Gh0sTG0 Posted September 14, 2020 Share Posted September 14, 2020 9 minutes ago, Samdaman95 said: Am I supposed to start SSEEdit with MO2? Â JUST! GO! THAT! LINK! AND! READ! IT! ALL!!! 0,1. 3, 4, 6, 7, 8, 9. This are that things you should know BEFORE you start modding anything. PS just to add: You should use things in this order:Â LOOT->BodySlide(if use)->FNIS(if use)->install skyfem, use skyfem. PPS If you use MO2 - you start EVERYTHING through mo2. SKSE Through mo2. SSEEdit through mo2... Link to comment
Grey Cloud Posted September 14, 2020 Share Posted September 14, 2020 4 minutes ago, Samdaman95 said: Am I supposed to start SSEEdit with MO2? If you had done any reading then you would know the answer to this and most of the other questions you keep asking. Link to comment
Samdaman95 Posted September 14, 2020 Share Posted September 14, 2020 5 minutes ago, Gh0sTG0 said: Â JUST! GO! THAT! LINK! AND! READ! IT! ALL!!! 0,1. 3, 4, 6, 7, 8, 9. Alright alright Link to comment
Gh0sTG0 Posted September 14, 2020 Share Posted September 14, 2020 PS Except skyfem+high poly head... Hope sometimes someone will tell me WHY skyrim starts searching for high poly head's .tri files in default data folder (not mo2 virtual) after skyfem patch... Link to comment
Samdaman95 Posted September 14, 2020 Share Posted September 14, 2020 You know what, fuck this mod... Link to comment
Grey Cloud Posted September 14, 2020 Share Posted September 14, 2020 21 minutes ago, Samdaman95 said: You know what, fuck this mod... Link to comment
Varithina Posted September 15, 2020 Share Posted September 15, 2020 For those having problems, mo2 changed the way some things work a few versions ago, now if the files already exist it should/will overwrite them with the new ones, only new files end up in the overwrite, which can be a total pain if trying to bug stomp problems. Best way around this, though it is a pain, is to set all the tools up to output to a separate working directory, then move them to where you want them to be in the install, either as a new mod or whatever. Link to comment
Seripas Posted September 16, 2020 Share Posted September 16, 2020 I'm using a CBBE Body and futanari addon but all of the dicks on the females created by this mod aren't attached to the body. any suggestions on how to fix this? Link to comment
devildx Posted September 16, 2020 Share Posted September 16, 2020 1 minute ago, Seripas said: I'm using a CBBE Body and futanari addon but all of the dicks on the females created by this mod aren't attached to the body. any suggestions on how to fix this? You need the ERF High Poly Addon (or Belisario UNP) installed before and in the Skyfem fomod select the option to replace the male addons with the high poly (or UNP). Link to comment
Gh0sTG0 Posted September 17, 2020 Share Posted September 17, 2020 OK... I just finished modding my skyrim full build... And SkyFem breaks things again... And that method that I find for minimum package stops working... Verdict: Skyfem is not compatible with high poly head for me... Spoiler  Link to comment
Gh0sTG0 Posted September 18, 2020 Share Posted September 18, 2020 Hmmm... Looks like I find what's incorrect... mb... Is there any way to make script let player be MALE on new game start? I mean, that thing in racemenu that pc's sex is female on start... PS Not now, but I'll try to start game with disabled skyfem, start everything, then activate skyfem, hm... PPS Start without skyfem, set pc, save, add skyfem, load works for me with highpolyhead! Link to comment
w0883g0ngz Posted September 22, 2020 Share Posted September 22, 2020 So I've successfully installed the mod, awesome work by the way, and I'm now sorting out the SoS incompatibilities on the feminized "males". I've installed SoS (haven't installed all three SoS options yet, I'll get on to that), but I haven't installed any "SoS for females" and other such mods yet. I've noticed that those who were in my position needed to install all three SoS options and install a Patch of some kind - that's supposed to be within downloads, but I can't seem to find it. Is it now part of the mod itself, and I just need to fully install SoS? I've also found a patch for this by chuckseven1, is that supposed to be it? Just wanted to check before I went and did anything rash. Link to comment
w0883g0ngz Posted September 22, 2020 Share Posted September 22, 2020 4 hours ago, w0883g0ngz said: So I've successfully installed the mod, awesome work by the way, and I'm now sorting out the SoS incompatibilities on the feminized "males". I've installed SoS (haven't installed all three SoS options yet, I'll get on to that), but I haven't installed any "SoS for females" and other such mods yet. I've noticed that those who were in my position needed to install all three SoS options and install a Patch of some kind - that's supposed to be within downloads, but I can't seem to find it. Is it now part of the mod itself, and I just need to fully install SoS? I've also found a patch for this by chuckseven1, is that supposed to be it? Just wanted to check before I went and did anything rash. Also, I'm encountering an issue with the TESedit patcher where the mod cannot be mapped to [FileID] for file 'Skyfem.esp' Initially, the file reused to be mapped to my Revenge of the Enemies mod. Fair enough, makes sense that may have some conflicts. So I uninstall the mod, try and run the patch again. Now it's getting caught on Immersive weapons, that can't be right. Did I do something wrong here? The test-run I did of Skyfem seemed fine, I can't imagine that it'd be this contentious - the main file states as much. Has anyone else ran into such problems and if so, could I please learn from your advice? Link to comment
Grey Cloud Posted September 22, 2020 Share Posted September 22, 2020 7 hours ago, w0883g0ngz said: I've noticed that those who were in my position needed to install all three SoS options and install a Patch of some kind Do you mean the one that is in the Skyfem archive, in the UNP Patch folder? There is another patch in the HPF Patch folder - not sure what that one is. 1 Link to comment
w0883g0ngz Posted September 22, 2020 Share Posted September 22, 2020 2 hours ago, Grey Cloud said: Do you mean the one that is in the Skyfem archive, in the UNP Patch folder? There is another patch in the HPF Patch folder - not sure what that one is. That's the one, yeah. It's just that it's for UNP and I use CBBE and came in the file intended for SSE, I use LEÂ - Should be fine? Just install into the main folder? Link to comment
Grey Cloud Posted September 22, 2020 Share Posted September 22, 2020 3 minutes ago, w0883g0ngz said: That's the one, yeah. It's just that it's for UNP and I use CBBE and came in the file intended for SSE, I use LEÂ - Should be fine? Just install into the main folder? I use UUNP and LE. It definitely works with that combo but I don't know about the CBBE. IIRC it is for the problem of the gap between the schlong and the body. I'm not sure if its necessary other than for that. 1 Link to comment
w0883g0ngz Posted September 23, 2020 Share Posted September 23, 2020 9 hours ago, Grey Cloud said: I use UUNP and LE. It definitely works with that combo but I don't know about the CBBE. IIRC it is for the problem of the gap between the schlong and the body. I'm not sure if its necessary other than for that. Fair enough, good to know. Link to comment
w0883g0ngz Posted September 23, 2020 Share Posted September 23, 2020 On 9/22/2020 at 9:23 AM, w0883g0ngz said: Also, I'm encountering an issue with the TESedit patcher where the mod cannot be mapped to [FileID] for file 'Skyfem.esp' Initially, the file reused to be mapped to my Revenge of the Enemies mod. Fair enough, makes sense that may have some conflicts. So I uninstall the mod, try and run the patch again. Now it's getting caught on Immersive weapons, that can't be right. Did I do something wrong here? The test-run I did of Skyfem seemed fine, I can't imagine that it'd be this contentious - the main file states as much. Has anyone else ran into such problems and if so, could I please learn from your advice? Alright, installed the SoS patch for the other issue. I'd hoped that doing so might have resolved something, but the Skyfem patcher is still getting caught on Immersive Weapons. I've done a brisk check through the 20 pages of this thread, no results for either immersive weapons or revenge of the enemies, so I've clearly done something stupid. But besides getting Skyfem to load last in the load order, I had no issues with the mod the initial time I ran it.   Alright, went over the thread with a bit more resolve and came across someone who ran into the same issue. Just had to rebuild masters again, problem solved. Link to comment
everydayUser Posted October 4, 2020 Share Posted October 4, 2020 I realise this is an old thread, but I am having issues getting SSE edit to apply the patcher to SkyFem NPC. It keeps coming up with an error message saying that it can't find the path for the edit scripts folder. I have tried having SSE edit installed in many different locations, having it start in different folders. I've tried putting the Edit Scrips folder in multiple locations, and tried adding the Edit Scripts file to the SkyFem mod itself (as mentioned in a post on page 6) and no matter the location of SSE edit or the Edit Scripts folder, it can't find the path. Any help on this matter would be greatly appreciated. Link to comment
Varithina Posted October 4, 2020 Share Posted October 4, 2020 9 hours ago, twonk1999 said: I realise this is an old thread, but I am having issues getting SSE edit to apply the patcher to SkyFem NPC. It keeps coming up with an error message saying that it can't find the path for the edit scripts folder. I have tried having SSE edit installed in many different locations, having it start in different folders. I've tried putting the Edit Scrips folder in multiple locations, and tried adding the Edit Scripts file to the SkyFem mod itself (as mentioned in a post on page 6) and no matter the location of SSE edit or the Edit Scripts folder, it can't find the path. Any help on this matter would be greatly appreciated. The skyfem script goes into the sse edit scripts folder, not as a new folder but just as the files themselves. Link to comment
everydayUser Posted October 4, 2020 Share Posted October 4, 2020 36 minutes ago, Varithina said: The skyfem script goes into the sse edit scripts folder, not as a new folder but just as the files themselves. I am aware of this, SSE edit detects all plugins fine, it can find the patcher in the drop down menu fine. But when I go to actually run the script it says it can't find the path of the scripts, I am running it through mod organiser 2 if that makes a difference. Link to comment
Varithina Posted October 4, 2020 Share Posted October 4, 2020 5 hours ago, twonk1999 said: I am aware of this, SSE edit detects all plugins fine, it can find the patcher in the drop down menu fine. But when I go to actually run the script it says it can't find the path of the scripts, I am running it through mod organiser 2 if that makes a difference. Hmm, no idea in that case, it sounds as though xedit is not running right, but if it finds the scripts and all the esps, then it is ok, hmm only thing I can really thing of is permissions on the folder where the game/mo2 are installed, other than that I am out of ideas. Link to comment
WeeBabySeamus Posted October 26, 2020 Share Posted October 26, 2020 Sorry if this has been answered somewhere else, but is there a way to use the MNC patch to add herm creature models to the game without a full install of SkyFem? Link to comment
itsreallyannoyingtosignup Posted November 12, 2020 Share Posted November 12, 2020 This is a great mod, and although I've sometimes had issues, just regenerating usually fixes them. Thanks so much for making this available for SSE. On 9/14/2020 at 11:06 PM, Gh0sTG0 said: PS Except skyfem+high poly head... Hope sometimes someone will tell me WHY skyrim starts searching for high poly head's .tri files in default data folder (not mo2 virtual) after skyfem patch... Thanks for this. I was wondering why it would CTD literally every time I tried to switch the Face Part slider...! I don't have an answer, sadly, but I do have a work-around if anyone else is coming across this problem: 1. Do everything you need to do before SkyFem (bodyslide, LOOT, etc.) 2. Do SkyFem (add masters/apply script in SSEdit) 3. Start a new save/backup your existing one. 4. Disable SkyFem, but do not uninstall/regen, there's no need. 5. In Racemenu, switch to the appropriate face part for High Poly Head. Save/export. 6. Save and exit. 7. Re-enable SkyFem. All done. Hopefully this helps a little if anyone having the same issue. I don't know why it works, to be honest, and I have no idea why Skyrim doesn't clock it. Perhaps there's an easier way to solve this by duplicating HPH files and moving them around? I am still very new to modding, I'm sorry I can't offer more in the way of an answer. Â 2 Link to comment
Grey Cloud Posted November 12, 2020 Share Posted November 12, 2020 I don't know if it will help you guys with this particular problem but over on the Victor Plexus site there are instructions on how to make the HP head your default head. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now