Jump to content

Recommended Posts

Posted

I'm so tired that I forget to activate my Overwrite patch for the HDT meshes converted in BodySlide, after activate it, no change, even with the UNP Special body selected, the neck seam is back again.

I've done another test, replacing the body meshes of every Bijin characters added by this AIO with the body meshes of my character, no change again. Of course the load order is ok... I think, my HDT armors meshes patch and my Bijin characters meshes patch are at the bottom of the left pane and the conflict informations says that it correctly overwrite the needed files.

 

Every step I do to try to solve this gap is a fail, I'm sure the problem is this HDT armors convertion because without it, with just this AIO pack installed, every NPCs are ok without any gap, but I'm unable to figure how to fixe it.

 

There is no gap for hands and feets no (Or just a small in some cases like on the previous screenshot about the neck).

 

I've try to do again all the steps from the start, here is the result.

 

First step :

- Installing your AIO with UUNP Special A (Don't matters if it's just for the physics right?), 4K textures, Fair Skin Complexion, Normal map set to Normal body, Specular to Silky, Subsurface to Subsurface Textures.

- Then Bijin Replacer 4K, then the option to replace all 3 Bijin mods.

- Accept request from Mod Organizer to replace all the files from the previous installation.

 

At this point, everything works like a charm, without the HDT on clothes/amors.

 

Second step :

- Open BodySlide, and select the UNP Special body, with the -Zeroed Sliders- preset.

- Activate the RaceMenu Morph, Batch build (With Shift) all armors and boots related to HDT for vanilla High Polygons armors and Immersive armors (I've not ticked the clothes/armors without the HDT tag and not ticked the UNP body parts), and export to the Overwrite folder in Mod Organizer.

- Create a separate mod from the Overwrite folder just to have a separate patch for the HDT clothes/armors.

- Run FNIS (Mandatory after each bodyslide step?)

 

Optionnal step :

- Replace all body meshes from each Bijin NPC folders with the player body meshes, and pack it in a separate mod like for the HDT BodySlide patch, and load it after.

- Run FNIS

 

Now, when I go in-game with only the AIO, it's ok.

Launch the game again with now the HDT Overwrite patch > gap for vanilla clothes/armors convertion.

Launch the game with the HDT Overwrite Patch and the Bijin meshes Patch > gap for vanilla clothes/armors convertion.

And it seems there is a glitch with the ranger armor too, but for the moment I really don't care about that.

 

I've tested multiple armors, and Immersive armors seems ok (Except some are not HDT, again, don't care for the moment), but vanilla armors convertion have the gap (tested with the barkeeper clothes and leather/fur armor). I think it's the reason why some NPCs of the Bijin mods are affected and others are not.

 

I've probably done something wrong but the Immersive armors convertion is working and I've batch build the two at the same time, so I've no idea how to fix this for the vanilla high polygon armors.

post-254976-0-00067000-1454877657_thumb.jpg

post-254976-0-57836500-1454877773_thumb.jpg

post-254976-0-42964000-1454877899_thumb.jpg

Posted

I heard alot of people had issues with gamefever's Vanilla High Polygon bodyslide mod.  Alot of seams and something else I forgot, I heard a few outfits don't work properly like the rest of the clothes, you should check out the comments section in that mod page. I think one guy posted info about which clothes dont work.

Posted

Hello,

 

Thank you for this great compilation and easy to use packaging.

 

I use the Bijin replacer for all the Bijin mods, all options in this AIO installer are correctly selected.

 

I notice that vanilla armors and Immersive armors don't have by default HDT bouncing effect so I decide to try the recommanded mods you speak about, the Enhanced High Polygons convertion and the Immersive Armors convertion.

 

FNIS is updated after the installation of the AIO and convertion for HDT bouncing, no errors and no crash in-game.

 

I'm using Mod Organizer, only one profile, but for testing reasons I've made a mod with the Overwrite folder placed at the bottom of my load order (On the left pane) for the AIO installation, and another patch for the HDT convertion, so I can switch for testing without doing all the stuff again.

 

Without the HDT convertion for vanilla armors and Immersive armors (Exept a little difference between the head and body texture color for some NPC, not a big deal, but really visible for the screenshot attached for Inga NPC), all works like a charm, and again, thank you for that.

 

But if I convert the armors (Or simply activate my Overwrite HDT patch in this case), I've a visible neck seam (See attached screenshot).

I've converted with BodySlide only the armors meshes, not the UNPxxx body mesh, with the following options :

- Outfit/Body > Unified UNP HDT

- Preset > -Zeroed Sliders-

- RaceMenu Morph activated

 

I've made another Overwrite patch loaded after the two previous mentioned, only for the body mesh in bodyslide (I know, I'm not supposed to do that because of this AIO already have a nice body preparated and it can broke everything, it was just for testing, and it change nothing to the problem).

 

I really don't know why this appens, and I've pass many hours trying to fixe it, without success, so I post here to ask some help if someone already have this problem or know how to solve it. I've search a bit in this topic but not see any answer, but I could be wrong.

 

I really enjoy the AIO you provide, but I'll enjoy it more with this HDT clothes/armors. I hope someone can help me, and if I miss some informations about my configuration or other stuff, feel free to ask me the missing stuff if this can help to analyze the problem.

 

Thank you :)

I ran to a similar problem. Tried everything and still didn't work but the problem went away when I loaded an earlier save

Posted

I heard alot of people had issues with gamefever's Vanilla High Polygon bodyslide mod.  Alot of seams and something else I forgot, I heard a few outfits don't work properly like the rest of the clothes, you should check out the comments section in that mod page. I think one guy posted info about which clothes dont work.

 

I asked Gamefever back when I was planning a "lore friendly" playthrough and basically he told me not to use it becasue it was unfinished, and unpopular so will remain that way for now at least. Uglykidcid said he is going to use that last I heard so if anyone is likely to take it up and manage it it's him, but he's on a month-long military tour to *CLASSIFIED* currently (Army Captain in the R&D, Area 51? Yeah he actually knows what's there... and it's boring and mundane, but the reason the army themselves leaked Area 51 and Roswell to begin with and had the same PR guys issue misleading statements on purpose... now that's more interesting), and after that he mentioned he might hit Oblivion first so... I would not hold your breath.

Posted

 

I heard alot of people had issues with gamefever's Vanilla High Polygon bodyslide mod.  Alot of seams and something else I forgot, I heard a few outfits don't work properly like the rest of the clothes, you should check out the comments section in that mod page. I think one guy posted info about which clothes dont work.

 

I asked Gamefever back when I was planning a "lore friendly" playthrough and basically he told me not to use it becasue it was unfinished, and unpopular so will remain that way for now at least. Uglykidcid said he is going to use that last I heard so if anyone is likely to take it up and manage it it's him, but he's on a month-long military tour to *CLASSIFIED* currently (Army Captain in the R&D, Area 51? Yeah he actually knows what's there... and it's boring and mundane, but the reason the army themselves leaked Area 51 and Roswell to begin with and had the same PR guys issue misleading statements on purpose... now that's more interesting), and after that he mentioned he might hit Oblivion first so... I would not hold your breath.

 

 

I mean I'm just gonna rely on advance 3d editor to make my high polygon uunp bodyslide version tbh.  Its alot of work but its better than not doing anything and besides I got time to spare...

Posted

Anyone have any idea what is causing this issue?

 

post-181460-0-52941400-1454902005_thumb.jpg

 

I have used CLAMS and disabled it when it started doing this hoping it was just that mod, however I started using this one and for some reason it does it too. I have the latest XPMSE and HDT physics extension. If you know how to fix it, could you please send me a pm on the website as I am currently very busy with work on can only get on here on the weekends. If not I'll just read after my post next time I'm on. Thank you

Posted

I've read in the comments that the High Polygons create a shadow glitch for some clothes meshes (and a solution appear in the comment but, I'm not the one who can do it :)), and I experience it, but I don't find other vanilla HDT converter so... I don't really have the choice. But if there is other vanilla convertions for the HDT UUNP body, be sure that I'm interested.

 

I don't want reveal armors or other non lore armors, not for this character's save (The vampire armor from the HPoly and the half visible nipples is the limit I don't want to cross), and I don't want to install CBBE just to solve that point.

 

So I think it's a dead end for that High Polygons mod, I'll search for an alternative but if you have propositions.

Thank you a lot again for the help, I'll be around for the next questions :)

Posted

 

help wolfs and Werewolf penis doesn't show up during sex any fix?

 

Did you install MNC at all? It is needed for creature sex based mods.

 

 

 

For Werewolves it's not actually, FNIS Creature is all that's needed along with SOS Full and oen of the three default dicks there, each of which will put dicks on werewolves. If you choose  a custom pecker like Leito's or Bad Dog's schlogns your werewolf has no schlong. Use Creature Framework + Sexlab Werewolves in that case.

 

Moreover it's the SOS dicks that have been replaced by this mod, not the Creature Framework ones, instructions specifically say to disable Werewolves from Creature Framework.

 

Also note that if you are using a non-standard werewolf replacer (anything but Howling or Mighty Beasts really) you migth have issues putting dicks on your werewolves (this goes doubly so for Creature Framework, if all your werewolves are Apex wolves Creature Framework will make them vanilla werewolves during sex, possibly invisible ones at that), you will certainly not get it on NPCs and may struggle getting it on PC. In theory La Femme Lycana for werewolf futa should work however on a PC.

Posted

Sorry for this possibly silly question, but how does this work as far as body goes, does it install its own, or should I install calientes, if I install calientes do I use bodyslide to make a preset first? And if I want TBBP does the CT77 preset from your installer use it or what should I do to get that to work?

 

You have to install CBBE + Bodyslide then everything comes packed in the mod, the UUNP sliders, the textures and the animated pussies, there are also a couple of extras...

Posted

CBBE & BodySlide are not mandatory. You need BS if you want to adjust or convert stuff. I personnaly don't have CBBE.

Posted

 

Sorry for this possibly silly question, but how does this work as far as body goes, does it install its own, or should I install calientes, if I install calientes do I use bodyslide to make a preset first? And if I want TBBP does the CT77 preset from your installer use it or what should I do to get that to work?

 

You have to install CBBE + Bodyslide then everything comes packed in the mod, the UUNP sliders, the textures and the animated pussies, there are also a couple of extras...

 

 

Bodyslide and Outfit Studio comes as it's own mod, not just bundled with CBBE, and the bundled one also has UUNP sliders.

Posted

was wondering if anyone experineced invisble female npc's when the hdt part is activated ?? so far i only noticed it happening on either dark elf mostly or khagitte argonians or other raced don't seem to be effected much.

Posted

was wondering if anyone experineced invisble female npc's when the hdt part is activated ?? so far i only noticed it happening on either dark elf mostly or khagitte argonians or other raced don't seem to be effected much.

 

In riften by any chance? Very common problem with HDT, not this mod's fault. If it's everywhere however, then something is wrong in your install.

Posted

was wondering if anyone experineced invisble female npc's when the hdt part is activated ?? so far i only noticed it happening on either dark elf mostly or khagitte argonians or other raced don't seem to be effected much.

It's going to happen occasionally, that and the "twerking" ass and spazzing tits. I don't think there is anything to be done about it, it's HDT in general and not this mod's fault.

Posted

 

was wondering if anyone experineced invisble female npc's when the hdt part is activated ?? so far i only noticed it happening on either dark elf mostly or khagitte argonians or other raced don't seem to be effected much.

 

In riften by any chance? Very common problem with HDT, not this mod's fault. If it's everywhere however, then something is wrong in your install.

 

I get this too, and it drives me nuts. As crude a solution as it is, I find turning off my PC and letting it cool down sometimes fixes it. And it's definitely worse in Riften, and when summoning female NPCs in combat. 

 

I'd sometimes like to dump HDT entirely, but too many of my save games become un-loadable without it.

Posted

Maybe it's the wrong section to post this, but I wanted to blend vagina textures from here with this mod (http://www.nexusmods.com/skyrim/mods/72091/?) and got myself confused. I downloaded TextureBlender from Nexus, but I don't have any UNPVagina.png or something similar to choose from... Am I missing something? I use CBBE body, by the way. And I don't want to see private parts without textures XD

Here's the options I have in TextureBlender:

 

 

a93888091977fb4ae77986c93009ebd8.jpg


 

Posted

Anyone have any idea what is causing this issue?

 

attachicon.gif2016-02-07_00001.jpg

 

I have used CLAMS and disabled it when it started doing this hoping it was just that mod, however I started using this one and for some reason it does it too. I have the latest XPMSE and HDT physics extension. If you know how to fix it, could you please send me a pm on the website as I am currently very busy with work on can only get on here on the weekends. If not I'll just read after my post next time I'm on. Thank you

 

 

If you're talking about the hip gaps that looks like a mesh/texture incompatibility i've had that before, make sure you're using cbbe skin textures if you're using a cbbe based body.

Posted

 

 

 

Haha yea i think i'll do without wet/cold it never really worked out for me anyways but aroused and frostfall yes so i think i'll probably have to do without the big battles and just look forward to the battles in each city do those run well for you in a heavily modded game at least?

 

No child replacers yet and i'm thinking about just ditching that anyways was thinking of putting RS children in again but idk it isn't one of my top priorities right now.

 

Did you just mean 18 gb X what i actually have for ram and vram? or just put 18gb?

 

As far as background processes i don't know what most of them do so i just leave them alone unless i recognize it, it usually says i'm at about 8-10% usage of ram before staring my game the only thing that is noticeable is cortana even though i have her off she still sits there in my task manager no matter how many times i end task, i've looked for a workaround on this on the net but didn't find anything reliable. I have before turned on msi on screen display and monitored statistics while running skyrim and my last game that i tried was around 200 mods and an enb and think was only using 3.5gb vram and 5-6gb ram.

 

And the enb's i'm using now is bleak(will probably switch to unbleak but i'm sure they use the same enb series version) but it says on the mod page 'just download whatever enb version we're at right now' i usually check what enbseries it says to download but most the time for presets it seems like those versions aren't available anymore on the enbseries site and have been replaced. realvision i like but Last time i had trouble with realvision running smooth whatsoever even just walking around with no one around plus since it relies on ELFX or Realistic lighting I was getting way too many flickering lights on the ground to not be annoyed.

 

 

I am not sure what you mean about big battles in cities, as there are none in the base game, on purpose. Civil War scenes in ciites (vanilla that's Whiterun and the captial fights) are not actually using the normal but instead another map that's changed out, same thing when you are werewolfing after the turning in the Underforge. You have to keep in mind Skyrim was designed for the 512 MB RAM X-Box 360 so that was the limitations that Bethesda had, which is why a lot of the other Civil War batltes in ciites that were planned like Riften was tossed out, the 360 just would not be able to run it. Now a PC can, if that fight is actually finished beyond what is in the files, and Civil War Overhaul does not fix it, that fight (and a lot of other stuff) is really bugged on that, do not use Civil War Overhaul until they fix it, for more info check this Reddit thread here, where ApolloDown admits as much and asks this guy to help finish up CWO, when that happens it'll be a must-have, but for now leave it out. So with that in mind, that the biggest fight you will ever have in a vanilla city is a vampire attack at night when most NPCs are off the streets, there's nothing to really worry about, if you end up with 20 FPS in your ciites that's fine, you're never going to actually need 60 FPS in there. Note that there is a bug with the Solitude worldspace, dragons can spawn in there randomly hunting you, and it's city limits are ignored as such by Deadly Dragons random spawns and such. If you get a dragon after you in Solitude, and you can't kill it really fast (like because you are a high level mage or have a really powerful poison) load before it spawned and fast travel out of there.

 

I meant 18 GB on the ENBoost setting. This is 16+6 GB which is 22 - 4 for what is needed for Win 10 and Skyrim to run = 18 GB.

 

The flickering lights in ELFX means you have installed it wrong. Your install order matters a lot in that, you need to put in ELFX after all of your texture mods and let it overwrite, because guess what the only actual lighting mod out there are ENBseries, ELFX is a texture shader mod, if you have it active and a papyrus tool like what comes with Sexlab Framework, and you go console and you click in the air above a roaring fire or inside an inn or vanilla Breezehome, you will see invisible ELFX particles that you hit insted of what was behind them like the character you wanted to click on, these particles are what is actually providing the shades to the textures there, and if you installed them in the wrong order, they will be flckering on and off, especially if you sidestep or the like looking at a light beam.

 

 

Hey all!

 

I noticed something that I feel I should mention concerning the CBBE body type. If this has been mentioned before, my apologies. At first I couldn't actually get the CBBE body to show in-game, only the vanilla body. After some investigation, I found the body files separated into a different folder than the other body parts, in a "characters" folder. After moving them into the "character" folder everything appeared just fine in-game.

I don't know if this is a user error or something else, but I thought it best to bring it up regardless. =-)

 

This has been mentioned a 2-3 pages pack, and comes up again like the Bijin mods being missing being mentioned every 5th post. It needs to go on the front page of things not to post on.

Really? Good to know. So I could just update my ENB, which I haven't done in forever, and use Real Vision while still getting the ENBoost? Good stuff. I'm not using 4k textures, I don't think my pc could handle all that, but even with 2k I rarely ctd. If I would say I had any problems, it would be that occasionally the game will ctd when I load a save initially. But once the game loads, it's pretty much all smooth sailing.

 

 

Correct, the 0.272 is gone from ENBDev's site but can be downloaded from RealVision's site, do not use the new one like it says on ENBDev, when I did that ENBoost stopped working for me with the settings in RealVision and I started crashing over and over.

 

 

That's what i meant was the civil war battles in the vanilla game like in whiterun, etc. I'm ditching 'war zones' and 'immersive patrols' because those were the places where it was really bad, and i put 18000(18 gb_ under VideoMemorySize in enblocal ini(that's the spot you meant correct?) but doesn't seem to stop that occassional hard stutter in town and riding up to whiterun stables on horse seemed to still be struggling once entering that cell is this normal? Also am using the correct version of ENB series now along with the enb preset.

 

Also someone mentioned to me that in my papyrus there is this

[CF][Framework] Already loaded file slnc-mnc-dg.json; skipping
[01/17/2016 - 12:55:01PM] [CF][Framework] Already loaded file slnc.json; skipping
[01/17/2016 - 12:55:01PM] [CF][Framework] Finished JSON registration
 
 [CF][Creature Apply] Failure on ["Imperial Soldier" [Actor < (6C060DAE)>]]; creature isn't registered

 

I have more nasty critters 9.3 and i have all in one animated pussy loaded after and overwriting, nothing else overwriting it as far as i can tell but maybe i have to change some options in the mcm menu? or if anyone has seen this before please do let me know.

Posted

 

was wondering if anyone experineced invisble female npc's when the hdt part is activated ?? so far i only noticed it happening on either dark elf mostly or khagitte argonians or other raced don't seem to be effected much.

 

In riften by any chance? Very common problem with HDT, not this mod's fault. If it's everywhere however, then something is wrong in your install.

 

 

No it was near a bandits camp and got several female npç approaching. i think when there are too many of them this occurs. Especially if they all decides to attack you at once. 

 

The last part was probebly my own fault i used mods that adds hdt on vanilla armor so every npc will also use them and that when it's happening if i don't use vanilla clothes on npc part and use just bethesda version without bouncing on them this does not occur but then there breast will not bounce either.. :D

Posted

Firstly,  HUGE Thank You to the folks doing so much to make life better in Skyrim for all of us that are "less-able".

 

I found this mod while updating/shopping for parts for a major rebuild of my mod loadout (oops, broke it! lol) and was very impressed by the number of skin texture options that are included in it.  I've been using this one since I first put mods into my Skyrim:  (from the nexus) (/skyrim/mods/4686/?)  and I am very fond of it.  (Partly because the human skin reminds me deliciously of a girl I spent many sunny afternoons very close to once upon a time)

 

Is there a combination of included textures/etc that would get me anywhere close to that one?

 

Or, is this a good time/place/method to request that texture be added to this mod, if possible?

Sadly, I cannot do anything toward doing it myself, due to a painful lack of time off work, technical skills, inclination, and mediocre computer equipment.

 

Humbly, Thank You!

Posted

Hi...

 

after finally succeeding in installing the mod :) i tried it...  but i think there's something wrong...  i suppose "my" pussy shouldn't look like in the attached pics... :(  so i also suppose i made some mistake missed something or forgot to do something...  what might it be ??

 

could someone help me, please

thanks :)

 

 

post-405367-0-61243200-1454970010_thumb.jpg

Posted

Just a suggestion if you are looking to include more textures for the next release.

Demoniac and Valhalla textures are pretty cool.

 

Demoniac are all included and valhalla are mature skin with pubic hair.

 

Hi...

 

after finally succeeding in installing the mod :) i tried it...  but i think there's something wrong...  i suppose "my" pussy shouldn't look like in the attached pics... :(  so i also suppose i made some mistake missed something or forgot to do something...  what might it be ??

 

could someone help me, please

thanks :)

 

This happens you because you aren't using the textures provided on my mod. Which texture are you using?

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...