Jump to content

Cumshot 2.3 (FINISHED, DISCONTINUED)


Recommended Posts

Posted
1 hour ago, Erstam said:

"the robes appear"... you mean the actor is redressing? Does this happen in a SexLab or FlowerGirls scene?

Yes, Sexlab.
In all scenes, including solo scenes

Posted
8 hours ago, DaemonFelix said:

Yes, Sexlab.
In all scenes, including solo scenes

Okay, SexLab. Then there isn't much I can do. The basic mechanism there hasn't changed from previous versions, and SexLab Cumshot has been out for a couple years now. It must be something on your end. If your actor cums as expected and redresses while the animation is still playing, it's probably an outfit or equipment manager that interferes here. Check if you have one of those mods installed, deactivate them, and see if it solves your problem.

Posted

Well, I was using the 1.7.3.7 ver, uninstalled, and just changed to 2.0

Got the same redressing problem during final stage on SL scene

This didn't happen when I used 1.7.3.7 though

Posted

Same here with the insta redressing on last stage of SL effect starts. using sexlab as well. When I installed 1.7.3 it worked perfectly fine but when I installed 2.0 it went back to the insta redressing bug.

Posted
6 hours ago, faustlerano said:

"I have a problem. In the final stage of the animation, at the very moment the actor ejaculates, the robes appear."

 

Same problem.

Same problem on SE.

Posted

I've seen that SexLab "Premature Redressing Syndrome" now myself. It only happens on ejaculating NPCs, not on the player. I have a quick fix for it attached to this post. However, before I release a proper update I have to check and make sure that this change doesn't in turn break Flower Girls.

 

If you now see cumshots remain on NPCs after the end of a SexLab scene, increase the "Ejaculation delay" setting in Cumshot's MCM. A value of 0.30 seconds did it for me in my own game.

 

>> attachment removed - fix is included in version 2.0.1 <<

 

Posted

Did more testing. The fix doesn't hurt FlowerGirls, that's good. However, there is another problem on the FlowerGirls side that I need to think about. It's because in solo scenes FG doesn't send the orgasm event at the right time. I'm using the stage event to work around that, but I didn't want the orgasm event to be completely ignored - in some cases (OSex scenes?) it might be the only one that is fired. Currently I'm using it with the "Always show ejaculation" option, but that means that masturbating actors will ejaculate too early when this option is set. Long story short, don't expect the 2.0.1 update before tomorrow.

Posted

Updated to 2.0.1

 

That went smoother than I thought. The "premature redressing syndrome" is now fixed (FG scenes were also affected, it just wasn't as apparent).

 

On the FlowerGirls side, I managed to improve the stage detection logic so you can use either the climax or the stage event - in both cases actors should cum at the right time. There's a new MCM option for that.

Posted

Hey,

 

uninstalled the old version, made a clean save, installed the new one, but my MCM says no framework detected (even tho i have SL 1.62, also chose SL version during install) I can't seem to find the 4 method choice anywhere either. Am I missing something or did I dun goofed somehow? Thanks.

Posted

If Cumshot finds SexLab.esm active in your load order, then it should detect it. It doesn't work with SexLab Light, though. Also, you don't need to make a clean save - just replace the mod, load a save, and wait for the MCM to update. You can find the method choice on the second page of Cumshot's MCM, "Visuals".

Posted
13 hours ago, Erstam said:

Updated to 2.0.1

 

That went smoother than I thought. The "premature redressing syndrome" is now fixed (FG scenes were also affected, it just wasn't as apparent).

 

On the FlowerGirls side, I managed to improve the stage detection logic so you can use either the climax or the stage event - in both cases actors should cum at the right time. There's a new MCM option for that.

Just installed 2.0.1 and am experiencing the "premature redressing".

 

Note a couple things, just in case they matter:

 

1) I had never previously used 2.x, and had previously used SL Cumshot 1.7.2, which I uninstalled, clean saved and used a script cleaner to remove any trace of prior to installing 2.0.1

 

2) The archive crashed MO every time I tried to open it.  That is new & unique behavior in my experience.  I am using the original MO though, so maybe that's why?  Either way, I unpacked the archive and set it up myself using the folder names as guides.  Once unpacked, MO had no trouble with it.  Maybe its a fomod-related issue?

 

3) Using LE with SL

 

4) Set it to drop effect, otherwise default settings.  Looked great while it lasted, but the redressing happened.

 

Thanks for this mod and looking forward to more adventures with it -- I'll just make sure to completely unequip anyone prior to the event.

Posted

The archive crashed MO? Can't confirm that. I'm using the original MO for Oldrim as well, and I just tried reinstalling Cumshot for LE with and without the SexLab option - no problems here. Try redownloading the archive, maybe it got corrupted. For LE version with SexLab support you need folders 00, 10, 21, and 30 (use 20 instead of 21 if you don't have Dawnguard).

 

The redressing now should only happen if an NPC ejaculates a second time during a scene, or when you use the hotkey while he's in a scene, but in this case only after ejaculation has finished. That's engine behavior, and it's hard to work around that - not worth the trouble I think, singe these cases normally won't occur.

Posted
5 minutes ago, Erstam said:

The archive crashed MO? Can't confirm that. I'm using the original MO for Oldrim as well, and I just tried reinstalling Cumshot for LE with and without the SexLab option - no problems here. Try redownloading the archive, maybe it got corrupted. For LE version with SexLab support you need folders 00, 10, 21, and 30 (use 20 instead of 21 if you don't have Dawnguard).

 

The redressing now should only happen if an NPC ejaculates a second time during a scene, or when you use the hotkey while he's in a scene, but in this case only after ejaculation has finished. That's engine behavior, and it's hard to work around that - not worth the trouble I think, singe these cases normally won't occur.

Thanks for the quick reply.

 

1) I downloaded it twice, same result both times.  Must be on my end.  *shrug*

 

2) The folders you suggested were the ones I used; thanks for labeling them.

 

3) It was in fact a second ejaculation, as I was trying to adjust the stage alignments and hopped back and forth a bit.  Without looking at how it works, it just seems odd as I never had the redressing issue with the old cumshot v 1.7.2, and I used that regularly.

 

Regardless, thanks for the answers and I appreciate the work you are doing.

 

EDIT: And not that it matters, but here's the crash.

 

1Capture.JPG

Posted
11 minutes ago, Seijin8 said:

3) It was in fact a second ejaculation, as I was trying to adjust the stage alignments and hopped back and forth a bit.  Without looking at how it works, it just seems odd as I never had the redressing issue with the old cumshot v 1.7.2, and I used that regularly.

I think I can fix that for SexLab-induced ejaculations by changing a few lines... makes the whole process a bit more messy though, so it will need a lot of testing. I'll put it on the list for next update, but first I'm going to wait if other issues crop up.

Posted
8 hours ago, Erstam said:

If Cumshot finds SexLab.esm active in your load order, then it should detect it. It doesn't work with SexLab Light, though. Also, you don't need to make a clean save - just replace the mod, load a save, and wait for the MCM to update. You can find the method choice on the second page of Cumshot's MCM, "Visuals".

That's strange, I have SexLab.esm (I'm playing oldrim so I don't even know if there's a light version for that) active and it does not detect it, I also have no pages to choose from in the MCM menu.

Posted
1 hour ago, 3feetDonger said:

That's strange, I have SexLab.esm (I'm playing oldrim so I don't even know if there's a light version for that) active and it does not detect it, I also have no pages to choose from in the MCM menu.

Sorry I can't help you more. Your MCM says that there's no framework detected, so you do have the new MCM. But that it has no pages... I can't see how that can be possible. Unless you have the "ERROR" page where it says that vital dependencies are missing. Something must be seriously messed up in your game.

 

EDIT: Most likely the whole initialization did not happen (you probably have an empty pages array, and of course the frameworks won't be detected as well). I recommend to uninstall Cumshot, clean your save, and install again.

Posted
18 minutes ago, Erstam said:

Sorry I can't help you more. Your MCM says that there's no framework detected, so you do have the new MCM. But that it has no pages... I can't see how that can be possible. Unless you have the "ERROR" page where it says that vital dependencies are missing. Something must be seriously messed up in your game.

No worries, I'm baffled myself, as I have reinstalled my skyrim pretty recently, so I'm betting on a conflict with an another mod. Well, thank you anyways, I'm gonna keep banging my head against the wall until it works. 

Posted

For anyone interested, I've built a personal version for Sexlab on top of the 2.0.2 version.

 

These are the things I've added:

  • Added a MCM toggle option to apply cum effects on manual cumshots (hotkey).
  • Above feature will also play the "Hot" voice sound for the characters during the cumshot.
  • Added a MCM keybind for applying cum effects without the cumshot (for those who like to apply them manually on situations where a cumshot wouldn't make sense).
  • Added option "Disabled" to detect orgasm menu (useful if you don't want cumshot to trigger on a Sexlab orgasm event).

I am however having trouble rendering cum for all types in TFC. Works fine in 1st and 3rd persons.

 

 

Posted

Nice. I didn't expect someone to build upon my mod so soon. Keep it up. I don't plan on adding more features anyway, further updates will only happen for important bug or compatibility fixes.

 

Player model usually won't update in TFC mode unless you call QueueNiNodeUpdate() on the player.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...