Etarnalazure Posted March 16, 2021 Posted March 16, 2021 Turns out.. It might be the outfit.. I changed outfit and suddenly there were no more jelly shoulders
CPVC Posted March 16, 2021 Author Posted March 16, 2021 23 minutes ago, Etarnalazure said: Hmm, I've done a cursory look in the thread and I cant see anyone else writing about this. Just started a new game, and I was confused as it looked like my male character had a stretched neck. I tried going into CAS to change it, however he looked normal there, when I returned to the world however, it turns out his shoulders (Or rather the midpoint between neck and shoulders), has turned into jelly the middle of his shoulders literally bounce up and down before they settle again, as if the mod has confused the mid point of the shoulders for breasts on a female character. Log.txt 4.05 kB · 0 downloads  13 minutes ago, Etarnalazure said: Heres a screenshot of the "jelly" shoulders. Its not very pronounced, just know that I didnt make the dude into a girraffe in the CAS   Oh yeah, I know exactly what you're talking about. I've noticed this problem as well. I'm not sure why this problem occurs, but I am aware of it. It's probably another vertex selection issue. I'll look into it.
CPVC Posted March 16, 2021 Author Posted March 16, 2021 7 minutes ago, Etarnalazure said: Turns out.. It might be the outfit.. I changed outfit and suddenly there were no more jelly shoulders  It is the outfit. That one specifically. I've seen it many times. I'll examine the mesh and figure out what is going on.
rawdogg Posted March 16, 2021 Posted March 16, 2021 i use a windows software and i also use origin to play the sims4 . its a 64bit but i cant seem to get it to work.  could you give specific installation details for my situation? Â
alexlll Posted March 16, 2021 Posted March 16, 2021 Everything works fine. Thanks for your work, I found the reason for which I was having problems. Â Spoiler Â
0xAF Posted March 18, 2021 Posted March 18, 2021 On 3/13/2021 at 9:33 PM, 0xAF said: WW have sweating system, so when sim get sweat layer (there are many of them) it cause re-render, which cause this simulation reset the problem still persists on v0.3-p6.1 2021-03-15 this is especially noticeable when sim do exercising  also it's seems like when PC go powersave mode (turn off display) for long time — the game just close (happens 2 times) nope: it's LOCK screen (just press Win+L) Win10
2cool4u_1 Posted March 18, 2021 Posted March 18, 2021 2 hours ago, 0xAF said: this is especially noticeable when sim do exercising The WW sweat is problematic. It also removes all the specular layers (shininess) from any clothing. Latex or leather, for example, will just look like normal material. I now play with sweat disabled all the time.
CPVC Posted March 18, 2021 Author Posted March 18, 2021 10 hours ago, 0xAF said: the problem still persists on v0.3-p6.1 2021-03-15 this is especially noticeable when sim do exercising  also it's seems like when PC go powersave mode (turn off display) for long time — the game just close (happens 2 times) nope: it's LOCK screen (just press Win+L) Win10  8 hours ago, 2cool4u_1 said: The WW sweat is problematic. It also removes all the specular layers (shininess) from any clothing. Latex or leather, for example, will just look like normal material. I now play with sweat disabled all the time.  Thanks for the heads up, guys. I'll look into that this evening.
CPVC Posted March 19, 2021 Author Posted March 19, 2021 12 hours ago, 0xAF said: the problem still persists on v0.3-p6.1 2021-03-15 this is especially noticeable when sim do exercising  also it's seems like when PC go powersave mode (turn off display) for long time — the game just close (happens 2 times) nope: it's LOCK screen (just press Win+L) Win10  10 hours ago, 2cool4u_1 said: The WW sweat is problematic. It also removes all the specular layers (shininess) from any clothing. Latex or leather, for example, will just look like normal material. I now play with sweat disabled all the time.  Could one of you guys post a screen shot of what this looks like? I'm not sure it's happening in my game. You can apply sweat to a sim using the Wicked Whims command "ww.apply_sweat [FIRST_NAME] [LAST_NAME]".  This is what a sweaty sim looks like in my game, with RTBP installed. It looks exactly the same with RTBP uninstalled.   Â
2cool4u_1 Posted March 19, 2021 Posted March 19, 2021 @CPVC Sorry. I was mentioning an issue with WW sweat, but it has nothing to do with RTBP. To make the sweat show, WW strips off all the specular layers, then adds new ones for the sweat (to give it that wet look).
0xAF Posted March 19, 2021 Posted March 19, 2021 5 hours ago, CPVC said: Could one of you guys post a screen shot of what this looks like? the problem is not what it is look like but: Â On 3/13/2021 at 9:33 PM, 0xAF said: it cause re-render, which cause this simulation reset boobs just jump like crazy and go normal again make sim do exercising for long time also what about windows lock screen? did you recreate game crash?
CPVC Posted March 21, 2021 Author Posted March 21, 2021 On 3/18/2021 at 7:14 PM, 2cool4u_1 said: @CPVC Sorry. I was mentioning an issue with WW sweat, but it has nothing to do with RTBP. To make the sweat show, WW strips off all the specular layers, then adds new ones for the sweat (to give it that wet look). Â Oh, ok, I get it. Thanks for the clarification. Â On 3/19/2021 at 12:26 AM, 0xAF said: the problem is not what it is look like but: Â boobs just jump like crazy and go normal again make sim do exercising for long time also what about windows lock screen? did you recreate game crash? Â I thought I fixed the game crashing when the computer is locked issue with the latest preview release... Is anyone else still experiencing this problem? Â And yes, sometimes the simulations appear to reset randomly. I think this is due to the Sims 4 loading new sim buffers to replace the active one. It seems the game tries to optimize its sim buffers by excluding the blending information for bones that it doesn't need at that time. When an animation that requires a bone that isn't part of the sim buffer at that time is activated, it creates a new sim buffer with the new bone information included and replaces the old one. Â That's my theory at least. More testing is needed. I might be able to figure out a way to detect when this occurs and transfer the active simulators over to the new sim buffer. 1
alexlll Posted March 22, 2021 Posted March 22, 2021 Hi CPVC! Could you make the chest move more when Sim is standing upside down or lying on its side? This is happening now, but I would like it to be more noticeable.
CPVC Posted March 22, 2021 Author Posted March 22, 2021 12 hours ago, alexlll said: Hi CPVC! Could you make the chest move more when Sim is standing upside down or lying on its side? This is happening now, but I would like it to be more noticeable. Â Sure, I'll see what I can do. I'm not super crazy about the current breast simulation positions. The breasts are simulated relative to their parent bone, "b__spine1__" and the simulation positions are around where the center of mass would be. I think I might move the simulation positions out a bit to give a little more bounce. I'll do some experimenting and see if I can find something that works, but isn't out of control, like before. 3
EL Dragex Posted March 25, 2021 Posted March 25, 2021 Is there a way to stop the breast and butt from sagging? Causes glitches and I have had to remove it as it doesnt look all that good. If you pause and unpause the game you can see what I am on about with the kind of sagging effect
trunnk Posted March 25, 2021 Posted March 25, 2021 57 minutes ago, EL Dragex said: Is there a way to stop the breast and butt from sagging? Causes glitches and I have had to remove it as it doesnt look all that good. If you pause and unpause the game you can see what I am on about with the kind of sagging effect dude, you can change these settings yourself with the RTBP cheats, which are well-documented in the download. or use the documentation to edit the settings.ini file yourself! reduce gravity or some other setting. read the instructions. 2
EL Dragex Posted March 25, 2021 Posted March 25, 2021 14 hours ago, trunnk said: dude, you can change these settings yourself with the RTBP cheats, which are well-documented in the download. or use the documentation to edit the settings.ini file yourself! reduce gravity or some other setting. read the instructions. Well its obvious to anyone to read the instructions for things like this. I did and changed the gravity but it still has that weird effect where if you pause and unpause you can see them sag
EL Dragex Posted March 25, 2021 Posted March 25, 2021 14 hours ago, trunnk said: dude, you can change these settings yourself with the RTBP cheats, which are well-documented in the download. or use the documentation to edit the settings.ini file yourself! reduce gravity or some other setting. read the instructions. By the way the commands dont even work for me. Something to do with command server or something.
trunnk Posted March 26, 2021 Posted March 26, 2021 11 hours ago, EL Dragex said: By the way the commands dont even work for me. Something to do with command server or something. screenshot on your sag issue, please. If the commands don't work, edit the settings.ini in notepad. these are my settings: Settings.ini
0xAF Posted March 26, 2021 Posted March 26, 2021 13 hours ago, EL Dragex said: the gravity but it still has that weird effect where if you pause and unpause I like it you can see the gravity force and simulation is worked or not
trunnk Posted March 26, 2021 Posted March 26, 2021 6 hours ago, 0xAF said: I like it you can see the gravity force and simulation is worked or not You can also compensate for the default gravity effect when building your SIM inside CAS. I do. Just set breasts a little higher to offset for the gravity effect outside of CAS.
CPVC Posted March 27, 2021 Author Posted March 27, 2021 On 3/25/2021 at 10:07 AM, EL Dragex said: By the way the commands dont even work for me. Something to do with command server or something.  Whoops! Forgot to update a file with the latest preview release. This issue should be fixed now. The commands were working, but due to a typo, the response from the command server wasn't being displayed. This was because I wrote "_commandSever" at one point, rather than "_commandServer" in one of the script mod files.  For those of you who use the "rtbp.command" command, please re-download and re-install. Otherwise, you don't need to do anything.  Sorry about that. I need to write a script that automatically creates RTBP release ZIP files.  I'm working on creating an application that can tweak RTBP's settings on the fly. Soon you'll be able to Alt+Tab out of the Sims, change the physics variables via a user-friendly GUI, then resume your game.  As for the sagging issue, you could try setting the gravity to 0. Also, negative values are valid as well. You could try setting the gravity to a negative value to counteract the mass. 3
alexlll Posted March 27, 2021 Posted March 27, 2021 6 hours ago, CPVC said: Soon you'll be able to Alt+Tab out of the Sims, change the physics variables via a user-friendly GUI, then resume your game. Very good! I am using windowed full screen mode and a second monitor, it will be possible to change settings on the fly without leaving the game.
ShaggyDhs Posted March 27, 2021 Posted March 27, 2021 4 hours ago, JCLY said: Thank you for this incredible mod. Howev er, my male's finger is dropping as shown in the screenshot even I've disable butt physics. Can anyone advice for this bug? Cheers A similar thing is happening to the guys balls on mine. Not all the time and not usually when they are naked but naked and having sex. But sometimes if you changed the angle of the camera, it will fix a little. I was thinking maybe it was because I had Bouncing Boobs, who now has ball movement and this one and they were clashing with each other.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now