Search the Community

TRX-ERF Hybrid Schlong for CBBE SE View File An edit of TRX_Trixter's TRX Futanari Addon that attempts to combine the best aspects of TRX_Trixter's TRX Futanari Addon and EvilReflex's Futanari CBBE SSE as well as Azazellz' LE UUNP conversion of Evil Reflex's Horse Penis Redux, namely the shaft, glans and foreskin shape and customisation from the former with the scrotum shape and sliders from the latter. Originally made exclusively to fit Vaginaless 3BA, this version was made to fit regular CBBE. Use the new StopGap slider to close the gap between the schlong and the body when using 3BA. A "full" 3BA conversion will follow later, but 3BA's vagina shape will require a bit of a think. Full 3BA version out now and split off into its own file. This CBBE SE version will need an update which will be done later. Commissioned by Honch. Note: All screenshots were taken with the Vaginaless 3BA version. Comparison of TRX-ERF Hybrid and default TRX Demonstration of new scrotum sliders trxerfhybridsliderdemonstration.mp4 A major impetus behind making this variant of TRX was frustration with trying to make scrotum physics look good with the default mesh. Comparing the structure of TRX's scrotum to ERF's, I concluded that the simpler geometry of the latter deformed less chaotically and the droopier shape made it better for dangly SMP physics, so I decided to combine the two. Here are some videos demonstrating the scrotum physics on this schlong: funwithsmp.mp4 crouch.mp4 rightinyourface.mp4 030303.mp4 NOTE: Requires the original TRX Addon. Every variant is SMP-enabled dy befault. To disable SMP, do not install the physics config file and use the "SMP Collisions Object Off" zap slider in BodySlide. TRXERFHybrid_seamless_CBBE_3BA.blend Use this file to generate textures for this schlong. dw's Schlong Physics Selector FOMOD A FOMOD by tznvlw that allows you to select from 4 different SMP configuration files that enable physics and collisions on the scrotum, and optionally the shaft. There now are semi-accurate collisions with your characters thighs. They are not perfect, however, and there are several "blind spots" where the balls will simply fall through your character like nothing was there. Acknowledgements TRX_Trixter for TRX Futanari Addon, EvilReflex for Futanari CBBE SSE, Azazellz for Horse Penis Redux LE, pema123 for SMP config Submitter donnerwetter Submitted 07/23/2023 Category Adult Mods Requires TRX Futa Addon Regular Edition Compatible Not Applicable  

Here is the updated SOS to run with AE, binaries was built for 1.5.97, 1.6.353, 1.6.629, 1.6.640 and 1.6.659-gog. The main benefit is the fix for CTD when load order changes, a bug present since original SOS for SE. I'm including the files for users to download and overwrite the original SOS dll, just download the right file for your version and install using mod manager. There are no changes in code except related to SKSE plugin data, and some "includes" fixed. No antivirus false positives (except for one, that is the same for the original SOS SE), tested on virustotal.com. The structure of the project changed, it's a bit easier to build without copy parts of skse, or without change the source code to build for a different version of skse. Users with the version from chuckseven1 will have to do a clean save, this version uses the original SOS SE 1.1.4 source code. I don't have time to maintain, so a developer with skills to build a c++ program is needed here. All the credits goes to the original SOS developers. REQUIRES THE ORIGINAL MOD: If you have problems, follow the steps in MCM to safely remove SoS from your game, then use the clean-save procedure from this link: Guide:Troubleshooting - Step Mods | Change The Game (stepmodifications.org). When you are sure SoS was completely removed from your save, you can try reenable the mod. Always install the original SOS linked above, then overwrite the old DLL with this mod. Below the instructions FOR DEVELOPERS to build the dll: SchlongsOfSkyrim_1_1_5-DLL-1_6_353.7z SchlongsOfSkyrim_1_1_5-DLL-1_6_629.7z SchlongsOfSkyrim_1_1_5-DLL-1_6_640.7z SchlongsOfSkyrim_1_1_5-DLL-1_6_659gog.7z SchlongsOfSkyrim-1.1.5-AE-dllsource.zip All the credits goes to the original authors. SchlongsOfSkyrim_1_1_5-DLL-1.5.97.zip SchlongsOfSkyrim_1_1_5-DLL-1_6_1130.zip SchlongsOfSkyrim_1_1_5-DLL-1_6_1170.zip SchlongsOfSkyrim_1_1_5-DLL-1_6_1179-20240326.zip

SOS Futanari CBBE Addon Patch for "The Pure" Body Texture View File DESCRIPTION This downloadable is a compatibility patch for SOS- Addon - Futanari CBBE SSE 1.1b for people using The Pure CBBE and UNP - 4K or 8K Female Skin Textures. INSTALLATION The patch utilizes FOMOD, so simply install it with a mod manager of your choice. It will prompt you to select the diffuse map option for The Pure (Default or Darker) so it can match the skin tone correctly. STEPS Install SOS- Addon - Futanari CBBE SSE first. Install this patch afterwards. This patch should always be loaded after SOS- Addon - Futanari CBBE SSE so it can replace the original files. ACKNOWLEDGEMENT This content would have never been possible if it wasn't for EvilReFlex's (futa mod author) help video on texturing SOS. This is also my first —hopefully useful— contribution on LL since I started lurking around and about in 2015. Bless the LL community for all it gives. Submitter Sezvek Submitted 05/09/2021 Category Adult Mods Requires SOS Futanari CBBE SE Regular Edition Compatible Not Applicable  

ERF Futanari CBBE SSE Uncut for 3BA Vaginaless v2 View File An edit of TRX_Trixter's Uncut version of EvilReflex's Futanari CBBE SSE specifically made to fit Vaginaless 3BA v2. It is essentially a Vaginaless 3BA v2 version of my previous mod. NOTE: Requires original. Every variant is SMP-enabled dy befault. To disable SMP, do not install the physics config file and use the "SMP Collisions Object Off" zap slider in BodySlide. There are several files available. Here is a rundown of each: ERF Futanari CBBE SSE Uncut for 3BA Vaginaless v2.1 Default Just the basic schlong addon edited to fit Vaginaless 3BA. Comes with SMP support, but otherwise nothing fancy. ERF Futanari CBBE SSE Uncut for 3BA Vaginaless v2.1 The glans has been separated into its own mesh with tweaked specular values, giving it a glistening wet look. SMP-enabled. ERF Futanari CBBE SSE Uncut for 3BA Vaginaless v2.1 DW Pubes A version with the aforementioned wet glans edit and my 17(+17) pube styles and ball hair, selectable as BodySlide zaps. Separated into three different projects due to size. See screenshots section for previews of each style. SMP-enabled. ERF Futanari CBBE SSE Uncut for 3BA Vaginaless v2.1 TRX Pubes A version with the wet glans and the four TRX Futanari Addon pubic hair by TRX_Trixter, selectable as BodySlide zaps. Note: The meshes for these styles do not show up in BodySlide. SMP-enabled. Note: Unfortunately, all of the above are simple BodySlide projects that output meshes that replace the schlong in the original Futanari CBBE SSE Addon. If you wish to turn these into separate addons, I recommend you see this tutorial for instructions: dw's Schlong Physics Selector FOMOD A FOMOD by tznvlw that allows you to select from 4 different SMP configuration files that enable physics and collisions on the scrotum, and optionally the shaft. With the new collision shapes introduced in 2.1, there now are semi-accurate collisions with your characters thighs. They are not perfect, however, and there are several "blind spots" where the balls will simply fall through your character like nothing was there. Acknowledgements EvilReflex for ERF Futanari CBBE SSE, TRX_Trixter for the Uncut version, pema123 for SMP config Submitter donnerwetter Submitted 08/28/2022 Category Adult Mods Requires SOS SE, Vaginaless 3BA v2, the original Futanari CBBE SSE SOS Addon Regular Edition Compatible No

[TRX] Futanari addon for 3BA Vaginaless v2 View File An edit of TRX_Trixter's TRX Futanari Addon specifically made to fit Vaginaless 3BA v2. Essentially a Vaginaless 3BA v2 version of my previous mod. NOTE: Requires original. Every variant is SMP-enabled dy befault. To disable SMP, do not install the physics config file and use the "SMP Collisions Object Off" zap slider in BodySlide. There are several files available. Below is a rundown of each. [TRX] Futanari addon for 3BA Vaginaless v2.1 Default Just the basic schlong addon edited to fit Vaginaless BHUNP. Comes with SMP support, but otherwise nothing fancy. [TRX] Futanari addon for 3BA Vaginaless v2.1 The glans has been separated into its own mesh with tweaked specular values, giving it a glistening wet look. SMP-enabled. [TRX] Futanari addon for 3BA Vaginaless v2.1 DW Pubes A version with the aforementioned wet glans edit and my 17(+17) pube styles and ball hair, selectable as BodySlide zaps. Separated into three different projects due to size. See screenshots section for previews of each style. SMP-enabled. [TRX] Futanari addon for 3BA Vaginaless v2.1 TRX Pubes A version with the wet glans and the four TRX Futanari Addon pubic hair by TRX_Trixter, selectable as BodySlide zaps. Note: The meshes for these styles do not show up in BodySlide. SMP-enabled. FW4 Versions You will notice that there are also versions of each of the above files marked "FW4". This is a reference to the FW4 foreskin slider. I like foreskin on my characters but due to the way that Skyrim's weight painting works, the glans will often clip through the foreskin when using TRX Futanari Addon's various foreskin sliders. On these versions, I made the FW1+2+3+4 sliders permanent and readjusted the sliders and weights accordingly to eliminate clipping issues. I made these for my personal use but I figure others might like to use it too. For additional foreskin related customisation I recommend my TRX Foreskin Overlays (assembly required): Note: Unfortunately, all of the above are simple BodySlide projects that output meshes that replace the schlong in the original TRX Futanari Addon. If you wish to turn these into separate addons, I recommend you see this tutorial for instructions: dw's Schlong Physics Selector FOMOD A FOMOD by tznvlw that allows you to select from 4 different SMP configuration files that enable physics and collisions on the scrotum, and optionally the shaft. With the new collision shapes introduced in 2.1, there now are semi-accurate collisions with your characters thighs. They are not perfect, however, and there are several "blind spots" where the balls will simply fall through your character like nothing was there.Also, it should be noted that these physics were made with the TRX-ERF Hybrid Schlong in mind and do not look as good with default TRX's scrotum shape, geometry and weights. Some comparison videos: Acknowledgements TRX_Trixter for TRX Futanari Addon, pema123 for SMP config Submitter donnerwetter Submitted 08/28/2022 Category Adult Mods Requires Original TRX Futanari Addon Regular Edition Compatible Not Applicable

SOS- Addon - Futanari CBBE SSE View File SOS- Addon - Futanari CBBE SSE DESCRIPTION: Futanari SOS SSE Addon for CBBE SE. Complete new made with 2k high resolution textures! Prebuild for Curvy CBBE or use your Bodyslide Preset to fit the Schlong to your Body. There are also custom shapes for Bodyslide! Textures looks best with: Fair Skin with goose bumps specular option and no subsurface scattering fix. Sorry no textures for argonians and khajiit (maybe later) REQUIREMENTS: Schlongs of Skyrim SE (Not needed if you use the equippable version) XP32 Maximum Skeleton Special Extended (Highly recommend to install the racemenu Plugin to change size, thickness and length) NOT REQUIRED BUT HIGHLY RECOMMENDED: BodySlide and Outfit Studio (Use your body shape presets to get the best result ingame) Q&A: How to get the equipable schlong? You can craft it at the tanning rack Can I use the Schlong as Sexlab strapon? yeahhowaboutnooo made a >patch< to use the equipable schlong as strapon . No female got the schlong. The possibility is set to 0%, if you want the schlong on all females you can change it in the MCM (Mod Config Menue) How to give a female NPC the schlong? Look at NPC ingame and mark it (default "N"), go to the "schlongs of skyrim" mcm and look if there is the name of the selected NPC and add the addon to it. Will there be a UUNP version? Nope Will there be a vanilla Skyrim version? Nope Will there be a version for vanilla skyrim? Nope and its not allowed to port it to LE! There is a visible gab to the body. The Schlong is pre build to fit to the standard CBBE SE "Curvy" Body, if you are using a other or own BodySlide Presets you need to use the same presets on the schlong. There is a visible seam to the body. The textures are made to fit to the fair skin textures (link above) and for the goose bumps option and standard subsurface scattering textures I uploaded an blender sample file and a video that shows a very easy way to make seamless textures for sos addons! Its not allowed to upload this file on other pages or using it in mod packs! Submitter EvilReFlex Submitted 12/24/2019 Category Adult Mods Requires Regular Edition Compatible No  

Hello! In the middle of working on a new install and I've come across an issue where SoS will appear in MCM, but there are no available schlongs to select regardless of race, gender or whether its player or an NPC. Im using UBE with the addon, plus I have the standard presets that get picked up on new game start, but they still do not appear in the MCM menu.

So to give context with my problem, I had spent months playing AE Skyrim as a male and I never once had issues with SoS physics and had it properly working with mods like HIMBO 4. and after months of playing male, I had decided to play female. This was about for two months of play with mods still working as intended. And just recently I decided to play a new game as a new male character only to find out that my SoS physics suddenly stopped working. I know that it still functions properly as the testicles still have the physics and aren't stiff, but the cock itself is. It's still able to move up and down and even works with PPA, but the dick itself is just.. stiff! I have no idea how to fix this issue, at first I assumed it was a bodyslide issue and I've updated to the latest HIMBO version and conducting my own tests with HIMBO I've come to the conclusion it isn't a bodyslide issue, let alone a HIMBO issue. I'm thinking it could be a skeleton overlap issue but I think I've fixed that too. I have no idea what is wrong with my SoS but it has completely lost its physics and I have no idea that the culprit is or how to fix it

Get the original Korean mod from here, then replace .esp with the edited one below: FutanariAccPack.esp

Have you ever wished you could use more than one version of the same schlong simultaneously? Maybe you want one that uses SOSmale.hkx and one to use SOSfemale.hkx. Maybe you installed my ERF Horse Penis Redux mashups and want to use more than one version at the same time. Well, I'm going to show the way I do it. Do note though that as the title says, this is the quick and dirty way, which means we are only duplicating and changing the absolute minimum amount of things necessary to get a separate schlong addon to show in the MCM and for it to use its own mesh and textures. All the other things that make up a schlong addon, such as potions and code related to gender and race probabilities will be left untouched and shared with the parent schlong. Presumably this will fuck with SOS mechanics that distribute schlongs to NPCs, but since I do not use those mechanics, I don't care. If you DO care about such things, you are welcome to duplicate, rename and then painstakingly reassign EVERYTHING in the addon. Anyway, we'll be using XEdit. Hope you have it installed (google for information on how to do so.) For this example, I'll be using the .esp from TRX Futanari Addon. Once you load the esp, it should look like this: What we need to do is duplicate the correct records to get a separate schlong addon with its own mesh and textures, I will start with the textures: If we were being thorough, we would duplicate each of these records. But since we're all about doing things as quickly and lazily as possible, I will only duplicate the "Default" Texture Set since I only play as human characters anyway. If you play as other races, you might want to duplicate the texture sets relevant to you. Regardless, right click on a texture set you want to duplicate and select "Copy as new record into" XEdit will ask you to change the EditorId. I am making a schlong addon for a character named Ayirah, so I will simply replace "Default" with "Ayirah". Next you will be asked which of the loaded files you want to add this new record into. We will choose the schlong addon we have been working on. Congratulations! You have made a new texture set. Now to change the texture paths- my character will only need separate diffuse and normal maps from the regular addon, so those are the ones I will be editing. I'm going to place her textures in a folder named "Ayirah" inside the regular texture folder. You will notice that I'll do the same with the meshes too. Next, we will go take a look at the Armor Addon records. Much like before, if we were being thorough, we would duplicate all 9 AA records, but again, I'll only need to duplicate the Default one for my purposes. (Your situation may be different) Duplicate and rename the record(s) you need the same way you did with the Texture Sets before. Then change the "Female world model" record (if this is a male addon, you will obviously need to change the male one instead) to point to the location you have chosen for the new mesh. Like I said, I'm just placing new folders inside the ones already existing in the mod and keeping the existing .nif name. The reason for this is that this way you don't need to rename the schlong .nifs once you have built them in BodySlide, just build them into the overwrite folder and place them inside the new folder you made. You will also need to alter the Female Skin Texture record and select the Texture Set you made previously. Next up is the Armor Record. Just like before, copy the record and rename it. Then in the Armature section, select the Addon(s) you made in the previous step. Now, we move on to the Faction record. This is what gives the addon the name it will be listed under in the SOS MCM. Once again, copy and rename the record. Afterwards, alter the text field next to Full - Name and give your new addon whatever name you wish. Finally, we can tackle duplicating the SOS Addon quest. After you've done so, find the SOS_Addon_Faction and SOS_Addon_Genitals properties and change them to the Faction and Armor (Note: Armor, not ArmorAddon! Make sure it has the ARMO prefix) you made in previous steps. Finally, give the quest a new name, save the .esp and exit XEdit. You're done! Now to check if our new addon works in game... success!