CLAMS OF SKYRIM PROJECT Inni Outie HDT Vagina

[Gelubir]

OMG THANKS SO MUCH!

[Guest]

On 1/22/2018 at 2:30 AM, terrorofmorrowind said:

The main reason why i never really liked using your hdt settings is because for some reason the boobs keep falling sideways hile standing up. I'm pretty sure that is not what's supposed to happen. It's only now that i decided to update my body that i thought about trying again. Do you know how i can resolve this?

look at woman's boobs when they lie down on their back and then when they hang over forward .Cosio will never be perfect but i will try to get it perfect as much as possible ...i make the Y axes less stiff then the x and z and made Y axes travel more the other two ..this make them drop when standing up ,stretch down when the torso is hanging over and  collapse on them self when lying down on her back ..so you need to make y stiffer and travel less also you need to lower the travel value on x axes as well ..

 

using hdtHavokModifier open hdtphysicsExtentionsdefaultbbp.xml ...open constrains tab ...in Npc L/R breast  goto linear limits .....change linear max limits Y value 14 to 7 and X  value 8 to 4...in linear motor y and x change  spring constant value 1298 to 2700 or 2104...PS this will change how the boobs bounce . 2700 is how strong the spring is ,the same value as the breast weight and will make it bounce very fast  like silicon boobs 2104 value will make then bounce a little slower

 

also instead of all this just make the 14 on Y and 8 on X smaller and the 15 value on Z smaller ......you can also remove the angular limits motors and  set all other values to 0 ..no other hdt mod uses them ...personally i would not ..it will make them look very robotic

[ryonalice]

Amazing work!But there is something wrong with the boobs

 

[terrorofmorrowind]

5 hours ago, scivirus said:

look at woman's boobs when they lie down on their back and then when they hang over forward .Cosio will never be perfect but i will try to get it perfect as much as possible ...i make the Y axes less stiff then the x and z and made Y axes travel more the other two ..this make them drop when standing up ,stretch down when the torso is hanging over and  collapse on them self when lying down on her back ..so you need to make y stiffer and travel less also you need to lower the travel value on x axes as well ..

 

using hdtHavokModifier open hdtphysicsExtentionsdefaultbbp.xml ...open constrains tab ...in Npc L/R breast  goto linear limits .....change linear max limits Y value 14 to 7 and X  value 8 to 4...in linear motor y and x change  spring constant value 1298 to 2700 or 2104...PS this will change how the boobs bounce . 2700 is how strong the spring is ,the same value as the breast weight and will make it bounce very fast  like silicon boobs 2104 value will make then bounce a little slower

 

also instead of all this just make the 14 on Y and 8 on X smaller and the 15 value on Z smaller ......you can also remove the angular limits motors and  set all other values to 0 ..no other hdt mod uses them ...personally i would not ..it will make them look very robotic

Thanks for the answer. I don't think the problem lies with your settings at all it was just because the bodyslide settings i use made the boobs come too close together which caused them to go sideways while standing up. I made a preset that made more space there so it should resolve itself. i just have to test it out. If you are curious what i did i could sent you my bodylside preset.

[terrorofmorrowind]

3 minutes ago, ryonalice said:

Amazing work!But there is something wrong with the boobs

 

Have you done anything with the fantasy slider setting in bodyslide? I have had this happen before to me too. I either set it to - values but then boobs get too saggy so sorta learned to live with it.

[ryonalice]

10 minutes ago, terrorofmorrowind said:

Have you done anything with the fantasy slider setting in bodyslide? I have had this happen before to me too. I either set it to - values but then boobs get too saggy so sorta learned to live with it.

I've never done that,look the preview in bodyslide

[terrorofmorrowind]

30 minutes ago, ryonalice said:

I've never done that,look the preview in bodyslide

oh, i see. Perhaps try putting the fantasy one -50% or something. It used to get rid of that "knick" for me in the past, although it won't dissappear entirely. To counter the negative value, try putting breastflatness to 25%-50% or maybe BreastsSH instead. Either way should work to compensate for the negative value.

 

edit: My bad i forgot that Flatness is an inverted slider so instead of 25%-50%, it should be -25%-50% (i checked it in bodyslide, i recommend using -25%. Breasts SH looks weird so just use the flatness one).

[Guest]

1 hour ago, ryonalice said:

Amazing work!But there is something wrong with the boobs

 

what body is this normal cosio or cosio HD ..if it is HD it might be because of the weights on the HD body  is completly different to the old Cosio and cbbe ..it impossible to copy from a low to a hi resolution weights ..its not sliders as they are identical or close to it

[ryonalice]

8 hours ago, terrorofmorrowind said:

oh, i see. Perhaps try putting the fantasy one -50% or something. It used to get rid of that "knick" for me in the past, although it won't dissappear entirely. To counter the negative value, try putting breastflatness to 25%-50% or maybe BreastsSH instead. Either way should work to compensate for the negative value.

 

edit: My bad i forgot that Flatness is an inverted slider so instead of 25%-50%, it should be -25%-50% (i checked it in bodyslide, i recommend using -25%. Breasts SH looks weird so just use the flatness one).

Thanks,but minimum value of sliders is 0，how can i adjust it to -50%?

[ryonalice]

7 hours ago, scivirus said:

what body is this normal cosio or cosio HD ..if it is HD it might be because of the weights on the HD body  is completly different to the old Cosio and cbbe ..it impossible to copy from a low to a hi resolution weights ..its not sliders as they are identical or close to it

Thanks for your replying.It's HD.So the problem can't be sovled?

[sfeile]

1 hour ago, ryonalice said:

Thanks,but minimum value of sliders is 0，how can i adjust it to -50%?

Just type it in the display box for the value.

[ryonalice]

15 minutes ago, sfeile said:

Just type it in the display box for the value.

WOW...I see....that's cool

[ryonalice]

17 hours ago, terrorofmorrowind said:

oh, i see. Perhaps try putting the fantasy one -50% or something. It used to get rid of that "knick" for me in the past, although it won't dissappear entirely. To counter the negative value, try putting breastflatness to 25%-50% or maybe BreastsSH instead. Either way should work to compensate for the negative value.

 

edit: My bad i forgot that Flatness is an inverted slider so instead of 25%-50%, it should be -25%-50% (i checked it in bodyslide, i recommend using -25%. Breasts SH looks weird so just use the flatness one).

I did it as you said,but the boobs look the same as before

[Guest]

9 hours ago, ryonalice said:

Thanks for your replying.It's HD.So the problem can't be sovled?

i have to test this perhaps if you can give me your preset ..it might reveal the problem

[ryonalice]

10 minutes ago, scivirus said:

i have to test this perhaps if you can give me your preset ..it might reveal the problem

Thanks

ryonc.xml

[Guest]

18 hours ago, ryonalice said:

Thanks

ryonc.xml

ok it not sliders .... i asume the screen shots was taking while the breast is moving up wards during a bounce ...if so it is the weight like a said before it will take fine tuning and time to get it right ...took me 3 months to get it good enough ...like i said i cant copy the default Cbbbe weights as it is low resolution compared to cosio HD  ..for example 9 pologons of cosio HD fit in 4 normal cbbe polygons and it changes on other areas...to put in perspective if a value of 0.001 difference can have a big bump compared to a vertices next to it .1 is the highest value  ...

[blee717]

I have a problem. It was working a few days ago but then I went into bodyslide and the texture isn't there. How do I fix it?

[ryonalice]

8 hours ago, scivirus said:

ok it not sliders .... i amuse the screen shots was taking while the breast is moving up wards during a bounce ...if so it is the weight like a said before it will take fine tuning and time to get it right ...took me 3 months to get it good enough ...like i said i cant copy the default Cbbbe weights as it is low resolution compared to cosio HD  ..for example 9 pologons of cosio HD fit in 4 normal cbbe polygons and it changes on other areas...to put in perspective if a value of 0.001 difference can have a big bump compared to a vertices next to it .1 is the highest value  ...

OK...

[Guest]

5 hours ago, blee717 said:

I have a problem. It was working a few days ago but then I went into bodyslide and the texture isn't there. How do I fix it?

what texture mods are you using ?

[Guest]

a Patch for Pure skin has been Uploaded

[Guest]

On 1/20/2018 at 12:44 PM, servent9 said:

may i suggest you to make chsbhc tbbp body clam version?

 

https://www.loverslab.com/files/file/1659-chsbhc-tbbp-pregnant-body-armour/

 

from this mod. i like to see chsbhc pregnant body with hdt vagina

 

anyway great work!

chsbhc is a very old Cbbe body ,since Cosio is based on cbbe and is basically already what you ask for and  has pregnant function i see no point to do this sorry

[egon123]

So far that HD Body looks really good.

Is there any noteable performance drop to be expected?

[Guest]

13 minutes ago, egon123 said:

So far that HD Body looks really good.

Is there any noteable performance drop to be expected?

NONE.... MAYBE when you remove main armor piece it could drop a frame for a sec on very low end PC and i am talking about very old ...and if you have 100 or so naked NPC in the same cell ...the HD  body is used only when naked anyway

[packprof]

Just tried the HD body.  It would appear to have some holes in the mesh.   Is this something I did or is it in the nif file?

 

[\spoiler]

[quietboy]

This mod is amazing when I have it working properly and not conflicting with textures from something else. Any chance there will be a SSE version of this mod?