then nothing more happens (the quest does not go any further)

Fixed in v3.72 just posted.

11 hours ago, killer905 said:

Note:

Animations did not start as I have a chastity belt, but after turning off in DD,ZaZ and SexLab any restriction now is ok

I saw the ZaZ setting (turn off "Override if needed" under Animation under Sexlab tab of ZaZ MCM), but what DD and Sexlab settings are you referring to? 

 

(Also, it's pretty dumb that oral animations get blocked by a chastity belt without messing with these settings.)

[Gristle]

5 hours ago, Vetsu129 said:

Hey Gristle can I get a list or a hint on who to talk to to access to the stuff? 

I'm not sure what stuff you mean? If you mean the new cuckold quest, just set your relationship type to "PC is cuckold", buy a pair of wedding rings, and ask someone (with a Rel Rank 1+) to marry your PC. Then ask for sex to advance the quest.

[Gristle]

5 hours ago, WizardLookingDude said:

I don't know if this because I updated on an existing save (instead of starting over), but on the part of the cuckold quest where the PC is supposed to read the note from the whiterun steward, there doesn't appear to be any note. The innkeeper says one was left for him, but the note is not deposited in the PC's inventory.

Yes, that's the reason. The note is put in an "alias" and this alias is only filled on quest start, which in this case means the start of the cuckold quest, which starts when you first ask for sex in a "PC is cuckold" relationship. I could give you the setstage command to skip, but you will run into several more problems down the road caused by the same thing. So, the best solution is to change to a different relationship type, break up with your spouse, change back to "PC is cuckold", and then remarry your spouse.  This will reset the cuckold quest.

[Gristle]

4 hours ago, DayTri said:

Can I ask, what is the "vibe" of the new cuck content? Does PC enjoy / hate it, does the spouse enjoy/hate it? Is it a scenario where the spouse is in some kind of trouble and can be rescued, or is it more like the spouse intentionally cheats on the PC? Etc

The spouse intentionally cheats on the PC, so the spouse definitely enjoys having a variety of sex partners. There is also a "bull" component to the quest, but that is more random, while the main cuckold quest is more sequential (but also with random events). The PC is definitely upset and embarrassed by having the spouse's cheating become publicly known. As for whether the PC might come to enjoy watching, I tried to put in PC dialogue choices that allow for that. If more of that is desired, I can definitely add, but I'm trying to draw a line between this relationship and the "PC likes to share spouse" relationship. 

Edited April 14, 2025 by Gristle

[killer905]

16 minutes ago, Gristle said:

Strange, because Irileth works and this alias is being filled with whoever is in the Housecarl faction in Dragonsreach. Olfina must have her factions messed up. In any case, in the version just posted (3.72), I forced Olfina into the housecarl alias if Vignar is Jarl.

Is test build Olfina was in party so something get fuck up <shrugs>

 

17 minutes ago, Gristle said:

I saw the ZaZ setting (turn off "Override if needed" under Animation under Sexlab tab of ZaZ MCM), but what DD and Sexlab settings are you referring to? 

 

(Also, it's pretty dumb that oral animations get blocked by a chastity belt without messing with these settings.)

Oral works if i do in SexLab turn off "Filter ZaZ Devices Animations and in ZaZ "Override if need.

 

DD have 3 options but well not for chastility belt.

 

The fact it's silly that having a chastity belt doesn't trigger oral animations, but that's Skyrim/Mod and their strange behaviour.

Generally it looked like the message ‘Plating Animation’ Billy Lestial Oral’ would appear and suddenly change to Plaing Animation and interrupt the animation, but luckily it doesn't block the progression of the quest.

[kklae]

I think some of my other mods are messing up the MCM menu for this mod.
After updating from 3.64 to 3.65, the MCM menu contents for this mod are no longer displayed, only the list of options on the left side of the MCM is available.
Using a new save game still doesn't work.
Since I use so many mods, the troubleshooting seems to be endless. I can't experience the new content starting from 3.65 without the MCM.
Maybe someone can tell me the possible reasons why the MCM menu contents won't appear?
Or where can I modify the MCM menu settings for this mod? Maybe a console command?

[eflat01]

3 hours ago, kklae said:

I think some of my other mods are messing up the MCM menu for this mod.
After updating from 3.64 to 3.65, the MCM menu contents for this mod are no longer displayed, only the list of options on the left side of the MCM is available.
Using a new save game still doesn't work.
Since I use so many mods, the troubleshooting seems to be endless. I can't experience the new content starting from 3.65 without the MCM.
Maybe someone can tell me the possible reasons why the MCM menu contents won't appear?
Or where can I modify the MCM menu settings for this mod? Maybe a console command?

 

Make a save then try this in the console:

 

setstage ski_configmanagerinstance 1
 

That runs through the McM initial quest and should rebuild your menus. May take a couple minutes if you have a lot of menus.

Edited April 14, 2025 by eflat01

[The_Blank_Frank]

19 hours ago, Gristle said:

Yes, that's the reason. The note is put in an "alias" and this alias is only filled on quest start, which in this case means the start of the cuckold quest, which starts when you first ask for sex in a "PC is cuckold" relationship. I could give you the setstage command to skip, but you will run into several more problems down the road caused by the same thing. So, the best solution is to change to a different relationship type, break up with your spouse, change back to "PC is cuckold", and then remarry your spouse.  This will reset the cuckold quest.

Hello, I've encountered same issue, but it seems that I can't marry again without using cheats... each time Maramal confirms that marriage is completed, quest fails automatically.
Is it possible that alias has broken marriage somehow?

In any case, could you please share quest id just to have a quick check? Thanks again, your mod is great!

Edited April 14, 2025 by The_Blank_Frank

[kklae]

9 hours ago, eflat01 said:

 

Make a save then try this in the console:

 

setstage ski_configmanagerinstance 1
 

That runs through the McM initial quest and should rebuild your menus. May take a couple minutes if you have a lot of menus.

I tried this and it didn't work. But don't worry, I cleaned my saves with the save cleaner and everything seems to be back to normal.
As someone who doesn't know how to edit programs, these bugs that appear for no reason always make me feel magical, haha.

[Gristle]

10 hours ago, The_Blank_Frank said:

Hello, I've encountered same issue, but it seems that I can't marry again without using cheats... each time Maramal confirms that marriage is completed, quest fails automatically.
Is it possible that alias has broken marriage somehow?

In any case, could you please share quest id just to have a quick check? Thanks again, your mod is great!

Sorry, by "break up with your spouse" and "remarry your spouse" I meant using the dialogues built into this mod, not the vanilla marriage system. Assuming you have previously selected a "spouse" for this mod's purposes using this mod's dialogue system, just use the dialogue options in this mod to break up with your spouse, and then use the dialogue options in this mod to marry your spouse again. Maramal is not needed. Just two Bonds of Matrimony. (Note that PCs in "PC is cuckold" relationships don't have the "break up" option, so you'll need to switch relationships in the MCM first in order to break up.)

 

This mod doesn't interact with the vanilla marriage system at all.

[Alturistix]

On 4/13/2025 at 8:41 PM, Gristle said:

I'm not sure what stuff you mean? If you mean the new cuckold quest, just set your relationship type to "PC is cuckold", buy a pair of wedding rings, and ask someone (with a Rel Rank 1+) to marry your PC. Then ask for sex to advance the quest.

Heya for some reason I can only ask for sex once. After that first sex, the dialogue disappears. The quest stage also remains at 2.

[Vetsu129]

When doing the Bull Quest , It gets to the Check if spouse is Ok , nothing happens.

I don't get more dialogue they just do the act and then nothing . tried waiting , saving reloading nothing

[The_Blank_Frank]

5 hours ago, Gristle said:

Sorry, by "break up with your spouse" and "remarry your spouse" I meant using the dialogues built into this mod, not the vanilla marriage system. Assuming you have previously selected a "spouse" for this mod's purposes using this mod's dialogue system, just use the dialogue options in this mod to break up with your spouse, and then use the dialogue options in this mod to marry your spouse again. Maramal is not needed. Just two Bonds of Matrimony. (Note that PCs in "PC is cuckold" relationships don't have the "break up" option, so you'll need to switch relationships in the MCM first in order to break up.)

 

This mod doesn't interact with the vanilla marriage system at all.

Thanks for your reply!

Just to make sure that everything's working fine, could you please specify the dialogue line to reset marriage in relation to this mod? I'm asking since I have some other mods which work on marriage system and I wanted to be sure to choose the correct line.

Thanks again!

[Gristle]

9 hours ago, Alturistix said:

Heya for some reason I can only ask for sex once. After that first sex, the dialogue disappears. The quest stage also remains at 2.

The quest should advance to 5 after that first sex. That PC sex is detected using a built-in Sexlab function that tracks all PC sex activity. Are you using P+ by any chance?

[Gristle]

9 hours ago, Vetsu129 said:

When doing the Bull Quest , It gets to the Check if spouse is Ok , nothing happens.

I don't get more dialogue they just do the act and then nothing . tried waiting , saving reloading nothing

The are two "Make sure your spouse is okay" objectives. One for the first time your spouse has sex with the bull, and one for the second time. I'll assume you are talking about the first. Your spouse should force greet you after the act ("By the Gods! That was amazing.") and then start a short scene with the bull.  This is hard to figure out because this is using the same sex end detect code, same package and same dialogue branch as most of the previous post-sex spouse force greets.

 

The only thing I can think of is that the spouse's post-sex force greet package has the spouse move to within 200 units of the PC before the dialogue is started. It could be the spouse is being blocked by the bull or other NPCs. If the spouse can't get to you, the scene will never advance. The spouse will want to leave the bed from one side, and if there's an NPC on that side of the bed, the spouse won't move. I suggested replaying the scene if you can. Or, you can try walking right up to the spouse to trigger the force greet. If need be, I can increase the force greet distance. I originally had it further, but when the spouse is talking from across the room, sometimes it's hard to tell who he or she is talking to.

 

Finally, do you know what stage the quest is on when it gets stuck? You can type player.sqs SLSF_Comments_CuckoldPC to find out.

 

 

[Gristle]

6 hours ago, The_Blank_Frank said:

Thanks for your reply!

Just to make sure that everything's working fine, could you please specify the dialogue line to reset marriage in relation to this mod? I'm asking since I have some other mods which work on marriage system and I wanted to be sure to choose the correct line.

Thanks again!

Yes. "It's time to end our marriage." but this won't appear for relationship type "PC is cuckold". So you'll have to change that first (to anything else) in the MCM.

[nuclearstorm]

First of all, thanks for the awesome update.

I've noticed one odd behaviour though, the mod is now forcing outfit switching in this new quest and sometimes a nude state.

That causes conflicts with other mods that are already handling NPC outfits or all the adjusted sexlab stripping conditions which also removes wigs and other decorations that should stay on at all times.

A MCM toggle for disabling outfit handling would be good.

[Alturistix]

6 hours ago, Gristle said:

The quest should advance to 5 after that first sex. That PC sex is detected using a built-in Sexlab function that tracks all PC sex activity. Are you using P+ by any chance?

Yep, im using P+

[Vetsu129]

14 hours ago, Gristle said:

The are two "Make sure your spouse is okay" objectives. One for the first time your spouse has sex with the bull, and one for the second time. I'll assume you are talking about the first. Your spouse should force greet you after the act ("By the Gods! That was amazing.") and then start a short scene with the bull.  This is hard to figure out because this is using the same sex end detect code, same package and same dialogue branch as most of the previous post-sex spouse force greets.

 

The only thing I can think of is that the spouse's post-sex force greet package has the spouse move to within 200 units of the PC before the dialogue is started. It could be the spouse is being blocked by the bull or other NPCs. If the spouse can't get to you, the scene will never advance. The spouse will want to leave the bed from one side, and if there's an NPC on that side of the bed, the spouse won't move. I suggested replaying the scene if you can. Or, you can try walking right up to the spouse to trigger the force greet. If need be, I can increase the force greet distance. I originally had it further, but when the spouse is talking from across the room, sometimes it's hard to tell who he or she is talking to.

 

Finally, do you know what stage the quest is on when it gets stuck? You can type player.sqs SLSF_Comments_CuckoldPC to find out.

 

 

It Stops at Stage 20 , With Nazeem if that helps. I tired setting stage past 20 but nothing and then it moves on the the next Part , Anal which doesn't do anything which adds a 2nd Check if spouse is ok . Wife walks around the house and Nazeem follows Her and they both give Standard Dialogue.

[The_Blank_Frank]

On 4/15/2025 at 8:36 PM, Gristle said:

The are two "Make sure your spouse is okay" objectives. One for the first time your spouse has sex with the bull, and one for the second time. I'll assume you are talking about the first. Your spouse should force greet you after the act ("By the Gods! That was amazing.") and then start a short scene with the bull.  This is hard to figure out because this is using the same sex end detect code, same package and same dialogue branch as most of the previous post-sex spouse force greets.

 

The only thing I can think of is that the spouse's post-sex force greet package has the spouse move to within 200 units of the PC before the dialogue is started. It could be the spouse is being blocked by the bull or other NPCs. If the spouse can't get to you, the scene will never advance. The spouse will want to leave the bed from one side, and if there's an NPC on that side of the bed, the spouse won't move. I suggested replaying the scene if you can. Or, you can try walking right up to the spouse to trigger the force greet. If need be, I can increase the force greet distance. I originally had it further, but when the spouse is talking from across the room, sometimes it's hard to tell who he or she is talking to.

 

Finally, do you know what stage the quest is on when it gets stuck? You can type player.sqs SLSF_Comments_CuckoldPC to find out.

 

 

On 4/16/2025 at 11:18 AM, Vetsu129 said:

It Stops at Stage 20 , With Nazeem if that helps. I tired setting stage past 20 but nothing and then it moves on the the next Part , Anal which doesn't do anything which adds a 2nd Check if spouse is ok . Wife walks around the house and Nazeem follows Her and they both give Standard Dialogue.

Same issue, sadly... is it possible to force spouse's conversation except proceeding with stages? I tried doing that with Jarl's quest, but I think that spouse's dialogue is required to receive your inventory back, so I'd avoid doing that.

Thanks again for your awesome mod, Gristle! Even if I'm having small issues, it's exactly what I was searching storywise!

Edited April 17, 2025 by The_Blank_Frank

[WizardLookingDude]

On 4/13/2025 at 7:45 PM, Gristle said:

Yes, that's the reason. The note is put in an "alias" and this alias is only filled on quest start, which in this case means the start of the cuckold quest, which starts when you first ask for sex in a "PC is cuckold" relationship. I could give you the setstage command to skip, but you will run into several more problems down the road caused by the same thing. So, the best solution is to change to a different relationship type, break up with your spouse, change back to "PC is cuckold", and then remarry your spouse.  This will reset the cuckold quest.

It worked like a charm. Thanks.