heshiko51 Posted July 15, 2021 Posted July 15, 2021 custom customizerでの影がonの状態で顔しか影が出ないのですが、どのようにすれば全身の影が出るのでしょうか？教えてください。 When the shadow of the custom customizer is on, only the face is shadowed. How can the shadow of the whole body be cast? please tell me. When the shadow of the custom customizer is on, only the face is shadowed. How can the shadow of the whole body be cast? please tell me.
fenix71 Posted July 15, 2021 Posted July 15, 2021 Hi can someone please help me I don't understand why I get this warning everytime I launch the game or press F10
Smollett13 Posted July 15, 2021 Posted July 15, 2021 (edited) 20 minutes ago, fenix71 said: Hi can someone please help me I don't understand why I get this warning everytime I launch the game or press F10 I went into d3dx.ini (in the vacation root dir) and found the hash for 4dd080ec95432a48. There should be about two places (as you can see from 20201105 and 1126). Underneath the two lines of code you find, I put an allow_duplicate_hash=overrule. Message went away but not sure that was totally the 100% right answer. I just noticed other shaders had the overrule instead of the duplicate. At the moment I have shader issues that cause a black screen and other problems but it was like this before I fixed the message. Not sure what I'm doing wrong but it looks like a complete mod backout until I can fix it. =( Fixed. I had to reload and reset (ctrl+alt+F10). Leaving note here in case someone else has a similar issue. Edited July 15, 2021 by Smollett13 3
fenix71 Posted July 16, 2021 Posted July 16, 2021 11 hours ago, Smollett13 said: I went into d3dx.ini (in the vacation root dir) and found the hash for 4dd080ec95432a48. There should be about two places (as you can see from 20201105 and 1126). Underneath the two lines of code you find, I put an allow_duplicate_hash=overrule. Message went away but not sure that was totally the 100% right answer. I just noticed other shaders had the overrule instead of the duplicate. At the moment I have shader issues that cause a black screen and other problems but it was like this before I fixed the message. Not sure what I'm doing wrong but it looks like a complete mod backout until I can fix it. =( Fixed. I had to reload and reset (ctrl+alt+F10). Leaving note here in case someone else has a similar issue. Thanks for the tip it worked with adding the 2 lines !
Tychedy Posted July 16, 2021 Posted July 16, 2021 Spoiler On 2021/7/15 at AM10点51分, aspidiske500 said: 你把Tsukushi的头发颜色mod去掉了吗？ 一些模组将状态保存在“d3dx_user.ini”中，但它说无法识别保存状态的模组。 如果你故意删除了mod，再次按“F10”，如果没有错误，我认为没有问题。 No, I didn't delete it. If I delete her hair mod, it will have another mod error. One by one. CTRL + Alt + F10 has not changed.
SPiCaq Posted July 16, 2021 Posted July 16, 2021 How can I solve this situation? I hope anyone who knows can tell me, thank you
aspidiske500 Posted July 16, 2021 Posted July 16, 2021 4 hours ago, SDY said: Reveal hidden contents No, I didn't delete it. If I delete her hair mod, it will have another mod error. One by one. CTRL + Alt + F10 has not changed. Is that so. I don't seem to be able to offer a solution. I'm sorry. Normally, pressing "CTRL + Alt + F10" deletes the "d3dx_user.ini" file itself, and if you change the state of some mod and then press F10, "d3dx_user.ini" is created again.
XOoOaX Posted July 16, 2021 Posted July 16, 2021 (edited) Quote 5 hours ago, SPiCaq said: How can I solve this situation? I hope anyone who knows can tell me, thank you What is that suit? I don't know the name. But if I guess from the photos, the body and suit don't match. It seems that the leg part needs to be modified. Quote On 7/15/2021 at 1:59 AM, chalombobo said: Is she honoka body? isn't she. Has a new character been created in Japan? It looks like a common body... isn't it? it matches Honoka's body. Edited July 16, 2021 by XOoOaX
tk2004 Posted July 16, 2021 Posted July 16, 2021 5 hours ago, SPiCaq said: How can I solve this situation? I hope anyone who knows can tell me, thank you I think it can be improved by using the following mesh editing techniques. I will explain briefly. You cut mesh at (1) in the image. Therefore, such a result is obtained. If I do, cut the mesh at (2) in the image. Spoiler 1
SSAA0306 Posted July 16, 2021 Posted July 16, 2021 日本語で失礼します。 このエラーの解決方法が知りたいです。 解る方がいれば、回答をお願いいたします。
ryuken3 Posted July 17, 2021 Posted July 17, 2021 Can anyone please make or give me advice on making Nanami and Elise 4k skin with pubic hair and tattoo?
Jerrry Cr21 Posted July 17, 2021 Posted July 17, 2021 me and updated my reshade graphic settings again, after i last updated it on 15 june 2021, and here is an overview of the settings i used and also a sample photo. If you are interested, please download the file below, thank you. JERRYCR21 SETTING DOAXVV 4.5..ini 15
Tychedy Posted July 17, 2021 Posted July 17, 2021 15 hours ago, aspidiske500 said: 是这样吗。 我似乎无法提供解决方案。 抱歉。 通常，按“CTRL + Alt + F10”会删除“d3dx_user.ini”文件本身，如果您更改某个模块的状态然后按 F10，则会再次创建“d3dx_user.ini”。 It seems that the user file cannot save the hair related settings?Because it only prompts for head related errors，Including these。 Spoiler
Tychedy Posted July 17, 2021 Posted July 17, 2021 On 2021/7/15 at AM10点51分, aspidiske500 said: 你把Tsukushi的头发颜色mod去掉了吗？ 一些模组将状态保存在“d3dx_user.ini”中，但它说无法识别保存状态的模组。 如果你故意删除了mod，再次按“F10”，如果没有错误，我认为没有问题。 If I didn't change any mod（I pressed Ctrl + Alt + F10）, it wouldn't go wrong But when I tried to save the settings, he made a mistake I deleted all the hair mod! I got this. Spoiler
Stocksman Posted July 17, 2021 Posted July 17, 2021 8 hours ago, SSAA0306 said: 日本語で失礼します。 このエラーの解決方法が知りたいです。 解る方がいれば、回答をお願いいたします。 Overwrite v1.1 files
Urfenn Posted July 17, 2021 Posted July 17, 2021 Is there some kind of mismatch between 3DMigoto 2.3 from the website and the update for it on mod manager? If I install the one from https://helixmod.blogspot.com/2018/03/dead-or-alive-xtreme-venus-vacation.html my costume customizer and some other mods mess up. However if I update from Mod Manager costume customizer is fixed along with other mods, but then different mods start acting up. I'm not sure if some of my files are corrupt or what's happening 1
SSAA0306 Posted July 17, 2021 Posted July 17, 2021 13 hours ago, Stocksman said: Overwrite v1.1 files thank you
xtech88 Posted July 17, 2021 Posted July 17, 2021 (edited) I needed reinstall the game and now Costume Customizer (v2.2.1) stop work. When press F3, this red line appear. 3Dmigoto 2.3 and VVMM1.4 installed. Help please!! Edited July 17, 2021 by xtech88
KuroKaze78 Posted July 18, 2021 Posted July 18, 2021 @xtech88 This is now the 4th time I've seen this reported. It's not directly tied to CC and seems more like an issue with PNG files in general. I've never had anyone get back to me on the problem, but seeing as its a fresh install, I'd wonder if you've re-installed/updated your graphics driver yet. Another instance of it being reported: And a later response from them which sounds like he fixed it some way? I know I had asked if they were able to open any of the PNG files in something like paint or not. So maybe clean/bare installations of windows doesn't include setting up enough of the basic features for it to support them before the game knows how to handle png files. 2
Jerrry Cr21 Posted July 18, 2021 Posted July 18, 2021 I updated the Reshade graphic settings, there were some additions to the curve effect and an increase in level and there are effects that I no longer use, namely FXAA for reviewers and sample photos can be seen below JERRYCR21 SETTING DOAXVV 5.0..ini 6
xtech88 Posted July 18, 2021 Posted July 18, 2021 1 hour ago, KuroKaze78 said: @xtech88 This is now the 4th time I've seen this reported. It's not directly tied to CC and seems more like an issue with PNG files in general. I've never had anyone get back to me on the problem, but seeing as its a fresh install, I'd wonder if you've re-installed/updated your graphics driver yet. Another instance of it being reported: And a later response from them which sounds like he fixed it some way? I know I had asked if they were able to open any of the PNG files in something like paint or not. So maybe clean/bare installations of windows doesn't include setting up enough of the basic features for it to support them before the game knows how to handle png files. Solved. Problem is C++ 2015. thx for attencion. 2
tk2004 Posted July 18, 2021 Posted July 18, 2021 (edited) 18 hours ago, Dj_Xtremo said: Help! The solution is to identify the mod that is include "Anaye.dds" and rewrite ini file in the mod. I don't know which mod, so it's just for reference. 1) Search for the ini file for the following description. Spoiler filename = Ayane.dds 2) For example, rewrite as follows. Spoiler filename =\Mods\hogehoge\Ayane.dds Edited July 18, 2021 by tk2004 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now